Environmental release and behavior of brominated flame retardants

Recently, environmental problems relating to brominated flame retardants (BFRs) have become a matter of greater concern than ever before, because of the recent marked increase in levels of polybrominated diphenyl ethers (PBDEs) found in human milk in Sweden and North America. The question that arises is whether environmental levels of PBDEs and other BFRs will continue to increase, causing toxic effects to humans. In an attempt to elucidate the current state of the science of BFRs, we review the consumer demand for BFRs (mainly in Japan), the characteristics of waste flame-retarded products, sources of emission, environmental behavior, routes of exposure of humans, temporal trends, and thermal-breakdown products of BFRs. At present, flame-retarded consumer products manufactured 10-20 years ago, when PBDEs were frequently used, are being dumped. The possible major sources of emission of BFRs into the environment are effluent and flue gases from BFR factories and other facilities processing BFRs. With respect to the environmental behavior of BFRs, the lower brominated compounds are, on the whole, predicted to be more volatile, more water soluble, and more bioaccumulative than the higher brominated compounds. The most probable route for exposure of the general human population to PBDEs, especially the lower brominated congeners, is through the diet. The release of BFRs from consumer products treated with these compounds could also lead to human exposure. Temporal trends in PBDE levels in the environment and in humans worldwide seem to vary considerably, depending on the regions or country, with possible reflections of the historic and current use of PBDEs. The environment and the general human population are also exposed to the thermal-breakdown products of PBDEs, such as polybrominated and mixed brominated/chlorinated dibenzo-p-dioxins and dibenzofurans (PBDDs/DFs and mixed PXDDs/DFs).     

Metabolism in the toxicokinetics and fate of brominated flame retardants--a review

Several classes of brominated flame retardants (BFRs), namely polybrominated biphenyls (PBBs), polybrominated diphenyl ethers (PBDEs), tetrabromobisphenol A (TBBPA), hexabromocyclododecane (HBCCD), bis(2,4,6-tribromophenoxy)ethane (BTBPE), and tris(2,3-dibromopropyl)phosphate (Tris), have been identified as environmental contaminants. PBDEs, TBBPA, and HBCCD are of particular concern due to increasing environmental concentrations and their ubiquitous presence in the tissues of humans and wildlife from Europe, Japan, and North America. Regardless, the toxicokinetics, in particular metabolism, of BFRs has received little attention. The present review summarizes the current state of knowledge of BFR metabolism, which is an important factor in determining the bioaccumulation, fate, toxicokinetics, and potential toxicity of BFRs in exposed organisms. Of the minimal metabolism research done, BFRs have been shown to be susceptible to several metabolic processes including oxidative debromination, reductive debromination, oxidative CYP enzyme-mediated biotransformation, and/or Phase II conjugation (glucuronidation and sulfation).However, substantially more research on metabolism is necessary to fully assess BFR fate, uptake and elimination kinetics, metabolic pathways, inter-species differences, the influence of congener structure, and the potential health risks to exposed organisms.     

Industry-sponsored research on the potential health and environmental effects of selected brominated flame retardants

Modern fire-fighting techniques, equipment and fire-resistant building design has lead to less destruction than in the previous centuries. However, a high fuel load in either a residence or a commercial building can overwhelm even the best firefighters or building construction, and factors affecting the fuel load have changed in recent decades. The fire load in a typical home has doubled over the last 50 years, furnishings typically include those made of petrochemicals that can behave as if containing built-in accelerant, and modern energy-efficient buildings are less able to disperse heat in the event of a fire. Flame retardant chemicals (FRs) are one means used to reduce the risk of fire. FRs are typically added or incorporated chemically into a polymer to slow or hinder the ignition or growth of a fire in low-to-moderate cost commodity polymers. One type of FR contains bromine atoms as the active moiety. The FR industry, either as individual companies or as consortia, has conducted a broad range of studies on the commercial deca-, octa- and pentabromodiphenyl oxide/ether, tetrabromobisphenol A and hexabromocyclododecane products. These five products have data in excess of the OECD Screening Informational Data Set (SIDS) and the U.S. High Production Volume (HPV) program, and sufficient data for the performance of formal EU risk assessments. The objective of this paper is to present the range of data developed by industry consortia and to provide sources for the information. We hope to facilitate further research by assembling references to industry consortia-sponsored research here.     

