Metallic wastewater treatment by sulfate reduction using anaerobic rotating biological contactor reactor under high metal loading conditions

An-RBC reactor is highly suited to treat metallic wastewater. Metal removal is due to sulfide precipitation via sulfate reduction by SRB. Cu(II) removal was the best among the different heavy metals. Maximum metal removal is achieved at low metal loading condition. Metal removal matched well with the solubility product values of respective metal sulfide salts. This study was aimed at investigating the performance of anaerobic rotating biological contactor reactor treating synthetic wastewater containing a mixture of heavy metals under sulfate reducing condition. Statistically valid factorial design of experiments was carried out to understand the dynamics of metal removal using this bioreactor system. Copper removal was maximum (>98%), followed by other heavy metals at their respective low inlet concentrations. Metal loading rates less than 3.7 mg/L?h in case of Cu(II); less than 1.69 mg/L?h for Ni(II), Pb(II), Zn(II), Fe(III) and Cd(II) are favorable to the performance of the An-RBC reactor. Removal efficiency of the heavy metals from mixture depended on the metal species and their inlet loading concentrations. Analysis of metal precipitates formed in the sulfidogenic bioreactor by field emission scanning electron microscopy along with energy dispersive X-ray spectroscopy (FESEM-EDX) confirmed metal sulfide precipitation by SRB. All these results clearly revealed that the attached growth biofilm bioreactor is well suited for heavy metal removal from complex mixture.     

Pesticides in stormwater runoff−A mini review

• The sources and pathways of pesticides into stormwater runoff were diverse. • Factors affecting pesticides in stormwater runoff were critically reviewed. • Pesticides mitigation strategies were included in this review. • The current knowledge gap of the pesticides in stormwater runoff was identified. Recently, scientific interest has grown in harvesting and treating stormwater for potable water use, in order to combat the serious global water scarcity issue. In this context, pesticides have been identified as the key knowledge gap as far as reusing stormwater is concerned. This paper reviewed the presence of pesticides in stormwater runoff in both rural and urban areas. Specifically, the sources of pesticide contamination and possible pathways were investigated in this review. Influential factors affecting pesticides in stormwater runoff were critically identified as: 1) characteristics of precipitation, 2) properties of pesticide, 3) patterns of pesticides use, and 4) properties of application surface. The available pesticide mitigation strategies including best management practice (BMP), low impact development (LID), green infrastructure (GI) and sponge city (SC) were also included in this paper. In the future, large-scale multi-catchment studies that directly evaluate pesticide concentrations in both urban and rural stormwater runoff will be of great importance for the development of effective pesticides treatment approaches and stormwater harvesting strategies.     

Low-cost adsorbents for urban stormwater pollution control

• Various low-cost adsorbents are studied for capturing urban stormwater pollutants. • Adsorbents are selected based on both pollutant adsorption and unexpected leaching. • Application modes of adsorbents influence their utilization efficacy in practice. Stormwater represents a major non-point pollution source at an urban environment. To improve the treatment efficacy of stormwater infrastructure, low-cost adsorbents have increasingly gained attention over the past decades. This article aims to briefly discuss several key aspects and principles for utilization of low-cost adsorbents for urban stormwater treatment. To determine whether a low-cost adsorbent is suitable for stormwater treatment, two aspects should be carefully assessed, including: 1) its adsorption mechanisms and behaviors that can influence the binding stre.g.,h, adsorption kinetics, and treatment capacity; and 2) unwanted chemical leaching patterns that can affect the extent of water quality degradation. Furthermore, the application mode of an adsorbent in the system design influences the utilization efficiency. Adsorbents, after dosed to soil media in infrastructure, would eventually become ineffective after oversaturation. In contrast, standalone filters or innovative composite adsorbents (e.g., adsorbent-coated mulch chips) can enable a long-lasting adsorption due to periodic replacement with fresh adsorbents. The aforementioned principles play a key role in the success of urban stormwater treatment with low-cost adsorbents.     

