Absorption of selenium by Lactuca sativa as affected by carboxymethylcellulose

Several organic compounds of high molecular weight present in soil interact with selenium and may act as active binding agents affecting its availability in soil, and, consequently, selenium uptake by plants. This study is aimed at investigating the effects of polysaccharides on selenium speciation in soil and on selenium absorption by Lactuca sativa L. plants. Three-week-old seedlings were transplanted into pots filled with soil, and sodium selenite at rates of 1.5 and 5mgSekg(-1) of soil, or sodium selenate at a rate of 1.5mgSekg(-1) of soil were applied. Carboxymethylcellulose (CMC) was added to the soil at rates of 0, 3 and 30mgkg(-1) of soil. After 48 and 110d from transplanting plants were harvested, separated into root and shoot, and fresh and dry matter weights were recorded. Total selenium was determined in both soil and plant samples. A sequential extraction was used to investigate the different Se oxidation states and assess the availability of Se in soil after the final harvesting. Both selenite and selenate were absorbed by roots, but plants amended with Se(VI+) showed higher selenium concentration than plants amended with Se(IV+). Selenite appears to be less mobile than selenate both in soil and plants. The addition of carboxymethylcellulose to soil decreased the amount of selenium absorbed by plants. CMC interacted with Se, making it less mobile as evidenced by the increase in the insoluble fractions. The insoluble Se forms in soil may represent environmental Se sinks potentially available for plants if the substrate is re-used for subsequent growth cycles and selenium species are mobilized as a result of biological and chemical processes.     

Assessment of Arsenic Losses during Ashing: A Comparison of Two Methods Applied to Atmospheric Participates

A comparison was made of over 300 pairs of arsenic results from instrumental neutron activation and flameless atomic absorption analyses of atmospheric particulates collected on glass fiber filters. Atomic absorption analyses involved low temperature ashing of filters at high power levels. No matrix modification chemicals were added to the acid extract which was analyzed. Neutron activation results are on the average 9% higher than those obtained by atomic absorption and the difference is statistically significant. This small difference is probably due to the analytical techniques or acid extraction and not in any important way to losses during low temperature ashing. This conclusion is in sharp contrast to other recently reported situations where low temperature ashing losses in analyzing atmospheric particulate were sizable. Although the atmospheres sampled differed somewhat between these situations the most obvious difference was in the combustibility of the filters used in sampling.     

Phytoremediation of selenium by two helophyte species in subsurface flow constructed wetland

The phytoremediation of selenium by two different wetland species was investigated. Selenium (20.4 microg/l) was supplied continuously to subsurface flow constructed wetlands, one vegetated with Typha latifolia L. and the other with Phragmites australis (Cav.) Trin. ex Steud. The beds of both species had same hydraulic loading rate (0.079 m(3)/m(2)/d) and water retention time (24 h). However, the mass loading rate was 1.27 mg Se/m(2)/d for Phragmites and 1.35 mg Se/m(2)/d for Typha. In the Typha bed Se migrated faster than in the Phragmites bed. After 25 d of Se supplementation in the Typha bed about 54% of the Se inlet concentration remained in the outlet water. In the Phragmites bed Se was removed completely from the water after passing through 3/4 of the bed length. After 65 d of Se supplementation the highest amount of Se (2.8 microg/g dry matter) was determined in the organic material of the Typha bed. Roots and rhizomes accumulated 2.2 and 1.8 microg/g dry matter respectively. Phragmites accumulated Se in the leaves and stems, but not in the rhizomes. The accumulation in the leaves (1.8 microg Se/g dry matter) was three times higher than in the stems (0.6 microg Se/g dry matter).     

Specific accumulation of mercury and selenium in seabirds

Total mercury (T-Hg), methyl mercury (MeHg) and selenium (Se) concentrations were determined to elucidate the relationship between Hg and Se levels in the liver of 10 seabird species. Highest concentrations of T-Hg (mean 267 microg/g dry wt), MeHg (mean 25.5 microg/g dry wt) and Se (mean 113 microg/g dry wt) were in the liver of black-footed albatross (Diomedea nigripes). An equivalent molar ratio of 1:1 between T-Hg and Se was found in the liver of individuals which contain over 100 microg Hg/g. However, such a relationship was unclear in other individuals which had relatively low Hg levels. This suggests that Se plays a role in Hg detoxification for those individuals with high Hg. In seabird tissues, Hg and Se levels should be a most important factor determining the relationship between Hg and Se, and fluctuation of Hg burden through molting and the species-specific demethylation capacity would also influence their relationships.     