Determination of brominated flame retardants,with emphasis on polybrominated diphenyl ethers (PBDEs) in environmental and human samples--a review

Analytical methods for the determination of brominated flame retardants (BFRs), with a special emphasis on polybrominated diphenyl ethers (PBDEs) are reviewed. A number of procedures, which can be applied to the analysis of PBDEs and polybrominated biphenyls (PBBs), and in some cases for hexabromocyclododecane (HBCD), in environmental and human samples are described. Because several BFRs, such as tetrabromobisphenol-A (TBBP-A), BDE 209 and, to some extent, HBCD, may require a different approach, specific advice on their analysis is given separately when needed. Sample pretreatment, extraction, cleanup and fractionation, injection techniques, chromatographic separation, detection methods, quality control and method validation are discussed. For each topic, an overview is given of the current status of the field and recommendations for an appropriate analytical approach are presented.     

Toxic effects of brominated flame retardants in man and in wildlife

Brominated flame retardants (BFRs) are ubiquitous industrial chemicals, and many of them are produced in large volumes. Due to this fact, several BFRs are found in quantifiable levels in wildlife, as well as in humans. However, we are still lacking information on the effects of BFR in wildlife and, especially, in man. This review summarises the biological effects of polybrominated diphenyl ethers (PBDEs), tetrabromobisphenol A (TBBPA) and derivates, hexabromocyclododecane (HBCD) and polybrominated biphenyls (PBBs), however excluding other aspects such as environmental levels. These BFR groups were selected because of a large volume production (PBDEs, TBBPA and derivates), and availability of some toxicity data in spite of much lower production volumes (HBCD and PBBs). In addition, the increase in levels of PBDEs in human (breast milk) and wildlife samples during later time made it especially interesting to include this BFR group. PBDES: The commercial PBDE products predominantly consist of so-called penta-, octa- and decabromodiphenyl ether products. Each product consists of a rather narrow range of congeners and is named after the dominating congener as regards the bromination pattern. Generally, the PentaBDEs seem to cause adverse effects at the comparably lowest dose, whereas much higher doses were needed for effects of the DecaBDEs. The critical effects of PentaBDEs are those on neurobehavioural development (from 0.6 mg/kg body weight) and, at somewhat higher dose, thyroid hormone levels in rats and mice, of OctaBDEs on fetal toxicity/teratogenicity in rats and rabbits (from 2 mg/kg body weight), and of DecaBDEs on thyroid, liver and kidney morphology in adult animals (from 80 mg/kg body weight). Carcinogenicity studies, only performed for DecaBDEs, show some effects at very high levels, and IARC (1990) evaluates DecaBDEs not classifiable as to its carcinogenicity to humans. TBBPA: The toxicity of TBBPA in the experimental in vivo studies is suggested to be low. In most reported studies, only doses in g/kg body weight were effective, but at least one study suggested renal effects at around 250 mg/kg body weight. Although difficult to include and interpret in a quantitative risk assessment, the in vitro effects on immunological and thyroid hormones, as well as binding to erythrocytes should be noted. Before a solid standpoint could be reached on TBBPA toxicity additional studies must be performed. This statement is even more valid regarding the TBBPA derivates, where there is an almost complete lack of toxicity data. HBCD: Also in the case of HBCD, relevant toxicity studies are lacking. Based on the present animal studies, a critical effect is seen in the liver and on thyroid hormones (LOAEL 100 mg/kg body weight/day). However, in a recent short paper behavioural effects in mice pups were observed already at 0.9 mg/kg body weight, and behavioural effects may be a sensitive endpoint for HBCD, as well as for other BFRs. PBBS: Due to the Michigan accident in 1973-1974, many toxicity studies on PBBs are available. The critical experimental effects are those on reproduction and carcinogenicity, and a NOAEL of 0.15 mg/kg body weight/day could be suggested based on the cancer effects. In man no unequivocal effects have been observed, although in some studies neurological and musculoskeletal symptoms were suggested. Based on the carcinogenic effects in animals, a human TDI of 0.15 microg/kg body weight has been presented.To conclude, the toxicity data are almost entirely based on experimental models. There are differences among the BFR groups, as well as within these groups, both regarding type of toxic effect and at what dose it appears. As BFRs will continue to appear both in industrial applications and, even if the production has ceased, in our environment, there is a continued need for effects studies on BFRs.     

