Unveiling the interaction mechanisms of key functional microorganisms in the partial denitrification-anammox process induced by COD

● The availability of PD-anammox was investigated with higher NO₃^––N concentration. ● NO₃^––N concentration affects NO₃^––N accumulation during denitrification. ● COD concentration is determinant for N removal pathways in PD-anammox process. ● The synergy/competition mechanisms between denitrifiers and anammox was explored. Partial denitrification-anammox (PD-anammox) is an innovative process to remove nitrate (NO₃^––N) and ammonia (NH₄⁺–N) simultaneously from wastewater. Stable operation of the PD-anammox process relies on the synergy and competition between anammox bacteria and denitrifiers. However, the mechanism of metabolic between the functional bacteria in the PD-anammox system remains unclear, especially in the treatment of high-strength wastewater. The kinetics of nitrite (NO₂^––N) accumulation during denitrification was investigated using the Michaelis-Menten equation, and it was found that low concentrations of NO₃^––N had a more significant effect on the accumulation of NO₂^––N during denitrification. Organic matter was a key factor to regulate the synergy of anammox and denitrification, and altered the nitrogen removal pathways. The competition for NO₂^––N caused by high COD concentration was a crucial factor that affecting the system stability. Illumina sequencing techniques demonstrated that excess organic matter promoted the relative abundance of the Denitratesoma genus and the nitrite reductase gene nirS, causing the denitrifying bacteria Denitratisoma to compete with Cadidatus Kuenenia for NO₂^––N, thereby affecting the stability of the system. Synergistic carbon and nitrogen removal between partial denitrifiers and anammox bacteria can be effectively achieved by controlling the COD and COD/NO₃^––N.     

Tank-dependence of the functionality and network differentiation of activated sludge community in a full-scale anaerobic/anoxic/aerobic municipal sewage treatment plant

● Environmental parameters affected functional bacteria and network associations. ● The structure and interactions of AS networks changed greatly within tanks. ● Anoxic co-occurrence network was more unstable and easily influenced. ● Composition of functional bacteria had a seasonal succession pattern. ● Tetrasphaera was the major PAO in spring and winter leading a better P removal. Understanding the structures and dynamics of bacterial communities in activated sludge (AS) in full-scale wastewater treatment plants (WWTPs) is of both engineering and ecological significance. Previous investigations have mainly focused on the AS communities of WWTP aeration tanks, and the differences and interactions between the communities in anaerobic and anoxic tanks of the AS system remain poorly understood. Here, we investigated the structures of bacterial communities and their inter-connections in three tanks (anaerobic, anoxic, and aerobic) and influent from a full-scale WWTP with conventional anaerobic/anoxic/aerobic (A/A/O) process over a year to explore their functionality and network differentiation. High-throughput sequencing showed that community compositions did not differ appreciably between the different tanks, likely due to the continuous sludge community interchange between tanks. However, network analysis showed significant differences in inter-species relationships, OTU topological roles, and keystone populations in the different AS communities. Moreover, the anoxic network is expected to be more unstable and easily affected by environmental disturbance. Tank-associated environmental factors, including dissolved oxygen, pH, and nutrients, were found to affect the relative abundance of functional genera (i.e., AOB, NOB, PAOs, and denitrifiers), suggesting that these groups were more susceptible to environmental variables than other bacteria. Therefore, this work could assist in improving our understanding of tank-associated microbial ecology, particularly the response of functional bacteria to seasonal variations in WWTPs employing A/A/O process.     

