Fe-N co-doped coral-like hollow carbon shell toward boosting peroxymonosulfate activation for efficient degradation of tetracycline: Singlet oxygen-dominated non-radical pathway

Fe-N co-doped coral-like hollow carbon shell (Fe-N-CS) was synthesized via a simply impregnation-pyrolysis method. The Fe-N-CS showed an excellent ability for activating peroxymonosulfate (PMS), which could degrade about 93.74% tetracycline (20 mg/L) in 12 min. The Fe-N-CS/PMS system exhibited a good anti-interference capacity of various pH, inorganic anions, HA and different water qualities. More importantly, the Fe nanoparticles were anchored uniformly in the carbon layer, effectively limiting the metal leaching. The quenching tests and electron spin resonance (ESR) manifested that non-radical singlet oxygen (¹O₂) was the main reactive oxygen species (ROS) for TC degradation. The mechanism study showed that Fe nanoparticles, defect and graphite N played a key role in activating PMS to produce ROS. Moreover, three probable degradation pathways were proposed by using LC-MS measurements. Generally, this work had a new insight for the synthesis of heterogeneous Fe-N-C catalysts in the advanced oxidation process based on PMS.     

Efficient degradation of tetracycline by singlet oxygen-dominated peroxymonosulfate activation with magnetic nitrogen-doped porous carbon

Nonradical reaction driven by peroxymonosulfate (PMS) based advanced oxidation processes has drawn widespread attention in water treatment due to their inherent advantages, but the degradation behavior and mechanism of organic pollutants are still unclear. In this study, the performance, intermediates, mechanism and toxicity of tetracycline (TC) degradation were thoroughly examined in the constructed magnetic nitrogen-doped porous carbon/peroxymonosulfate (Co-N/C-PMS) system. The results showed that 85.4% of TC could be removed within 15 min when Co-N/C and PMS was simultaneously added and the degradation rate was enhanced by 3.4 and 14.7 folds compared with Co-N/C or PMS alone, respectively. Moreover, the performance of Co-N/C was superior to that of most previously reported catalysts. Many lines of evidence indicated that Co-N/C-PMS system was a singlet oxygen-dominated nonradical reaction, which was less interfered by pH and water components, and displayed high adaptability to actual water bodies. Subsequently, the degradation process was elaborated on the basis of three-dimensional excitation-emission matrix spectra and liquid chromatography-mass spectrometry. At last, the toxicity of treated TC was greatly reduced by using microalgae Coelastrella sp. as ecological indicator. This study provides a promising approach based on singlet oxygen-dominated nonradical reaction for eliminating TC in water treatment.     

A facial strategy to efficiently improve catalytic performance of CoFe2O4 to peroxymonosulfate

Cobalt iron spinel (CoFe₂O₄) has been considered as a good heterogeneous catalysis to peroxymonosulfate (PMS) in the degradation of persistent organic pollutants due to its magnetic properties and good chemical stability. However, its catalytic activity needs to be further improved. Here, a facial strategy, “in-situ substitution”, was adopted to modify CoFe₂O₄ to improve its catalytic performance just by suitably increasing the Co/Fe ratio in synthesis process. Compared with CoFe₂O₄, the newly synthesized Co_1.5Fe_1.5O₄, could not only significantly improve the degradation efficiency of phenol, from 50.69 to 93.6%, but also exhibited more effective mineralization ability and higher PMS utilization. The activation energy advantage for phenol degradation using Co_1.5Fe_1.5O₄ was only 44.2 kJ/mol, much lower than that with CoFe₂O₄ (127.3 kJ/mol). A series of related representations of CoFe₂O₄ and Co_1.5Fe_1.5O₄ were compared to explore the possible reasons for the outstanding catalytic activity of Co_1.5Fe_1.5O₄. Results showed that Co_1.5Fe_1.5O₄ as well represented spinel crystal as CoFe₂O₄ and the excess cobalt just partially replaced the position of iron without changing the original structure. Co_1.5Fe_1.5O₄ had smaller particle size (8.7 nm), larger specific surface area (126.3 m²/g), which was more favorable for exposure of active sites. Apart from the superior physical properties, more importantly, more reactive centers Co (Ⅱ) and surface hydroxyl compounds generated on Co_1.5Fe_1.5O₄, which might be the major reason. Furthermore, Co_1.5Fe_1.5O₄ behaved good paramagnetism, wide range of pH suitability and strong resistance to salt interference, making it a new prospect in environmental application.     

