Synthesis, characterization and application of a novel chemical sand-fixing agent-poly(aspartic acid) and its composites

A novel sand-fixing agent-poly(aspartic acid) and its composites were synthesized to improve sand particles compressive strength and anti-wind erosion properties. The relationship between the concentration of sand-fixing agent and the sand-fixing properties was studied by three kinds of aging tests. Some composites were choose to improve the sand-fixing property and the composition of 40% xanthan gum and 60% ethyl cellulose were chosen to compare sand-fixing property with lignosulfonate. The results showed that the sand-fixing and water-retaining properties of xanthan gum and ethyl cellulose composites were better than that of lignosulfonate. The biodegradability experiment showed that the PASP and its composites were environment-friendly products and the field test showed that the PASP composites could improve wind erosion disturbance.     

改性锰砂滤料处理高铁锰煤矿矿井水

采用KMnO4溶液浸渍法制备了新型改性锰砂滤料,研究了滤料表面性能和过滤处理高铁锰矿井水的效果。结果表明,锰砂滤料除铁锰性能优于石英砂、陶粒以及瓷砂,采用KMnO4溶液浸渍能够提高锰砂滤料的过滤性能,最优的浸渍浓度为5%。5%KMnO4改性锰砂滤料过滤处理高铁锰矿井水的最佳工艺参数为：过滤周期24 h,反冲洗强度3.2 L/（s.m2）,反冲洗时间5 min;通过比表面积测试分析和SEM表征分析发现,KMnO4溶液浸渍能够提高锰砂滤料比表面积,并在锰砂滤料表面形成了氧化膜,从而提高除铁除锰效果,而且浸渍液浓度越高,这种作用越明显。     

Encapsulation of nonmetallic fractions recovered from printed circuit boards waste with thermoplastic

The present work includes a process for encapsulation by combining substantially simultaneously dry nonmetallic printed circuit boards (PCBs) powder and recycled high-density polyethylene (rHDPE) in an extruder to form a homogenous matrix. The extruded materials were then molded into standard tensile, flexural, and impact properties testing specimens. Nonmetallic PCB mainly consists of large amount of glass fiber–reinforced epoxy resin materials. Incorporation of 50 wt% nonmetallic PCB in rHDPE matrix had increased the flexural strength and modulus by 35% and 130%, respectively. Tensile strength reported to be constant without much improvement. However, the Young’s modulus has increased by 180%, with incorporation of 50 wt% nonmetallic PCB. The addition of 6 phr (parts per hundred) maleated polyethylene (MAPE) resulted in 2-fold increase in tensile and flexural strength. Regarding the leaching properties, Cu was identified as the metal that leached at the highest level from the raw nonmetallic PCB, at 59.09 mg/L. However, after the nonmetallic PCB was filled in rHDPE/PCB composites, the concentration of Cu was reduced far below the regulatory limit, to only 3 mg/L. Thermal properties of composites were studied, and it was found out that incorporation of nonmetallic PCB fillers in rHDPE resulted in low thermal conductivity, whereas mechanical strength of the composites showed maximum improvements at 220 °C. Overall, the encapsulation technique using nonmetallic PCB waste has formed a monolithic waste form that provides a barrier to the dispersion of wastes into the environment.

ImplicationsNonmetallic materials reclaimed from waste PCBs were used to analyze the chemical composition, and it was found that nonmetalllic PCBs mainly consist of glass fiber–reinforced epoxy resin materials. With such millions of glass fibers in nonmetallic PCBs, there are mass-excellent supporting bodies that enhance the mechanical properties of composites. In fact, utilization of nonmetallic PCB waste as filler in composites can dramatically restrain the solubility of heavy metals in leachate solution, thus making it safe to be used in practical products.     

Transport and deposition of functionalized CdTe nanoparticles in saturated porous media

