A natural analogue of high-pH cement pore waters from the Maqarin area of northern Jordan: Comparison of predicted and observed trace-element chemistry of uranium and selenium

Current design concepts for low-/intermediate-level radioactive waste disposal in many countries involve emplacement underground in a cementitious repository. The highly alkaline groundwaters at Maqarin, Jordan, are a good analogue for the cementitious pore waters that will be present within such a repository. A geochemical modelling study of these groundwaters has been carried out in order to test the applicability of equilibrium models in geochemical programs and their associated thermodynamic databases in such hyperalkaline conditions. This was achieved by comparison of elemental solubilities and speciations predicted by the programs with observations in the natural system. Five organisations took part in the study: AEA Technology, U.K.; Chalmers University of Technology, Sweden; MBT Tecnología Ambiental, Spain; Nagra, Switzerland; and SKB, Sweden. The modelling study was coordinated by the University of Berne.The results of the study showed good agreement between the predictions of the programs employed. Comparison of the observed solids with those predicted by the models has allowed limited validation of the databases. The results for U and Se are presented here.     

Behaviour and fate of nine recycled water trace organics during managed aquifer recharge in an aerobic aquifer

The fate of nine trace organic compounds was evaluated during a 12month large-scale laboratory column experiment. The columns were packed with aquifer sediment and evaluated under natural aerobic and artificial anaerobic geochemical conditions, to assess the potential for natural attenuation of these compounds during aquifer passage associated with managed aquifer recharge (MAR). The nine trace organic compounds were bisphenol A (BPA), 17β-estradiol (E2), 17α-ethynylestradiol (EE2), N-nitrosodimethylamine (NDMA), N-nitrosomorpholine (NMOR), carbamazepine, oxazepam, iohexol and iodipamide. In the low organic carbon content Spearwood sediment, all trace organics were non-retarded with retardation coefficients between 1.0 and 1.2, indicating that these compounds would travel at near groundwater velocities within the aquifer. The natural aerobic geochemical conditions provided a suitable environment for the rapid degradation for BPA, E2, iohexol (half life <1day). Lag-times for the start of degradation of these compounds ranged from <15 to 30days. While iodipamide was persistent under aerobic conditions, artificial reductive geochemical conditions promoted via the addition of ethanol, resulted in rapid degradation (half life <1days). Pharmaceuticals (carbamazepine and oxazepam) and disinfection by-products (NDMA and NMOR) did not degrade under either aerobic or anaerobic aquifer geochemical conditions (half life >50days). Field-based validation experiments with carbamazepine and oxazepam also showed no degradation. If persistent trace organics are present in recycled waters at concentrations in excess of their intended use, natural attenuation during aquifer passage alone may not result in extracted water meeting regulatory requirements. Additional pre treatment of the recycled water would therefore be required.     

Uranium transport around the reactor zone at Bangombé and Okélobondo (Oklo): examples of hydrogeological and geochemical model integration and data evaluation

The sites at Bangombé and Okélobondo (Oklo) in Gabon provide a unique opportunity to study the behaviour of products from natural nuclear reactions in the vicinity of reactor zones which were active around two billion years ago. The Commission of the European Communities initiated the Oklo Natural Analogue Programme. One of the principal aims was to study indications of present time migration of elements from the reactor zones under ambient conditions. The hydrogeological and hydrochemical data from the Oklo sites were modelled in order to better understand the geochemical behaviour of radionuclides in the natural system, by using independent models and by comparing the modelling outcome. Two modelling approaches were used: M3 code (hydrochemical mixing and mass balance model), developed by the Swedish Nuclear Fuel and Waste Management Company (SKB) and HYTEC (reactive transport model) developed by Ecole des Mines de Paris.Two different reactor zones were studied: Bangombé, a shallow site, the reactor being at 11 m depth, and OK84 at Okélobondo, situated at about 450 m depth, more comparable with a real repository location. This allowed the validation of modelling tools in two different sedimentary environments: one shallow, with a more homogeneous layering situated in an area of meteoric alteration, and the other offering the opportunity to study radionuclide migration from the reaction zone over a distance of 450 m through very heterogeneous sedimentary layers.The modeling results indicate that the chemical reactions retarding radionuclide transport are very different at the two sites. At Bangombé, the decomposition of organic material consumes oxygen and at Okélobondo the oxygen is consumed by inorganic reactions resulting, in both cases, in uranium retardation. Both modelling approaches (statistic with M3 code and deterministic with HYTEC code) could describe this situation.The goal of this exercise is to test codes which can help to describe and understand the processes taking place at the sites, validate the models with in situ data, and thus build confidence in the tools used for future site characterization. Ultimately, this allows identifying and selecting processes and parameters that can be used as input into repository performance assessment calculations and modelling exercises.     

