NiB2O4 (B = Mn or Co) catalysts for NH3-SCR of NOx at low-temperature in microwave field

● Microwave-assisted catalytic NH₃-SCR reaction over spinel oxides is carried out. ● SCR reaction temperature is tremendously lowered in microwave field. ● NO conversion of NiMn₂O₄ is highly up to 90.6% at 70°C under microwave heating. Microwave-assisted selective catalytic reduction of nitrogen oxides (NO_x) was investigated over Ni-based metal oxides. The NiMn₂O₄ and NiCo₂O₄ catalysts were synthesized by the co-precipitation method and their activities were evaluated as potential candidate catalysts for low-temperature NH₃-SCR in a microwave field. The physicochemical properties and structures of the catalysts were characterized by X-ray diffraction (XRD), Scanning electron microscope (SEM), N₂-physisorption, NO adsorption-desorption in the microwave field, H₂-temperature programmed reduction (H₂-TPR) and NH₃-temperature programmed desorption (NH₃-TPD). The results verified that microwave radiation reduced the reaction temperature required for NH₃-SCR compared to conventional heating, which needed less energy. For the NiMn₂O₄ catalyst, the catalytic efficiency exceeded 90% at 70 °C and reached 96.8% at 110 °C in the microwave field. Meanwhile, the NiMn₂O₄ also exhibited excellent low-temperature NH₃-SCR reaction performance under conventional heating conditions, which is due to the high BET specific surface area, more suitable redox property, good NO adsorption-desorption in the microwave field and rich acidic sites.     

Tailoring the simultaneous abatement of methanol and NOx on Sb-Ce-Zr catalysts via copper modification

● Cu addition enhances CH₃OH oxidation and alleviates its inhibitory effect on SCR. ● Cu addition improves the activation of SCR reactants in the presence of methanol. ● Damaged structure by more Cu addition decreases specific surface area and acidity. ● Excessive Cu addition would lead to the narrowing of SCR temperature window. Simultaneously removal of NO_x and VOCs over NH₃-SCR catalysts have attracted lots of attention recently. However, the presence of VOCs would have negative effect on deNO_x efficiency especially at low temperature. In this study, copper modification onto Sb_0.5CeZr₂O_x (SCZ) catalyst were performed to enhance the catalytic performance for simultaneous control of NO_x and methanol. It was obtained that copper addition could improve the low-temperature activity of both NO_x conversion and methanol oxidation, where the optimal catalyst (Cu_0.05SCZ) exhibited a deNO_x activity of 96% and a mineralization rate of 97% at 250 °C, which are around 10% higher than that of Cu free sample. The characterization results showed that copper addition could obviously enhance the redox capacity of the catalysts. As such, the inhibition effect of methanol incomplete oxidation on NO adsorption and NH₃ activation were then lessened and the conversion of surface formamide species were also accelerated, resulting in the rising of NO_x conversion at low temperature. However, excessive copper addition would damage the Sb-Ce-Zr oxides solid solution structure owing to Cu-Ce strong interactions, decreasing the surface area and acidity. Meanwhile, due to easier over-oxidation of NH₃ with more Cu addition, the temperature window for NO_x conversion would become quite narrow. These findings could provide useful guidelines for the synergistic removal of VOCs over SCR catalyst in real application.     

Efficient production of hydrogen peroxide in microbial reverse-electrodialysis cells coupled with thermolytic solutions

● Appreciable H₂O₂ production rate was achieved in MRCs utilizing NH₄HCO₃ solutions. ● Carbon black outperformed activated carbon as the catalyst for H₂O₂ production. ● The optimum carbon black loading for H₂O₂ production on air-cathode was 10 mg/cm². ● The optimum number of cell pairs was determined to be three. ● A maximum power density of 980 mW/m² was produced by MRCs with 5 cell pairs. H₂O₂ was produced at an appreciable rate in microbial reverse-electrodialysis cells (MRCs) coupled with thermolytic solutions, which can simultaneously capture waste heat as electrical energy. To determine the optimal cathode and membrane stack configurations for H₂O₂ production, different catalysts, catalyst loadings and numbers of membrane cell pairs were tested. Carbon black (CB) outperformed activated carbon (AC) for H₂O₂ production, although AC showed higher catalytic activity for oxygen reduction. The optimum CB loading was 10 mg/cm² in terms of both the H₂O₂ production rate and power production. The optimum number of cell pairs was determined to be three based on a tradeoff between H₂O₂ production and capital costs. A H₂O₂ production rate as high as 0.99 ± 0.10 mmol/(L·h) was achieved with 10 mg/cm² CB loading and 3 cell pairs, where the H₂O₂ recovery efficiency was 52 ± 2% and the maximum power density was 780 ± 37 mW/m². Increasing the number of cell pairs to five resulted in an increase in maximum power density (980 ± 21 mW/m²) but showed limited effects on H₂O₂ production. These results indicated that MRCs can be an efficient method for sustainable H₂O₂ production.     