Microplastics in municipal wastewater treatment plants: a case study of Denizli/Turkey

● High amounts of microplastics are released to receiving media from WWTPs. ● The effect of classical treatment processes on MP removal is important. ● MP load in the effluent of WWTPs is important for developing treatment technology. ● Additional physical treatment could help further reduce MP discharge. Plastic particles smaller than 5 mm are microplastics. They are among the significant pollutants that recently attracted attention. Great quantities of microplastics enter the sewage system daily and reach wastewater treatment plants (WWTPs). As a result, WWTPs are potential microplastic sources. Hence, they create a pathway for microplastics to reach aquatic environments with treated wastewater discharge. Studies on microplastic characterization in WWTPs have gained momentum in academia. This study investigates the abundance, size, shape, color, polymer type, and removal efficiencies of microplastics in a municipal wastewater treatment plant (WWTP) in Denizli/Turkey. The results showed that the dominant microplastic shape in wastewater samples was fibers (41.78%–60.77%) in the 100–500 µm (58.57%–80.07%) size range. Most of the microplastics were transparent-white (32.86%–58.93%). The dominant polymer types were polyethylene (54.05%) and polyethylene vinyl acetate (37.84%) in raw wastewater. Furthermore, the microplastic removal efficiencies of the Denizli Central WWTP as a whole and for individual treatment units were evaluated. Although the microplastic pollution removal efficiency of the Denizli Central WWTP was over 95%, the microplastic concentration discharged daily into the receiving environment was considerably high (1.28 × 10¹⁰ MP/d). Thus, Denizli Central WWTP effluents result in a high volume of emissions in terms of microplastic pollution with a significant daily discharge to the Çürüksu Stream.     

Mitigating microbiological risks of potential pathogens carrying antibiotic resistance genes and virulence factors in receiving rivers: Benefits of wastewater treatment plant upgrade

● Abundance of MAGs carrying ARG-VF pairs unchanged in rivers after WWTP upgrade. ● Upgrade of WWTPs significantly reduced diversity of pathogenic genera in rivers. ● Upgrade of WWTPs reduced most VF (ARG) types carried by potential pathogens in rivers. ● Upgrade of WWTPs narrowed the pathogenic host ranges of ARGs and VFs in rivers. Wastewater treatment plants (WWTPs) with additional tertiary ultrafiltration membranes and ozonation treatment can improve water quality in receiving rivers. However, the impacts of WWTP upgrade (WWTP-UP) on pathogens carrying antibiotic resistance genes (ARGs) and virulence factors (VFs) in rivers remain poorly understood. In this study, ARGs, VFs, and their pathogenic hosts were investigated in three rivers impacted by large-scale WWTP-UP. A five-year sampling campaign covered the periods before and after WWTP-UP. Results showed that the abundance of total metagenome-assembled genomes (MAGs) containing both ARGs and VFs in receiving rivers did not decrease substantially after WWTP-UP, but the abundance of MAGs belonging to pathogenic genera that contain both ARGs and VFs (abbreviated as PAVs) declined markedly. Genome-resolved metagenomics further revealed that WWTP-UP not only reduced most types of VFs and ARGs in PAVs, but also effectively eliminated efflux pump and nutritional VFs carried by PAVs in receiving rivers. WWTP-UP narrowed the pathogenic host ranges of ARGs and VFs and mitigated the co-occurrence of ARGs and VFs in receiving rivers. These findings underline the importance of WWTP-UP for the alleviation of pathogens containing both ARGs and VFs in receiving rivers.     

Photosensitivity sources of dissolved organic matter from wastewater treatment plants and their mediation effect on 17α-ethinylestradiol photodegradation

● EE2 photodegradation behavior in the presence of four WWTPs’ DOM was explored. ● The ³DOM* played a major role in the EE2 photodegradation mediated by WWTPs’ DOM. ● The A²/O process DOM contained more aromatic and oxygen-containing substances. ● Possible photosensitivity sources of DOM in the A²/O process were proposed. Dissolved organic matter (DOM) from each treatment process of wastewater treatment plants (WWTPs) contains abundant photosensitive substances, which could significantly affect the photodegradation of 17α-ethinylestradiol (EE2). Nevertheless, information about EE2 photodegradation behavior mediated by DOM from diverse WWTPs and the photosensitivity sources of such DOM are inadequate. This study explored the photodegradation behavior of EE2 mediated by four typical WWTPs’ DOM solutions and investigated the photosensitivity sources of DOM in the anaerobic-anoxic-oxic (A²/O) process. The parallel factor analysis identified three varying fluorescing components of these DOM, tryptophan-like substances or protein-like substances, microbial humus-like substances, and humic-like components. The photodegradation rate constants of EE2 were positively associated with the humification degree of DOM (P < 0.05). The triplet state substances were responsible for the degradation of EE2. DOM extracted from the A²/O process, especially in the secondary treatment process had the fastest EE2 photodegradation rate compared to that of the other three processes. Four types of components (water-soluble organic matter (WSOM), extracellular polymeric substance, humic acid, and fulvic acid) were separated from the A²/O process DOM. WSOM had the highest promotion effect on EE2 photodegradation. Fulvic acid-like components and humic acid-like organic compounds in WSOM were speculated to be important photosensitivity substances that can generate triplet state substances. This research explored the physicochemical properties and photosensitive sources of DOM in WWTPs, and explained the fate of estrogens photodegradation in natural waters.     