Development of steady-state phosphate concentrations in septic system plumes

Long-term monitoring of PO₄⁻³ behaviour in a well-defined septic system plume on calcareous sand (Cambridge site) shows that, after 17 yr of system operation, a distinct PO₄⁻³ plume (PO₄⁻³−P > 1 mg L⁻¹) is present extending 20 m downgradient from the infiltration bed. The PO₄³⁻ plume migration velocity is 1 m yr⁻¹, reflecting retardation by a factor of 20 compared to the groundwater velocity. During monitoring between years 10 to 17, an expanding steady-state zone was noted below the infiltration bed where PO₄³⁻ −P levels remained consistently near 4 mg L⁻¹, a value 25% lower than the average effluent value (6.3 mg L⁻¹). The pattern of attenuation — a 25% mass loss in the 2-m-thick vadose zone, then little further attenuation along the flowpath — is suggestive of a condition of equilibrium with a controlling phosphate mineral phase. Chemical equilibrium modelling shows supersaturation with respect to hydroxylapatite and variscite. Four other field sites are identified from the literature and from our work where similar steady-state PO₄³⁻ zones are present in septic system plumes. In these, steady-state levels range from 15% to 68% of effluent values, with lower concentrations observed in the more acidic plumes, again indicative of a mineral solubility control, possibly variscite.PO₄³⁻ behaviour in these plumes suggests that, although P migration velocity is controlled by the processes of sorption, the magnitude of PO₄³⁻ that is present is governed by the constraints of phosphate mineral solubility. When septic systems on sands are located relatively close to sensitive surface water bodies and when long-term downgradient impact is the primary concern, more attention should be focused on the geochemical conditions that control PO₄³⁻ mineral solubility rather than only on the sorption characteristics of the sediment.     

Uranium transport around the reactor zone at Bangombé and Okélobondo (Oklo): examples of hydrogeological and geochemical model integration and data evaluation

The sites at Bangombé and Okélobondo (Oklo) in Gabon provide a unique opportunity to study the behaviour of products from natural nuclear reactions in the vicinity of reactor zones which were active around two billion years ago. The Commission of the European Communities initiated the Oklo Natural Analogue Programme. One of the principal aims was to study indications of present time migration of elements from the reactor zones under ambient conditions. The hydrogeological and hydrochemical data from the Oklo sites were modelled in order to better understand the geochemical behaviour of radionuclides in the natural system, by using independent models and by comparing the modelling outcome. Two modelling approaches were used: M3 code (hydrochemical mixing and mass balance model), developed by the Swedish Nuclear Fuel and Waste Management Company (SKB) and HYTEC (reactive transport model) developed by Ecole des Mines de Paris. Two different reactor zones were studied: Bangombé, a shallow site, the reactor being at 11 m depth, and OK84 at Okélobondo, situated at about 450 m depth, more comparable with a real repository location. This allowed the validation of modelling tools in two different sedimentary environments: one shallow, with a more homogeneous layering situated in an area of meteoric alteration, and the other offering the opportunity to study radionuclide migration from the reaction zone over a distance of 450 m through very heterogeneous sedimentary layers. The modeling results indicate that the chemical reactions retarding radionuclide transport are very different at the two sites. At Bangombé, the decomposition of organic material consumes oxygen and at Okélobondo the oxygen is consumed by inorganic reactions resulting, in both cases, in uranium retardation. Both modelling approaches (statistic with M3 code and deterministic with HYTEC code) could describe this situation. The goal of this exercise is to test codes which can help to describe and understand the processes taking place at the sites, validate the models with in situ data, and thus build confidence in the tools used for future site characterization. Ultimately, this allows identifying and selecting processes and parameters that can be used as input into repository performance assessment calculations and modelling exercises.     