The Effect of Rapid Transit on San Francisco Bay Air Quality

Classical procedures for the microdetermination of fluoride in vegetation are extremely time consuming. They generally involve ashing, fusion with alkali, distillation, and finally fluoride estimation. Sample size requirements for such procedures are on the order of a gram or more, making the procedure useless for determining low fluoride concentrations in small samples. A procedure for micro-fluoride determination in vegetation is proposed which utilizes the oxygen flask combustion technique (Schoniger flask). The gaseous products of combustion are absorbed in 10.0 ml of 0.05N sodium hydroxide containing 1.00 µg of fluoride. The analysis of the fluoride is performed directly on the absorption solution after addition of a combination complexing-buffer solution, using a specific fluoride ion electrode. The sensitivity of the electrode is such that 0.2 µg of fluoride can be easily detected in this volume. Added oxidant was required in the combustion step for some vegetation samples to completely free the fluoride from its organic matrix. Comparisons with the standard Willard-Winter procedure gave excellent results. Combustion of sodium fluoride standards as well as submicrogram quantities of a fluoro-organic compound showed recoveries greater than 90%. The direct combustion, coupled with fluoride ion electrode determination, reduces analysis time drastically. A complete analysis can be performed in 1/2 hr, with a minimum amount of equipment.     

Study on transformation and enrichment behavior of selenium in particulate matter in combustion flame

An ethylene/air inverse diffusion flame (IDF) burner was employed to generate a stable flame, and selenium was introduced into the combustion flame in vapor phase under different air-fuel ratio (A/F) with SO2 additive. At different height above burner (HAB) along the flame edge, selenium of different speciation (gaseous selenium and particulate selenium) was sampled via the U.S. EPA method 29, and the samples were determined by hydride generation atomic fluorescence spectrometry (HG-AFS), in order to study the mechanism of transformation and enrichment behavior of selenium during the combustion process. The results showed that selenium presented in vapor phase, crossing the flame into air, which means gaseous phase is the main form of selenium during combustion process. Both gaseous selenium and particulate selenium increased with elevated temperature from 820K to 1650K, suggesting that higher temperature is beneficial to the release of selenium. Low concentration of sulfur dioxide would increase the concentration of particulate selenium and gaseous selenium, and accelerate the release of selenium.

Implications: The enrichment behavior of selenium and its transformation in combustion flame were studied. The results showed that gaseous selenium is found in higher quantity in compared to particulate selenium during combustion. Higher temperature and air–fuel ratio will cause an increase in the formation of selenium. While the presence of sulfur dioxide in a range of 0–200 ppm will promote the release of selenium, higher sulfur dioxide level in a range of 200–350 ppm will have a reverse effect.     

Phytoextraction crop disposal--an unsolved problem

Several methods of contaminated crop disposal after phytoextraction process (composting, compaction, incineration, ashing, pyrolysis, direct disposal, liquid extraction) have been described. Advantages and disadvantages of methods are presented and discussed. Composting, compaction and pyrolysis are the pretreatment steps, since significant amount of contaminated biomass will still exist after each of the process. Four methods of final disposal were distinguished: incineration, direct disposal, ashing and liquid extraction. Among them, incineration (smelting) is proposed as the most feasible, economically acceptable and environmentally sound.     