Fluorescence detection of phosphate in an aqueous environment by an aluminum-based metal-organic framework with amido functionalized ligands

● A novel Al-MOF was successfully synthesized by a facile solvothermal method. ● Al-MOF showed superior performance for phosphate detection. ● High selectivity and anti-interference for detection were demonstrated. ● The high coordination between Al-O and PO₄³⁻ was the key in fluorescence sensing. The on-site monitoring of phosphate is important for environmental management. Conventional phosphate detection methods are not appropriate to on-site monitoring owing to the use of complicated detection procedures, and the consequent high cost and maintenance requirements of the detection apparatus. Here, a highly sensitive fluorescence-based method for phosphate detection with a wide detection range was developed based on a luminescent aluminum-based metal-organic framework (Al-MOF). The Al-MOF was prepared by introducing amine functional groups to conventional MIL to enhance phosphate binding, and exhibited excellent fluorescence properties that originated from the ligand-to-metal charge transfer (LMCT). The detection limit was as low as 3.25 μmol/L (0.10 mg/L) and the detection range was as wide as 3–350 μmol/L (0.10–10.85 mg/L). Moreover, Al-MOF displayed specific recognition toward phosphate over most anions and metal cations, even for a high concentration of the co-existent ions. The mechanism of phosphate detection was analyzed through the characterization of the combination of Al-MOF and phosphate, and the results indicated the high affinity between Al-O and phosphate inhibited that the LMCT process and recovered the intrinsic fluorescence of NH₂-H₂BDC. The recovery of the developed detection method reached a satisfactory range of 85.1%–111.0%, and the feasibility of on-site phosphate detection was verified using a prototype sensor for tap water and lake water samples. It was demonstrated that the prepared Al-MOF is highly promising for on-site detection of phosphate in an aqueous environment.     

Electrocatalytic reduction of nitrate using Pd-Cu modified carbon nanotube membranes

● Pd-Cu modified CNT membranes were prepared successfully by electrodeposition method. ● The deposition voltage and deposition time were optimized for Pd-Cu co-deposition. ● NO₃⁻-N was removed efficiently from water by Pd-Cu modified CNT membranes. ● The presence of dissolved oxygen did not affect the nitrate reduction performance. ● Mass transfer rate was promoted significantly with the increase in membrane flux. Excessive nitrate in water is harmful to the ecological environment and human health. Electrocatalytic reduction is a promising technology for nitrate removal. Herein, a Pd-Cu modified carbon nanotube membrane was fabricated with an electrodeposition method and used to reduce nitrate in a flow-through electrochemical reactor. The optimal potential and duration for codeposition of Pd and Cu were −0.7 V and 5 min, respectively, according to linear scan voltammetry results. The membrane obtained with a Pd:Cu ratio of 1:1 exhibited a relatively high nitrate removal efficiency and N₂ selectivity. Nitrate was almost completely reduced (~99 %) by the membrane at potentials lower than −1.2 V. However, −0.8 V was the optimal potential for nitrate reduction in terms of both nitrate removal efficiency and product selectivity. The nitrate removal efficiency was 56.2 %, and the N₂ selectivity was 23.8 % for the Pd:Cu=1:1 membrane operated at −0.8 V. Nitrate removal was enhanced under acidic conditions, while N₂ selectivity was decreased. The concentrations of Cl⁻ ions and dissolved oxygen showed little effect on nitrate reduction. The mass transfer rate constant was greatly improved by 6.6 times from 1.14 × 10⁻³ m/h at a membrane flux of 1 L/(m²·h) to 8.71 × 10⁻³ m/h at a membrane flux of 15 L/(m²·h), which resulted in a significant increase in the nitrate removal rate from 13.6 to 133.5 mg/(m²·h). These findings show that the Pd-Cu modified CNT membrane is an efficient material for nitrate reduction.     