Highly effective visible-photocatalytic hydrogen evolution and simultaneous organic pollutant degradation over an urchin-like oxygen-doped MoS2/ZnIn2S4 composite

● An urchin-like OMS/ZIS composite was fabricated by a facile solvothermal method. ● The OMS/ZIS exhibits superior photocatalytic H₂ evolution for organics degradation. ● A probable mechanism of dual-functional photocatalysis was proposed in detail. ● This work provides an inspiration for rational design of dual-functional catalysts. Achieving hydrogen production and simultaneous decomposition of organic pollutants through dual-functional photocatalytic reactions has received increasing attention due to the environmentally friendly and cost-effective characteristics of this approach. In this work, an urchin-like oxygen-doped MoS₂/ZnIn₂S₄ (OMS/ZIS) composite was fabricated for the first time using a simple solvothermal method. The unique microstructure with abundant active sites and fast charge transfer channels further shortened the charge migration distance and compressed carrier recombination. The obtained composite exhibited an efficient H₂ evolution reaction rate of 12.8 mmol/g/h under visible light, which was nearly times higher than pristine ZnIn₂S₄, and the apparent quantum efficiency was 14.9% (420 nm). The results of the simultaneous photocatalytic H₂ evolution and organic pollutant decomposition test were satisfactory, resulting in decomposition efficiencies of resorcinol, tetracycline, and bisphenol A that reached 41.5%, 63.5%, and 53.0% after 4 h, respectively, and the highest H₂ evolution rate was 672.7 μmol/g/h for bisphenol A. Furthermore, natural organic matter (NOM) abundantly found in actual water was adopted as an electron donor for H production under simulated sunlight irradiation, indicating the promising practicability of simultaneous hydrogen evolution and NOM decomposition. Moreover, the mechanisms of the dual-purpose photocatalytic reactions, as well as the synergistic effect between the molecular structures of the organic pollutants and the corresponding adsorption behavior on the photocatalyst surface were illustrated in detail. These obtained results may serve as an inspiration for the rational design of highly efficient, dual-functional photocatalysts in the future.     

Revealing the GHG reduction potential of emerging biomass-based CO2 utilization with an iron cycle system

● Greenhouse gas mitigation by biomass-based CO₂ utilization with a Fe cycle system. ● The system including hydrothermal CO₂ reduction with Fe and Fe recovery by biomass. ● The reduction potential quantified by experiments, simulations, and an ex-ante LCA. ● The greatest GHG reduction potential is −34.03 kg CO₂-eq/kg absorbed CO₂. ● Ex-ante LCA supports process optimization to maximize GHG reduction potential. CO₂ utilization becomes a promising solution for reducing anthropogenic greenhouse gas (GHG) emissions. Biomass-based CO₂ utilization (BCU) even has the potential to generate negative emissions, but the corresponding quantitative evaluation is limited. Herein, the biomass-based CO₂ utilization with an iron cycle (BCU-Fe) system, which converts CO₂ into formate by Fe under hydrothermal conditions and recovers Fe with biomass-derived glycerin, was investigated. The GHG reduction potential under various process designs was quantified by a multidisciplinary method, including experiments, simulations, and an ex-ante life-cycle assessment. The results reveal that the BCU-Fe system could bring considerable GHG emission reduction. Significantly, the lowest value is −34.03 kg CO₂-eq/kg absorbed CO₂ (−2.44 kg CO₂-eq/kg circulated Fe) with the optimal yield of formate (66%) and Fe (80%). The proposed ex-ante evaluation approach not only reveals the benefits of mitigating climate change by applying the BCU-Fe system, but also serves as a generic tool to guide the industrialization of emerging carbon-neutral technologies.     