Relation of length and sex to selenium concentrations in mosquitofish

Analysis of mosquitofish, Gambusia affinis, has proven useful for monitoring contaminant levels in aquatic biota; however, the small size of this species often requires the compositing of several fish to provide sufficient biomass for selenium analysis. Such composites have usually been obtained without considering the length and sex of the individual fish. The present study found significant differences in mean lengths and sex ratios of mosquitofish sampled with small-mesh dip nets from five sites close to each other in the San Joaquin Valley, California. To test the effect of these different sample characteristics, fish from each site were divided by sex into five size classes (<20, 20-30, 31-45, 46-60, and >60mm total length) before analysis for total selenium. Altogether, fish from the San Luis Drain and Kesterson Ponds 2 and 7 contained 65-360 microg g(-1) selenium (dry weight basis), or about 28- to 300-fold more than concentrations in fish of the same length and sex from the Volta Wasteway and Volta Pond 26. Except for females 31-45 mm long from the San Luis Drain that had higher concentrations than either smaller or larger females, selenium concentrations did not differ significantly among size classes. Although concentrations differed between sexes in samples from the San Luis Drain, Kesterson Pond 2, and Volta Pond 26, neither males nor females consistently had the higher concentrations. In the San Luis Drain, 20-30 and 31-45 mm long females had higher concentrations than did males of the same size classes; in Kesterson Pond 2 and Volta Pond 26, however, 20-30 mm long males had higher concentrations than did females of the same size class. Although no consistent patterns were observed, the occasional differences in selenium concentrations in fish of different length and sex indicate that these variables should be considered when surveys and monitoring studies are designed.     

Transfer of selenium from prey to predators in a simulated terrestrial food chain

Little is known about the accumulation and effects of selenium in reptiles. We developed a simplified laboratory food chain where we fed commercial feed laden with seleno-D,L-methionine (30 microg/g dry mass) to crickets (Acheta domestica) for 5-7 d. Se-enriched crickets (approximately 15 microg/g Se [dry mass]) were fed to juvenile male and female lizards (Sceloporus occidentalis) for 98 d while conspecifics were fed uncontaminated crickets. Lizards fed contaminated prey accumulated Se concentrations ranging from 9.3 (in female carcass) to 14.1 (in female gonad) microg/g compared to <1.5 microg/g in tissues of controls. Female gonad concentrations approached the highest of thresholds for reproductive toxicity in oviparous vertebrates. However, we observed no consistent effect of dietary treatment on sublethal parameters or survival. Our simplified food chain proved to be an ecologically relevant method of exposing lizards to Se, and forms the foundation for future studies on maternal transfer and teratogenicity of Se.     

Soluble and insoluble fractions of heavy metals in wet and dry atmospheric depositions in Bologna,Italy

Atmospheric depositions were collected monthly using a modified wet and dry sampler (dry deposition was collected on a water surface) located in Bologna, a northern Italian urban area, to evaluate the impact of airborne heavy metals on the local pollution load. Wet deposition samples were filtered and heavy metal contents in soluble and insoluble fractions were determined. The same procedure was applied to the water samples which collected dry deposition. The entire procedure was tested using a certified reference material (CRM), which provided satisfying recovery results. The percentage of heavy metal soluble fraction in dry deposition was generally lower than in wet one; Cd, V, Cu and Zn showed a higher average solubility than Cr, Ni and Pb both in wet and dry deposition. Factor analysis, after a varimax rotation of principal components, suggested possible anthropogenic sources which explain different metal deposition patterns. This data analysis also allowed to distinguish different clusters formed by monthly fluxes of heavy metals.     

Is selenium affecting body condition and reproduction in boreal breeding scaup, scoters, and ring-necked ducks?

Elevated levels of selenium (Se) have been detected in wintering and spring-staging lesser scaup. Here, we compared spring scaup Se and mercury (Hg) levels to those of ring-necked ducks and white-winged scoters, species exhibiting increasing and decreasing boreal populations, respectively. Mercury concentrations were low in all three species. Geometric mean (95%CI) liver Se concentrations were 6.2 (5.5-7.0), 4.6 (4.0-5.4), and 32.6 (28.4-37.3)mg/kg dry weight (dw) in scaup, ringnecks and scoters, respectively. Only scoter livers (66%) were above 33 mg/kgdw Se. Scaup and ringneck Se levels were unrelated to breeding status or lipid and protein levels; breeding scoters and females with greater lipid mass had higher Se than non-breeders. Egg and follicle concentrations in scaup and scoters were normal (mean [95%CI]=2.3 [1.9-2.6] and 2.4 [2.1-2.7]mg/kgdw, respectively). Overall, we found no support for a relationship between selenium and boreal scaup and scoter declines, and discuss current Se threshold concentrations.     