Evaluation of activated sludge properties’ changes in industrial-wastewater pre-treatment: role of residual aluminum hydrolyzed species with different polymerization degree

● Medium poly Al salts dominated the PAC residual salts with a rational dosage. ● Settlement flocculation effect under medium poly Al salts showed a better trend. ● Complex of medium poly Al salts and enzymes promoted cell activity. ● Medium poly Al salts were beneficial to the effluent indexes. With the widespread introduction of pre-coagulation prior to the biological unit in various industrial wastewater treatments, it is noteworthy that long-term accumulation of residual coagulants has certains effect on both micro and macro characteristics of activated sludge (AS). In this study, the morphology distributions of residual aluminum salts (RAS) and their effects on the removal efficiency of AS were investigated under different PAC concentrations. The results showed that the dominance of medium polymeric RAS, formed under an appropriate PAC dose of 20 mg/L enhanced the hydrophobicity, flocculation, and sedimentation performances of AS, as well as the enzymatic activity in cells in the sludge system, improving the main pollutants removal efficiency of the treatment system. Comparatively the species composition with monomer and dimer / high polymer RAS as the overwhelming parts under an over-dosed PAC concentration of 55 mg/L resulted in excessive secretion of EPS with loose flocs structure and conspicuous inhibition of cellular activity, leading to the deterioration of physico-chemical and biological properties of AS. Based on these findings, this study can shed light on the role of the RAS hydrolyzed species distributions, closely relevant to Al dosage, in affecting the comprehensive properties of AS and provide a theoretical reference for coagulants dosage precise control in the pretreatment of industrial wastewater.     

Revealing the GHG reduction potential of emerging biomass-based CO2 utilization with an iron cycle system

● Greenhouse gas mitigation by biomass-based CO₂ utilization with a Fe cycle system. ● The system including hydrothermal CO₂ reduction with Fe and Fe recovery by biomass. ● The reduction potential quantified by experiments, simulations, and an ex-ante LCA. ● The greatest GHG reduction potential is −34.03 kg CO₂-eq/kg absorbed CO₂. ● Ex-ante LCA supports process optimization to maximize GHG reduction potential. CO₂ utilization becomes a promising solution for reducing anthropogenic greenhouse gas (GHG) emissions. Biomass-based CO₂ utilization (BCU) even has the potential to generate negative emissions, but the corresponding quantitative evaluation is limited. Herein, the biomass-based CO₂ utilization with an iron cycle (BCU-Fe) system, which converts CO₂ into formate by Fe under hydrothermal conditions and recovers Fe with biomass-derived glycerin, was investigated. The GHG reduction potential under various process designs was quantified by a multidisciplinary method, including experiments, simulations, and an ex-ante life-cycle assessment. The results reveal that the BCU-Fe system could bring considerable GHG emission reduction. Significantly, the lowest value is −34.03 kg CO₂-eq/kg absorbed CO₂ (−2.44 kg CO₂-eq/kg circulated Fe) with the optimal yield of formate (66%) and Fe (80%). The proposed ex-ante evaluation approach not only reveals the benefits of mitigating climate change by applying the BCU-Fe system, but also serves as a generic tool to guide the industrialization of emerging carbon-neutral technologies.     