Efficient degradation of drug ibuprofen through catalytic activation of peroxymonosulfate by Fe3C embedded on carbon

Ibuprofen(IBU),a nonsteroidal anti-inflammatory drug,is becoming an important member of pharmaceuticals and personal care products(PPCPs)as emerging pollutants.To degrade IBU,magnetic Fe_3C nanoparticles embedded on N-doped carbon(Fe_3C/NC)were prepared as a catalyst by a sol–gel combustion method.As characterized,the Fe_3C/NC nanoparticles were composed of a NC nano-sheet and capsulated Fe_3C particles on the sheet.The Fe_3C/NC nanoparticles were confirmed an efficient catalyst for peroxymonosulfate(PMS)activation to generate sulfate radicals(SO_4~(·-)),single oxygen(~1O_2)and hydroxyl radicals(·OH)toward the degradation of IBU.The added IBU(10 mg/L)was almost completely removed in 30 min by using 0.1 g/L Fe_3C/NC and 2 g/L PMS.The catalyst was confirmed to have good ability and excellent reusability through leaching measurements and cycle experiments.A catalytic mechanism was proposed for the catalytic activation of PMS on Fe_3C/NC,which involves both Fe_3C reactive sites and N-doped carbon matrix as reactive sites in Fe_3C/NC.Moreover,the degradation pathway of IBU in the Fe_3C/NC-PMS system was proposed according to the detections of degradation intermediates.     

Efficient degradation of Rhodamine B by magnetically recoverable Fe3O4-modified ternary CoFeCu-layered double hydroxides via activating peroxymonosulfate

Environment-friendly nano-catalysts capable of activating peroxymonosulfate (PMS) have received increasing attention recently. Nevertheless, traditional nano-catalysts are generally well dispersed and difficult to be separated from reaction system, so it is particularly important to develop nano-catalysts with both good catalytic activity and excellent recycling efficiency. In this work, magnetically recoverable Fe₃O₄-modified ternary CoFeCu-layered double hydroxides (Fe₃O₄/CoFeCu-LDHs) was prepared by a simple co-precipitation method and initially applied to activate PMS for the degradation of Rhodamine B (RhB). X-ray diffraction (XRD), fourier transform infrared spectrometer (FT-IR), scanning electron microscope (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller method (BET), and vibrating sample magnetometer (VSM) were applied to characterize morphology, structure, specific surface area and magnetism. In addition, the effects of several key parameters were evaluated. The Fe₃O₄/CoFeCu-LDHs exhibited high catalytic activity, and RhB degradation efficiency could reach 100% within 20 min by adding 0.2 g/L of catalyst and 1 mmol/L of PMS into 50 mg/L of RhB solution under a wide pH condition (3.0-7.0). Notably, the Fe₃O₄/CoFeCu-LDHs showed good super-paramagnetism and excellent stability, which could be effectively and quickly recovered under magnetic condition, and the degradation efficiency after ten cycles could still maintain 98.95%. Both radicals quenching tests and electron spin resonance (ESR) identified both HO? and SO₄^?? were involved and SO₄^?? played a dominant role on the RhB degradation. Finally, the chemical states of the sample's surface elements were measured by X-ray photoelectron spectroscopy (XPS), and the possible activation mechanism in Fe₃O₄/CoFeCu-LDHs/PMS system was proposed according to comprehensive analysis.     