Evaluating heavy metal contamination of riverine sediment cores in different land-use areas

• Metal pollution was studied in riverine sediments from different land-use areas. • Cd was the most serious heavy metal contaminant in riverine sediment cores. • Riverine sediment cores from industrial area were most polluted by heavy metals. • B1 fraction determined metal pollution, risk and toxicity in riverine sediments. Anthropogenic activities are regarded as the main sources of heavy metal pollution, yet few studies have investigated the effects of land-use setting on heavy metal accumulation in riverine sediments. Based on both total contents and geochemical fractions, heavy metal pollution, risk and toxicity were determined in riverine sediment cores from different land-use areas (mountain area- MA, farm area- FA, city area- CA, and industrial area- IA) of the Yang River Basin in North China. The results showed that FA had higher contents of riverine sedimentary Cu; CA had higher contents of Cd; IA had higher contents of both Cd and Zn. Most riverine sediments from FA and IA were contaminated with the investigated metals, although these concentrations were evaluated to have low potential ecological risk and no toxicity to benthic organisms. However, a high proportion of Cd in the B1 fraction of riverine sediments in IA indicating high risk should receive more attention. The B1 fraction largely determined the contamination, risk and toxicity levels associated with heavy metals in the riverine sediments of the Yang River Basin.     

Combined Fenton process and sulfide precipitation for removal of heavy metals from industrial wastewater: Bench and pilot scale studies focusing on in-depth thallium removal

Addition of alkali to pH 10 is effective for precipitation of precipitable metals. Fenton treatment is effective for substantial removal of Tl, Cd, Cu, Pb, and Zn. Sulfide precipitation is a final step for removal of trace Tl, Cd, Cu, Pb, and Zn. Bench and pilot studies demonstrated the effectiveness of this combined technique. Thallium (Tl) in industrial wastewater is a public health concern due to its extremely high toxicity. However, there has been limited research regarding Tl removal techniques and engineering practices to date. In this investigation, bench and pilot studies on advanced treatment of industrial wastewater to remove Tl to a trace level were conducted. The treatment process involved a combination of hydroxide precipitation, Fenton oxidation, and sulfide precipitation. While hydroxide precipitation was ineffective for Tl+ removal, it enabled the recovery of approximately 70%–80% of Zn as Zn hydroxide in alkaline conditions. The Fenton process provided good Tl removal (>95%) through oxidation and precipitation. Tl was then removed to trace levels (<1.0 µg/L) via sulfide precipitation. Effective removal of other heavy metals was also achieved, with Cd<13.4 µg/L, Cu<39.6 µg/L, Pb<5.32 µg/L, and Zn<357 µg/L detected in the effluent. X-ray photoelectron spectroscopy indicated that Tl2S precipitate formed due to sulfide precipitation. Other heavy metals were removed via the formation of metal hydroxides during hydroxide precipitation and Fenton treatment, as well as via the formation of metal sulfides during sulfide precipitation. This combined process provides a scalable approach for the in-depth removal of Tl and other heavy metals from industrial wastewater.     

Predicting non-carcinogenic hazard quotients of heavy metals in pepper (Capsicum annum L.) utilizing electromagnetic waves

• There was significant absorption of heavy metals by the pepper in contaminated soils. • The target hazard quotient (THQ) indices followed the order of Pb>Zn>>Cd » Ni. • Relationships exist between contaminated plants and electromagnetic wave. • PCA and random search can select the main spectra and predict THQ for each element. Given the tendency of heavy metals to accumulate in soil and plants, the purpose of this study was to determine the contamination levels of Cd, Ni, Pb, and Zn on peppers (leaves and fruit) grown in contaminated soils in industrial centers. For this purpose, we measured the uptake of the four heavy metals by peppers grown in the heavy metal contaminated soils throughout the four growth stages: two-leaf, growth, flowering, and fruiting, and calculated various vegetation indices to evaluate the heavy metal contamination potentials. Electromagnetic waves were also applied for analyzing the responses of the target plants to various heavy metals. Based on the relevant spectral bands identified by principal component analysis (PCA) and random search methods, a regression method was then employed to determine the most optimal spectral bands for estimating the target hazard quotient (THQ). The THQ was found to be the highest in the plants contaminated by Pb (THQ= 62) and Zn (THQ= 5.07). The results of PCA and random search indicated that the spectra at the bands of b₅₇₀, b₆₅₀, and b₇₆₀ for Pb, b₄₀₀ and b₁₀₃₀ for Ni, b₄₀₀ and b₈₈₀ for Cd, and b₅₆₀, b₉₁₀, and b₁₀₅₀ for Zn were the most optimal spectra for assessing THQ. Therefore, in future studies, instead of examining the amount of heavy metals in plants by chemical analysis in the laboratory, the responses of the plants to the electromagnetic waves in the identified bands can be readily investigated in the field based on the established correlations.     

