Endocrine disruptors compounds, pharmaceuticals and personal care products in urban wastewater: implications for agricultural reuse and their removal by adsorption process

In the last years, a lot of emerging contaminants, such as, endocrine disruptors compounds (EDCs), pharmaceuticals, and personal care products (PPCPs) have been detected in wastewater. Because of their toxicity and possible adverse effects on the environment and humans, their release from urban wastewater treatment plants (UWWTPs) effluents should be minimized, particularly when a wastewater reuse for crops irrigation is expected. Many processes have been investigated for advanced treatment of UWWTP effluents as well as for emerging contaminant degradation; among these, adsorption process was successfully used to remove EDCs and PPCPs from wastewater. This article shortly reviews EDCs and PPCPs removal from UWWTP effluents by adsorption process using conventional and non-conventional adsorbents. The fate of EDCs and PPCPs in UWWTPs and the implications for agricultural wastewater reuse has been addressed too. In spite of the adsorption process looking to be a valuable alternative to other advanced technologies for the removal of emerging contaminants from wastewater, some gaps still remain to evaluate the actual feasibility at full scale. However, according to a few studies available in scientific literature on the use of both powdered activated carbon and granular activated carbon at full scale, adsorption process by activated carbon is a promising, potentially effective, and economically feasible solution for producing safe wastewater for agricultural reuse.     

Toward long solids retention time of activated sludge processes: benefits in energy saving, effluent quality, and stability

The activated sludge process is the most common method of secondary municipal wastewater treatment; solids retention time (SRT) is the key control parameter for this process. Typically, operating at long SRT is considered only for nitrification, but there are additional benefits of high SRT operation. This paper presents experimental and literature evidence to demonstrate three major additional benefits of long SRT operation: increased oxygen transfer efficiency; improved biomass particle size distribution, which results in more efficient clarification with fewer effluent particles and suspended solids; and enhanced removal of many emerging contaminants such as pharmaceuticals, personal care products, and endocrine disrupting compounds. This paper presents experimental results from several treatment plants that showed increasing oxygen transfer efficiency and particle size with increasing SRT, and evidence documenting improved removal of emerging contaminants and biodegradable organic carbon. A long-term survey of three treatment plants concludes that operating at higher SRT is not as energy intensive as typically assumed.     

Mass balance of pharmaceutical and personal care products in a pilot-scale single-sludge system: influence of T, SRT and recirculation ratio

The influence of operation condition on the fate of 16 pharmaceutical and personal care products (PPCPs) in a single-sludge nitrifying/denitrifying pilot plant was assessed. Volatilisation, sorption and degradation were included in the mass balances to determine the most relevant removal mechanisms during PPCP treatment.Sludge retention time (SRT) was an important factor for the removal of compounds that significantly sorb onto sludge, as ethinylestradiol, whose removal increased 11% when working at SRT above 20 d. The internal recirculation ratio was significant for the removal of moderately biodegradable compounds, as citalopram. The positive effect of operating at warmer temperatures was particularly significant for two antibiotics, implying a 30% increase in their transformations. In the case of naproxen, an influence of sludge acclimation and concentration was observed, leading to removal efficiencies from 27% to 99%.Concerning removal mechanisms, most compounds were removed due to biotransformation, although for fragrances sorption and volatilisation played a role.     

Rapid resolution liquid chromatography-tandem mass spectrometry method for the determination of endocrine disrupting chemicals (EDCs), pharmaceuticals and personal care products (PPCPs) in wastewater irrigated soils

A multiresidue analytical method was developed for the determination of 9 endocrine disrupting chemicals (EDCs) and 19 pharmaceuticals and personal care products (PPCPs) including acidic and neutral pharmaceuticals in water and soil samples using rapid resolution liquid chromatography-tandem mass spectrometry (RRLC-MS/MS). Solid phase extraction (SPE), and ultrasonic extraction combined with silica gel purification were applied as pretreatment methods for water and soil samples, respectively. The extracts of the EDCs and PPCPs in water and soil samples were then analyzed by RRLC-MS/MS in electrospray ionization (ESI) mode in three independent runs. The chromatographic mobile phases consisted of Milli-Q water and acetonitrile for EDCs and neutral pharmaceuticals, and Milli-Q water containing 0.01 % acetic acid (v/v) and acetonitrile: methanol (1:1, v/v) for acidic pharmaceuticals at a flow rate of 0.3 mL/min. Most of the target compounds exhibited signal suppression due to matrix effects. Measures taken to reduce matrix effects included use of isotope-labeled internal standards, and application of matrix-match calibration curves in the RRLC-MS/MS analyses. The limits of quantitation ranged between 0.15 and 14.08 ng/L for water samples and between 0.06 and 10.64 ng/g for solid samples. The recoveries for the target analytes ranged from 62 to 208 % in water samples and 43 to 177 % in solid samples, with majority of the target compounds having recoveries ranging between 70–120 %. Precision, expressed as the relative standard deviation (RSD), was obtained less than 7.6 and 20.5 % for repeatability and reproducibility, respectively. The established method was successfully applied to the water and soil samples from four irrigated plots in Guangzhou. Six compounds namely bisphenol-A, 4-nonylphenol, triclosan, triclocarban, salicylic acid and clofibric acid were detected in the soils.     