Reduction of selenite to red elemental selenium by moderately halotolerant Bacillus megaterium strains isolated from Bhitarkanika mangrove soil and characterization of reduced product

Two Gram (+) bacterial strains, BSB6 and BSB12, showing resistance and potential for Se(IV) reduction among 26 moderately halotolerant isolates from the Bhitarkanika mangrove soil were characterized by biochemical and 16S rDNA sequence analyses. Both of them were strictly aerobic and able to grow in a wide range of pH (4-11), temperature (4-40 °C) and salt concentration (4-12%) having an optimum growth at 37 °C, pH ∼7.5 and 7% salt (NaCl). The biochemical characteristics and 16S rDNA sequence analysis of BSB6 and BSB12 showed the closest phylogenetic similarity with the species Bacillus megaterium. Both the strains effectively reduced Se(IV) and complete reduction of selenite (up to 0.25 mM) was achieved within 40 h. SEM with energy dispersive X-ray and TEM analyses revealed the formation of nano size spherical selenium particles in and around the bacterial cells which were also supported by the confocal micrograph study. The UV-Vis diffuse reflectance spectra and XRD of selenium precipitates revealed that the selenium particles are in the nanometric range and crystalline in nature. These bacterial strains may be exploited further for bioremediation process of Se(IV) at relatively high salt concentrations and green synthesis of selenium nanoparticles.     

燃煤过程中微量元素砷和硒形态转化的热力学平衡模拟

砷和硒是煤中的易挥发有毒微量元素。由于砷和硒在燃煤烟气中的浓度极低以及实验条件的限制 ,目前化学热力学平衡分析已成为预报烟气中砷和硒等有毒元素形态分布的主要理论分析方法。本文综述了热力学平衡分析方法应用于砷和硒在燃煤过程中形态转化和平衡分布等方面的研究进展。首先用于热力学平衡分析的是只含有砷或硒一种微量元素和煤中主量元素及氯元素的简单体系 ,并假设烟气中只有理想气体组成的气相和纯凝聚相的理想模型。然而是否考虑砷和硒与其他微量、主量或次量元素的相互作用 ,砷和硒所有可能存在的反应 ,以及在熔融相砷和硒与熔融物的结合会严重地影响模型的预报结果 ,因此 ,目前热力学平衡体系已发展成为含有包括砷和硒在内的多个微量元素和煤中所有主量、次量元素 ,以及包括熔融相在内的非理想多相复杂体系     

Trace elements, organochlorines, polycyclic aromatic hydrocarbons, dioxins, and furans in lesser scaup wintering on the Indiana Harbor Canal

During the winter of 1993-94, male lesser scaup (Aythya affinis) were collected on the heavily polluted Indiana Harbor Canal (IHC), East Chicago, IN, USA, and examined for tissue contaminant levels. Lesser scaup collected on the IHC had higher concentrations of cadmium (Cd), mercury (Hg), selenium (Se), polychlorinated biphenyls (PCBs), selected organchlorine pesticides, polychlorinated dibenzodioxins, polychlorinated dibenzofurans, polycyclic aromatic hydrocarbons, and aliphatic hydrocarbons than reference birds. Of the scaup collected on the IHC, 44% had Cd concentrations in the liver considered above background for freshwater waterfowl (>3 microg/g dry wt.), 50% had Se concentrations in the liver above a level possibly harmful to the health of young and adult birds (>33 microg/g dry wt.), and 88% of the scaup carcasses exceeded the PCB human consumption guidelines for edible poultry in the USA (>3.0 microg/g lipid wt.). The ratio of pristane:n-heptadecane concentrations in 47% of lesser scaup collected on IHC was elevated above 1.0, which is indicative of chronic exposure to petroleum hydrocarbons.     

Spatial patterns in wet and dry deposition of atmospheric mercury and trace elements in central Illinois,USA

An intensive 1-month atmospheric sampling campaign was conducted concurrently at eight monitoring sites in central Illinois, USA, from June 9 to July 3, 2011 to assess spatial patterns in wet and dry deposition of mercury and other trace elements. Summed wet deposition of mercury ranged from 3.1 to 5.4 μg/m² across sites for the total study period, while summed dry deposition of reactive mercury (gaseous oxidized mercury plus particulate bound mercury) ranged from 0.7 to 1.6 μg/m², with no statistically significant differences found spatially between northern and southern sites. Ratios of summed wet to summed dry mercury deposition across sites ranged from 2.2 to 4.9 indicating that wet deposition of mercury was dominant during the study period. Volume-weighted mean mercury concentrations in precipitation were found to be significantly higher at northern sites, while precipitation depth was significantly higher at southern sites. These results showed that substantial amounts of mercury deposition, especially wet deposition, occurred during the study period relative to typical annual wet deposition levels. Summed wet deposition of anthropogenic trace elements was much higher, compared to summed dry deposition, for sulfur, selenium, and copper, while at some sites summed dry deposition dominated summed wet deposition for lead and zinc. This study highlights that while wet deposition of Hg was dominant during this spring/summer-season study, Hg dry deposition also contributed an important fraction and should be considered for implementation in future Hg deposition monitoring studies.     