Sewage sludge ditch for recovering heavy metals can improve crop yield and soil environmental quality

• Indirect use of sludge in ditches alongside plants was tested in field experiments. • The dried and stabilized sludge in ditches was recovered with heavy metals. • Cd, Pb, Cu and Zn in the planted soil were all in a safe range. • The indirect use of sludge increased plant yield, soil N content and C storage. The treatment and disposal of municipal sewage sludge (MSS) is an urgent problem to be resolved in many countries. Safely using the nutrients within MSS to increase crop yield and enhance the fertility of poor soil could contribute to achieving sustainable development. An indirect use of MSS in ditches alongside Pennisetum hybridum plants was studied in field plots for 30 months and the contents of heavy metals and macronutrients were monitored in soil, sludge and plant samples. We found that the yield of P. hybridum was significantly increased by 2.39 to 2.80 times and the treated plants had higher N content compared with no sludge. In addition, the organic matter (OM) and N contents in the planted soil increased significantly compared with the initial soil. The OM content in the planted soil of the MSS treatment was 2.9 to 5.2 times higher than that with no sludge, and N increased by 2.0 to 3.8 times. However, MSS had no significant effect on the N, P and K contents in the soil at the bottom of the MSS ditch, and the content of heavy metals (Cd, Pb, Cu and Zn) were also within the safe range. Moreover, the moisture content and phytotoxicity of MSS after this indirect use were reduced and the heavy metal contents changed little, which is favorable to the further disposal of recovered MSS. Therefore, this indirect use of MSS is beneficial to agricultural production, soil quality and environmental sustainability.     

Cultivars and oil extraction techniques affect Cd/Pb contents and health risks in oil of rapeseed grown on Cd/Pb-contaminated farmland

● Organic solvent extracted fewer Cd/Pb in rapeseed oil than physical pressing. ● Brassica rapa transferred fewer Cd and Pb from seed to oil than Brassica napus . ● Carcinogenic risk mainly from Cd and worth more concern than noncarcinogenic risk. ● Organic solvent specially SLB pose less heath risk for oil than physical pressing. ● Rapeseed oil posed higher carcinogenic risk for rural residents than urban. Substitute planting with rapeseed offers promise for safely using large areas of Cd/Pb-contaminated farmland. Cd/Pb distributions during rapeseed oil production were investigated and health risks posed by the oil were assessed. Tests were performed using three cultivars (Brassica rapa SYH and ZS100 and Brassica napus QY-1) and four oil extraction techniques (mechanical and low-temperature pressing and n-hexane and subcritical low-temperature butane extraction). The amounts of Cd and Pb in oil were 0.73%–8.44% and 3.14%–11.76%, respectively, of the amounts in rapeseed and were strongly affected by the cultivar and oil extraction technique. The heavy metal (HM) concentrations were lower in solvent-extracted oil (particularly subcritical low-temperature butane extracted oil, in which HMs were not detected) than mechanically pressed oil. The Cd and Pb transfer indices were lower (meaning larger proportions of HMs were retained by the rapeseed meal) for B. rapa than B. napus. This was attributed to a high HM binding protein content of B. rapa seed. Health risks to humans were assessed using a probabilistic risk assessment model. The carcinogenic risk was mainly (97.1%–99.9%) caused by Cd and poses more concern than non-carcinogenic risk. Stronger health risks are posed by mechanically pressed than solvent-extracted oil, and higher carcinogenic risks are posed to people living in rural areas than urban areas. Substitute planting with B. rapa and extracting oil with organic solvent (preferably subcritical low-temperature butane) are optimal for safely utilizing Cd/Pb-contaminated soil. Attention should be paid to the health risks posed by Cd in oil to rural populations.     