Models of multi-media partitioning of multi-species chemicals: The fugacity/aquivalence approach

The fugacity or aquivalence approach to environmental modelling is extended to treat chemicals which may be present as several inter-converting species in a multi-media environment. Species-specific and total Z values are defined expressing the capacity of each phase for each species of chemical. Similarly, species-specific and total D values are defined to quantify transport and transformation rates. Fugacity or aquivalence is used as the criterion for partitioning behaviour or physical equilibrium. By defining species proportions on an aquivalence or fugacity fraction basis, the equations for multiple species can be consolidated into a single “pseudo single-component” mass balance equation. Steady-state multi-species, multi-compartment mass balance models can be assembled for such systems and solved in various ways to give mass balances and distributions for all species amounts, concentrations, fluxes and species conversion rates.

Examples are presented for a hypothetical substance present as three species in a system under equilibrium and non-equilibrium, steady-state conditions.     

New perspectives on the passive treatment of ferruginous circumneutral mine waters in the UK

This paper examines major physico-chemical processes during the passive treatment of ferruginous circumneutral drainage from abandoned coal mines in the UK. Data collected over several years of studies on mine water treatment systems shed new light on the relative importance of hydraulics, settling velocity, Fe(II) oxidation rates and cascade aeration, which, in turn, informs the design of future systems. This paper demonstrates that (1) the complex settling behaviour of Fe(III) precipitates may be described by a first-order volumetric process and that settling rate is different for different mine waters; (2) the hydraulic efficiency (ratio of time to peak tracer concentration to nominal residence time) of the settling ponds studied was widely variable at low flow rates in comparison to constructed wetlands; (3) aeration cascades contribute dissolved oxygen and lead to a rise in pH due to CO₂ degassing, which are very important in reducing the required time for iron oxidation and removal; (4) for at least 10 of the 30 sites examined, modelling of the rates of Fe(II) oxidation and particulate settling reveals that removal of iron is primarily dependent on settling rate; and (5) that substantial increases in pH can be brought about by forced aeration of mine water over several hours. Findings of this study apply to the majority of coal mine water treatment sites in the UK and may have broader application to other ferruginous waters with circumneutral pH or after treatment to increase pH.     

Numerical experiments and field results on the size of steady state plumes

Contaminated groundwater poses a serious risk for drinking water supplies. Under certain conditions, however, groundwater contamination remains restricted to a tolerable extent because of natural attenuation processes. We present an innovative approach to evaluate the size of these so-called steady-state plumes by 2-D and 1-D modelling in homogeneous aquifers. If longitudinal mixing is negligible, scenarios can be modelled in a simplified way using a 1-D domain vertical to the direction of flow. We analysed the sensitivity of the plume length with respect to biodegradation kinetics, flow velocity, transverse vertical dispersivity alphat, the source and aquifer geometry and reaction stoichiometry. Our findings indicate that for many readily biodegradable compounds transverse-dispersive mixing rather than reaction kinetics is the limiting factor for natural attenuation. Therefore, if alphat, aquifer and source geometry and concentrations of electron acceptors and donors are known, the length of the steady state contaminant plume can be predicted. The approach is validated under field conditions for an ammonium plume at a former landfill site in SW Germany.     