Peroxymonosulfate enhanced photoelectrocatalytic oxidation of organic contaminants and simultaneously cathodic recycling of silver

Degradation of organic contaminants with simultaneous recycling of Ag⁺ from silver-containing organic wastewater such as photographic effluents is desired. Although photoelectrocatalysis (PEC) technology is a good candidate for this type of wastewater, its reaction kinetics still needs to be improved. Herein, peroxymonosulfate (PMS) was employed to enhance the PEC kinetics for oxidation of phenol (PhOH) at the anode and reduction of Ag⁺ at the cathode. The degradation efficiency of phenol (PhOH, 0.1 mmol/L) was increased from 42.8% to 96.9% by adding 5 mmol/L PMS at a potential of 0.25 V. Meanwhile, the Ag (by wt%) deposited on the cathode was 28.1% (Ag₂O) in PEC process, while that of Ag (by wt%) was 69.7% (Ag⁰) by adding PMS. According to the electrochemistry analysis, PMS, as photoelectrons acceptor, enhances the separation efficiency of charges and the direct h⁺ oxidation of PhOH at the photoanode. Meantime, the increasing cathode potential avoided H₂ evolution and strongly alkaline at the surface of cathode, thus enabling the deposition of Ag⁺ in the form of metallic silver with the help of PMS. In addition, PMS combined with PEC process was effective in treating photographic effluents.     

Carbonate-induced enhancement of phenols degradation in CuS/peroxymonosulfate system: A clear correlation between this enhancement and electronic effects of phenols substituents

This study investigated the enhancement effects of dissolved carbonates on the peroxymonosulfate-based advanced oxidation process with CuS as a catalyst. It was found that the added CO₃²⁻ increased both the catalytic activity and the stability of the catalyst. Under optimized reaction conditions in the presence of CO₃²⁻, the degradation removal of 4-methylphenol (4-MP) within 2 min reached 100%, and this was maintained in consecutive multi-cycle experiments. The degradation rate constant of 4-MP was 2.159 min⁻¹, being 685% greater than that in the absence of CO₃²⁻ (0.315 min⁻¹). The comparison of dominated active species and 4-MP degradation pathways in both CO₃²⁻-free and CO₃²⁻-containing systems suggested that more CO₃•⁻/¹O₂ was produced in the case of CO₃²⁻deducing an electron transfer medium, which tending to react with electron-rich moieties. Meanwhile, Characterization by X-ray photoelectron spectroscopic and cyclic voltammetry measurement verified CO₃²⁻ enabled the effective reduction of Cu²⁺ to Cu⁺. By investigating the degradation of 11 phenolics with different substituents, the dependence of degradation kinetic rate constant of the phenolics on their chemical structures indicated that there was a good linear relationship between the Hammett constants σ_p of the aromatic phenolics and the logarithm of k in the CO₃²⁻-containing system. This work provides a new strategy for efficient removal of electron-rich moieties under the driving of carbonate being widely present in actual water bodies.     

Fe2+和零价铁活化过一硫酸盐降解酸性橙7

采用环境友好的Fe~(2+)和零价铁(ZVI)作活化剂,活化过一硫酸盐(PMS)来降解水中酸性橙7(AO7).结果表明,在Fe~(2+)-PMS体系中,AO7的降解效果不佳,但通过添加适量的络合剂,AO7的去除率会大幅提高.ZVI在PMS存在下被腐蚀,并能够缓慢、持续不断地释放Fe~(2+).ZVI-PMS体系可以在比较宽泛的pH范围(3～9)有效、快速地降解AO7,并且在酸性条件下降解速率较快.淬灭实验结果显示,硫酸根自由基(SO_4~(·-))对AO7的降解起主要作用.除了Cl~-和高浓度(50 mmol·L~(-1))的NO_3~-能够促进AO7的降解外,其他水中共存的阴离子对AO7在ZVI-PMS体系中的降解具有抑制作用,而腐殖酸(HA)则无明显影响.AO7在超纯水中的去除率高于其他实际水体,但反应90 min后,污水厂出水过滤水和胶体浓缩液中的AO7去除率也可高达98.6%和87.6%,说明ZVI-PMS可能可以有效地去除含有较高DOC含量的污水中的AO7.利用GC-MS检测到辐照后溶液中有3种中间产物,推测主要是通过AO7偶氮键断键后的中间产物进一步氧化形成.此外,TOC在一定程度上降低,说明部分AO7被矿化.     