Combined anaerobic/aerobic digestion: effect of aerobic retention time on nitrogen and solids removal

A combined anaerobic/aerobic sludge digestion system was studied to determine the effect of aerobic solids retention time (SRT) on its solids and nitrogen removal efficiencies. After the anaerobic digester reached steady state, effluent from the anaerobic digester was fed to aerobic digesters that were operated at 2- to 5-day SRTs. The anaerobic system was fed with a mixture of primary and secondary sludge from a local municipal wastewater treatment plant. Both systems were fed once per a day. The aerobic reactor was continuously aerated with ambient air, maintaining dissolved oxygen level at 1.1 +/- 0.3 mg/L. At a 4-day or longer SRT, more than 11% additional volatile solids and 90% or greater ammonia were removed in the aerobic digester, while 32.8 mg-N/L or more nitrite/nitrate also was measured. Most total Kjeldahl nitrogen removal was via ammonia removal, while little organic nitrogen was removed in the aerobic digester.     

Toward a high-rate enhanced biological phosphorus removal process in a membrane-assisted bioreactor.

A membrane enhanced biological phosphorus removal (MEBPR) process was studied to determine the impact of hydraulic retention time (HRT) and solids retention time (SRT) on the removal of chemical oxygen demand (COD), nitrogen, and phosphorus from municipal wastewater. The MEBPR process was capable of delivering complete nitrification independent of the prevailing operating conditions, whereas a significant improvement in COD removal efficiency was observed at longer SRTs. In the absence of carbon-limiting conditions, the MEBPR process was able to achieve low phosphorus concentrations in the effluent at increasingly higher hydraulic loads, with the lowest HRT being 5 hours. The MEBPR process was also able to maintain optimal phosphorus removal when the SRT was increased from 12 to 20 days. However, at higher suspended solids concentrations, a substantial increase was observed in carbon utilization per unit mass of phosphorus removed from the influent. These results offer critical insights to the application of membrane technology for biological nutrient removal systems.     

Endocrine disrupting compounds in municipal and industrial wastewater treatment plants in Northern Greece

The occurrence and fate of endocrine disrupting compounds (EDCs) in a sewage treatment plant and two industrial wastewater treatment plants from textile and tannery factories were investigated. EDCs of interest are 4-nonylphenol, 4-octylphenol, their ethoxylate oligomers (mono- and di-ethoxylates of nonylphenol and octylphenol), bisphenol A, triclosan and steroid estrogens. Target compounds were determined in dissolved fraction, total suspended solids and sludge by employing solid phase extraction and ultrasonication followed by gas chromatography–mass spectrometry.Nonylphenols and oligomers with one or two ethoxy groups were the most abundant compounds in raw wastewater as well as in effluents from all the treatment stages of sewage treatment plant, followed by triclosan and bisphenol A. Steroids were found at very low concentrations. Almost all phenolic EDCs compounds were predominantly associated to suspended solids in influents whereas the dissolved fraction dominated the treated effluents. High removal rates, ranging from 86% to 99%, were observed throughout the whole treatment process. Biodegradation was the main removal pathway of EDCs. Tannery wastewaters exhibited high concentrations of nonylphenolic compounds. This type of wastewaters could pose a significant risk to the aquatic and terrestrial environment.     

The fate and risk of selected pharmaceutical and personal care products in wastewater treatment plants and a pilot-scale multistage constructed wetland system

The removal of 12 pharmaceuticals and personal care products (PPCPs) in two full-scale wastewater treatment plants (WWTPs) and a tertiary treatment system was studied. The ecological risks of effluents from both secondary and tertiary treatment systems as well as excess sludge were evaluated. Primary treatment and ultraviolet light disinfection showed limited ability to remove most selected PPCPs. The combination of an anaerobic process and triple-oxidation ditches can eliminate DEET better than the anaerobic/anoxic/oxic process. Adsorption to sludge played a key role in the removal of triclocarban. Multistage constructed wetlands as a tertiary treatment efficiently removed caffeine and ibuprofen from wastewater and could decrease the risk of partial selected PPCPs. Selected PPCPs residues in excess sludge generally produced higher risks to the ecological environment than effluents from WWTPs.     