Effectiveness of tertiary treatment processes in removing different classes of emerging contaminants from domestic wastewater

● Different advanced treatment processes were tested for ECs removal from wastewater. ● UV radiation showed low to moderate removal for 5 of the 38 micropollutants. ● Among tested membrane processes, nanofiltration showed the better performance. ● The use of PAC achieved high or partially removal for 31 out of the 38 compounds. ● The environmental and economical evaluation of a pilot-scale PAC unit is suggested. In this work, 38 different organic emerging contaminants (ECs), belonging to various chemical classes such as pharmaceuticals (PhCs), endocrine-disrupting chemicals (EDCs), benzotriazoles (BTRs), benzothiazoles (BTHs), and perfluorinated compounds (PFCs), were initially identified and quantified in the biologically treated wastewater collected from Athens’ (Greece) Sewage Treatment Plant (STP). Processes already used in existing STPs such as microfiltration (MF), nanofiltration (NF), ultrafiltration (UF), UV radiation, and powdered activated carbon (PAC) were assessed for ECs’ removal, under the conditions that represent their actual application for disinfection or advanced wastewater treatment. The results indicated that MF removed only one out of the 38 ECs and hence it was selected as pretreatment step for the other processes. UV radiation in the studied conditions showed low to moderate removal for 5 out of the 38 ECs. NF showed better results than UF due to the smaller pore sizes of the filtration system. However, this enhancement was observed mainly for 8 compounds originating from the classes of PhCs and PFCs, while the removal of EDCs was not statistically significant. Among the various studied technologies, PAC stands out due to its capability to sufficiently remove most ECs. In particular, removal rates higher than 70% were observed for 9 compounds, 22 were partially removed, while 7 demonstrated low removal rates. Based on our screening experiments, future research should focus on scaling-up PAC in actual conditions, combining PAC with other processes, and conduct a complete economic and environmental assessment of the treatment.     

Recent advances in electrochemical decontamination of perfluorinated compounds from water: a review

● Recent advances in the electrochemical decontamination of PFAS are reviewed. ● Underlying mechanisms and impacting factors of these processes are discussed. ● Several novel couped systems and electrode materials are emphasized. ● Major knowledge gaps and research prospects on PFAS removal are identified. Per- and polyfluoroalkyl substances (PFAS) pose serious human health and environmental risks due to their persistence and toxicity. Among the available PFAS remediation options, the electrochemical approach is promising with better control. In this review, recent advances in the decontamination of PFAS from water using several state-of-the-art electrochemical strategies, including electro-oxidation, electro-adsorption, and electro-coagulation, were systematically reviewed. We aimed to elucidate their design principles, underlying working mechanisms, and the effects of operation factors (e.g., solution pH, applied voltage, and reactor configuration). The recent developments of innovative electrochemical systems and novel electrode materials were highlighted. In addition, the development of coupled processes that could overcome the shortcomings of low efficiency and high energy consumption of conventional electrochemical systems was also emphasized. This review identified several major knowledge gaps and challenges in the scalability and adaptability of efficient electrochemical systems for PFAS remediation. Materials science and system design developments are forging a path toward sustainable treatment of PFAS-contaminated water through electrochemical technologies.     

Preliminary techno-economic analysis of three typical decentralized composting technologies treating rural kitchen waste: a case study in China

● Decentralized composting (DC) is a profitable KW treating technology. ● SAC and BEC were economically attractive in rural area, while HDC was unprofitable. ● KW handling subsidy plays a vital role in making DC profitable. ● SAC and BEC have great potential in promoting rural KW treatment. This study was designed to evaluate whether the decentralized rural kitchen waste (KW) composting technologies used in China can be widely applied. To this end, we completed a techno-economic analysis of three typical types of KW compositing, namely solar-assisted (SAC), bio-enhanced (BEC), and heat-dewatering composting (HDC). These evaluations revealed that all three technologies produce composting products that meet China’s organic fertilizer standard and that both SAC and BEC are economically self-sustaining and generate net profits (18824.94 and 17791.52 US$/a) and positive net present values (32133.11 and 25035.93 US$). Subsequent sensitivity analysis demonstrated that the KW-handling subsidy plays a critical role in making decentralized composting economically attractive. Based on these analyses, we believe that reducing the coverage area of SAC, reducing the operating cost of BEC and HDC, upgrading composting products, and strengthening secondary pollution control would aid in supporting the technological improvement of these processes. Moreover, providing appropriate subsidies and promulgating specific standards and policies for KW fertilizer are key strategies for decentralized rural KW composting management.     