The evolution of mass balance models of persistent organic pollutant fate in the environment

Current approaches to modelling the fate of persistent organic pollutants (POPs) in the environment have evolved in response to four dominant characteristics of these substances; namely: (1) the presence of POPs in virtually all environmental phases and the ease with which they move from one to the other requires multi-compartmental modelling. Describing transport across phase boundaries becomes as, or even more, important as quantifying transport within the phases; (2) POPs may persist in the environment for many decades. For chemicals that 'have time', concepts such as equilibrium partitioning and steady-state become more important than for short-lived substances whose fate is more controlled by the rates of transformation; (3) measuring POPs is difficult and expensive and observed concentrations of POPs are not available in high spatial or temporal resolution. Consequently, high resolution tends not to be a high priority in POP models; and (4) detrimental effects of POPs often manifest themselves in top predators, which has led to a focus on modelling biotic uptake and transfer within food chains. The task of building a POPs model is viewed as combining the four 'building blocks' of partitioning, transport, transformation and source data with the help of the law of the conservation of mass. Process models, evaluative models, models of real local, regional and global fate, as well as biological uptake models are presented and references to numerous examples are provided. An attempt is made to forecast future directions in the field of POPs modelling. It is expected that modelling techniques that do not rely on quantitative emission estimates as well as approaches that take into account spatial, temporal and climatic variability as well as parameter uncertainty will increase in importance. Finally, the relationship between modelling POPs and models of other pollutant issues is addressed, as are potential interactions between POPs and pollutant issues such as eutrophication, acidification and global climate change.     

Using chemical models for evaluating the geochemical confinement capacity of a geological barrier application to the Centre de Stockage de l'Aube (France)

The feasibility of using a chemical reaction-based approach for evaluating and modelling the role of adsorption reactions in determining the geochernical confinement capacity of natural geological barriers is being studied as part of an on-going R & D programme. The confined superficial aquifer underlying the Centre de Stockage de l'Aube facility, a geological barrier for this site, has been used as a case study with the following aims. First, development of a site characterisation protocol and demonstration of its use to determine the principal geochemical characteristics of aquifer materials using batch experiments and to represent the information obtained in terms of a chemical model. The experimental results obtained for Ni²⁺ partitioning as a function of total Ni, pH, total Ca and total solid can be satisfactorily represented in terms of reactions with an ion exchange site and a single amphoteric surface hydroxyl site with ferrihydrite reaction constants. A second objective is the incorporation of the reactions in a coupled geochemistry/transport code, and to verify the applicability of the coupled code predictions for Ni²⁺ mass transfer by comparison with the results obtained during column tracer experiments. The breakthrough curve and equilibrium solid phase Ni loading, predicted by a one-dimensional coupled model for a column tracer experiment, agree closely with observed data.Additional studies are underway to reduce model conditionality, to extend the adsorption model to other analogue cations and anions, to incorporate the effect of natural organic matter and to take into consideration precipitation/dissolution of amorphous Fe surface phases.     

Oxidation of trichloroethene over metal oxide catalysts: kinetic studies and correlation with adsorption properties

The performance of bulk chromium oxide is compared with that of a Mn commercial catalyst for the deep oxidation of trichloroethene (1000-2500ppmv, 55h(-1) space velocity) in air, in dry and wet (20000ppm of H(2)O) conditions, in terms of activity, selectivity and stability. Chromium oxide was found to be more active (on a catalyst weight basis), however its activity decreases continuously with time on stream. The presence of water increases its stability, the Mn catalyst showing the opposite behaviour. The effect of water on the Cr catalyst can be explained according to the Deacon equilibrium, as the presence of water tends to decrease the Cl(2) concentration, assumed to be responsible of the catalyst deactivation. Regarding to the selectivity, the Mn catalyst yields C(2)Cl(4), CCl(4) and CHCl(3) as organochlorinated by-products, whereas chromium oxide produces only trace amounts of CCl(4). Simple power-law kinetics expressions (first-order for Mn and zero-order for Cr) provide fairly good fits for the evolution of the conversion with the temperature. Furthermore, the kinetic behaviour of chromium oxide can be represented with a Langmuir-Hinshelwood model taking into account the chlorine inhibitory effect.     