Determinants of brominated flame retardants in breast milk from a large scale Norwegian study

Brominated flame retardants (BFRs), particularly polybrominated diphenyl ethers (PBDEs), are widely present in human populations. In order to investigate human exposure pathways and associations with socioeconomic and lifestyle factors, 393 breast milk samples from mothers living in various regions throughout Norway were analyzed. Up to ten PBDE congeners were measured in all the samples, hexabromocyclododecane (HBCD) and BDE-209 in subsets of 310 and 46, respectively. The median concentrations of the sum of the seven most prominent PBDEs (BDE-28, 47, 99, 100, 153, 154 and 183), BDE-209 and HBCD were 2.1, 0.32 and 0.86 ng/g lipids, respectively. These concentrations are comparable to the levels generally observed in human populations in Europe. The frequency distributions were quite skewed with long tails towards higher concentrations. Maternal age, parity, education, having a cohabitant employed as electrician, and ventilation were factors significantly associated with some of the BFRs, although these factors only explained a small amount of the variability (R² 0.04–0.16). The mothers' diet was not found to influence the breast milk PBDE and HBCD levels. Our results show that sources other than the diet are important for the variability seen in breast milk BFR concentrations and that exposure from the indoor atmosphere should be emphasized in future studies.     

An overview of commercially used brominated flame retardants,their applications,their use patterns in different countries/regions and possible modes of release

Brominated flame retardants (BFRs) are used in a variety of consumer products and several of those are produced in large quantities. These compounds have been detected in environmental samples, which can be attributed to the anthropogenic uses of these compounds. Brominated flame retardants are produced via direct bromination of organic molecules or via addition of bromine to alkenes; hence, an overview of the production and usage of bromine over the past three decades is covered. Production, application, and environmental occurrence of high production brominated flame retardants including Tetrabromobisphenol A, polybrominated biphenyls, Penta-, Octa-, Deca-brominated diphenyl ether (oxide) formulation and hexabromocyclododecane are discussed.     

Several current-use, non-PBDE brominated flame retardants are highly bioaccumulative: evidence from field determined bioaccumulation factors

With the phaseout of brominated flame retardants (BFRs) polybrominated diphenyl ethers (PBDEs), some non-PBDE BFRs have prompted to be alternatives to the discontinued PBDEs. To assess the bioaccumulation potential of these chemicals, field bioaccumulation factors (BAFs) for several non-PBDE BFRs including hexabromocyclododecanes (HBCDs), 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE), pentabromotoluene (PBT), pentabromoethylbenzene (PBEB), and hexabromobenzene (HBB), were determined in the aquatic species from a natural pond in an electronic waste recycling site in South China. The log BAFs ranged 2.58-6.01, 3.24-5.58, 3.44-5.98, 2.85-5.98, 3.32-6.08, 2.04-4.77, 2.72-4.09 and 3.31-5.54 for α-HBCD, β-HBCD, γ-HBCD, ∑HBCDs, BTBPE, PBT, PBEB, and HBB, respectively. The log BAF values for HBCD isomers, BTBPE, and HBB were greater than 3.7 (corresponding BAF value 5000) in most of the investigated species, demonstrating their highly bioaccumulative properties. α-, β-, and γ-HBCDs, BTBPE, and HBB appeared comparable or had even greater BAFs compared to PBDE congeners with similar K(OW), suggesting that these BFRs may have a potentially high environmental risk. The BAFs for the given BFR compound were largely variable between species, due to the species-specific feeding ecology, trophic level, and metabolic capacity for these pollutants. Positive linear relationships between log BAF and log K(OW) (r2 = 0.59, p = 0.04), and molecular weight (r2 = 0.54, p = 0.06) of non-PBDE BFRs were observed in the species with low trophic level (Chinese mysterysnail), suggesting that the chemical's physicochemical properties also played key roles in the bioaccumulation processes.     