New insights into the formation of ammonium nitrate from a physical and chemical level perspective

● Factor analysis of ammonium nitrate formation based on thermodynamic theory. ● Aerosol liquid water content has important role on the ammonium nitrate formation. ● Contribution of coal combustion and vehicle exhaust is significant in haze periods. High levels of fine particulate matter (PM_2.5) is linked to poor air quality and premature deaths, so haze pollution deserves the attention of the world. As abundant inorganic components in PM_2.5, ammonium nitrate (NH₄NO₃) formation includes two processes, the diffusion process (molecule of ammonia and nitric acid move from gas phase to liquid phase) and the ionization process (subsequent dissociation to form ions). In this study, we discuss the impact of meteorological factors, emission sources, and gaseous precursors on NH₄NO₃ formation based on thermodynamic theory, and identify the dominant factors during clean periods and haze periods. Results show that aerosol liquid water content has a more significant effect on ammonium nitrate formation regardless of the severity of pollution. The dust source is dominant emission source in clean periods; while a combination of coal combustion and vehicle exhaust sources is more important in haze periods. And the control of ammonia emission is more effective in reducing the formation of ammonium nitrate. The findings of this work inform the design of effective strategies to control particulate matter pollution.     

Effects of iron oxide nanoparticles on phenotype and metabolite changes in hemp clones (Cannabis sativa L.)

● Fe₃O₄ NPs increased the biomass and chlorophyll content of hemp clones. ● Fe₃O₄ NPs penetrated and were internalized by root cells. ● Fe₃O₄ NPs induced the alteration of metabolite profiles in hemp leaves. ● The psychoactive compound THC in hemp leaves was significantly down-regulated. We investigated the effect of iron oxide nanoparticles (Fe₃O₄ NPs, ~17 nm in size) on the phenotype and metabolite changes in hemp (Cannabis sativa L.), an annual crop distributed worldwide. Hemp clones were grown in hydroponic cultures with Fe₃O₄ NPs (50, 100, 200, or 500 mg/L) for four weeks. TEM and ICP-MS were used to determine Fe₃O₄ NPs uptake and translocation. LC-MS-based metabolomics was employed to explore the deep insight into the effect of Fe₃O₄ NPs on hemp plants. The results revealed that plant growth enhanced gradually with increasing concentrations of given NPs up to 200 mg/L, which improved the fresh weight and dry weight by 36.13% and 74.68%, respectively, compared to the control. Even at a high dose (500 mg/L), Fe₃O₄ NPs promoted plant growth, including increased biomass and tissue length. NPs significantly increased the iron and chlorophyll content in plant tissues Increased catalase activity and reduced hydrogen peroxide content in hemp leaves suggested that the Fe₃O₄ NPs activated the defense system. TEM showed that NPs were abundantly attached to the cell wall and dispersed throughout the root cells. Metabolomics revealed that Fe₃O₄ NPs induced metabolic reprogramming in hemp leaves, including the up-regulation of carbohydrates and organic acids, and down-regulation of antioxidants, especially tetrahydrocannabinol (THC). The significantly up-regulated metabolites, including peonidin and 2-hydroxycinnamic acid, could be involved in photosynthesis in hemp plants. These results demonstrate the potential of Fe₃O₄ NPs for promoting hemp growth and decreasing the THC content at low doses.     

Stress response to nanoplastics with different charges in Brassica napus L. during seed germination and seedling growth stages

● Higher concentrations of PS, PS-NH₂ and PS-SO₃H inhibited seed germination. ● PS, PS-NH₂ and PS-SO₃H influenced seedling growth in a dose-dependent manner. ● PS, PS-NH₂ and PS-SO₃H reduced essential nutrients uptake and plant quality. ● PS, PS-NH₂ and PS-SO₃H increased antioxidant enzyme activities and MDA content. ● Nanoplastic toxicity was related to surface charges. Nanoplastic pollution has become a significant problem in farmland systems worldwide. However, research on the effects of nanoplastics (NPs) with different charges on field crops is still limited. In our study, NPs with different charges, including unmodified polystyrene nanoplastics (PS), positively charged polystyrene nanoplastics (PS-NH₂), and negatively charged polystyrene nanoplastics (PS-SO₃H), were investigated for their impacts on seed germination and seedling growth of rape. The results showed that seed water uptake (after 12 h), seed germination, seed vigour, and relative root elongation were all significantly reduced under exposure to NPs (200 mg/L). Similarly, remarkable decreases in plant biomass (root weight, shoot weight), growth (root length, plant height), photosynthesis ability (chlorophyll a, chlorophyll b, carotenoids), essential nutrient uptake (Fe, Mn, Zn, Cu), and plant quality (soluble protein, soluble sugar, crude fibre content) of rape seedlings were also observed after exposure to NPs. Among the three kinds of NPs, PS-NH₂ showed stronger effects. Moreover, superoxide dismutase, peroxidase, and catalase activities of rape seedlings were changed, and the content of malondialdehyde was significantly increased under exposure to NPs. Furthermore, positively charged PS-NH₂ showed stronger effects on the phenotype, physiology, biochemistry, nutrient uptake, and plant quality of rape. Notably, a comprehensive toxicity evaluation revealed that PS-NH₂ had the strongest toxicity to rape. The present study provides important implications for the interaction and risk assessment of NPs and crops in soil-plant systems.     