Influence of ozone pre-treatment on sludge anaerobic digestion: removal of pharmaceutical and personal care products

The effect of an oxidative pre-treatment with ozone on the removal of Pharmaceutical and Personal Care Products (PPCPs) during the anaerobic digestion of sewage sludge has been investigated. Besides, the digested sludge characteristics in terms of pathogens content, dewatering properties, heavy metals content and linear alkylbenzene sulfonates (LAS) were determined. During ozonation (20mg O(3)/g TSS), about 8% of volatile solids (VS) and 60% of the chemical oxygen demand (COD) were solubilized. However, no mineralization was observed. The elimination of VS and total COD during anaerobic digestion were not affected by ozone treatment with efficiencies ranging from 60% to 65%. All PPCPs considered were removed during anaerobic treatment of sludge, with efficiencies ranging from 20% to 99%. No significant influence of ozone pre-treatment was observed on PPCPs elimination except for carbamazepine. Pathogens, heavy metals and LAS contents after conventional and pre-ozonation treatment of sewage sludge were below the legal requirements. However, the dewatering properties of sludge were deteriorated when the ozone pre-treatment was applied.     

Broad range analysis of endocrine disruptors and pharmaceuticals using gas chromatography and liquid chromatography tandem mass spectrometry

Endocrine disrupting compounds (EDCs) and pharmaceuticals and personal care products (PPCPs) have been globally detected in impacted natural waters. The detection of trace quantities of EDCs and PPCPs in the environment is of great concern since some of these compounds have known physiological responses at low concentrations. EDCs can have a wide range of polarities, acidic and basic moieties, and exist in trace quantities, which often requires numerous complex extractions, large sample collection volumes, and multiple instrumental analyses. A comprehensive method has been developed allowing for the analysis of 58 potential EDCs in various water matrices using a single solid-phase extraction (SPE) of a 1 L sample with subsequent analyses using both gas chromatography and liquid chromatography, each coupled with tandem mass spectrometry (GC–MS/MS and LC–MS/MS). Instrument detection limits ranged between 0.12–7.5 pg with corresponding method reporting limits of 1–10 ng l⁻¹ in water. Recoveries for most compounds were between 50% and 112% with good reproducibility (RSD 6–22%).     

Occurrence and removal of six pharmaceuticals and personal care products in a wastewater treatment plant employing anaerobic/anoxic/aerobic and UV processes in Shanghai,China

The occurrence and removal of six pharmaceuticals and personal care products (PPCPs) including caffeine (CF), N, N-diethyl-meta-toluamide (DEET), carbamazepine, metoprolol, trimethoprim (TMP), and sulpiride in a municipal wastewater treatment plant (WWTP) in Shanghai, China were studied in January 2013; besides, grab samples of the influent were also taken every 6 h, to investigate the daily fluctuation of the wastewater influent. The results showed the concentrations of the investigated PPCPs ranged from 17 to 11,400 ng/L in the WWTP. A low variability of the PPCP concentrations in the wastewater influent throughout the day was observed, with the relative standard deviations less than 25 % for most samples. However, for TMP and CF, the slight daily fluctuation still reflected their consumption patterns. All the target compounds except CF and DEET, exhibited poor removal efficiencies (<40 %) by biological treatment process, probably due to the low temperature in the bioreactor, which was unfavorable for activated sludge. While for the two biodegradable PPCPs, CF, and DEET, the anaerobic and oxic tank made contributions to their removal while the anoxic tank had a negative effect to their elimination. The tertiary UV treatment removed the investigated PPCPs by 5–38 %, representing a crucial polishing step to compensate for the poor removal by the biologic treatment process in winter.     

Removal of organic and nitrogen and molecular weight distribution of residual soluble organic from entrapped mixed microbial cells and activated sludge processes.

The simultaneous removal of organic and nitrogen and molecular weight distribution (MWD) of residual soluble chemical oxygen demand (RSCOD) in final effluent were investigated using entrapped mixed microbial cells (EMMC) and conventional activated sludge processes. Two different types of processes using EMMC carriers demonstrated better organic and nitrogen removal performance because of the high solids retention time (SRT) compared with the activated sludge process. Regarding the RSCOD, the longer SRT process (EMMC) was affected by reducing the hydraulic retention time, resulting in the increase of high-molecular-weight materials. On the other hand, reducing the aeration period had significantly affected the MWD in the shorter SRT process (activated sludge), resulting in an increase of low-molecular-weight materials.     