Comprehensive understanding of the transport and deposition of engineered nanoparticles (NPs) in subsurface is required to assess their potential negative impact on the environment. We studied the deposition behavior of functionalized quantum dot (QD) NPs (CdTe) in different types of sands (Accusand, ultrapure quartz, and iron-coated sand) at various solution ionic strengths (IS). The observed transport behavior in ultrapure quartz and iron-coated sand was consistent with conventional colloid deposition theories. However, our results from the Accusand column showed that deposition was minimal at the lowest IS (1mM) and increased significantly as the IS increased. The effluent breakthrough occurred with a delay, followed by a rapid rise to the maximum normalized concentration of unity. Negligible deposition in the column packed with ultrapure quartz sand (100mM) and Accusand (1mM) rules out the effect of straining and suggests the importance of surface charge heterogeneity in QD deposition in Accusand at higher IS. Data analyses further show that only a small fraction of sand surface area contributed in QD deposition even at the highest IS (100mM) tested. The observed delay in breakthrough curves of QDs was attributed to the fast diffusive mass transfer rate of QDs from bulk solution to the sand surface and QD mass transfer on the solid phase. Scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) analysis were used to examine the morphology and elemental composition of sand grains. It was observed that there were regions on the sand covered with layers of clay particles. EDX spectra collected from these regions revealed that Si and Al were the major elements suggesting that the clay particles were kaolinite. Additional batch experiments using gold NPs and SEM analysis were performed and it was observed that the gold NPs were only deposited on clay particles originally on the Accusand surface. After removing the clays from the sand surface, we observed negligible QD deposition even at 100mM IS. We proposed that nanoscale charge heterogeneities on clay particles on Accusand surface played a key role in QD deposition. It was shown that the value of solution IS determined the extent to which the local heterogeneities participated in particle deposition.     

Reductive dechlorination of polychlorinated dibenzo-p-dioxins by zerovalent iron in subcritical water

A new method for reductive dechlorination of polychlorinated dibenzo-p-dioxins (PCDDs) and remediation of contaminated soils is described that uses zerovalent iron as the dechlorination agent and subcritical water as reaction medium and extractive solvent. It is found that the zerovalent iron can be applied for stepwise dechlorination of octachlorinated dibenzo-p-dioxin (OCDD) on various matrixes in subcritical water. By using iron powder as matrix higher chlorinated congeners were practically completely reduced to less than tetra-substituted homologues. A significant part of residual OCDD, when it was spiked in to soils, and formed less chlorinated congeners are extracted with water in the given conditions. The solubility of OCDD was increased by a 4–6 orders over its solubility at ambient conditions. The new method of contentious-flow extraction is described.     

Fly-ash-amended sand as filter media in bioretention cells to improve phosphorus removal.

This study identified material with high phosphorus sorption suitable for bioretention filter media. Materials examined were fly ash, two expanded shales, peat moss, limestone, and two common Oklahoma soils--Teller loam and Dougherty sand. The peat moss was a phosphorus source, while the two soils, limestone, and one expanded shale had only modest sorption capacity. One expanded shale and the fly ash had significant phosphorus sorption. Fly ash is unsuitable for use in a pure form, as a result of its low permeability, but phosphorus sorption on the sand was increased significantly with the incorporation of small amounts of fly ash. Column leaching experiments found that the sand with 2.5 and 5% fly ash and the better expanded shale had linear, non-equilibrium transport retardation factors of 272, 1618, and 185, with first-order rate coefficients of 0.153, 0.0752, and 0.113 hour(-1), respectively. Desorption experiments showed that the phosphorus sorption on the sand/fly ash mixture is largely nonreversible. Transport simulation assuming a 1-m-deep sand/fly ash treatment layer, with 5% of the watershed area, showed that the sand/fly ash filter media could effectively treat 1 mg/L influent for 12 years in a paved watershed and 34 years in a grassed watershed before exceeding Oklahoma's scenic rivers' phosphorus criterion of 0.037 mg/L. Significant phosphorus removal would continue for over 100 years.     

二氧化氯-接触催化氧化联合去除水中铁和锰

为了解决水体中铁锰季节性超标的问题,提出一种既能够减少化学试剂的使用又能有效去除铁锰的经济有效的方法。研究了单一方法(二氧化氯氧化法、接触催化氧化法)及两者联合对铁锰的去除效果,提出用二氧化氯氧化-锰砂过滤联合方法解决。研究表明,用ClO2氧化去除水中Fe2+的反应先发生、速率较快且效果较好,而与Mn2+反应则较慢并且不能完全转化为沉淀。单纯接触催化氧化法需要较长时间,过滤层才能达到稳定且较好的处理效果,培养过程中其除锰效果并不理想。两者联合时,利用过滤层的吸附作用去除部分铁锰,减少了氧化剂的使用。初期3个柱的除Mn2+效果都比较好,去除率均大于80%;然而采用石英砂或纤维束滤料的滤柱去除Mn2+的效果随时间变差,但采用锰砂的除锰效果在实验期间始终维持在较高水平。     

Adsorption and cosorption of cadmium and glyphosate on two soils with different characteristics

