Metabolic responses of indigenous bacteria in chicken faeces and maggots to multiple antibiotics via heavy water labeled single-cell Raman spectroscopy

The use of maggots derived from chicken faeces as fish diets might serve as a vehicle for the widespread of multiple antibiotic resistant bacteria(ARB) in the environment. Heavy water labeled single-cell Raman spectroscopy(D 2 O-Raman) was applied to detect the metabolic responses of indigenous bacteria in chicken faeces and maggots to different concentrations of combined colistin, kanamycin, and vancomycin. By incubating the samples with D 2 O and antibiotics, metabolically active bacterial cel...     

Impacts of cadmium addition on the alteration of microbial community and transport of antibiotic resistance genes in oxytetracycline contaminated soil

The large-scale development in livestock feed industry has increased the chances of antibiotics and heavy metals contamination in the soil. The fate of antibiotic resistance genes (ARGs) and microbial community in heavy metals and antibiotic contaminated soil is still unclear. In this study, we investigated the effect of cadmium (Cd) addition on the transport of ARGs, microbial community and human pathogenic bacteria in oxytetracycline (OTC) contaminated soil. Results showed that the addition of OTC significantly increased the abundance of ARGs and intI1 in the soil and lettuce tissues. The addition of Cd to OTC treated soil further increased the abundance and translocation of ARGs and intI1. Moreover, Cd promoted the transfer of potential human pathogenic bacteria (HPB) into lettuce tissues. Compared with O10 treatment, the addition of Cd decreased the concentration of OTC in soil and lettuce tissue, but slightly increased the fresh weight of lettuce tissues. Redundancy analysis indicated that bacterial community succession is a major factor in ARGs variation. Network analysis indicated that the main host bacteria of ARGs were mainly derived from Proteobacteria. Correlation analysis showed that intI1 was significantly correlated with tetG, tetC, sul1, sul2, ermX, and ermQ. Meanwhile, potential HPB (Clostridium, and Burkholderia) was significantly correlated with intI1 and eight ARGs (tetG, tetC, tetW, tetX, sul1, sul2, ermX, and ermQ.). The findings of this study suggest that the addition of heavy metals to agricultural fields must be considered in order to reduce the transfer of ARGs in the soil and crops.     

Exploring the abundance and influencing factors of antimicrobial resistance genes in manure plasmidome from swine farms

Plasmids play a critical role in the dissemination of antimicrobial resistance genes (ARGs), however, a systematical understanding of ARGs originated from plasmids in swine production is currently lacking. Herein, quantitative polymerase chain reaction was applied to determine the prevalence of ten ARGs and the class1 integron gene intI1 of plasmid source in swine manure from 44 farms in Sichuan, Hubei and Hebei provinces, China. All assayed ARGs were observed in plasmid DNA samples, and the average absolute abundance of aac(6’)-Ib-cr, bla_NDM, bla_CTX-M, optrA, ermB, floR, mcr-1, qnrS, tetM, sul1 and intI1 were 7.09, 2.90, 4.67, 6.62, 7.55, 7.14, 4.08, 4.85, 7.16, 7.11 and 8.07 of 10 log copies/gram, respectively. IntI1 showed a high correlation (r > 0.8, P < 0.01) with the abundance of aac(6’)-Ib-cr and sul1 in swine manure. Moreover, the farm scale (i.e., herd population) and geographical location were not found to be critical factors influencing the absolute abundance of ARGs of plasmid DNA in swine farms. However, the concentrations of florfenicol, Cu, Zn, Fe, total phosphorus (TP) and total potassium (TK) demonstrated a significant correlation with the abundance of several ARGs. Particularly, Cu and Zn had high correlations with optrA and bla_CTX-M, respectively. Our results demonstrated that antibiotics, heavy metals and environmental nutrients are likely jointly contributing to the long-term persistence of ARGs in swine production. This study provides insights into the abundance and influencing factors of ARGs from swine manure, which is of significance for assessing and reducing the public health risks in livestock production.     