Photo-induced surface frustrated Lewis pairs for promoted photocatalytic decomposition of perfluorooctanoic acid

● Terminal carboxylate group activation is PFOA degradation’s rate-limiting step. ● Bi₃O(OH)(PO₄)₂ with surface frustrated Lewis pairs (SFLPs) efficiently degrade PFOA. ● Photo-induced Lewis acidic sites and proximal surface hydroxyls constitute SFLPs. ● SFLPs act as collection centers to effectively adsorb PFOA. ● SFLPs endow accessible pathways for photogenerated holes rapid transfer to PFOA. Heterogeneous photocatalysis has gained substantial research interest in treating per- and polyfluoroalkyl substances (PFAS)-contaminated water. However, sluggish degradation kinetics and low defluorination efficiency compromise their practical applications. Here, we report a superior photocatalyst, defected Bi₃O(OH)(PO₄)₂, which could effectively degrade typical PFAS, perfluorooctanoic acid (PFOA), with high defluorination efficiency. The UV light irradiation could in situ generate oxygen vacancies on Bi₃O(OH)(PO₄)₂ through oxidation of the lattice hydroxyls, which further promotes the formation of Lewis acidic coordinately unsaturated bismuth sites. Then, the Lewis acidic sites couple with the proximal surface hydroxyls to constitute the surface frustrated Lewis pairs (SFLPs). With the in-depth spectroscopic analysis, we revealed that the photo-induced SFLPs act as collection centers to effectively adsorb PFOA and endow accessible pathways to transfer photogenerated holes to PFOA rapidly. Consequently, activation of the terminal carboxyl, a rate-limiting step for PFOA decomposition, could be easily achieved over the defected Bi₃O(OH)(PO₄)₂ photocatalyst. These results suggest that SFLPs exhibit great potential in developing highly efficient photocatalysts to degrade persistent organic pollutants.     

Distribution,enrichment mechanism and risk assessment for fluoride in groundwater: a case study of Mihe-Weihe River Basin,China

● High fluorine is mainly HCO₃·Cl-Na and HCO₃-Na type. ● F⁻ decreases with the increase of depth to water table. ● High fluoride is mainly affected by fluorine-containing minerals and weak alkaline. ● Fluorine pollution is mainly in the north near Laizhou Bay (wet season > dry season). ● Groundwater samples have a high F⁻ health risk (children > adults). Due to the unclear distribution characteristics and causes of fluoride in groundwater of Mihe-Weihe River Basin (China), there is a higher risk for the future development and utilization of groundwater. Therefore, based on the systematic sampling and analysis, the distribution features and enrichment mechanism for fluoride in groundwater were studied by the graphic method, hydrogeochemical modeling, the proportionality factor between conventional ions and factor analysis. The results show that the fluorine content in groundwater is generally on the high side, with a large area of medium-fluorine water (0.5–1.0 mg/L), and high-fluorine water is chiefly in the interfluvial lowlands and alluvial-marine plain, which mainly contains HCO₃·Cl-Na- and HCO₃-Na-type water. The vertical zonation characteristics of the fluorine content decrease with increasing depth to the water table. The high flouride groundwater during the wet season is chiefly controlled by the weathering and dissolution of fluorine-containing minerals, as well as the influence of rock weathering, evaporation and concentration. The weak alkaline environment that is rich in sodium and poor in calcium during the dry season is the main reason for the enrichment of fluorine. Finally, an integrated assessment model is established using rough set theory and an improved matter element extension model, and the level of groundwater pollution caused by fluoride in the Mihe-Weihe River Basin during the wet and dry seasons in the Shandong Peninsula is defined to show the necessity for local management measures to reduce the potential risks caused by groundwater quality.     