Glyphosate [N-(phosphonomethyl)glycine] (GPS; H3G) is a widely used pesticide throughout the world. It affects metal behaviors in soil-plant system due to its functional groups, which react with metal ions to form metal complexes. Adsorption and cosorption of cadmium and glyphosate on a Wushan soil (WS soil, Anthrosol) and a Zhuanhong soil (ZH soil, Udic Ferrisol) as affect by solution pH were studied by means of batch adsorption experiments. It indicated that the adsorption quantity of Cd or glyphosate was highly relevant to soil characteristics. The WS soil had higher adsorption capacity of Cd than the ZH soil, due to its high organic matter content and cation exchange capacity (CEC). In contrast, the adsorption quantity of glyphosate on the WS soil was less than that on the ZH soil, because the WS soil has lower iron and aluminum oxides content but higher pH than the ZH soil. The herbicide glyphosate affected Cd adsorption on the two soils when they coexisted in a same soil solution, which was attributed to a glyphosate-induced pH-decrease and the corresponding decline in negative surface charges of the soil. Beside that, glyphosate reacted with solution Cd to form the water-soluble complexes that had lower affinity to soil surface in comparison with Cd itself. On the other hand, the presence of Cd in the soil solution also affected the adsorption of glyphosate on the soils. The presence of Cd increased adsorption quantity of glyphosate on the WS and ZH soils, which was resulted from the decrease of equilibrium solution pH caused by Cd2+ exchange with H+ ions of soil surface. In addition to that, glyphosate adsorption possibly takes place on sites where Cd was previously adsorbed and acted as a bridge between the soil and glyphosate.     

Cationic surfactant as a sensitizer for the spectrophotometric determination of hydrogen sulphide in air and evaluation of a new absorbing medium containing triethanolamine-zinc acetate-sodium hydroxide

An extractive spectrophotometric method for the determination of trace amounts of hydrogen sulphide after fixing the gas in triethanolamine (TEA)-zinc acetate-sodium hydroxide solution is described. The method is based on the reaction of iodate with hydrogen sulphide in the presence of acid and excess chloride ion leading to the formation of ICl2- species which is used to iodinate 2',7'-dichlorofluorescein to form 2',7'-dichloro-4',5'-diiodofluorescein. The iodinated product formed is extracted into an organic solvent and sensitized by equilibrating with a cationic surfactant, cetrimide, in the presence of acetate buffer (pH 5.9 +/- 0.1). The colour system obeys Beer's law over the range 0-1 microg of hydrogen sulphide and the relative standard deviation is 2.4% for 10 determinations at 0.75 microg of hydrogen sulphide. The effect of interfering gases on the determination is discussed. The proposed absorbing solution has been evaluated using a hydrogen sulphide permeation device. This absorbing solution has an absorption efficiency of > 93% at a flow rate of 1.5 litre min(-1) for a sampling period of 2 h. The fixed H2S is stable for 40 days. The method has been applied to determine residual H2S levels in a laboratory fume hood and in the vicinity of sewage pumping station. The method can be used to determine as little as 0.05 microg of hydrogen sulphide.     

NaCl在Zn(Ⅱ)-NaOH-H_2O体系中溶解度的测定及去除

等温溶解平衡法测定了283.2～323.2 K温度范围内NaCl在Zn(Ⅱ)-NaOH-H2O体系(cZn(Ⅱ)=0.6 mol/L、cNaOH=5.00mol/L)及NaOH-H2O体系(cNaOH=5.00 mol/L)中的溶解度。与NaOH-H2O、纯水体系相比,相同温度下NaCl在Zn(Ⅱ)-NaOH-H2O体系中溶解度最小。运用正交实验法对Zn(Ⅱ)-NaOH-H2O体系中NaCl的溶解度进行因素分析。结果表明,较高的cNaOH和cZn(Ⅱ)是造成NaCl溶解度急剧降低的主要原因,提高温度虽然对NaCl的溶解有促进作用但影响较小。最后,通过加热浓缩方式提高溶液NaOH和Zn的浓度,促使NaCl因溶解度骤降而结晶析出,首次实现了碱锌溶液中高浓度Cl-的大量去除。实验结果具有重要的工程应用价值。     

A study on the Cr(VI) removal from aqueous solutions by steel wool

The reduction of Cr(VI) by steel wool and the precipitation of reduced chromium by CaCO(3) powder and NaOH solution were investigated in continuous and batch systems, respectively. The effects of acid and initial Cr(VI) concentrations, volumetric rate and temperature of solution on Cr(VI) reduction were studied. The results showed that the reduction of Cr(VI), to a large extent, depended on, and increased with, acid concentration. The Cr(III) and iron ions in the reduced solution were completely precipitated by using NaOH solution at appropriate alkaline conditions. It was concluded that CaCO(3) powder could be used as a cheap precipitant for Cr(III) ions. But the iron ions in the reduced solution could not be fully removed by using this precipitant.     