Core activated sludge communities are influenced little by immigration: Case study of a membrane bioreactor plant

Microbial immigrants arriving with influent wastewater may influence activated sludge (AS) ecosystems. However, the extent to which immigration impacts AS communities is still debated. To explore the intensity of immigration impact, we used sequencing technology to track the raw wastewater and AS communities from a membrane bioreactor plant over a 12-month period. We first distinguished core populations from peripheral ones in both raw wastewater and AS based on their occurrence frequency and abundance. The results showed that core OTUs (≥ 80% occurrence frequency) made up a large fraction (> 90%) of total sequences, while peripheral OTUs composed the majority of all detected OTUs but merely occupied a few sequences. A significant difference in core communities between the influent and AS was found, as well as between the compositions of core and peripheral populations. Additionally, the persistent functional bacteria of AS, although not numerically dominant, accounted for 96.24% of the total sequences related to nutrient turnover, suggesting the presence of a small number of longstanding and core functional bacteria in the AS ecosystem. Importantly, 64% of the 5188 OTUs in AS, which accounted for 91.51% of the sequences, exhibited positive growth rates, which suggested that their apparent abundances were due to growth within the plant, not from immigration. Taken together, these results demonstrated that the impact of influent populations on core AS communities was limited. Overall, this work provides quantitative insights into the impact of immigration, which is expected to advance our understanding of the AS community assembly.     

Adsorption mechanisms of PFOA onto activated carbon anchored with quaternary ammonium/epoxide-forming compounds: A combination of experiment and model studies

When wood-based activated carbon was tailored with quaternary ammonium/epoxide (QAE) forming compounds (QAE-AC), this tailoring dramatically improved the carbon's effectiveness for removing perfluorooctanoic acid (PFOA) from groundwater. With favorable tailoring, QAE-AC removed PFOA from groundwater for 118,000 bed volumes before half-breakthrough in rapid small scale column tests, while the influent PFOA concentration was 200 ng/L. The tailoring involved pre-dosing QAE at an array of proportions onto this carbon, and then monitoring bed life for PFOA removal. When pre-dosing with 1 mL QAE, this PFOA bed life reached an interim peak, whereas bed life was less following 3 mL QAE pre-dosing, then PFOA bed life exhibited a steady rise for yet subsequently higher QAE pre-dosing levels. Large-scale atomistic modelling was used herein to provide new insight into the mechanism of PFOA removal by QAE-AC. Based on experimental results and modelling, the authors perceived that the QAE's epoxide functionalities cross-linked with phenolics that were present along the activated carbon's graphene edge sites, in a manner that created mesopores within macroporous regions or created micropores within mesopores regions. Also, the QAE could react with hydroxyls outside of these pore, including the hydroxyls of both graphene edge sites and other QAE molecules. This latter reaction formed new pore-like structures that were external to the activated carbon grains. Adsorption of PFOA could occur via either charge balance between negatively charged PFOA with positively charged QAE, or by van der Waals forces between PFOA's fluoro-carbon tail and the graphene or QAE carbon surfaces.     

Peroxymonosulfate activation by Fe-N-S co-doped tremella-like carbocatalyst for degradation of bisphenol A: Synergistic effect of pyridine N, Fe-Nx, thiophene S

Bisphenol A (BPA) has received increasing attention due to its long-term industrial application and persistence in environmental pollution. Iron-based carbon catalyst activation of peroxymonosulfate (PMS) shows a good prospect for effective elimination of recalcitrant contaminants in water. Herein, considering the problem about the leaching of iron ions and the optimization of heteroatoms doping, the iron, nitrogen and sulfur co-doped tremella-like carbon catalyst (Fe-NS@C) was rationally designed using very little iron, S-C₃N₄ and low-cost chitosan (CS) via the impregnation-calcination method. The as-prepared Fe-NS@C exhibited excellent performance for complete removal of BPA (20 mg/L) by activating PMS with the high kinetic constant (1.492 min⁻¹) in 15 min. Besides, the Fe-NS@C/PMS system not only possessed wide pH adaptation and high resistance to environmental interference, but also maintained an excellent degradation efficiency on different pollutants. Impressively, increased S-C₃N₄ doping amount modulated the contents of different N species in Fe-NS@C, and the catalytic activity of Fe-NS@C-1-x was visibly enhanced with increasing S-C₃N₄ contents, verifying pyridine N and Fe-N_x as main active sites in the system. Meanwhile, thiophene sulfur (C-S-C) as active sites played an auxiliary role. Furthermore, quenching experiment, EPR analysis and electrochemical test proved that surface-bound radicals (^·OH and SO₄^⋅−) and non-radical pathways worked in the BPA degradation (the former played a dominant role). Finally, possible BPA degradation route were proposed. This work provided a promising way to synthesize the novel Fe, N and S co-doping carbon catalyst for degrading organic pollutants with low metal leaching and high catalytic ability.     

