有色金属行业含砷废弃物处置技术的研究进展

介绍了有色金属行业中含砷废弃物的两种处理技术——资源化和稳定化-固化的研究进展。从含砷的烟灰、废水及废渣3个方向对资源化处理技术的研究进展进行了介绍,含砷废弃物经资源化处理后可得到As2O3和砷酸盐产品,但砷产品品种有限,应开发新的资源化途径和砷产品。此外,综述了含砷废弃物的稳定化-固化处置技术的研究进展,指出铁盐稳定化优于钙盐稳定化,特别是臭葱石形式的沉淀具有稳定性高、堆存时间长和无需再固化的优点;对比了包胶固化、火法固化及熔融固化3种固化技术的特点,其中水泥包胶固化法的成熟度较高,但仍有改进空间。     

电镀污泥处理技术的研究进展

电镀污泥中含有大量的铬、镉、镍、锌等重金属，是一种典型的危险废物。综述了近年来国内外对电镀污泥处理技术的研究进展，包括固化／稳定化技术、热化学处理技术、有价金属回收技术和材料化技术等。对主要处理技术的应用前景进行了分析，认为热化学处理技术将成为未来电镀污泥处理领域内的一个重要研究方向。     

铬渣解毒处理处置技术综述

简要介绍了国内外铬盐生产现状和铬渣堆存现状,对铬渣解毒处理处置技术的五大类方法进行了评述,着重对铬渣干法解毒处理处置技术进行了研究。分析了各方法的优缺点和存在的主要问题,提出了铬渣治理要求及今后的发展方向。     

铬渣的无害化处理和综合利用

铬渣产量大、毒性剧烈,是严重污染生态环境和危害人类健康的危险废物.介绍了铬渣各种无害化处理方法的解毒机理、工艺过程和应用实践,阐述了对铬渣进行综合利用的途径,并就铬渣的防治前景提出了建议.     

铬渣水泥固化体稳定性研究

采用水泥固化的方法对铬渣进行处理。在水泥与铬渣、砂、水、硅酸钠的质量比为1：0．6：0．45：0．15：0．1时固化效果较好。固化体经28d的养护后,表面Cr^6 的浸出率为10^-5数量级,即使破碎至5mm以下的粒度,其Cr^6 的浸出质量浓度仍在国家标准以下。模拟酸溶试验和固化体抗压强度测试结果表明,固化体用于填埋是长期安全的。     

国内城市生活垃圾焚烧飞灰研究现状及进展

随着我国经济快速发展及城市化水平提升,城市生活垃圾产量越来越大,焚烧逐渐成为城市生活垃圾处理的主要方式.但焚烧会产生大量的垃圾焚烧飞灰(以下简称飞灰),飞灰属于危险废物.论述了飞灰的来源、成分、特性及危害,介绍了飞灰的处理处置技术:水泥固化技术、化学药剂稳定化技术、熔融固化技术、水热稳定化技术和水泥窑协同处理技术,并分...     

改性β-半水磷石膏固化含铅淤泥的性能及机理

采用改性β-半水磷石膏(MPG)(组成(w):50％ β-半水磷石膏、23％矿渣、15％磷渣、10％熟料和2％生石灰)对含铅淤泥进行固化稳定化.实验结果表明:MPG固化材料对含铅淤泥固化效果显著,养护28 d后MPG固化体的无侧限抗压强度比水泥固化体提高了73.59％,pH降低了18.24％;MPG固化体的含水率比未固...     

用铬渣作水泥矿化剂

介绍了铬渣作水泥矿化剂的原理和生产控制条件,通过经济和环境效益分析证明,铬渣作水泥矿化剂确实是一种处理和利用铬渣的好方法。     

干式还原法处理铬渣的机理及应用

采用干式还原法处理铬渣。在多级还原焙烧炉中于高温条件下,将过量的煤粉和铬渣混合后与O₂反应,经冷却、擦磨、磁分离后可得到铁精砂和处理后铬渣。介绍了干式还原法处理铬渣的机理和工艺参数。以3种铬渣试样进行应用试验,经多级还原焙烧—磁分离后,铬渣中的Cr（Ⅵ）质量浓度为0.05~0.18 mg/L,低于HJ/T301—2007标准中的要求（0.50 mg/L）,可作为建材原料加以利用。磁分离得到的铁精砂产品中铁的质量分数大于50%,铁回收率大于70%。目前设计的多级还原焙烧炉单炉处理铬渣能力为150 kt/a,标煤消耗为35 kg/t,处理成本约为60元/t。     

铬渣的物相组成及其对铬渣解毒和综合利用的影响

本文系统地列举了铬渣的元素组成,物相组成和六价铬各种存在形式,讨论了含有六价铬的各组分还原解毒时发生的变化以及各种因素的影响,指出固溶体中的六价铬难以还原,是铬渣解毒和综合利用时必须解决的主要困难。评论了各种治理方案,认为做水泥混合材是综合利用铬渣的重要途径。     

Environmental impact of ferrochrome slag in road construction

Vargon Alloys in Western Sweden is one of the largest producers of ferrochrome slag in Europe. Ferrochrome slag is a by-product from the production of ferrochrome, an essential component in stainless steel. Extensive tests have been carried out on the physical properties of the ferrochrome slag from Vargon Alloys and it was found to be highly suitable as road construction material. The composition and leaching tests of the ferrochrome slag show that the chromium content is high, 1-3%, although leaching under normal conditions is very low. With the exception of potassium (K), which had a potential leaching capacity (availability test) of around 16%, the leaching of chromium, nickel, zinc and other elements was just a few per cent. However, all these tests were conducted in the laboratory. What happens out in the field, under the influence of acid rain and biological activity, and how does this compare with the laboratory results? To answer this question an investigation was carried out to study the environmental impact of ferrochrome slag in roads that were built in 1994. The investigation includes soil sampling (total content and leachable amounts of metals) and groundwater analysis (filtered and non-filtered samples). In addition, a new method involving the bio-uptake of chromium and other metals by the roots of the dandelion (Taraxacum officinale) was tested. The results show that there was a low migration of particles from the slag to the underlying soil and that the leaching into the groundwater was also low for all the elements analysed. However, there seemed to be a significant uptake of Cr by plants growing with their roots in the slag. An investigation of plant uptake was an important complement to laboratory leaching tests on alternative materials.     