Synthesized magnetic nanoparticles coated zeolite for the adsorption of pharmaceutical compounds from aqueous solution using batch and column studies

The contamination of fresh water with pharmaceutical and personal care products (PPCPs) has risen during the last few years. The adsorption of some PPCPs namely, Diclofenac-Na, Naproxen, Gemfibrozil and Ibuprofen from aqueous solution has been studied, magnetic nanoparticles coated zeolite (MNCZ) has been used as the adsorbent. Batch adsorption experiment was conducted to study the influences of different adsorption parameters such as contact time, solution pH and PPCPs concentrations in order to optimize the reaction conditions. The removal was favored at low pH values. Thus, as pH turns from acidic to basic conditions these compounds were less efficiently removed. The initial concentration does not appear to exert a noticeable effect on the removal efficiency of the studied PPCPs at low concentrations, but it showed less removal efficiency during high concentration of PPCPs especially for Ibuprofen. The removal of Diclofenac-Na was independent on time, while the contact time was of significant effect on the adsorption of Naproxen, Gemfibrozil and Ibuprofen even though these compounds were removed up to 95% during 10 min using MNCZ. From the isotherm adsorption study, the adsorption of PPCPs studied on MNCZ was best fitted with Freundlich isotherm equation. Pseudo-second order model providing the best fit model with the experimental data. Column adsorption study was conducted to compare the removal efficiency of MNCZ with other processes used at drinking water treatment plants (DWTPs), MNCZ showed high removal efficiency (>99%) than other used processes at DWTPs.     

Long-term comparison of trace organics removal performances between conventional and membrane activated sludge processes.

The removal of trace organic compounds through membrane bioreactors (MBR) compared with a conventional wastewater treatment plant (WWTP) in a long-term study was investigated. Two MBR pilot plants were operated in parallel to a full-scale WWTP fed with the same municipal raw wastewater. Polar compounds (phenazone-type pharmaceuticals, their metabolites, and carbamazepine) and less polar estrogenic steroids (estradiol, estrone, and ethinylestradiol) were quantified. The removal rate of phenazone, propyphenazone, and formylaminoantipyrine by the conventional WWTP was less than 15%. Significantly higher removal rates (60 to 70%) started to be clearly monitored in the pilot plants after approximately 5 months. Higher removal rates coincided with higher temperatures in the summer. The conventional WWTP removed, on average, more than 90% of the natural steroids estrone and estradiol and approximately 80% of the synthetic ethinylestradiol. Approximately 99% of estradiol and estrone and approximately 95% of ethinylestradiol was eliminated by the MBR processes.     

Fate of pharmaceuticals and personal care products in wastewater treatment plants - Conception of a database and first results

We created a database in order to quantitatively assess the occurrence and removal efficiency of pharmaceuticals and personal care products (PPCPs) in wastewater treatment plants (WWTPs). From 117 scientific publications, we compiled 6641 data covering 184 PPCPs. Data included the concentrations of PPCPs in WWTP influents and effluents, their removal efficiency and their loads to the aquatic environment. The first outputs of our database allowed to identify the most investigated PPCPs in WWTPs and the most persistent ones, and to obtain reliable and quantitative values on their concentrations, frequency of detection and removal efficiency in WWTPs. We were also able to compare various processes and pointed out activated sludge with nitrogen treatment and membrane bioreactor as the most efficient ones.     

Pharmaceutical removal in tropical subsurface flow constructed wetlands at varying hydraulic loading rates

Determining the fate of emerging organic contaminants in an aquatic ecosystem is important for developing constructed wetlands (CWs) treatment technology. Experiments were carried out in subsurface flow CWs in Singapore to evaluate the fate and transport of eight pharmaceutical compounds. The CW system included three parallel horizontal subsurface flow CWs and three parallel unplanted beds fed continuously with synthetic wastewater at different hydraulic retention times (HRTs). The findings of the tests at 2-6 d HRTs showed that the pharmaceuticals could be categorized as (i) efficiently removed compounds with removal higher than 85% (ketoprofen and salicylic acid); (ii) moderately removed compounds with removal efficiencies between 50% and 85% (naproxen, ibuprofen and caffeine); and (iii) poorly removed compounds with efficiency rate lower than 50% (carbamazepine, diclofenac, and clofibric acid). Except for carbamazepine and salicylic acid, removal efficiencies of the selected pharmaceuticals showed significant (p<0.05) enhancement in planted beds as compared to the unplanted beds. Removal of caffeine, ketoprofen and clofibric acid were found to follow first order decay kinetics with decay constants higher in the planted beds than the unplanted beds. Correlations between pharmaceutical removal efficiencies and log K(ow) were not significant (p>0.05), implying that their removal is not well related to the compound's hydrophobicity.     