Efficient photocatalysis of tetracycline hydrochloride (TC-HCl) from pharmaceutical wastewater using AgCl/ZnO/g-C3N4 composite under visible light: Process and mechanisms

AgCl/ZnO/g-C₃N₄, a visible light activated ternary composite catalyst, was prepared by combining calcination, hydrothermal reaction and in-situ deposition processes to treat/photocatalyse tetracycline hydrochloride (TC-HCl) from pharmaceutical wastewater under visible light. The morphological, structural, electrical, and optical features of the novel photocatalyst were characterized using scanning electron microscopy (SEM), UV-visible light absorption spectrum (UV–Vis DRS), X-ray diffractometer (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and transient photocurrent techniques. All analyses confirmed that the formation of heterojunctions between AgCl/ZnO and g-C₃N₄ significantly increase electron-hole transfer and separation compared to pure ZnO and g-C₃N₄. Thus, AgCl/ZnO/g-C₃N₄ could exhibit superior photocatalytic activity during TC-HCl assays (over 90% removal) under visible light irradiation. The composite could maintain its photocatalytic stability even after four consecutive reaction cycles. Hydrogen peroxide (H₂O₂) and superoxide radical (^·O₂) contributed more than holes (h⁺) and hydroxyl radicals (^·OH) to the degradation process as showed by trapping experiments. Liquid chromatograph-mass spectrometer (LC-MS) was used for the representation of the TC-HCl potential degradation pathway. The applicability and the treatment potential of AgCl/ZnO/g-C₃N₄ against actual pharmaceutical wastewater showed that the composite can achieve removal efficiencies of 81.7%, 71.4% and 69.0% for TC-HCl, chemical oxygen demand (COD) and total organic carbon (TOC) respectively. AgCl/ZnO/g-C₃N₄ can be a prospective key photocatalyst in the field of degradation of persistent, hardly-degradable pollutants, from industrial wastewater and not only.     

Responses of nitrification performance, triclosan resistome and diversity of microbes to continuous triclosan stress in activated sludge system

Triclosan(TCS) is commonly found in wastewater treatment plants,which often affects biological treatment processes.The responses of nitrification,antibiotic resistome and microbial community under different TCS concentrations in activated sludge system were evaluated in this study.The experiment was conducted in a sequencing batch reactor(SBR)for 240 days.Quantitative PCR results demonstrated that the abundance of ammonium oxidizing bacteria could be temporarily inhibited by 1 mg/L TCS and then ...     

Carbamazepine degradation by heterogeneous activation of peroxymonosulfate with lanthanum cobaltite perovskite: Performance, mechanism and toxicity

The widely used carbamazepine(CBZ) is one of the most persistent pharmaceuticals and suffers insufficient removal efficiency by conventional wastewater treatment.A synthesized Co-based perovskite(LaCoO₃) was used to activate peroxymonosulfate(PMS) in order to degrade CBZ.Results showed that LaCoO₃ exhibited an excellent performance in PMS activation and CBZ degradation at neutral pH,with low cobalt leaching.The results of FT-IR and XPS verified the high structurally and che...     

Comparison of mesophilic and thermophilic anaerobic digestions of thermal hydrolysis pretreated swine manure: Process performance, microbial communities and energy balance