NiB2O4 (B = Mn or Co) catalysts for NH3-SCR of NOx at low-temperature in microwave field

● Microwave-assisted catalytic NH₃-SCR reaction over spinel oxides is carried out. ● SCR reaction temperature is tremendously lowered in microwave field. ● NO conversion of NiMn₂O₄ is highly up to 90.6% at 70°C under microwave heating. Microwave-assisted selective catalytic reduction of nitrogen oxides (NO_x) was investigated over Ni-based metal oxides. The NiMn₂O₄ and NiCo₂O₄ catalysts were synthesized by the co-precipitation method and their activities were evaluated as potential candidate catalysts for low-temperature NH₃-SCR in a microwave field. The physicochemical properties and structures of the catalysts were characterized by X-ray diffraction (XRD), Scanning electron microscope (SEM), N₂-physisorption, NO adsorption-desorption in the microwave field, H₂-temperature programmed reduction (H₂-TPR) and NH₃-temperature programmed desorption (NH₃-TPD). The results verified that microwave radiation reduced the reaction temperature required for NH₃-SCR compared to conventional heating, which needed less energy. For the NiMn₂O₄ catalyst, the catalytic efficiency exceeded 90% at 70 °C and reached 96.8% at 110 °C in the microwave field. Meanwhile, the NiMn₂O₄ also exhibited excellent low-temperature NH₃-SCR reaction performance under conventional heating conditions, which is due to the high BET specific surface area, more suitable redox property, good NO adsorption-desorption in the microwave field and rich acidic sites.     

Phylogenetic diversity of NO reductases,new tools for nor monitoring,and insights into N2O production in natural and engineered environments

● 548 representative nor genes were collected to create complete phylogenetic trees. ● The distribution of nor and nod genes were detected in 18 different phyla. ● The most conserved amino acids in NOR were located adjacent to the active site. ● nor-universal and Clade-specific primers were designed, suggested, and tested. Nitric oxide reductases (NORs) have a central role in denitrification, detoxification of nitric oxide (NO) in host-pathogen interactions, and NO-mediated cell-cell signaling. In this study, we focus on the phylogeny and detection of qNOR and cNOR genes because of their nucleotide sequence similarity and evolutionary relatedness to cytochrome oxidases, their key role in denitrification, and their abundance in natural, agricultural, and wastewater ecosystems. We also include nitric oxide dismutase (NOD) due to its similarity to qNOR. Using 548 nor sequences from publicly accessible databases and sequenced isolates from N₂O-producing bioreactors, we constructed phylogenetic trees for 289 qnor/nod genes and 259 cnorB genes. These trees contain evidence of horizontal gene transfer and gene duplication, with 13.4% of the sequenced strains containing two or more nor genes. By aligning amino acid sequences for qnor + cnor, qnor, and cnor, we identified four highly conserved regions for NOR and NOD, including two highly conserved histidine residues at the active site for qNOR and cNOR. Extending this approach, we identified conserved sequences for: 1) all nor (nor-universal); 2) all qnor (qnor-universal) and all cnor (cnor-universal); 3) qnor of Comamonadaceae; 4) Clade-specific sequences; and 5) nod of Candidatus Methylomirabilis oxyfera. Examples of primer performance were confirmed experimentally.     