Evaluation of PPCPs removal in a combined anaerobic digester-constructed wetland pilot plant treating urban wastewater

The removal efficiency of 16 pharmaceuticals and personal care products (PPCPs) from urban wastewater (dissolved and particulate phases) was evaluated for the first time in a hybrid pilot plant consisting of an upflow anaerobic sludge blanket reactor followed by two sequentially connected horizontal flow constructed wetlands: a surface flow wetland (SF CW) and a subsurface flow wetland (SSF CW). Whereas the PPCP removal associated with the dissolved phase exhibited a seasonal pattern, the fraction associated with the suspended solids showed less seasonality. In the dissolved phase, the overall removal efficiency in summer ranged from 70% to 85% for salicylic acid (SAL), methyl dihydrojasmonate, caffeine (CAF), ketoprofen and triclosan, whereas in winter it declined for most of the PPCPs to between 30% and 50%, except for CAF and SAL (>80%) and carbamazepine and butylated hydroxyl toluene (11-18%). In the suspended solids, the removal exceeded 80% for most of the target PPCPs. The efficiency of the different treatment steps was also compound-dependent, but the SF CW generally exhibited the highest removal efficiency for most of the contaminants analyzed. The characterization of the organic matter retained in the wetland gravel beds revealed the occurrence of hydrophobic contaminants such as phthalate esters and fragrances at moderate concentrations (i.e., up to 3.5 μg kg⁻¹), which declined strongly over the course of the different treatment steps. In the SF CW, the net mass accumulation rates of tonalide and galaxolide were 4 and 23 g y⁻¹ respectively, whereas in the SSF CW they were 0.3 and 1.8 g y⁻¹ respectively.     

Effect of operational parameters on the removal of particulate chemical oxygen demand in the activated sludge process.

The removal of particulate material in the aeration basin of the activated sludge process is mainly attributed to bioflocculation and hydrolysis of particulate substrate. The bioflocculation process in the aeration tank of the activated sludge process occurs only under favorable conditions in the system, and several common operational parameters affect its performance. The principal objective of this research was to observe the effect of mixed liquor suspended solids, solids retention time (SRT), and extracellular polymer substances on the removal of particulate substrate by bioflocculation. A first-order particulate removal expression, based on flocculation, accurately described the removal rates for supernatant suspended solids and colloidal chemical oxygen demand. Based on the results presented in this investigation, a mixed liquor concentration of approximately 2200 mg/L, an SRT of at least 3 days, and a contact time of 30 minutes are needed for relatively complete removal of the particulate substrate in a plug-flow reactor.     

Occurrences of pharmaceutical and personal care products as micropollutants in rivers from Romania

The occurrence of pharmaceutical and personal care products (PPCPs) was investigated in the Somes River. The aim of this study was to obtain a first overview about the contamination of Somes River (Transylvania) with PPCPs. The samples were preconcentrated by Solid Phase Extraction (SPE) procedures and analysed by GC/MS. A number of 15 compounds including pharmaceutics, metabolites, intermediates and musk fragrances were detected in concentration ranging from 30 ng/l to 10 μg/l. The detected pharmaceuticals are included in following therapeutic groups: analgesics, antiepileptics, psychiatric, stimulants, anticoagulants, antineoplastic and disinfectants.     

污泥龄对LSP & PNR污泥减量新工艺运行效能的影响

通过研究分析污泥龄（SRT）对富磷污水除磷的LSP&PNR污泥减量新工艺运行效果的影响,结果发现,延长污泥龄有利于提高系统的厌氧释磷能力,但不影响其总的除磷率,同时磷的回收比例增大,当SRT=50 d时,磷回收率取得最大值70.4％;LSP&PNR系统污泥龄增加,还有利于污泥产率的降低。试验还发现,排富磷污水除磷的长污泥龄LSP&PNR系统的除磷效率与污泥产率之间不存在制约关系,即系统可以同时获得优异的污泥减量与生物除磷效果,当SRT=50 d时,每降解1 kg COD仅产生0.143 kg污泥,而除磷率达最高值928％;LSP&PNR系统中SRT、DO与SVI之间存在一定的相关性,在供氧充足（DO＝0.8～1.5 mg/L）条件下,SRT增加,SVI越高,但对于SRT为50 d的LSP&PNR系统,稳定运行时没有污泥膨胀之虞。