Magnetic properties of biogenic selenium nanomaterials

Environmental Science and Pollution Research - Bioreduction of selenium oxyanions to elemental selenium is ubiquitous; elucidating the properties of this biogenic elemental selenium (BioSe) is thus...     

Estimation of efficiency of processing soil samples for pesticide residues analysis

The efficiency of four sample processing methods was tested with eight different types of soils representing the major proportion of cultivated soils. The principle of sampling constant was applied for characterizing the efficiency of the procedures and testing the well-mixed status of the prepared soil. The test material was 14C-labeled atrazine that enabled keeping the random error of analyses 相似文献   

Estimation of Efficiency of Processing Soil Samples for Pesticide Residues Analysis

The efficiency of four sample processing methods was tested with eight different types of soils representing the major proportion of cultivated soils. The principle of sampling constant was applied for characterizing the efficiency of the procedures and testing the well-mixed status of the prepared soil. The test material was 14C-labeled atrazine that enabled keeping the random error of analyses ≤ about 1%. Adding water to the soil proved to be the most efficient and generally applicable procedure resulting in about 6% relative sample processing uncertainty for 20 g test portions. The expected error is inversely proportional to the mass of test portion. Smashing and manual mixing of soil resulted in about four times higher uncertainty than mixing with water. Grinding of soil is applicable for dry soils only, but the test procedure applied was not suitable for estimating a typical uncertainty of processing dry soil samples. Adding dry ice did not improve the efficiency of sample processing.     

The recovery of selenious acid aerosols on glass fiber filters

Previous workers have shown that selenium is only partially trapped on a filter during air sampling. In some cases, these losses have been attributed to volatilization of selenium dioxide. Our results demonstrate that selenium dioxide, in the presence of moist air, is completely recovered (apparently as selenious acid aerosols) and that the previous shortfalls must be due to other selenium species as yet unidentified. Selenious acid aerosols in our study were formed by volatilizing selenium dioxide (approximately 3 mg) into a stream of moist ambient air (relative humidity, greater than 50%), and trapped on glass fiber filters using a high-volume air sampler. Selenium(IV) was ultrasonically extracted from the filter with water and analyzed by atomic absorption spectrometry. Selenious acid aerosols were trapped on the filters with high efficiency (105 +/- 5 percent) using a 50 minute sampling period. With an extended sampling period (24 hours) the recovery was 103 +/- 6 percent.     

Macroinvertebrate community in relation to water quality and riparian land use in a substropical mountain stream,China

Exploring how water quality and land use shape the benthic macroinvertebrate community composition is of widespread interest in biodiversity conservation and environmental management. In this study, we investigated the structures of benthic macroinvertebrate assemblages and their environmental controls in terms of water quality and riparian land use in the Jinshui River, China. We carried out three campaigns including wet season (August 2009), dry season (November 2009), and normal season (April 2010) based on the hydrological regime in Jinshui basin. The result showed that macroinvertebrate assemblage variations were better explained by water quality factors than land use based on variance partitioning procedure. The land use of 2 km upstream from the sampling sites had explained more variation than that of the whole riparian zone in upstream catchment on macroinvertebrate community, and land use of 2 km upstream also had more interactions with water quality. Canonical correspondence analysis (CCA) indicated that the elements or nutrient of magnesium (Mn), selenium (Se), strontium (Sr), silicon (Si), dissolved inorganic nitrogen (DN), sulfur (S), total organic carbon (TOC), and total nitrogen (TN) in water exhibited a strong relationship with macroinvertebrate assemblages. However, the variance in water quality explained by land use was lower than that explained by water quality in rivers using redundancy analysis. Our study suggested that proximate factors (i.e., water quality) were more important to interpret the macroinvertebrate community compared to ultimate factors (i.e., land use) for macroinvertebrate assemblages in river system.