Playing with fire: the global threat presented by brominated flame retardants justifies urgent substitution

Few would now deny that the use of organobromine compounds to achieve fire retardancy in a diverse array of products and materials has led to contamination of the ecosphere on a widespread scale. This environmental prevalence and persistence of the brominated flame retardants, coupled with growing evidence of their potential for harm, present all too familiar parallels with the previous generation of persistent organic pollutants. Indeed, given the intrinsic properties of these brominated chemicals, the nature and extent of the current problem could well have been predicted in advance. The question is then whether we are prepared to let history repeat itself once more or to take precautionary action now to switch to more sustainable alternatives. The choice facing society is not between brominated flame retardants and unsafe products, but between fire safety leading to global contamination or fire safety achieved in less polluting ways. If we look beyond options for simple chemical-for-chemical substitution to alternative materials and designs, many of the solutions are already available. The remainder could undoubtedly be developed given the incentives to do so. However, a strong and clear policy approach, backed by legislative phase-outs within specified (and challenging) timeframes, will be necessary to break our current dependency on organobromine chemistry. This paper presents the justification for such an approach, reviews those initiatives already underway to replace brominated flame retardants and identifies pathways to the use of more sustainable products in the service of society.     

Maternal transfer of organochlorines and brominated flame retardants in blue tits (Cyanistes caeruleus)

Although eggs have frequently been used as a biomonitoring tool for contamination with organohalogenated pollutants (OHPs), few studies have investigated the processes of maternal transfer in birds. Here, maternal transfer of polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs) and polybrominated diphenyl ethers (PBDEs) was investigated through comparison of the concentrations and profiles between whole homogenised female blue tits (Cyanistes caeruleus) and their eggs. In addition, we examined if there was an effect of laying order on the concentrations of PCBs, OCPs and PBDEs. PCBs were the most abundant contaminants in female blue tits and their eggs, followed by OCPs and PBDEs. Among the OCPs, p,p'-DDE was the most dominant compound and accounted for more than 80% of the sum OCPs. Egg concentrations decreased significantly in relation to the laying order from 1623+/-148 ng/g lipid weight (lw) to 1040+/-47 ng/g lw for the sum PCBs, from 342+/-24 ng/g lw to 235+/-17 ng/g lw for the sum OCPs and from 49+/-5 ng/g lw to 27+/-5 ng/g lw for the sum PBDEs. When reviewing all studies investigating laying order effects of OHPs in birds, no clear patterns emerged, which may be due to differences in study species and methodology among studies. Despite the fact that there were laying order effects in blue tit clutches, the variance in concentrations of PCBs and PBDEs was larger among clutches than within clutches. Variance in OCP concentrations among clutches was similar to the variance within clutches. These results suggest that one randomly collected blue tit egg from a clutch is useful as biomonitoring tool for PCBs and PBDEs, while for OCPs it is recommended to consistently use the same egg from the laying sequence as a biomonitoring tool. Lipid-normalized concentrations of sum PCBs, sum OCPs and sum PBDEs in female blue tits after clutch completion were comparable to the concentrations in the first-laid eggs. The egg/female lipid concentration ratios for sum PCBs, sum OCPs and sum PBDEs decreased significantly from 1.0+/-0.09 to 0.7+/-0.003, 1.1+/-0.1 to 0.7+/-0.02 and 1.2+/-0.14 to 0.8+/-0.05, respectively, during the course of egg laying. The profiles of the females and eggs differed significantly for the PCBs, OCPs and PBDEs. There was a higher contribution of lower chlorinated PCB congeners (CB 28, CB 52, CB 95, CB 101 and CB 110), BDE 183, p,p'-DDT and other less persistent OCPs in the females compared to their eggs. Maternal transfer in blue tits seemed to be selective for the more bioaccumulative and persistent congeners/compounds.     