Anaerobic digestion (AD) of swine manure (SM) commonly shows low biogas output and unsatisfactory economic performance. In this study, thermophilic AD (TAD, 50 ± 1 °C) was combined with thermal hydrolysis pretreatment (THP, 170 °C/10 bar), to investigate its potential for maximizing biogas yield, securing successful digestion and microbial diversity, as well as improving energy balance. Four lab-scale continuously stirred tank reactors were operated for 300 days and compared with each other, i.e., reactor 1 (raw SM fed in mesophilic AD: RSM-MAD), reactor 2 (THP-treated SM fed in MAD: TSM-MAD), reactor 3 (RSM-TAD), and reactor 4 (TSM-TAD). The results showed that THP was efficient to increase methane production of SM, TSM-TAD mode led to the highest methane yield (129.8 ± 40.5 mL-CH₄/g-VS/day) among the tests (p < 0.05). Although TAD was more likely to induce free ammonia (> 700 mg/L) or volatile fatty acids (> 6000 mg/L) accumulation compared with MAD in start-up phase, TSM-TAD treatment mode behaved a sustainable digestion process in a long-term operation. For TSM-TAD scenario, higher Shannon–Weaver (3.873) and lower Simpson index (0.061) indicated this mode ensured and enlarged the diversity of bacteria communities. Phylum Bathyarchaeota was dominant (59.3%−90.0%) in archaea community, followed by Euryarchaeota in the four reactors. RSM-MAD treatment mode achieved the highest energy output (4.65 GJ/day), TSM-TAD was less effective (−17.38 GJ/day) due to increased energy demands. Thus improving the energetic efficiency of THP units is recommended for the development of TSM-TAD treatment mode.     

活性污泥降解四溴双酚A的特性、途径及毒性评估

电子行业典型污染物溴代阻燃剂对环境的污染引起了广泛关注.本文以产量最大、应用最广的典型溴代阻燃剂四溴双酚A(Tetrabromobisphenol A,TBBPA)为研究对象,考察了活性污泥降解四溴双酚A的特性、影响因素、降解途径并进行毒性评估.结果显示:活性污泥能有效降解水体中的TBBPA;在初始接菌量OD_(600)=0.77,TBBPA浓度为2.50 mg·L~(-1),温度为40℃,pH值为6.0时,经6 h反应后降解率可达58.46%,脱溴率达43.80%;在自然水体中活性污泥对TBBPA的降解受到抑制,尤其在腐殖质含量较高时;自然光能促进TBBPA降解,紫外光则抑制其降解活性;利用LC-Q-TOF-MS/MS检测到3种中间产物,推测TBBPA可能通过以下两种路径降解:①TBBPA发生甲基化和脱溴反应,产生甲基化的二溴双酚A,随后发生羟基化反应生成5-[1-(3-溴-4-甲氧基-苯基)-1-甲基-乙基]-2-甲氧基-苯酚;②TBBPA发生羟基化反应生成5-[1-(3-溴-4,5-二羟基-苯基)-1-甲基-乙基]-苯-1,2,3-三醇,随后发生脱溴、羟基化和甲基化反应,生成5-[1-(3-羟基-4,5-二甲氧基-苯基)-1-甲基-乙基]-2-甲氧基-苯-1,3-二醇;最后,利用发光细菌对该降解过程进行毒性评价,结果表明,活性污泥降解TBBPA的过程中其毒性未被完全去除,仍存在一定的环境风险.     

Preparation of ultrahigh-surface-area sludge biopolymers-based carbon using alkali treatment for organic matters recovery coupled to catalytic pyrolysis

In this work, we employed waste activated sludge (WAS) as carbon source to prepare ultrahigh specific surface area (SSA) biopolymers-based carbons (BBCs) through alkali (KOH) treatment coupled to pyrolysis strategy. Before the pyrolysis process, the involvement of KOH made a great recovery of soluble biopolymers from WAS, resulting in highly-efficient catalytic pyrolysis. The Brunner-Emmett-Teller and pore volume of BBCs prepared at 800°C (BBC₈₀₀) reached the maximum at 2633.89 m²·g^?1 and 2.919 m³·g^?1, respectively. X-ray photoelectron spectroscopy suggested that aromatic carbon in the form of C=C was the dominant fraction of C element in BBCs. The N element in BBCs were composed of pyrrolic nitrogen and pyridinic nitrogen at 700°C, while a new graphitic nitrogen appeared over 800°C. As a refractory pollutant of wastewater treatment plants, tetracycline (TC) was selected to evaluate adsorption performance of BBCs. The adsorption behavior of BBCs towards TC was conformed to the pseudo-second-order kinetic and the Langmuir models, signifying that chemisorption of monolayers was dominant in TC adsorption. The adsorption capacity of BBC₈₀₀ reached the maximum at 877.19 mg·g^?1 for 90 min at 298 K. Thermodynamic analysis indicated that the adsorption process was endothermic and spontaneous. Hydrogen bonding and π-π stacking interaction were mainly responsible for TC adsorption, and interfacial diffusion was the main rate-control step in adsorption process. The presence of soluble microbial products (SMPs) enhanced TC removal. This work provided a novel strategy to prepare bio-carbon with ultrahigh SSA using WAS for highly-efficient removal of organic pollutants.     