Tailoring the simultaneous abatement of methanol and NOx on Sb-Ce-Zr catalysts via copper modification

● Cu addition enhances CH₃OH oxidation and alleviates its inhibitory effect on SCR. ● Cu addition improves the activation of SCR reactants in the presence of methanol. ● Damaged structure by more Cu addition decreases specific surface area and acidity. ● Excessive Cu addition would lead to the narrowing of SCR temperature window. Simultaneously removal of NO_x and VOCs over NH₃-SCR catalysts have attracted lots of attention recently. However, the presence of VOCs would have negative effect on deNO_x efficiency especially at low temperature. In this study, copper modification onto Sb_0.5CeZr₂O_x (SCZ) catalyst were performed to enhance the catalytic performance for simultaneous control of NO_x and methanol. It was obtained that copper addition could improve the low-temperature activity of both NO_x conversion and methanol oxidation, where the optimal catalyst (Cu_0.05SCZ) exhibited a deNO_x activity of 96% and a mineralization rate of 97% at 250 °C, which are around 10% higher than that of Cu free sample. The characterization results showed that copper addition could obviously enhance the redox capacity of the catalysts. As such, the inhibition effect of methanol incomplete oxidation on NO adsorption and NH₃ activation were then lessened and the conversion of surface formamide species were also accelerated, resulting in the rising of NO_x conversion at low temperature. However, excessive copper addition would damage the Sb-Ce-Zr oxides solid solution structure owing to Cu-Ce strong interactions, decreasing the surface area and acidity. Meanwhile, due to easier over-oxidation of NH₃ with more Cu addition, the temperature window for NO_x conversion would become quite narrow. These findings could provide useful guidelines for the synergistic removal of VOCs over SCR catalyst in real application.     

Nonpolar cross-stacked super-aligned carbon nanotube membrane for efficient wastewater treatment

● A novel nonpolar super-aligned carbon nanotube (SACNT) membrane was prepared. ● SACNT membranes achieved smoother and more uniform structures. ● SACNT membranes have inert chemistry and unique nonpolar wetting feature. ● SACNT membranes exhibit superior separation and antifouling capabilities. ● SACNT membranes achieved superior oil/water separation efficiency. Membrane separation technology has made great progress in various practical applications, but the unsatisfactory separation performance of prevailing membrane materials hampers its further sustainable growth. This study proposed a novel nonpolar super-aligned carbon nanotube (SACNT) membrane, which was prepared with a layer-by-layer cross-stacking method. Through controlling the number of stacked SACNT layers, three kinds of SACNT membranes (SACNT_200, SACNT_300, and SACNT_400) were prepared. Systematic characterizations and filtration tests were performed to investigate their physico-chemical properties, surface wetting behavior, and filtration performance. Compared with two commercial membranes (Com_0.22 and Com_0.45), all the SACNT membranes achieved smoother and more uniform structures. Due to the hexagonal graphene structure of CNTs, the surface chemistry of the SACNT membranes is simple and inert, thereby potentially eliminating the covalent-bonding-induced membrane fouling. Besides, the SACNT membranes exhibited a typical nonpolar wetting behavior, with high contact angles for polar liquids (water: ~124.9°–126.5°; formamide: ~80.0°–83.9°) but low contact angles for nonpolar diiodomethane (~18.8°–20.9°). This unique nonpolar feature potentially leads to weak interactions with polar substances. Furthermore, compared with the commercial membranes, the SACNT membranes obtained a significantly higher selectivity while achieving a comparable or higher permeability (depending on the number of stacked layers). Moreover, the SACNT membranes exhibited superior separation performance in various application scenarios, including municipal wastewater treatment (> 2.3 times higher cleaning efficiency), electro-assistant fouling inhibition (or even self-cleaning), and oil/water separation (> 99.2 % of separation efficiency), suggesting promising application prospects in various fields.     