Cosolvent effects on sorption isotherm linearity

Sorption-desorption hysteresis, slow desorption kinetics, and other nonideal phenomena have been attributed to the differing sorptive characteristics of the natural organic polymers associated with soils and sediments. In this study, aqueous and mixed solvent systems were used to investigate the effects of a cosolvent, methanol, on sorption isotherm linearity with natural organic matter (NOM), and to evaluate whether these results support, or weaken, the rubbery/glassy polymer conceptualization of NOM. All of the sorption isotherms displayed some nonlinear character. Our data indicates that all of the phenanthrene and atrazine isotherms were nonlinear up to the highest equilibrium solution concentration to solute solubility in water or cosolvent ratios (Ce/Sw,c) used, approximately 0.018 and 0.070, respectively. Isotherm linearity was also observed to increase with volumetric methanol content (fc). This observation is consistent with the NOM rubbery/glassy polymer conceptualization: the presence of methanol in NOM increased isotherm linearity as do solvents in synthetic polymers, and suggests that methanol is interacting with the NOM, enhancing its homogeneity as a sorptive phase so that sorption is less bimodal as fc increases. When the equilibrium solution concentration was normalized for solute solubility in water or methanol-water solutions, greater relative sorption magnitude was observed for the methanol-water treatments. This observation, in conjunction with the faster sorption kinetics observed in the methanol-water sediment column systems, indicates that the increase in relative sorption magnitude with fc may be attributed to the faster sorption kinetics in the methanol-water systems, and hence, greater relative sorptive uptake for the rubbery polymer fraction of NOM at similar time scales.     

Using PM10 geochemical maps for defining the origin of atmospheric pollution in Andalusia (Southern Spain)

In this work we present a detailed study of atmospheric PM₁₀ pollution in Andalusia (Southern Spain) based on geochemical maps. The study includes determination of PM₁₀ levels and bulk chemical composition with samples from 17 representative monitoring stations (rural, urban background, traffic hot spot, and urban zones with industrial influence) during 2007. The knowledge of background levels and concentrations of relevant chemical compounds and elements allows the quantification of the main sources of pollution in relevant cities and sites of ecological interest.In comparison to other stations in Spain and mainland Europe, PM₁₀ in Andalusia is characterized by high levels of crustal matter and secondary inorganic components (SIC). This has been attributed to the following causes: 1) High road traffic and industrial emissions, 2) High frequency of North African air mass outbreaks contributing between 3 and 4 μg m^?3 in western Andalusia and 4–7 μg m^?3 in eastern Andalusia, and 3) Climate factors such as low rainfall, dry soils favouring resuspension, and high photochemical activity.Atmospheric particulate matter in urban areas located in the vicinity of industrial estates is enriched in secondary inorganic compounds and metals. Three main hot spots have been identified according their high trace element concentrations: Huelva (As, Cu, Zn, Se, and Bi), Strait of Gibraltar (V, Ni, Cr, and Co) and Bailén (V and Ni). The transport of pollutants from cities and industrial estates to areas of ecological interest (e.g. Doñana National Park) has been found to cause the increase in background levels in a number of trace elements (e.g. As) in the air. An important outcome of this study is that geochemical maps of atmospheric matter are a powerful tool for illustrating spatial variation patterns of geochemical components and identifying specific pollution hot spots.     

The effect of operating variables on chelant-assisted remediation of contaminated dredged sediment

The paper shows the results from a number of lab-scale washing treatments using the four chelating agents EDTA, NTA, citric acid and [S,S]-EDDS aiming at the remediation of a real heavy metal-contaminated sediment. Investigation of the influence of chelant type and concentration as well as solution pH was the major focus of the work. The analysis of speciation of metals and chelating agents in solution was carried out through geochemical speciation modelling in order to identify the optimal conditions for the washing process as well as to evaluate the competition phenomena of metal-chelant complexes in solution. The major competing cations were found to be Ca above all and Mg under specific conditions. Among the investigated chelating agents, EDDS appeared to be less affected by competition by major cations while ensuring adequate heavy metal extraction efficiencies. For a 1:1 chelant/metal ratio, the following ranking was observed: EDDS>Cit>NTA>EDTA for As, EDDS>NTA congruent withEDTA>Cit for Cu, EDDS congruent withEDTA congruent withNTA>Cit for Zn, EDTA>NTA>EDDS>Cit for Pb at pH 5 and EDTA congruent withEDDS congruent withNTA>Cit for Pb at pH 8. For a 10:1 chelant/metal ratio geochemical modelling indicated that at the equilibrium the extracting solutions were dominated by the free form of the chelating agents, indicating the inability of such species to complex trace metals due the strong interactions existing between heavy metal ions and sediment constituents.     