Interactions of extracellular DNA with aromatized biochar and protection against degradation by DNase I

With increasing environmental application, biochar (BC) will inevitably interact with and impact environmental behaviors of widely distributed extracellular DNA (eDNA), which however still remains to be studied. Herein, the adsorption/desorption and the degradation by nucleases of eDNA on three aromatized BCs pyrolyzed at 700 °C were firstly investigated. The results show that the eDNA was irreversibly adsorbed by aromatized BCs and the pseudo-second-order and Freundlich models accurately described the adsorption process. Increasing solution ionic strength or decreasing pH below 5.0 significantly increased the eDNA adsorption on BCs. However, increasing pH from 5.0 to 10.0 faintly decreased eDNA adsorption. Electrostatic interaction, Ca ion bridge interaction, and π-π interaction between eDNA and BC could dominate the eDNA adsorption, while ligand exchange and hydrophobic interactions were minor contributors. The presence of BCs provided a certain protection to eDNA against degradation by DNase I. BC-bound eDNA could be partly degraded by nuclease, while BC-bound nuclease completely lost its degradability. These findings are of fundamental significance for the potential application of biochar in eDNA dissemination management and evaluating the environmental fate of eDNA.     

杀灭菊酯的微生物降解及酶促降解

测定了降解菌ＹＦ１１及其胞内酶对杀灭菊酯的降解特性,在纯培养系统中,菌量为ＯＤ４１５ｎｍ０．２０时,ＹＦ１１对大于３０ｍｇ／Ｌ的杀灭菊酯的降解呈零级动力学特征,浓度为３０￣１００ｍｇ／Ｌ时,降解速率为１．８７６－２．１２４ｍｇ／（Ｌ·ｈ）;浓度大于２００ｍｇ／Ｌ的杀灭菊酯对降解菌ＹＦ１１的降解产生抑制作用,降解速率与菌量近似成正比关系,１０ｍｇ／Ｌ杀灭菊酯的降解曲线呈一级动力学特征。从ＹＦ１１提取     

Enhanced photoelectrocatalytic decomplexation of Ni-EDTA and simultaneous recovery of metallic nickel via TiO2/Ni-Sb-SnO2 bifunctional photoanode and activated carbon fiber cathode

In order to enhance Ni-EDTA decomplexation and Ni recovery via photoelectrocatalytic (PEC) process, TiO₂/Ni-Sb-SnO₂ bifunctional electrode was fabricated as the photoanode and activated carbon fiber (ACF) was introduced as the cathode. At a cell voltage of 3.5 V and initial solution pH of 6.3, the TiO₂/Ni-Sb-SnO₂ bifunctional photoanode exhibited a synergetic effect on the decomplexation of Ni-EDTA with the pseudo-first-order rate constant of 0.01068 min⁻¹ with 180 min by using stainless steel (SS) cathode, which was 1.5 and 2.4 times higher than that of TiO₂ photoanode and Ni-Sb-SnO₂ anode, respectively. Moreover, both the efficiencies of Ni-EDTA decomplexation and Ni recovery were improved to 98% from 86% and 73% from 41% after replacing SS cathode with ACF cathode, respectively. Influencing factors on Ni-EDTA decomplexation and Ni recovery were investigated and the efficiencies were favored at acidic condition, higher cell voltage and lower initial Ni-EDTA concentration. Ni-EDTA was mainly decomposed via ·OH radicals which generated via the interaction of O₃, H₂O₂, and UV irradiation in the contrasted PEC system. Then, the liberated Ni²⁺ ions which liberated from Ni-EDTA decomplexation were eventually reduced to metallic Ni on the ACF cathode surface. Finally, the stability of the constructed PEC system on Ni-EDTA decomplexation and Ni recovery was exhibited.