日光下黄砂负载TiO2降解邻氯苯酚水溶液

研究了以黄砂为载体,ＴｉＯ２为催化剂,以太阳光为光源对邻氯苯酚水溶液进行光催化降解的可行性。结果表明,锐钛型ＴｉＯ２邓邻氯苯酚有显著的光催化降解作用;ＴｉＯ２的催化活性在焙烧温度３００℃时最高。     

Matrix-immobilized organoclay for the sorption of polycyclic aromatic hydrocarbons and pentachlorophenol from groundwater

Sorbent materials consisting of organoclay immobilized onto the surface of a solid support were evaluated for use in pentachlorophenol (PCP) and polycyclic aromatic hydrocarbon (PAH) remediation of groundwater at a creosote-contaminated Superfund site. Cetylpyridinium-exchanged low pH montmorillonite clay (CP-LPHM) was bonded to either sand (CP-LPHM/sand) or granular activated carbon (GAC) (CP-LPHM/GAC) using the free acid form of carboxymethylcellulose as an adhesive. Effluent from an oil-water separator was eluted through equal bed volumes of composite (4 g 3:2 CP-LPHM/GAC or 13 g CP-LPHM/sand), affinity-extracted, and quantitatively analyzed by GC/MS. PCP, naphthalene, fluorene, phenanthrene, pyrene, and total PAHs were initially reduced by both CP-LPHM/GAC (> or =99%, 61%, 99%, > or =99%, 97%, and 94%, respectively) and CP-LPHM/sand (90%, 70%, 94%, 95%, 93%, and 86%, respectively). Complete breakthrough of naphthalene occurred after approximately 15 h of elution through 3:2 CP-LPHM/GAC and 22 h through CP-LPHM/sand. PCP showed complete breakthrough following 18 h of elution through 3:2 CP-LPHM/GAC and 26 h through CP-LPHM/sand. However, 50% breakthrough was not attained for higher molecular weight PAHs, as fluoranthene, pyrene, benzo[a]anthracene, and chrysene continued to be greatly reduced with both 3:2 CP-LPHM/GAC (98%, 95%, 94%, and 95%, respectively) and CP-LPHM/sand (75%, 73%, 76%, and 78%, respectively) after 48 h of continuous elution. Results confirm prior studies, indicating that these organoclay-containing composites have a high capacity for contaminants found in wood preserving waste. Further, results suggest that the inclusion of CP-LPHM may be useful as part of an effective strategy for groundwater remediation of high concentrations of PCP and PAHs, in particular high molecular weight and carcinogenic PAHs.     

浸渍-碱性微波法载磁活性炭粉对壬基酚的吸附

利用浸渍-碱性微波法制备载磁粉末活性炭,通过等温吸附实验和动力学吸附实验,研究对比了其与原料活性炭、浸渍载铁活性炭对壬基酚的吸附性能。采用氮气吸附仪、FTIR、XRD、国标(GB/T12496.19-1999)邻菲啰啉分光度法及VSM,分别对3种样品进行了物相结构、表面官能团、铁含量及磁性能的分析,并探讨了吸附机理。结果表明,浸渍-碱性微波法载磁活性炭的总孔容及孔隙率均有较大提高;其吸附等温线符合Freundich方程,吸附动力学过程符合准二级动力学方程与孔道内扩散模型,相关系数R2均大于0.900。原活性炭经一定浓度的铁盐溶液浸渍后,铁含量由2%提高到8%。在碱性、N2气氛条件下微波后,铁系物主要存在形式为零价铁和Fe3O4,制得的载磁活性炭饱和磁化强度为1.12 emu/g。     

TCE recovery mechanisms using micellar and alcohol solutions: phase diagrams and sand column experiments