Levels of brominated flame retardants in blood in relation to levels in household air and dust

Levels of tri- to decabrominated diphenyl ethers (BDEs), 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE) and 1,2-bis(pentabromophenyl)ethane (DeBDethane) were determined in air, sedimentary dust and human plasma from five households in Sweden. The levels of the individual BDEs in the plasma samples were in the same order of magnitude as in other studies of the general population in Scandinavia, and varied between non-detectable (<0.41 ng g(-1) l.w.) to 17 ng g(-1) (l.w.). BDE#28 and #47 were present in all air samples, with mean values of 0.015 and 0.12 ng m(-3), respectively, except for one sample where the BDE#47 concentration was below the limit of detection (<0.17 ng m(-3)). BDE#209 was found in one of the five air samples at a concentration of 0.26 ng m(-3). DeBDethane was also detected in one sample, in which the BDE#209 level was below LOD (<0.021 ng m(-3)), at a level of 0.023 ng m(-3). All the target compounds were found in the sedimentary dust samples at levels from 0.51 to 1600 ng g(-1), the highest concentration representing BDE#209. The most abundant components in plasma, air and dust were BDE#47, #99 and #209. In the plasma samples BDE#207 and #206 were also present at similar concentrations as BDE#47. In the sedimentary dust samples, DeBDethane was also among the most abundant BFRs. A positive relationship was found for the sumBDE concentrations in dust and plasma, although the relationship was strongly dependent on one of the five observations. BFR levels in dust and air were not dependent on the house characteristics such as living area, floor material or number of electronic devices.     

Concentrations of brominated flame retardants in dust from United Kingdom cars, homes, and offices: causes of variability and implications for human exposure

Average concentrations of polybrominated diphenyl ethers (PBDEs) in dust in 30 homes, 18 offices, and 20 cars were 260,000, 31,000, and 340,000 ng SigmaPBDEs g(-1) respectively. Concentrations of BDEs 47, 99, 100, and 154 in cars exceeded significantly (p<0.05) those in homes and offices. Average concentrations of 1,2-bis(2,4,6-tribromophenoxy)ethane (TBE) and decabromodiphenyl ethane (DBDPE) in homes, offices, and cars respectively were lower at 120, 7.2, and 7.7 ng g(-1) (TBE) and 270, 170, and 400 ng g(-1) (DBDPE). BDE-209 concentrations in three samples are the highest to date at 2,600,000 (car), 2,200,000 (home), and 1,400,000 ng g(-1) (home). UK toddlers daily consuming 200 mg dust contaminated at the 95th percentile concentration, ingest 180 ng (Sigma)tri-hexa-BDEs and 310 microg BDE-209 day(-1). For TBE, exposure was lower than for PBDEs and hexabromocyclododecanes (HBCDs), while that for DBDPE was similar in magnitude to (Sigma)tri-hexa-BDEs, but less than for BDE-209 and HBCDs. BDE-209 concentrations recorded in ten samples taken at monthly intervals in one room varied 400-fold, implying caution when using single measurements of dust contamination for exposure assessment. Significant negative correlation was observed in one room between concentrations of BDE-47, 99, and 153 and dust loading (g dust m(-2) floor), suggesting "dilution" occurs at higher dust loadings.     

Chlorinated paraffins: a review of analysis and environmental occurrence

Chlorinated paraffins (CPs), as technical mixtures of polychlorinated alkanes (PCAs), are ubiquitous in the environment. CPs tend to behave in a similar way to persistent organic pollutants (POPs), leading several countries to impose regulations on the use of CPs. In this article, we review the literature on the properties of CPs, the current analytical tools available to determine CPs in various types of environmental matrices, and concentrations found in the environment. In particular, concentrations of CPs in environmental compartments including air, water, sediments, biota, human food products and human tissues are summarized. Priorities for future research are: improvements in analytical methodologies (reducing the complexity of the analysis, producing reference materials and performing interlaboratory studies); determining background levels of chlorinated paraffins in the environment and human populations (this question should be answered using quality assured analytical tools allowing the intercomparison of data); and investigating the sources of CPs to the environment and to humans.     