Different response of bacterial community to the changes of nutrients and pollutants in sediments from an urban river network

• Bacterial community varied spatially in sediments from the urban river network. • Key environmental factors shaping bacterial community were detected by RDA. • Bacterial co-occurrence networks changed at different levels of nutrient and metal. • Potential indicator species were selected to predict pollution risk in sediment. Microbial communities in sediment are an important indicator linking to environmental pollution in urban river systems. However, how the diversity and structure of bacterial communities in sediments from an urban river network respond to different environmental factors has not been well studied. The goal of this study was to understand the patterns of bacterial communities in sediments from a highly dense urbanized river network in the lower Yangtze River Delta by Illumina MiSeq sequencing. The correlations between bacterial communities, the environmental gradient and geographical distance were analyzed by redundancy analysis (RDA) and network methods. The diversity and richness of bacterial community in sediments increased from upstream to downstream consistently with the accumulation of nutrient in the urban river network. Bacterial community composition and structure showed obvious spatial changes, leading to two distinct groups, which were significantly related to the characteristics of nutrient and heavy metal in sediments. Humic substance, available nitrogen, available phosphorus, Zn, Cu, Hg and As were selected as the key environmental factors shaping the bacterial community in sediments based on RDA. The co-occurrence patterns of bacterial networks showed that positive interaction between bacterial communities increased but the connectivity among bacterial genera and stability of sediment ecosystem reduced under a higher content of nutrient and heavy metal in average. The sensitive and ubiquitous taxa with an overproportional response to key environmental factors were detected as indicator species, which provided a novel method for the prediction of the pollution risk of sediment in an urban river network.     

Algae (Raphidocelis subcapitata) mitigate combined toxicity of microplastic and lead on Ceriodaphnia dubia

• Micro-plastics (MPs) significantly increase Pb toxicity. • Algae reduce the combined toxicity of MP and Pb. • The toxicity increase comes from high soluble Pb and MP-Pb uptake. • The toxicity reduction might come from energy related pathway. Microplastics (MPs) have been recognized as a new class of emerging contaminants in recent years. They not only directly impact aquatic organisms, but also indirectly impact these organisms by interacting with background toxins in the environment. Moreover, under realistic environmental conditions, algae, a natural food for aquatic organisms, may alter the toxicity pattern related to MPs. In this research, we first examined the toxicity of MPs alone, and their effect on the toxicity of lead (Pb) on Ceriodaphnia dubia (C. dubia), a model aquatic organism for toxicity survey. Then, we investigated the effect of algae on the combined toxicity of MPs and Pb. We observed that, MPs significantly increased Pb toxicity, which was related to the increase in soluble Pb concentration and the intake of Pb-loaded MPs, both of which increased the accumulation of Pb in C. dubia. The presence of algae mitigated the combined toxicity of MPs and Pb, although algae alone increased Pb accumulation. Therefore, the toxicity mitigation through algae uptake came from mechanisms other than Pb accumulation, which will need further investigation.     

Nutrient status and pollution levels in five areas around a manganese mine in southern China

• The soil TP level was high or extremely high in all areas. • TN, OM and available Cu were insufficient in EA, TA and RA. • All areas reached the heavily polluted level and had high ecological risk levels. • Mn and Cd were the dominant pollutants. Nutrient status and pollution levels are the main factors affecting soil restoration. The nutrient status and pollution levels in five areas, an unexplored mine area (UA), an explored mine area (EA), a tailings area (TA), a reclamation area (RA) and an agricultural area (AA), around the Pingle manganese mine in Guangxi, China, were assessed in this study. The results showed that the average total phosphorus in these five areas ranged from 1.05 to 1.57 mg/kg, corresponding to grades of extremely high and high. The average total nitrogen values were 0.19, 0.69, 0.93, 1.24 and 1.67 mg/kg in EA, TA, RA, UA and AA, corresponding to grades of very low, low, medium-low, medium-high and medium-high, respectively. The average organic matter values were 12.78, 8.92, 22.77, 21.29 and 29.11 mg/kg in EA, TA, RA, UA and AA, which corresponded to grades of medium-low, low, medium-high, medium-high and medium-high, respectively. All these results indicated that the total phosphorus was sufficient in these areas, while the total nitrogen and organic matter were insufficient in EA, TA and RA. The available concentrations of Mn and Zn corresponded to the intermediate grade, while the values for Cu corresponded to the very low grade; these might be another factor restricting ecological reclamation. Contamination and ecological risk assessments based on the single contamination index, Nemerow multi-factor index and potential ecological risk index showed that the five tested areas around the Mn mine were considered heavily polluted and presented high ecological risk. Mn and Cd were the dominant pollutants.     