Removal of antibiotic-resistant genes during drinking water treatment: A review

Once contaminate the drinking water source, antibiotic resistance genes (ARGs) will propagate in drinking water systems and pose a serious risk to human health. Therefore, the drinking water treatment processes (DWTPs) are critical to manage the risks posed by ARGs. This study summarizes the prevalence of ARGs in raw water sources and treated drinking water worldwide. In addition, the removal efficiency of ARGs and related mechanisms by different DWTPs are reviewed. Abiotic and biotic factors that affect ARGs elimination are also discussed. The data on presence of ARGs in drinking water help come to the conclusion that ARGs pollution is prevalent and deserves a high priority. Generally, DWTPs indeed achieve ARGs removal, but some biological treatment processes such as biological activated carbon filtration may promote antibiotic resistance due to the enrichment of ARGs in the biofilm. The finding that disinfection and membrane filtration are superior to other DWTPs adds weight to the advice that DWTPs should adopt multiple disinfection barriers, as well as keep sufficient chlorine residuals to inhibit re-growth of ARGs during subsequent distribution. Mechanistically, DWTPs obtain direct and inderect ARGs reduction through DNA damage and interception of host bacterias of ARGs. Thus, escaping of intracellular ARGs to extracellular environment, induced by DWTPs, should be advoided. This review provides the theoretical support for developping efficient reduction technologies of ARGs. Future study should focus on ARGs controlling in terms of transmissibility or persistence through DWTPs due to their biological related nature and ubiquitous presence of biofilm in the treatment unit.     

Removal of antibiotics from aqueous solution by using porous adsorbent templated from eco-friendly Pickering aqueous foams

The aqueous foam template without any solvent and only using the particles stabilizer has attracted much attention for preparation of the porous adsorbents. Herein, a novel porous adsorbent was fabricated via thermal-initiated polymerization of Pickering aqueous foams, which was stabilized by the natural sepiolite (Sep) and pine pollen, and utilized for the removal of antibiotic from aqueous solution. The stabilizing mechanism of Pickering aqueous foam of that the Sep was modified with the leaching substance from pine pollen and arranged orderly around the bubble to form a dense “shell” structure was revealed. The adsorbents possessed the hierarchical porous structure and excellent adsorption performance for antibiotic of chlorotetracycline hydrochloride (CTC) and tetracycline hydrochloride (TC). The equilibrium adsorption capacities of CTC and TC were achieved with 465.59 and 330.59 mg/g within 60 min at 25°C, respectively. The adsorption process obeyed Langmuir model and pseudo-second-order adsorption kinetic model. This work provided eco-friendly approach for fabricate porous adsorbents for wastewater treatment.     

Copper stimulates the incidence of antibiotic resistance, metal resistance and potential pathogens in the gut of black soldier fly larvae

The black soldier fly larvae (BSFL) have been successfully applied to treat various organic wastes. However, the impacts of heavy metals on antibiotic resistance in the BSFL guts are poorly understood. Here, we investigated the effect of copper (exposure concentrations of 0, 100 and 800 mg/kg) on the antibiotic and metal resistance profiles in BSFL guts. A total of 83 antibiotic resistance genes (ARGs), 18 mobile genetic elements (MGEs) and 6 metal resistance genes (MRGs) were observed in larval gut samples. Exposure to Cu remarkably reduced the diversity of ARGs and MGEs, but significantly enhanced the abundances of gut-associated ARGs and MRGs. The levels of MRGs copA, czcA and pbrT were dramatically strengthened after Cu exposure as compared with CK (increased by 2.8–13.5 times). Genera Enterococcus acted as the most predominant potential host of multiple ARG, MGE and MRG subtypes. Meanwhile, high exposure to Cu aggravated the enrichment of potential pathogens in BSFL guts, especially for Escherichia, Enterococcus and Salmonella species. The mantel test and procrustes analysis revealed that the gut microbial communities could be a key determinant for antibiotic and metal resistance. However, no significant positive links were observed between MGEs and ARGs or MRGs, possibly suggesting that MGEs did not play a crucial role in shaping the ARGs or MRGs in BSFL guts under the stress of Cu. These findings extend our understanding on the impact of heavy metals on the gut-associated antibiotic and metal resistome of BSFL.     