Long-term exposure to air pollution and cerebrovascular disease: findings from Beijing Health Management Cohort study

● This study explored the long-term association by double robust additive models. ● Individual exposure concentrations were assessed by integrating GAM, LUR and BPNN. ● PM_2.5, SO₂ and NO₂ are positively associated with cerebrovascular disease. ● CO could reduce the risk of cerebrovascular disease with the highest robustness. ● The elderly, women and people with normal BMI are at higher risk for air pollution. The relationship between air pollution and cerebrovascular disease has become a popular topic, yet research findings are highly heterogeneous. This study aims to investigate this association based on detailed individual health data and a precise evaluation of their exposure levels. The integrated models of generalized additive model, land use regression model and back propagation neural network were used to evaluate the exposure concentrations. And doubly robust additive model was conducted to explore the association between cerebrovascular disease and air pollution after adjusted for demographic characteristics, physical examination, disease information, geographic and socioeconomic status. A total of 25097 subjects were included in the Beijing Health Management Cohort from 2013 to 2018. With a 1 μg/m³ increase in the concentrations of PM_2.5, SO₂ and NO₂, the incidence risk of cerebrovascular disease increased by 1.02 (95% CI: 1.008–1.034), 1.06 (95% CI: 1.034–1.095) and 1.02 (95% CI: 1.010–1.029) respectively. Whereas CO exposure could decrease the risk, with an odds ratio of 0.38 (95% CI: 0.212–0.626). In the subgroup analysis, individuals under the age of 50 with normal BMI were at higher risk caused by PM_2.5, and SO₂ was considered more hazardous to women. Meanwhile, the protective effect of CO on women and those with normal BMI was stronger. Successful reduction of long-term exposure to PM_2.5, SO₂ and NO₂ would lead to substantial benefits for decrease the risk of cerebrovascular disease especially for the health of the susceptible individuals.     

Insights into the electron transfer mechanisms of permanganate activation by carbon nanotube membrane for enhanced micropollutants degradation

● A CNT filter enabled effective KMnO₄ activation via facilitated electron transfer. ● Ultra-fast degradation of micropollutants were achieved in KMnO₄/CNT system. ● CNT mediated electron transfer process from electron-rich molecules to KMnO₄. ● Electron transfer dominated organic degradation. Numerous reagents have been proposed as electron sacrificers to induce the decomposition of permanganate (KMnO₄) by producing highly reactive Mn species for micropollutants degradation. However, this strategy can lead to low KMnO₄ utilization efficiency due to limitations associated with poor mass transport and high energy consumption. In the present study, we rationally designed a catalytic carbon nanotube (CNT) membrane for KMnO₄ activation toward enhanced degradation of micropollutants. The proposed flow-through system outperformed conventional batch reactor owing to the improved mass transfer via convection. Under optimal conditionals, a > 70% removal (equivalent to an oxidation flux of 2.43 mmol/(h·m²)) of 80 μmol/L sulfamethoxazole (SMX) solution can be achieved at single-pass mode. The experimental analysis and DFT studies verified that CNT could mediate direct electron transfer from organic molecules to KMnO₄, resulting in a high utilization efficiency of KMnO₄. Furthermore, the KMnO₄/CNT system had outstanding reusability and CNT could maintain a long-lasting reactivity, which served as a green strategy for the remediation of micropollutants in a sustainable manner. This study provides new insights into the electron transfer mechanisms and unveils the advantages of effective KMnO₄ utilization in the KMnO₄/CNT system for environmental remediation.     

Is atmospheric oxidation capacity better in indicating tropospheric O3 formation?

● This study summarizes and evaluates different approaches that indicate O₃ formation. ● Isopleth and sensitivity methods are useful but have many prerequisites. ● AOC is a better indicator of photochemical reactions leading to O₃ formation. Tropospheric ozone (O₃) concentration is increasing in China along with dramatic changes in precursor emissions and meteorological conditions, adversely affecting human health and ecosystems. O₃ is formed from the complex nonlinear photochemical reactions from nitrogen oxides (NO_x = NO + NO₂) and volatile organic compounds (VOCs). Although the mechanism of O₃ formation is rather clear, describing and analyzing its changes and formation potential at fine spatial and temporal resolution is still a challenge today. In this study, we briefly summarized and evaluated different approaches that indicate O₃ formation regimes. We identify that atmospheric oxidation capacity (AOC) is a better indicator of photochemical reactions leading to the formation of O₃ and other secondary pollutants. Results show that AOC has a prominent positive relationship to O₃ in the major city clusters in China, with a goodness of fit (R²) up to 0.6. This outcome provides a novel perspective in characterizing O₃ formation and has significant implications for formulating control strategies of secondary pollutants.     