Electrocoagulation process for the treatment of metal-plating wastewater: Kinetic modeling and energy consumption

The wastewater from industrial area was treated by EC via Fe and Al electrodes. Cu, Ni, Cr and Zn were highly removed at the first minutes, simultaneously. Pseudo-2nd-order was found to be more suitable for kinetics. Adsorption capacities based on kinetic modeling were observed as Cr>Cu>Ni>Zn. The chemical cost in the case of pH adjustment after EC was less as 3.83 $/m³. It is known that wastewater produced by the metal-plating industry contains several heavy metals, which are acidic in nature and therefore toxic for the environment and for living creatures. In particular, heavy metals enter the food chain and accumulate in vital organs and cause serious illness. The precipitation of these metals is mostly achieved by pH adjustment, but as an alternative to this method, the electrocoagulation process has investigated in this study using iron and aluminum electrodes. The effects of the pH adjustment on removal before and after the electrocoagulation process were investigated, and cost analyses were also compared. It was observed that a high proportion of removal was obtained during the first minutes of the electrocoagulation process; thus, the current density did not have a great effect. In addition, the pH adjustment after the electrocoagulation process using iron electrodes, which are 10% more effective than aluminum electrodes, was found to be much more efficient than before the electrocoagulation process. In the process where kinetic modeling was applied, it was observed that the heavy metal removal mechanism was not solely due to the collapse of heavy metals at high pH values, and with this modeling, it was seen that this mechanism involved adsorption by iron and aluminum hydroxides formed during the electrocoagulation process. When comparing the ability of heavy metals to be adsorbed, the sequence was observed to be Cr>Cu>Ni>Zn, respectively.     

Application and mechanism of polysaccharide extracted from Enteromorpha to remove nano-ZnO and humic acid in coagulation process

Green source Ep was extracted from marine alga waste. The molecule model structure of Ep was studied and constructed. PAC-Ep coagulation system improves the efficiency of removal efficiency. Synergistic effects between NPs and HA make a big difference to enhance efficiency. Mechanism is charge neutralization, hydrogen bonding and adsorbing-complexing Enteromorpha polysaccharide (Ep) extracted from alga a novel green coagulant aid for nanoparticles (NPs) and heavy metal ions removal and the structure of EP was intensively studied in this study. The integration of Ep with polyaluminum chloride (PAC-Ep) coagulants exhibited higher coagulation performance than that of the polyaluminum chloride (PAC) because of the negatively charged NPs suspension and humic aid (HA) solution. Significant high removal efficiencies of dissolved organic matter (94.1%), turbidity (99.3%) and Zn ions (69.3%) were achieved by the PAC-Ep coagulants. The dual-coagulation properties of PAC-Ep for different pollutants was based on multiple mechanisms, including (i) Al³⁺ charge neutralization; (ii) hydroxy aluminum hydroxyl bridging formed polynuclearhydroxy complexes bridge and sweep colloidal particles; (iii) adsorption and bridging of Ep chain for the NPs and heavy metal ions. Results indicated that the destabilization of colloid was induced by the coexisting HA and higher removal was achieved as ions adsorption was enhance in the presence of HA complexation. On the basis of that, the extraction of polysaccharide is a promising candidate for its high coagulation performance in water treatment.     

Secondary aerosol formation in winter haze over the Beijing-Tianjin-Hebei Region,China

• Characteristics and interannual variation of aerosol pollution are illustrated. • Mechanisms of secondary aerosol formation in winter haze of North China are reviewed. • Directions in future studies of secondary aerosol formation are provided. Severe haze pollution occurs frequently in the winter over the Beijing-Tianjin-Hebei (BTH) region (China), exerting profound impacts on air quality, visibility, and human health. The Chinese Government has taken strict mitigation actions since 2013 and has achieved a significant reduction in the annual mean PM_2.5 concentration over this region. However, the level of secondary aerosols during heavy haze episodes showed little decrease during this period. During heavy haze episodes, the concentrations of secondary aerosol components, including sulfate, nitrate and secondary organics, in aerosol particles increase sharply, acting as the main contributors to aerosol pollution. To achieve effective control of particle pollution in the BTH region, the precise and complete secondary aerosol formation mechanisms have been investigated, and advances have been made about the mechanisms of gas phase reaction, nucleation and heterogeneous reactions in forming secondary aerosols. This paper reviews the research progress in aerosol chemistry during haze pollution episodes in the BTH region, lays out the challenges in haze formation studies, and provides implications and directions for future research.     