Electroconductive RGO-MXene membranes with wettability-regulated channels: improved water permeability and electro-enhanced rejection performance

● Electroconductive RGO-MXene membranes were fabricated. ● Wettable membrane channels were established between RGO and MXene nanosheets. ● Hydrophilic MXene reduces the resistance of water entering the membrane channels. ● Water permeance of RGO-MXene membrane is 16.8 times higher than that of RGO membrane. ● Electro-assistance can enhance the dye rejection performance of RGO-MXene membrane. Reduced graphene oxide (RGO) membranes are theoretically more conducive to the rapid transport of water molecules in their channels compared with graphene oxide (GO) membranes, as they have fewer oxygen-containing functional groups and more non-oxidized regions. However, the weak hydrophilicity of RGO membranes inhibits water entry into their channels, resulting in their low water permeability. In this work, we constructed wettable RGO-MXene channels by intercalating hydrophilic MXene nanosheets into the RGO membrane for improving the water permeance. The RGO-MXene composite membrane exhibits high pure water permeance of 62.1 L/(m²·h·bar), approximately 16.8 times that of the RGO membrane (3.7 L/(m²·h·bar)). Wettability test results and molecular dynamics simulations suggest that the improved water permeance results from the enhanced wettability of RGO-MXene membrane and increased rate of water molecules entering the RGO-MXene channels. Benefiting from good conductivity, the RGO-MXene membrane with electro-assistance exhibits significantly increased rejection rates for negatively charged dyes (from 56.0% at 0 V to 91.4% at 2.0 V for Orange G) without decreasing the permeate flux, which could be attributed to enhanced electrostatic repulsion under electro-assistance.     

Influence of H2S and NH3 on biogas dry reforming using Ni catalyst: a study on single and synergetic effect

● NH₃ in biogas had a slight inhibitory effect on dry reforming. ● Coexistence of H₂S and NH₃ led to faster decline of biogas conversion. ● Regeneration was effective for catalysts deactivated under synergetic effect. Biogas is a renewable biomass energy source mainly composed of CH₄ and CO₂. Dry reforming is a promising technology for the high-value utilization of biogas. Some impurity gases in biogas can not be completely removed after pretreatment, which may affect the performance of dry reforming. In this study, the influence of typical impurities H₂S and NH₃ on dry reforming was studied using Ni/MgO catalyst. The results showed that low concentration of H₂S in biogas could cause serious deactivation of catalyst. Characterization results including EDS, XPS and TOF-SIMS confirmed the adsorption of sulfur on the catalyst surface, which was the cause of catalyst poisoning. We used air calcination method to regenerate the sulfur-poisoned catalysts and found that the regeneration temperature higher than 500 °C could help catalyst recover the original activity. NH₃ in the concentration range of 50–10000 ppm showed a slight inhibitory effect on biogas dry reforming. The decline rate of biogas conversion efficiency increased with the increase of NH₃ concentration. This was related to the reduction of oxygen activity on catalyst surface caused by NH₃. The synergetic effect of H₂S and NH₃ in biogas was investigated. The results showed that biogas conversion decreased faster under the coexistence of H₂S and NH₃ than under the effect of H₂S alone, so as the surface oxygen activity of catalyst. Air calcination regeneration could also recover the activity of the deactivated catalyst under the synergetic effect of H₂S and NH₃.     

New insights into the formation of ammonium nitrate from a physical and chemical level perspective

● Factor analysis of ammonium nitrate formation based on thermodynamic theory. ● Aerosol liquid water content has important role on the ammonium nitrate formation. ● Contribution of coal combustion and vehicle exhaust is significant in haze periods. High levels of fine particulate matter (PM_2.5) is linked to poor air quality and premature deaths, so haze pollution deserves the attention of the world. As abundant inorganic components in PM_2.5, ammonium nitrate (NH₄NO₃) formation includes two processes, the diffusion process (molecule of ammonia and nitric acid move from gas phase to liquid phase) and the ionization process (subsequent dissociation to form ions). In this study, we discuss the impact of meteorological factors, emission sources, and gaseous precursors on NH₄NO₃ formation based on thermodynamic theory, and identify the dominant factors during clean periods and haze periods. Results show that aerosol liquid water content has a more significant effect on ammonium nitrate formation regardless of the severity of pollution. The dust source is dominant emission source in clean periods; while a combination of coal combustion and vehicle exhaust sources is more important in haze periods. And the control of ammonia emission is more effective in reducing the formation of ammonium nitrate. The findings of this work inform the design of effective strategies to control particulate matter pollution.