利用铬渣制备重铬酸钠

研究了采用焙烧—硫酸酸化法利用铬渣制备重铬酸钠的工艺.通过L16(44)正交实验得出铬渣焙烧—浸出的最佳工艺条件为:焙烧温度1 000℃,m(碳酸钠)∶m(铬渣)=0.18,液固比4,焙烧时间8h.在此条件下Cr(Ⅵ)回收率为99.3％.硫酸酸化制备重铬酸钠的最佳工艺条件为:浸出液pH为6.6,酸化液pH为3.5,浓缩液中重铬酸钠质量分数为83.1％.此条件下制备的产品重铬酸钠结晶率为44.5％,纯度为99.5％,符合GB1611-92《工业重铬酸钠》的一等品质量标准.处理1t铬渣可制备重铬酸钠约120 kg,增加收入660元.     

铬渣资源化处理的零排放工艺

采用氧化—还原法对某钢厂的粗铬渣进行提纯回收,对各项工艺参数进行了优化,探讨了铬渣零排放处理工艺的可行性。实验结果表明：在氧化温度80 ℃、氧化时间1.5 h、双氧水加入量2.35 mL/g（以铬渣计）,还原时间15 min、还原pH 1.5、NaHSO₃加入量0.445 g/g（以铬渣计）,沉淀pH 8.0,煅烧温度1 050 ℃、煅烧时间1 h的条件下,所得废渣的w（Cr）为1.29%,回收铬绿产品的w（Cr₂O₃）为97.20%,铬回收率为94.40%;处理后废水的ρ（总铬）约为0.06 mg/L,低于GB 13456—2012《钢铁工业水污染物排放标准》中规定的1.50 mg/L,既可作为循环用水,也可排放;处理后废渣中含大量硅元素,可作为生产水泥发泡节能砖或砌块的原料;整个回收过程清洁无污染,零排放,且具备一定的盈利空间。     

Characteristics of steel slag under different cooling conditions

Four types of steel slags, a ladle slag, a BOF (basic oxygen furnace) slag and two different EAF (electric arc furnace) slags, were characterized and modified by semi-rapid cooling in crucibles and rapid cooling by water granulation. The aim of this work was to investigate the effect of different cooling conditions on the properties of glassy slags with respect to their leaching and volume stability. Optical microscopy, X-ray diffraction, scanning electron microscope and a standard test leaching (prEN 12457-2/3) have been used for the investigation. The results show that the disintegrated ladle slag was made volume stable by water granulation, which consisted of 98% glass. However EAF slag 1, EAF slag 2 and the BOF slag formed 17%, 1% and 1% glass, respectively. The leaching test showed that the glass-containing matrix did not prevent leaching of minor elements from the modified slags. The solubility of chromium, molybdenum and vanadium varied in the different modifications, probably due to their presence in different minerals and their different distributions.     

Reuse of residues arising from lead batteries recycle: a feasibility study

The performance of products arising from the stabilization/solidification of slags from lead batteries recycle into a Portland cement matrix has been evaluated not only in order to get a stabilized waste to be disposed of according to the current legislation, but also to obtain a recyclable material, with both economic and environmental benefits. Under this respect a detailed characterization of raw slags has been performed and different slag-cement samples have been prepared by varying the slag content. The parameters related to the cementation process have been evaluated and a series of tests on the final waste forms have been carried out, aimed at assessing both mechanical performance and leaching behaviour. In spite of the acceptable values for flexural, compressive and tensile strength, however, the high release of lead from the solidification products seems to be a limiting factor for a reusable material. While explanations of such phenomenon are given (high alkalinity of Portland cement; early "doping" of cementitious components by lead in the amorphous state), the main conclusion of the research work is that further efforts should be addressed to the adoption of a different or a modified incorporation matrix.     

固定化微生物技术在废水处理中的研究进展

介绍了固定化微生物的载体和制备方法，综述了固定化微生物技术近年来在废水处理中的应用现状，并提出今后的研究方向和发展前景。     

Leaching of mercury-containing cement monoliths aged for one year

A directive from the Swedish Government states that waste containing more than 1% of mercury shall be permanently deposited. The stabilization of mercury by conversion to a sparingly soluble compound like the sulphide is crucial to ensure long-term immobilization in a permanent storage. Immobilization by the solidification/stabilization (S/S) method and possible formation of HgS from mercury oxide or elemental mercury by reaction with a sulphur source (S or FeS) is investigated by a modified version of the NEN 7345 Dutch tank-leaching test. The diffusion of mercury during 11 months from 1-year-old mercury containing monoliths of Portland and slag cement is demonstrated. In a geologic repository under conditions representative of deep granitic bedrock (bicarbonate buffered to pH 8.6), a favourable monolith combination is slag cement with addition of the iron sulphide troilite. The apparent diffusion coefficient of mercury is estimated.     

对氨基酚生产废水处理的研究状况

介绍了近10年来对氨基酚生产废水处理方法的研究现状及3种主要处理方法－物化法、生物法、化学法,评述了各自的优缺点。