Electrocatalytic reduction of nitrate using Pd-Cu modified carbon nanotube membranes

● Pd-Cu modified CNT membranes were prepared successfully by electrodeposition method. ● The deposition voltage and deposition time were optimized for Pd-Cu co-deposition. ● NO₃⁻-N was removed efficiently from water by Pd-Cu modified CNT membranes. ● The presence of dissolved oxygen did not affect the nitrate reduction performance. ● Mass transfer rate was promoted significantly with the increase in membrane flux. Excessive nitrate in water is harmful to the ecological environment and human health. Electrocatalytic reduction is a promising technology for nitrate removal. Herein, a Pd-Cu modified carbon nanotube membrane was fabricated with an electrodeposition method and used to reduce nitrate in a flow-through electrochemical reactor. The optimal potential and duration for codeposition of Pd and Cu were −0.7 V and 5 min, respectively, according to linear scan voltammetry results. The membrane obtained with a Pd:Cu ratio of 1:1 exhibited a relatively high nitrate removal efficiency and N₂ selectivity. Nitrate was almost completely reduced (~99 %) by the membrane at potentials lower than −1.2 V. However, −0.8 V was the optimal potential for nitrate reduction in terms of both nitrate removal efficiency and product selectivity. The nitrate removal efficiency was 56.2 %, and the N₂ selectivity was 23.8 % for the Pd:Cu=1:1 membrane operated at −0.8 V. Nitrate removal was enhanced under acidic conditions, while N₂ selectivity was decreased. The concentrations of Cl⁻ ions and dissolved oxygen showed little effect on nitrate reduction. The mass transfer rate constant was greatly improved by 6.6 times from 1.14 × 10⁻³ m/h at a membrane flux of 1 L/(m²·h) to 8.71 × 10⁻³ m/h at a membrane flux of 15 L/(m²·h), which resulted in a significant increase in the nitrate removal rate from 13.6 to 133.5 mg/(m²·h). These findings show that the Pd-Cu modified CNT membrane is an efficient material for nitrate reduction.     

Current status of municipal wastewater treatment plants in North-east China: implications for reforming and upgrading

● The performance and costs of 20 municipal WWTPs were analyzed. ● Effluent COD and NH₄⁺-N effluent exceed the limits more frequently in winter. ● Nitrification and refractory pollutant removal are limited at low temperatures. ● To meet the national standards, electricity cost must increase by > 42% in winter. ● Anammox, granular sludge, and aerobic denitrification are promising technologies. Climate affects the natural landscape, the economic productivity of societies, and the lifestyles of its inhabitants. It also influences municipal wastewater treatment. Biological processes are widely employed in municipal wastewater treatment plants (WWTPs), and the prolonged cold conditions brought by the winter months each year pose obstacles to meeting the national standards in relatively cold regions. Therefore, both a systematic analysis of existing technical bottlenecks as well as promising novel technologies are urgently needed for these cold regions. Taking North-east China as a case, this review studied and analyzed the main challenges affecting 20 municipal WWTPs. Moreover, we outlined the currently employed strategies and research issues pertaining to low temperature conditions. Low temperatures have been found to reduce the metabolism of microbes by 58% or more, thereby leading to chemical oxygen demand (COD) and NH₄⁺-N levels that have frequently exceeded the national standard during the winter months. Furthermore, the extracellular matrix tends to lead to activated sludge bulking issues. Widely employed strategies to combat these issues include increasing the aeration intensity, reflux volume, and flocculant addition; however, these strategies increase electricity consumption by > 42% in the winter months. Internationally, the processes of anaerobic ammonium oxidation (anammox), granular sludge, and aerobic denitrification have become the focus of research for overcoming low temperature. These have inspired us to review and propose directions for the further development of novel technologies suitable for cold regions, thereby overcoming the issues inherent in traditional processes that have failed to meet the presently reformed WWTP requirements.     