Temporal variation and sharing of antibiotic resistance genes between water and wild fish gut in a peri-urban river

Antibiotic resistance genes (ARGs) as emergence contaminations have spread widely in the water environment. Wild fish may be recipients and communicators of ARGs in the water environment, however, the distribution and transmission of ARGs in the wild fish and relevant water environment were rarely reported. Here, we have profiled ARGs and bacterial communities in wild freshwater fish and relevant water in a peri-urban river using high-throughput qPCR and 16S rRNA gene sequence. A total of 80 and 220 unique ARG subtypes were identified in fish and water samples. Fish and water both showed significant ARG seasonal variations (P < 0.05). The highest absolute abundance of ARGs in fish and water occurred in summer (1.32 × 10⁹ copies per g, on average) and autumn (9.04 × 10⁶ copies per mL), respectively. In addition, the bipartite network analysis showed that 9 ARGs and 1 mobile genetic element continuously shared in fish and water. Furthermore, bacteria shared in fish and water were found to significantly correlate with shard ARGs. The findings demonstrate that bacteria and ARGs in fish and water could interconnect and ARGs might transfer between fish and water using bacteria as a spreading medium.     

Short-term inhalation exposure evaluations of airborne antibiotic resistance genes in environments

Antibiotic resistance is a sword of Damocles that hangs over humans. In regards to airborne antibiotic resistance genes (AARGs), critical knowledge gaps still exist in the identification of hotspots and quantification of exposure levels in different environments. Here, we have studied the profiles of AARGs, mobile genetic elements (MGEs) and bacterial communities in various atmospheric environments by high throughput qPCR and 16S rRNA gene sequencing. We propose a new AARGs exposure dose calculation that uses short-term inhalation (STI). Swine farms and hospitals were high-risk areas where AARGs standardised abundance was more abundant than suburbs and urban areas. Additionally, resistance gene abundance in swine farm worker sputum was higher than that in healthy individuals in other environments. The correlation between AARGs with MGEs and bacteria was strong in suburbs but weak in livestock farms and hospitals. STI exposure analysis revealed that occupational intake of AARGs (via PM₁₀) in swine farms and hospitals were 110 and 29 times higher than in suburbs, were 1.5 × 10⁴, 5.6 × 10⁴ and 5.1 × 10² copies, i.e., 61.9%, 75.1% and 10.7% of the overall daily inhalation intake, respectively. Our study comprehensively compares environmental differences in AARGs to identify high-risk areas, and forwardly proposes the STI exposure dose of AARGs to guide risk assessment.     

Cross-boundary transport and source apportionment for PM2.5 in a typical industrial city in the Hebei Province, China: A modeling study

Cross-boundary transport of air pollution is a difficult issue in pollution control for the North China Plain. In this study, an industrial district (Shahe City) with a large glass manufacturing sector was investigated to clarify the relative contribution of fine particulate matter (PM_2.5) to the city's high levels of pollution. The Nest Air Quality Prediction Model System (NAQPMS), paired with Weather Research and Forecasting (WRF), was adopted and applied with a spatial resolution of 5 km. During the study period, the mean mass concentrations of PM_2.5, SO₂, and NO₂ were observed to be 132.0, 76.1, and 55.5 μg/m³, respectively. The model reproduced the variations in pollutant concentrations in Shahe at an acceptable level. The simulation of online source-tagging revealed that pollutants emitted within a 50-km radius of downtown Shahe contributed 63.4% of the city's total PM_2.5 concentration. This contribution increased to 73.9±21.2% when unfavorable meteorological conditions (high relative humidity, weak wind, and low planetary boundary layer height) were present; such conditions are more frequently associated with severe pollution (PM_2.5 ≥ 250 μg/m³). The contribution from Shahe was 52.3±21.6%. The source apportionment results showed that industry (47%), transportation (10%), power (17%), and residential (26%) sectors were the most important sources of PM_2.5 in Shahe. The glass factories (where chimney stack heights were normally < 70 m) in Shahe contributed 32.1% of the total PM_2.5 concentration in Shahe. With an increase in PM_2.5 concentration, the emissions from glass factories accumulated vertically and narrowed horizontally. At times when pollution levels were severe, the horizontally influenced area mainly covered Shahe. Furthermore, sensitivity tests indicated that reducing emissions by 20%, 40%, and 60% could lead to a decrease in the mass concentration of PM_2.5 of of 12.0%, 23.8%, and 35.5%, respectively.     