Forty-one phase diagrams and fifteen sand column experiments were conducted to evaluate the efficiency of three types of washing solutions to recover trichloroethylene (TCE) at residual saturation and to identify the recovery mechanisms involved. This study demonstrates that: (1) an alcohol and a surfactant combination is more efficient than an alcohol used alone in water; (2) the prediction of the dominant recovery mechanism from the tie line slopes in phase diagram is accurate and can be reproduced in sand column experiments; and (3) TCE recovery efficiency in sand column experiments is generally well represented by the position of the miscibility curve in phase diagrams in the low concentration range. However, the miscibility curve alone is not sufficient to exactly predict the TCE recovery mechanisms involved. Tie line slopes and the critical tie line have to be taken into consideration to select the active matter as well as its concentration and to predict the dominant recovery mechanism in sand column experiments. The sand column experiments quantified the recovery efficiency of each solution and identified the proportion of the recovery mechanisms (mobilisation vs. solubilisation). Washing solutions with an active matter concentration above the critical tie line caused dominating mobilisation. Mobilisation was also dominant when the active matter of the washing solution partitioned into the organic phase and the active matter concentration was below the critical tie line. Solubilisation and emulsification were dominant for washing solutions containing active matter, which principally partitioned into the aqueous phase and an active matter concentration below the critical tie line.     

共存杂质对磷酸铵镁结晶法回收磷的影响研究

研究用磷酸铵镁（MAP）结晶法去除、回收废水中的磷,分析含磷废水中各类共存杂质对MAP法去除、回收磷的影响。结果表明,废水中无机钙离子的存在可提高磷的去除率,而大分子有机物杂质的存在会使磷的去除率显著降低,小分子有机物对磷的去除基本无影响。在反应体系中引入外来晶种烟煤、石英砂和铁屑可显著提高低浓度含磷废水磷的去除效率,其中娴煤作为晶种的效果最明显。     

氧化亚铁硫杆菌浸出废弃线路板中铜的研究

对废弃线路板中的铜进行了细菌浸出、只有硫酸亚铁环境下的浸出及酸浸出实验,研究了不同条件对比浸出效果,研究结果表明,细菌浸出比只有硫酸亚铁存在的浸出和酸浸要快得多。研究了在线路板粉末浓度12、24、40、60和120 g/L下浸出速率的变化,结果表明, 在考察范围内,浸出速度随着加入的废弃线路板粉末浓度的升高而降低,当线路板粉末的浓度＞60 g/L时,浸出速度维持在较低水平,选取24 g/L作为浸出的线路板粉末的浓度。分别在细菌培养0、24、48和72 h时加入线路板粉末24 g/L进行浸出实验,结果表明,细菌培养时间长,使得浸出过程进行得也更快。     

Adsorption/desorption properties of copper ions on the surface of iron-coated sand using BET and EDAX analyses

This study was conducted to develop a heating process for coating hydrated iron oxide on the sand surface to utilise the adsorbent properties of the coating and the filtration properties of the sand. BET and scanning electron microscope (SEM) analyses were used to investigate the surface properties of the coated layer. An energy dispersive X-ray (EDAX) technique of analysis was used for characterising metal adsorption sites on the iron-coated sand surface. The results indicated that the iron-coated sand had more micropores and higher specific surface area because of the attachment of iron oxide. Copper ions could penetrate into the micropores and mesopores of iron oxide on sand surface, and the regeneration of the iron-coated sand could be achieved by soaking with pH = 3.0 acid solution. Besides, the results of EDAX analysis showed that copper ions were chemisorbed on the surface of iron-coated sand. Results of the study developed an innovative technology for coating iron oxide on sand surface for the treatment of heavy metal in water.     

以河砂为填料的接触氧化法处理高铁锰地下水研究

分别选用河砂、锰砂、改性页岩3种滤料作为滤柱填料,采用接触氧化法去除地下水中的铁锰,通过对比实验选取最佳填料,并对最佳填料去除铁锰的影响因素进行了研究.实验结果表明,3种滤料成熟期基本相同且对铁锰均有较好的去除效果,由于河砂具有广泛易得、成本低廉等优点,因此更适用于小城镇地区使用.对以河砂为填料的接触氧化法除铁除锰的深...     

The role of dissolved organic carbon in the mobility of Cd, Ni and Zn in sewage sludge-amended soils

A pot experiment was conducted to investigate the effect of application of naturally derived dissolved organic compounds (DOC) on the uptake of Cd, Ni and Zn by Lolium perenne L. from mixtures of soil and sewage sludge and on their extractability with CaCl2. DOC was applied at concentrations of 0, 285 and 470 mg l(-1) to a loamy sand (LS) and a sandy clay loam (SCL) soil mixed with sewage sludge at rates equivalent to 0, 10 and 50 t ha(-1). DOC applications significantly increased the extractability of metals and also their uptake by ryegrass, but the increase was greater where sludge was applied at 50 t ha(-1). It is suggested that DOC in soils significantly increased the availability of the metals to plants. This was especially the case in the LS soil, where DOC had less competition with surface sorption than in the SCL soil.