Trace element mobility in a contaminated soil two years after field-amendment with a greenwaste compost mulch

Application of greenwaste compost to brownfield land is increasingly common in soil and landscape restoration. Previous studies have demonstrated both beneficial and detrimental effects of this material on trace element mobility. A pot experiment with homogenised soil/compost investigated distribution and mobility of trace elements, two years after application of greenwaste compost mulch to shallow soils overlying a former alkali-works contaminated with Pb, Cu and As (∼900, 200 and 500 mg kg⁻¹, respectively). Compost mulch increased organic carbon and Fe in soil pore water, which in turn increased As and Sb mobilization; this enhanced uptake by lettuce and sunflower. A very small proportion of the total soil trace element pool was in readily-exchangeable form (<0.01% As, <0.001% other trace elements), but the effect of compost on behaviour of metals was variable and ambiguous. It is concluded that greenwaste compost should be applied with caution to multi-element contaminated soils.     

Planting woody crops on dredged contaminated sediment provides both positive and negative effects in terms of remediation

There is currently a requirement for studies focusing on the long-term sustainability of phytoremediation technologies. Trace element uptake by Salix, Populus and Alnus species planted in dredged contaminated canal sediment and concentrations in sediment and pore waters were investigated, eight years after a phytoremediation trial was initiated in NW England. Soil biological activity was also measured using invertebrate and microbial assays to determine soil quality improvements. Zinc was the dominant trace metal in foliage and woody stems, and the most mobile trace element in sediment pore water (∼14 mg l⁻¹). Biological activity had improved; earthworm numbers had increased from 5 to 24, and the QBS index (an index of microarthropod groups in soil) had increased from 70 to 88. It is concluded that biological conditions had improved and natural processes appear to be enhancing soil quality, but there remains a potential risk of trace element transfer to the wider environment.     

Biomonitoring of trace element air pollution: principles,possibilities and perspectives

This paper discusses the biomonitoring of trace element air pollution. Much attention is given to both lichens and mosses as the dominant plant species used in biomonitoring surveys. Biomonitoring is regarded as a means to assess trace element concentrations in aerosols and deposition. This implies that the monitor should concentrate the elements of interest and quantitatively reflect its elemental ambient conditions. Environmental impact on the biomonitor's behaviour is viewed as resulting in changes in the dose-response relationships. The current literature is briefly reviewed, for plant's behaviour modelling, for laboratory studies on physiological processes responsible for accumulation, retention and release, and for field work on quantification of dose-response relationships. Monitoring of elemental atmospheric availability is presented as deriving its relevance from presumed impact on both ecosystem performance and human health; source apportionment is regarded as an important parallel result for purposes of emission regulatory management. For source apportionment, the paper argues in favor of multi-elemental determinations, supplemented by information on organic compounds and elemental chemical forms. Furthermore, the discussion points towards more explicit coupling of biomonitoring data to knowledge and databases on both emission registration, ecosystem performance and human health. This means that multidisciplinary programs should be set up, which accommodate expert inputs from biomonitoring, emission control programs, analytical chemistry, ecology, and epidemiology.     

Transformation pathways of hexachlorocyclopentadiene in the aquatic environment

-- An environmental assessment of the transformation and transport pathways of hexachlorocyclopentadiene (hex) in simulated aquatic ecosystems is presented. Hydrolytic and photolytic disappearance rate constants in distilled and natural waters and in sediment-water systems are given. Sediments in defined sediment-water systems do not significantly affect the disappearance rate constants, compared to distilled water values, for the hydrolytic and photolytic processes. Water solubility, octanol/water partition coefficient, and vapor pressure for hex are also reported and compared with literature values. Fate and transport assessment using an evaluative model indicates that hex will not likely reach substantial steady-state concentrations in the various compartments of the simulated ecosystems. The results also indicate that photolysis and, to a lesser extent, hydrolysis are the predominant degradation processes; export via the water column is the predominant transport process.