Impacts of meteorological parameters on the occurrence of air pollution episodes in the Sichuan basin

Episodes of fine-particulate matter(PM_2.5) pollution are a widespread and common occurrence in China, and have potentially serious implications for human health. Meteorological conditions play an important role in air quality and influence the formation of regional air pollution episodes. This study applied a new classification method and daily PM_2.5 concentration data to(a) evaluate different levels of air pollution in the Sichuan–Chongqing region between 2015 and 2017, an...     

Changes in air pollution during COVID-19 lockdown in Spain: A multi-city study

The COVID-19 pandemic has escalated into one of the largest crises of the 21st Century. The new SARS-CoV-2 coronavirus, responsible for COVID-19, has spread rapidly all around the world. The Spanish Government was forced to declare a nationwide lockdown in view of the rapidly spreading virus and high mortality rate in the nation. This study investigated the impact of short-term lockdown during the period from March 15th to April 12th 2020 on the atmospheric levels of CO, SO₂, PM₁₀, O₃, and NO₂ over 11 representative Spanish cities. The possible influence of several meteorological factors (temperature, precipitation, wind, sunlight hours, minimum and maximum pressure) on the pollutants' levels were also considered. The results obtained show that the 4-week lockdown had significant impact on reducing the atmospheric levels of NO₂ in all cities except for the small city of Santander as well as CO, SO₂, and PM₁₀ in some cities, but resulted in increase of O₃ level.     

A meta-analysis of heavy metals pollution in farmland and urban soils in China over the past 20 years

A total of 713 research papers about field monitor experiments of heavy metals in farmland and urban soils in China, published from 2000 to 2019, were obtained. A meta-analysis was conducted to evaluate the level of China's heavy metal pollution in soils, mainly focusing on eight heavy metals. It was found that the average concentrations of cadmium (Cd), lead (Pb), zinc (Zn), copper (Cu), mercury (Hg), chromium (Cr), nickel (Ni), and arsenic (As) in China were 0.19, 30.74, 85.86, 25.81, 0.074, 67.37, 27.77 and 8.89 mg/kg, respectively. Compared with the background value (0.097 mg/kg), the Cd content showed a twofold (0.19 mg/kg) rise in farmland soils and a threefold (0.29 mg/kg) rise in urban soils. The decreasing order of the mean I_geo was Cd (1.77) > Pb (0.62) > Zn (0.60) > Cu (0.58) > Hg (0.57) > Cr (0.54) > Ni (0.47) > As (0.28). Nearly 33.54% and 44.65% of sites in farmland and urban soils were polluted with Cd. The average concentrations of eight heavy metals were not sensitive change in recent two decades in farmland and urban soils. The average P_n values for urban (2.52) and farmland (2.15) soils showed that heavy metal pollution in urban soils was more serious than that in farmland, and the middle Yangtze River regions, where industrial activity dominates, were the most polluted. The meta-analysis comprehensively evaluated the current pollution situation of soil heavy metal, and provided important basis for soil management and environment prevention in China.     

Co-occurrence of genes for antibiotic resistance and arsenic biotransformation in paddy soils

Paddy soils are potential hotspots of combined contamination with arsenic (As) and antibiotics, which may induce co-selection of antibiotic resistance genes (ARGs) and As biotransformation genes (ABGs), resulting in dissemination of antimicrobial resistance and modification in As biogeochemical cycling. So far, little information is available for these co-selection processes and specific patterns between ABGs and ARGs in paddy soils. Here, the 16S rRNA amplicon sequencing and high-throughput quantitative PCR and network analysis were employed to investigate the dynamic response of ABGs and ARGs to As stress and manure application. The results showed that As stress increased the abundance of ARGs and mobile genetic elements (MGEs), resulting in dissemination risk of antimicrobial resistance. Manure amendment increased the abundance of ABGs, enhanced As mobilization and methylation in paddy soil, posing risk to food safety. The frequency of the co-occurrence between ABGs and ARGs, the host bacteria carrying both ARGs and ABGs were increased by As or manure treatment, and remarkably boosted in soils amended with both As and manure. Multidrug resistance genes were found to have the preference to be co-selected with ABGs, which was one of the dominant co-occurring ARGs in all treatments, and manure amendment increased the frequency of Macrolide-Lincosamide-Streptogramin B resistance (MLSB) to co-occur with ABGs. Bacillus and Clostridium of Firmicutes are the dominant host bacteria carrying both ABGs and ARGs in paddy soils. This study would extend our understanding on the co-selection between genes for antibiotics and metals, also unveil the hidden environmental effects of combined pollution.     