Separation/degradation behavior and mechanism for cationic/anionic dyes by Ag-functionalized Fe3O4-PDA core-shell adsorbents

● PDA-Fe₃O₄-Ag was made by hydrothermal and oxidation self-polymerization method. ● PDA-Fe₃O₄-Ag had great magnetic separation performance. ● PDA-Fe₃O₄-Ag had good adsorption and degradation performance for ionic dyes. ● PDA-Fe₃O₄-Ag showed NR and MO degradation potential of 91.2% and 87.5%, respectively. High-performance adsorbents have been well-studied for the removal of organic dye pollutants to promote environment remediation. In this study, an Ag nanoparticle-functionalized Fe₃O₄-PDA nanocomposite adsorbent (PDA-Fe₃O₄-Ag) was synthesized, and the adsorption/separation performance of commonly used cationic and anionic organic dyes by the PDA-Fe₃O₄-Ag adsorbent were assessed. Overall, PDA-Fe₃O₄-Ag exhibited a significantly higher adsorption capacity for cationic dyes compared to anionic dyes, the highest of which was more than 110.0 mg/g (methylene blue (MB)), which was much higher than not only the adsorption capacities of the anionic dyes in this study but also other dye adsorption capacities reported in the literature. The dye adsorption kinetics data fitted well to both the pseudo second-order kinetics model and the Langmuir isotherm model, suggesting a monolayer-chemisorption-dominated adsorption mode. Thermodynamics analysis indicated that the adsorption process was both endothermic and spontaneous. Furthermore, the PDA-Fe₃O₄-Ag adsorbent achieved high photodegradation removal rates of the dyes, especially neutral red (NR) and methyl orange (MO), which were 91.2% and 87.5%, respectively. With the addition of PDA-Fe₃O₄-Ag, the degradation rate constants of NR and MO increased from 0.08 × 10⁻² and 0 min⁻¹ to 2.11 × 10⁻² and 1.73 × 10⁻² min⁻¹, respectively. The high adsorption and photocatalytic degradation performance of the PDA-Fe₃O₄-Ag adsorbent make it an excellent candidate for removing cationic and anionic dyes from the industrial effluents.     

Electroconductive RGO-MXene membranes with wettability-regulated channels: improved water permeability and electro-enhanced rejection performance

● Electroconductive RGO-MXene membranes were fabricated. ● Wettable membrane channels were established between RGO and MXene nanosheets. ● Hydrophilic MXene reduces the resistance of water entering the membrane channels. ● Water permeance of RGO-MXene membrane is 16.8 times higher than that of RGO membrane. ● Electro-assistance can enhance the dye rejection performance of RGO-MXene membrane. Reduced graphene oxide (RGO) membranes are theoretically more conducive to the rapid transport of water molecules in their channels compared with graphene oxide (GO) membranes, as they have fewer oxygen-containing functional groups and more non-oxidized regions. However, the weak hydrophilicity of RGO membranes inhibits water entry into their channels, resulting in their low water permeability. In this work, we constructed wettable RGO-MXene channels by intercalating hydrophilic MXene nanosheets into the RGO membrane for improving the water permeance. The RGO-MXene composite membrane exhibits high pure water permeance of 62.1 L/(m²·h·bar), approximately 16.8 times that of the RGO membrane (3.7 L/(m²·h·bar)). Wettability test results and molecular dynamics simulations suggest that the improved water permeance results from the enhanced wettability of RGO-MXene membrane and increased rate of water molecules entering the RGO-MXene channels. Benefiting from good conductivity, the RGO-MXene membrane with electro-assistance exhibits significantly increased rejection rates for negatively charged dyes (from 56.0% at 0 V to 91.4% at 2.0 V for Orange G) without decreasing the permeate flux, which could be attributed to enhanced electrostatic repulsion under electro-assistance.     

Fluorescence detection of phosphate in an aqueous environment by an aluminum-based metal-organic framework with amido functionalized ligands

● A novel Al-MOF was successfully synthesized by a facile solvothermal method. ● Al-MOF showed superior performance for phosphate detection. ● High selectivity and anti-interference for detection were demonstrated. ● The high coordination between Al-O and PO₄³⁻ was the key in fluorescence sensing. The on-site monitoring of phosphate is important for environmental management. Conventional phosphate detection methods are not appropriate to on-site monitoring owing to the use of complicated detection procedures, and the consequent high cost and maintenance requirements of the detection apparatus. Here, a highly sensitive fluorescence-based method for phosphate detection with a wide detection range was developed based on a luminescent aluminum-based metal-organic framework (Al-MOF). The Al-MOF was prepared by introducing amine functional groups to conventional MIL to enhance phosphate binding, and exhibited excellent fluorescence properties that originated from the ligand-to-metal charge transfer (LMCT). The detection limit was as low as 3.25 μmol/L (0.10 mg/L) and the detection range was as wide as 3–350 μmol/L (0.10–10.85 mg/L). Moreover, Al-MOF displayed specific recognition toward phosphate over most anions and metal cations, even for a high concentration of the co-existent ions. The mechanism of phosphate detection was analyzed through the characterization of the combination of Al-MOF and phosphate, and the results indicated the high affinity between Al-O and phosphate inhibited that the LMCT process and recovered the intrinsic fluorescence of NH₂-H₂BDC. The recovery of the developed detection method reached a satisfactory range of 85.1%–111.0%, and the feasibility of on-site phosphate detection was verified using a prototype sensor for tap water and lake water samples. It was demonstrated that the prepared Al-MOF is highly promising for on-site detection of phosphate in an aqueous environment.     