An integrated method for the rapid dewatering and solidification/stabilization of dredged contaminated sediment with a high water content

• An integrated method, called PHDVPSS, was proposed for treating DCS. • The PHDVPSS method showed superior performance compared to conventional method. • Using the method, water content (%) of DCS decreased from 300 to<150 in 3 days. • The 56-day UCS from this method is 12‒17 times higher than conventional method. • Relative to PC, GGBS-MgO binder yielded greater reduction in the leachability. To more efficiently treat the dredged contaminated sediment (DCS) with a high water content, this study proposes an integrated method (called PHDVPSS) that uses the solidifying/stabilizing (S/S) agents and prefabricated horizontal drain (PHD) assisted by vacuum pressure (VP). Using this method, dewatering and solidification/stabilization can be carried out simultaneously such that the treatment time can be significantly shortened and the treatment efficacy can be significantly improved. A series of model tests was conducted to investigate the effectiveness of the proposed method. Experimental results indicated that the proposed PHDVPSS method showed superior performance compared to the conventional S/S method that uses Portland cement (PC) directly without prior dewatering. The 56-day unconfined compressive strength of DCS treated by the proposed method with GGBS-MgO as the binder is 12‒17 times higher than that by the conventional S/S method. DCS treated by the PHDVPSS method exhibited continuous decrease in leaching concentration of Zn with increasing curing age. The reduction of Zn leachability is more obvious when using GGBS-MgO as the binder than when using PC, because GGBS-MgO increased the residual fraction and decreased the acid soluble fraction of Zn. The microstructure analysis reveals the formation of hydrotalcite in GGBS-MgO binder, which resulted in higher mechanical strength and higher Zn stabilization efficiency.     

Sugarcane bagasse amendment improves the quality of green waste vermicompost and the growth of Eisenia fetida

•Earthworms were able to convert green waste into more plant-available nutrients. •The part of heavy metals content increased in the compost added by earthworm. •The addition of SCB to GW did enhance earthworm biomass and humic acid content. •The resulting vermicomposts were characterized by neutral pH and lower EC value. Vermicomposting is a feasible method for disposing of lignocellulosic waste while generating a useful product. The current study assessed the potential of vermicomposting green waste mixed with sugarcane bagasse in proportions of 25%, 50%, and 75% (v:v, based on dry weight). The suitability was evaluated based on the agrochemical properties, earthworm biomass, and phytotoxicity. The final vermicomposts exhibited near-neutral pH values (7.1–7.6), and lower EC values (0.43–0.72 mS/cm) and C:N ratios (14.1–19.9).The content of available nutrients and CEC for all the vermicomposts exceeded those of the control compost (without earthworms). For vermicomposts, the average values of NO₃^–-N, AP, AK, and CEC were 53, 517, 1362 mg/kg, and 158 cmol/kg, respectively. The total contents of heavy metals increased in all vermicompost treatments compared to control composts with the following average final percentages: Zn (2.0%), Cr (15.5%), Pb (23.4%), and Cu (44.3%), but these amounts were safe for application in agroforestry. The addition of sugarcane bagasse to green waste significantly increased the content of total humic substance, humic acid and urease activity, acid and alkaline phosphatase activity, and Eiseniafetida reproduction. The addition of 25% sugarcane bagasse to green waste decreased the toxicity to germinating seeds. These results revealed that vermicomposting is a feasible way to degrade green waste into a value-added chemical product.     

Health impacts of air pollution in China

•Impacts of air pollution on various body systems health in China were highlighted. •China’s actions to control air pollution and their effects were briefly introduced. •Challenges and perspectives of the health effects of air pollution are provided. The health effects of air pollution have attracted considerable attention in China. In this review, the status of air pollution in China is briefly presented. The impacts of air pollution on the health of the respiratory system, the circulatory system, the nervous system, the digestive system, the urinary system, pregnancy and life expectancy are highlighted. Additionally, China’s actions to control air pollution and their effects are briefly introduced. Finally, the challenges and perspectives of the health effects of air pollution are provided. We believe that this review will provide a promising perspective on the health impacts of air pollution in China, and further elicit more attention from governments and researchers worldwide.     