A survey on heavy metal concentrations in residential neighborhoods: The influence of secondary water supply systems

Water quality deterioration often occurs in secondary water supply systems (SWSSs), and increased heavy metal concentrations can be a serious problem. In this survey, twelve residential neighborhoods were selected to investigate the influence of SWSSs on the seasonal changes in heavy metal concentrations from input water to tank and tap water. The concentrations of nine evaluated heavy metals in all groups of water samples were found to be far below the specified standard levels in China. The concentrations of Fe, Mn, and Zn increased significantly from the input water samples to the tank and tap water samples in spring and summer (p < 0.05), especially for the water samples that had been stagnant for a long time. Negative correlations were found between most of the heavy metals and residual chlorine (Fe, Cu, Zn, and As, r = -0.186 to -0.519, p < 0.05). In particular, a high negative correlation was observed between Fe and residual chlorine (r = -0.489 to -0.519, p < 0.01) in spring and summer. Fe and Mn displayed positive correlations with turbidity (r = 0.672 and 0.328, respectively; p < 0.05). In addition, Cr and As were found to be positively associated with some nutrients (NO₃⁻, TN, and SO₄²⁻; r = 0.420-0.786, p < 0.01). The material of the storage tanks had little influence on the difference in heavy metal concentrations. Overall, this survey illustrated that SWSSs may pose a chronic threat to water quality and could provide useful information for practitioners.     

Combined pollution of arsenic and Polymyxin B enhanced arsenic toxicity and enriched ARG abundance in soil and earthworm gut microbiotas

Polymyxin B (PMB) is considered as the last line of antibiotic defense available to humans. The environmental effects of the combined pollution with PMB and heavy metals and their interaction mechanisms are unclear. We explored the effects of the combined pollution with PMB and arsenic (As) on the microbial composition of the soil and in the earthworm gut, as well as the spread and transmission of antibiotic resistance genes (ARGs). The results showed that, compared with As alone, the combined addition of PMB and As could significantly increase the bioaccumulation factor and toxicity of As in earthworm tissues by 12.1% and 16.0%, respectively. PMB treatment could significantly increase the abundance of Actinobacteria in the earthworm gut (from 35.6% to 45.2%), and As stress could significantly increase the abundance of Proteobacteria (from 19.8% to 56.9%). PMB and As stress both could significantly increase the abundance of ARGs and mobile genetic elements (MGEs), which were positively correlated, indicating that ARGs might be horizontally transferred. The inactivation of antibiotics was the main resistance mechanism that microbes use to resist PMB and As stress. Network analysis showed that PMB and As might have antagonistic effects through competition with multi-drug resistant ARGs. The combined pollution by PMB and As significantly promoted the relative abundance of microbes carrying multi-drug resistant ARGs and MGEs, thereby increasing the risk of transmission of ARGs. This research advances the understanding of the interaction mechanism between antibiotics and heavy metals and provides new theoretical guidance for the environmental risk assessment and combined pollution management.     

Herbicide promotes the conjugative transfer of multi-resistance genes by facilitating cellular contact and plasmid transfer

The global dissemination of antibiotic resistance genes(ARGs), especially via plasmidmediated horizontal transfer, is becoming a pervasive health threat. While our previous study found that herbicides can accelerate the horizontal gene transfer(HGT) of ARGs in soil bacteria, the underlying mechanisms by which herbicides promote the HGT of ARGs across and within bacterial genera are still unclear. Here, the underlying mechanism associated with herbicide-promoted HGT was analyzed by detecting intr...     