Polybrominated diphenyl ether flame retardants in the U.S. marine environment: A review

Polybrominated diphenyl ethers (PBDEs) are used as flame retardants in polymeric materials such as furnishing foam, rigid plastics and textiles. The U.S. has historically led the world production of these man-made chemicals and was responsible for about 50% of the total global demand in 2001. Paradoxically, scientific studies addressing sources, behavior and fate of PBDEs in the U.S. environment are limited when compared to those in Europe. This paper reviews the distribution of PBDEs in marine and estuarine matrices of the three U.S. coasts (Atlantic, Pacific and Gulf of Mexico) and Alaska. PBDEs are ubiquitous in all compartments including water, sediment and biota. Contamination is higher in urbanized regions such as the coast of California. In numerous cases, concentrations of PBDEs in U.S. marine matrices are among the highest in the world. Higher PBDE levels in the U.S. marine environment reflect that over 90% of the Penta-BDE global production has been utilized in the United States. BDEs 47, 99 and 100 typically dominate the composition of PBDEs in most samples and exhibit high concentrations in several matrices. BDEs 17, 28, 33, 49, 153, 154 and 155 are also of concern since they are known to be present in a minor proportion in the Penta-BDE products. BDEs 206, 207, 208 and 209 which occur in Deca-BDE products do not appear to accumulate in most marine organisms although they may be debrominated into more toxic congeners. There is still no regulation addressing PBDEs contamination in the U.S. aquatic environments. Thus, efforts to understand the cycling of PBDEs in the environment as well as toxic effects in organisms are needed to support the development of quality criteria. Some PBDE congeners fulfill the criteria to be recognized as persistent organic pollutants (POPs). The addition of PBDEs to the list of POPs established by the United Nations Stockholm Convention will be important in elevating environmental concerns regarding these chemicals to an appropriate level of awareness.     

Morphology,spatial distribution,and concentration of flame retardants in consumer products and environmental dusts using scanning electron microscopy and Raman micro-spectroscopy

We characterized flame retardant (FR) morphologies and spatial distributions in 7 consumer products and 7 environmental dusts to determine their implications for transfer mechanisms, human exposure, and the reproducibility of gas chromatography–mass spectrometry (GC–MS) dust measurements. We characterized individual particles using scanning electron microscopy/energy dispersive x-ray spectroscopy (SEM/EDS) and Raman micro-spectroscopy (RMS). Samples were screened for the presence of 3 FR constituents (bromine, phosphorous, non-salt chlorine) and 2 metal synergists (antimony and bismuth). Subsequent analyses of select samples by RMS enabled molecular identification of the FR compounds and matrix materials. The consumer products and dust samples possessed FR elemental weight percents of up to 36% and 31%, respectively. We identified 24 FR-containing particles in the dust samples and classified them into 9 types based on morphology and composition. We observed a broad range of morphologies for these FR-containing particles, suggesting FR transfer to dust via multiple mechanisms. We developed an equation to describe the heterogeneity of FR-containing particles in environmental dust samples. The number of individual FR-containing particles expected in a 1-mg dust sample with a FR concentration of 100 ppm ranged from < 1 to > 1000 particles. The presence of rare, high-concentration bromine particles was correlated with decabromodiphenyl ether concentrations obtained via GC–MS. When FRs are distributed heterogeneously in highly concentrated dust particles, human exposure to FRs may be characterized by high transient exposures interspersed by periods of low exposure, and GC–MS FR concentrations may exhibit large variability in replicate subsamples. Current limitations of this SEM/EDS technique include potential false negatives for volatile and chlorinated FRs and greater quantitation uncertainty for brominated FR in aluminum-rich matrices.     

Institutional isomorphism,environmental management accounting and environmental accountability: a review

Environment, Development and Sustainability - Environmental sustainability has received much attention in recent times by world leaders. This is largely due to the rate at which the natural...     

Variation, levels and profiles of organochlorines and brominated flame retardants in great tit (Parus major) eggs from different types of sampling locations in Flanders (Belgium)