The impacts of economic restructuring and technology upgrade on air quality and human health in Beijing-Tianjin-Hebei region in China

Impacts of industrial restructuring and upgrade on air quality & health are assessed. An integrated approach combining different models is used for the assessment. Industrial technology upgrading is more effective than economic restructuring. Ozone is much more difficult to mitigate than PM_2.5. In this study, we have analyzed possible policy options to improve the air quality in an industrialized region—Beijing, Tianjin and Hebei (BTH) in China. A comprehensive model framework integrating GAINS-China, GEOS-Chem, and IMED/HEL is established to investigate the impacts of various policies on air pollution and health effects. The model establishes a data interface between economic input/output data and the emission inventory of atmospheric pollutants in the BTH region. Based on in-depth analyses of pollutant emission standards, industrial structure, pollution-intensive industries, and emission intensities in BTH and Pearl River Delta, several scenarios are constructed to explore the effectiveness of policy pathways in improving air quality in the BTH region. These scenarios include two categories: the category of “Industrial Technology Upgrade Policy” scenarios that focuses on reducing the emission intensity of industries vs. that of “Industrial Structure Adjustment Policy” scenarios that focuses on adjusting the proportion of industrial value-added. Our results show that the policy path of industrial technology upgrading can be effective and feasible, while economic structure adjustment shows complex and mixed effectiveness. We also find that the proposed policies and measures will be efficient to reduce pollution of primary pollutants and fine particles, but may not effectively mitigate ambient ozone pollution. Ozone pollution is projected to become increasingly severe in BTH, placing a challenge to pollution mitigation strategies that requires further adjustments to address it.     

Identifying factors that influence soil heavy metals by using categorical regression analysis: A case study in Beijing,China

A method was proposed to identify the main influence factors of soil heavy metals. The influence degree of different environmental factors was ranked. Parent material, soil type, land use and industrial activity were main factors. Interactions between some factors obviously affected soil heavy metal distribution. Identifying the factors that influence the heavy metal contents of soil could reveal the sources of soil heavy metal pollution. In this study, a categorical regression was used to identify the factors that influence soil heavy metals. First, environmental factors were associated with soil heavy metal data, and then, the degree of influence of different factors on the soil heavy metal contents in Beijing was analyzed using a categorical regression. The results showed that the soil parent material, soil type, land use type, and industrial activity were the main influencing factors, which suggested that these four factors were important sources of soil heavy metals in Beijing. In addition, population density had a certain influence on the soil Pb and Zn contents. The distribution of soil As, Cd, Pb, and Zn was markedly influenced by interactions, such as traffic activity and land use type, industrial activity and population density. The spatial distribution of soil heavy metal hotspots corresponded well with the influencing factors, such as industrial activity, population density, and soil parent material. In this study, the main factors affecting soil heavy metals were identified, and the degree of their influence was ranked. A categorical regression represents a suitable method for identifying the factors that influence soil heavy metal contents and could be used to study the genetic process of regional soil heavy metal pollution.     

Effects of eggshell addition on calcium-deficient acid soils contaminated with heavy metals

The eggshell was used to remediate the contaminated soil by heavy metals. The eggshell addition decreased the available state of the heavy metals. The available calcium in the soil increased due to eggshell addition. The efficiency was investigated in different moisture conditions. In this study, effects of water conditions (flooded, wet, or dry) and eggshell dosages (0, 0.1, 1.0, and 10.0 g/kg soil, respectively) on pH variation, content of unavailable state of heavy metals, form of heavy metals, and available nutritious element calcium (Ca) in acid soils contaminated with heavy metals were investigated, respectively. The soil samples were continuously cultivated indoors and analyzed by toxicity characteristic leaching procedure and community bureau of reference (BCR) sequential extraction procedure. The results showed that the addition of eggshell could effectively improve the pH of acid soil and increase it to neutral level. Moreover, the contents of unavailable state of heavy metals Cu, Zn, and Cd increased significantly. Furthermore, when the soil was cultivated under the flooded condition with 1.0 g/kg eggshell, the unavailable state of Cu, Zn, and Cd increased the most, and these heavy metals were transformed into residual state. On the other hand, the amount of available state of Ca increased to 432.19 from 73.34 mg/kg with the addition of 1.0 g/kg eggshell, which indicated that the addition of eggshell dramatically improved the available state of Ca. Therefore, eggshell could ameliorate the soil environment as it led to the decrease of available heavy metals and improvement of fertilization effectively. In a word, this study indicates that the addition of eggshell would be a new potential method for remediation of acid field soils contaminated with heavy metals.