Removing and recycling mercury from scrubbing solution produced in wet nonferrous metal smelting flue gas purification process

Wet purification technology for nonferrous metal smelting flue gas is important for mercury removal; however, this technology produces a large amounts of spent scrubbing solution that contain mercury. The mercury in these scrubbing solutions pose a great threat to the environment. Therefore, this research provides a novel strategy for removing and recycling mercury from the scrubbing solution, which is significant for decreasing mercury pollution while also allowing for the safe disposal of wastewater and a stable supply of mercury resources. Some critical parameters for the electrochemical reduction of mercury were studied in detail. Additionally, the electrodeposition dynamics and electroreduction mechanism for mercury were evaluated. Results suggested that over 92.4% of mercury could be removed from the scrubbing solution in the form of a Hg-Cu alloy under optimal conditions within 150 min and with a current efficiency of approximately 75%. Additionally, mercury electrodeposition was a quasi-reversible process, and the controlled step was the mass transport of the reactant. A pre-conversion step from Hg(Tu)₄²⁺ to Hg(Tu)₃²⁺ before mercury electroreduction was necessary. Then, the formed Hg(Tu)₃²⁺ on the cathode surface gained electrons step by step. After electrodeposition, the mercury in the spent cathode could be recycled by thermal desorption. The results of the electrochemical reduction of mercury and subsequent recycling provides a practical and easy-to-adopt alternative for recycling mercury resources and decreasing mercury contamination.     

Atmospheric environment monitoring technology and equipment in China: A review and outlook

Accurate monitoring of the atmospheric environment and its evolution are important for understanding the sources, chemical mechanisms, and transport processes of air pollution and carbon emissions in China, and for regulatory and control purposes. This study gives an overview of atmospheric environment monitoring technology and equipment in China and summarizes the major achievements obtained in recent years. China has made great progress in the development of atmospheric environment monitoring technology and equipment with decades of effort. The manufacturing level of atmospheric environment monitoring equipment and the quality of products have steadily improved, and a technical & production system that can meet the requirements of routine monitoring activities has been initiated. It is expected that domestic atmospheric environment monitoring technology and equipment will be able to meet future demands for routine monitoring activities in China and provide scientific assistance for addressing air pollution problems.     

Characteristics of PM2.5 pollution in Beijing after the improvement of air quality

Following the implementation of the strictest clean air policies to date in Beijing, the physicochemical characteristics and sources of PM_2.5 have changed over the past few years. To improve pollution reduction policies and subsequent air quality further, it is necessary to explore the changes in PM_2.5 over time. In this study, over one year (2017–2018) field study based on filter sampling (TH-150C; Wuhan Tianhong, China) was conducted in Fengtai District, Beijing, revealed that the annual average PM_2.5 concentration (64.8 ± 43.1 μg/m³) was significantly lower than in previous years and the highest PM_2.5 concentration occurred in spring (84.4 ± 59.9 μg/m³). Secondary nitrate was the largest source and accounted for 25.7% of the measured PM_2.5. Vehicular emission, the second largest source (17.6%), deserves more attention when considering the increase in the number of motor vehicles and its contribution to gaseous pollutants. In addition, the contribution from coal combustion to PM_2.5 decreased significantly. During weekends, the contribution from EC and NO₃^? increased whereas the contributions from SO₄^2?, OM, and trace elements decreased, compared with weekdays. During the period of residential heating, PM_2.5 mass decreased by 23.1%, compared with non-heating period, while the contributions from coal combustion and vehicular emission, and related species increased. With the aggravation of pollution, the contribution of vehicular emission and secondary sulfate increased and then decreased, while the contribution of NO₃^? and secondary nitrate continued to increase, and accounted for 34.0% and 57.5% of the PM_2.5 during the heavily polluted days, respectively.     

Effective removal of antibiotic resistance genes and potential links with archaeal communities during vacuum-type composting and positive-pressure composting

As a major reservoir of antibiotics,animal manure contributes a lot to the augmented environmental pressure of antibiotic resistance genes(ARGs).This might be the first study to explore the effects of different ventilation types on the control of ARGs and to identify the relationships between archaeal communities and ARGs during the composting of dairy manure.Several ARGs were quantified via Real-time qPCR and microbial communities including bacteria and archaea were analyzed by High-throughput ...