Phylogenetic diversity of NO reductases,new tools for nor monitoring,and insights into N2O production in natural and engineered environments

● 548 representative nor genes were collected to create complete phylogenetic trees. ● The distribution of nor and nod genes were detected in 18 different phyla. ● The most conserved amino acids in NOR were located adjacent to the active site. ● nor-universal and Clade-specific primers were designed, suggested, and tested. Nitric oxide reductases (NORs) have a central role in denitrification, detoxification of nitric oxide (NO) in host-pathogen interactions, and NO-mediated cell-cell signaling. In this study, we focus on the phylogeny and detection of qNOR and cNOR genes because of their nucleotide sequence similarity and evolutionary relatedness to cytochrome oxidases, their key role in denitrification, and their abundance in natural, agricultural, and wastewater ecosystems. We also include nitric oxide dismutase (NOD) due to its similarity to qNOR. Using 548 nor sequences from publicly accessible databases and sequenced isolates from N₂O-producing bioreactors, we constructed phylogenetic trees for 289 qnor/nod genes and 259 cnorB genes. These trees contain evidence of horizontal gene transfer and gene duplication, with 13.4% of the sequenced strains containing two or more nor genes. By aligning amino acid sequences for qnor + cnor, qnor, and cnor, we identified four highly conserved regions for NOR and NOD, including two highly conserved histidine residues at the active site for qNOR and cNOR. Extending this approach, we identified conserved sequences for: 1) all nor (nor-universal); 2) all qnor (qnor-universal) and all cnor (cnor-universal); 3) qnor of Comamonadaceae; 4) Clade-specific sequences; and 5) nod of Candidatus Methylomirabilis oxyfera. Examples of primer performance were confirmed experimentally.     

Biodegradation of waste refrigerator polyurethane by mealworms

● Waste refrigerator polyurethane (WRPU) was ingested and biodegraded by mealworms. ● The carbon in WRPU-based frass was lower than that in WRPU. ● Urethane groups in WRPU were broken down after ingestion by mealworms. ● Thermal stability of WRPU-based frass were deteriorated compared to that of WRPU. ● Gut microbiomes of mealworms fed using WRPU were distinct from that fed using bran. Refrigerator insulation replacement results in discarding a large amount of waste refrigerator polyurethane (WRPU). Insect larvae like mealworms have been used to biodegrade pristine plastics. However, knowledge about mealworms degrading WRPU is scarce. This study presents an in-depth investigation of the degradation of WRPU by mealworms using the micro-morphology, composition, and functional groups of WRPU and the egested frass characteristics. It was found that the WRPU debris in frass was scoured, implying that WRPU was ingested and degraded by mealworms. The carbon content of WRPU-based frass was lower than that of WRPU, indicating that mealworms utilized WRPU as a carbon source. The urethane groups in WRPU were broken, and benzene rings’ C=C and C–H bonds in the isocyanate disappeared after being ingested by mealworms. Thermal gravimetric-differential thermal gravimetry analysis showed that the weight loss temperature of WRPU-based frass was 300 °C lower than that of WRPU, indicating that the thermal stability of WRPU deteriorated after being ingested. The carbon balance analysis confirmed that carbon in the ingested WRPU released as CO₂ increased from 18.84 % to 29.80 %, suggesting that WRPU was partially mineralized. The carbon in the mealworm biomass ingesting WRPU decreased. The possible reason is that WRPU does not supply sufficient nutrients for mealworm growth, and the impurities and odor present in WRPU affect the appetite of the mealworms. The microbial community analysis indicated that WRPU exerts a considerable effect on the gut microorganism of mealworms. These findings confirm that mealworms degrade WRPU.