Small-scale geographical variation in the occurrence of polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs) and polybrominated diphenyl ethers (PBDEs) was investigated using the eggs of a terrestrial residential songbird species, the great tit (Parus major). In addition, we investigated the influence of the type of sampling location on the presence of these pollutants. To achieve this, 10 different sampling locations in Flanders (Belgium) were classified into 3 groups based on the extent of urbanisation, industrialisation and agriculture. The higher variance among sampling locations for the levels and profiles of PCBs and OCPs, suggests that local contamination sources are more important for the PCBs and OCPs compared to the PBDEs. Levels of PCBs and PBDEs were significantly higher in the industrialised sampling locations compared to the other locations. Sum PCB and sum PBDE levels reached up to 6050 and 79 ng/g lipid weight, respectively. PCBs and PBDEs were highly positively correlated for all groups, suggesting similar exposure pathways and/or mechanisms of accumulation. Significantly higher levels of OCPs (sum OCPs up to 2683 ng/g lipid weight) were detected in the rural sampling locations situated in a residential area. This suggests that local historical usage of OCPs by inhabitants may be an important source of contamination in Flanders. Contamination profiles differed also among the sampling locations. The rural sampling locations had a higher contribution of lower brominated BDE congeners, whereas the industrialised locations had a higher contribution of higher brominated congeners. The differences in contamination profiles among the sampling locations are probably due to differences in exposure. In conclusion, our results showed that the characteristics of a sampling location influence both the levels and profiles of PCBs, OCPs and PBDEs.     

Brominated flame retardants and polychlorinated biphenyls in fish from the river Scheldt, Belgium

Levels of polybrominated diphenyl ethers (PBDEs), hexabromocyclododecanes (HBCDs), and polychlorinated biphenyls (PCBs) were measured in several fish species originating from the river Scheldt (Belgium). Five sampling locations were chosen in a highly industrialized area along the river, while two ponds in the vicinity of the river served as reference sites. The present study is a follow-up of a survey performed in 2000 which reported extremely high levels of PBDEs and HBCDs in eel (Anguilla anguilla) collected from the same region (Oudenaarde, Flanders). The sum of tri- to hepta-BDE congeners (2270+/-2260 ng/g lipid weight (lw), range 660-11500 ng/g lw) and total HBCDs (4500+/-3000 ng/g lw, range 390-12100 ng/g lw) were one order of magnitude higher than levels usually reported from freshwater systems, indicating the presence of point sources. In most samples, levels of total HBCDs were higher than those of PBDEs, probably due to the high density of factories using HBCD as an additive brominated flame retardant (BFR). The high values of HBCDs were confirmed by both gas- and liquid-chromatography-mass spectrometry. Although BFR levels were between the highest ever reported in freshwater ecosystems, PCBs could be detected at even higher concentrations (16000+/-14300 ng/g lw, range 3900-66600 ng/g lw), being among the highest levels recorded in Belgium. The inter-sampling site variation of PBDEs, HBCDs and PCBs was comparable. All locations presented similar PBDE congener profiles, with BDE 47 being the dominant congener, followed by BDE 100, BDE 99 and BDE 49, probably originating from the former use of the penta-BDE technical mixture. In order to estimate the impact of these point sources on human exposure, we further focussed on eels which showed a considerable decrease in the PBDE and HBCD levels between 2000 and 2006. Due to the wide span in concentrations between the different sampling locations, a variable contribution to the total human exposure through local eel consumption was estimated. The calculated daily intake ranged from 3 ng to 330 ng PBDEs/day for normal eel consumers, but was as high as 9800 ng PBDEs/day for anglers, which may be considered at risk.     

Evaluation of in vitro vs. in vivo methods for assessment of dermal absorption of organic flame retardants: A review

There is a growing interest to study human dermal exposure to a large number of chemicals, whether in the indoor or outdoor environment. Such studies are essential to predict the systemic exposure to xenobiotic chemicals for risk assessment purposes and to comply with various regulatory guidelines. However, very little is currently known about human dermal exposure to persistent organic pollutants. While recent pharmacokinetic studies have highlighted the importance of dermal contact as a pathway of human exposure to brominated flame retardants, risk assessment studies had to apply assumed values for percutaneous penetration of various flame retardants (FRs) due to complete absence of specific experimental data on their human dermal bioavailability. Therefore, this article discusses the current state-of-knowledge on the significance of dermal contact as a pathway of human exposure to FRs. The available literature on in vivo and in vitro methods for assessment of dermal absorption of FRs in human and laboratory animals is critically reviewed. Finally, a novel approach for studying human dermal absorption of FRs using in vitro three-dimensional (3D) human skin equivalent models is presented and the challenges facing future dermal absorption studies on FRs are highlighted.