燃煤飞灰中痕量元素的研究

综述了煤中痕量元素的含量分布、煤燃烧过程中痕量元素的分布转化规律,总结了痕量元素在飞灰中的富集规律和赋存状态,以及痕量元素的释放控制方法和技术,并探讨了今后的研究方向.     

在线飞灰测碳仪在燃煤锅炉中的应用

介绍了在线飞灰测碳仪工作原理和系统结构,通过其在中石化某自备电厂燃煤锅炉的实际应用,说明了燃煤锅炉使用在线飞灰测碳仪后,锅炉司炉能随时掌握飞灰含碳量波动情况,及时调整风粉比,合理控制飞灰含碳量指标,从而降低了发电成本,提高了机组运行的经济性。     

锅炉电除尘器飞灰粒径分布特性试验研究

对５台锅炉４种型号的电除尘器进行飞灰粒径分布特性试验研究，结果表明：电除尘器飞灰粒径分布特性服从概率统计定义的分布函数，即威布尔分布。研究得出了电除尘器飞灰分布特性函数α和β数值及变化规律，电除尘器分级除尘效率特性参数ｎ和ｍ的数值及变化规律，所提供的试验数据可作为在役机组电除尘器改造，新建机组电除尘器选型的依据。     

吴淞工业区大气颗粒物中金属元素分布特征与富集规律

利用富集因子判断和评价上海吴淞地区大气总悬浮颗粒物金属元素的来源与分布。该地区来自工业污染源和汽车尾气排放Ｐｂ、Ｚｎ、Ｃａ和Ｍｎ等污染元素的富集程度较高,总悬浮颗粒物主要来源按其贡献的排序为：大气污染〉土壤源〉海盐源。     

矿山粉尘分布及扩散规律研究进展

对采矿粉尘分布及扩散规律的实验研究和数值模拟研究进展进行综述,研究表明实验结果与模拟结果基本一致,但是模拟可以给出更加详尽的粉尘浓度、分布和扩散规律数据,为有针对性地采取防尘措施、选择除尘技术提供科学的理论依据,并对今后的发展方向进行了展望。     

煤燃烧过程中微量元素铬、铅的迁移转化规律研究

通过化学逐级提取法等手段,研究了煤中铬、铅在燃烧过程中的迁移转化规律及其环境稳定性,掌握了其在燃烧产物中的形态和分布,为开展燃煤电厂灰渣中重金属污染的防治工作提供了依据。     

电厂燃煤过程中重金属污染及其控制技术研究

综述了燃煤重金属污染问题的严重性和污染途径，对燃煤重金属的种类和危害进行了论述，并重点阐述了国内外采取的控制措施，同时还指出了燃煤重金属污染研究中存在的问题及今后的研究方向。     

燃煤电厂烟气中汞控制技术研究

介绍了溶解法、吸附法、化学法和鳌合法等4种燃煤电厂烟气脱汞技术。从机理上分析了烟气脱汞技术的工艺过程,对脱汞技术的进一步开发和工业化进程具有促进作用。     

添加CaO对燃煤重金属元素富集效果的影响

选取CaO作为吸附剂,探究了不同燃烧温度下添加CaO对重金属元素在燃煤灰渣中富集效果的影响规律。实验结果表明:添加CaO对重金属元素Cr未起到富集作用,而对Mn,Ni,Cu,Zn,As,Cd,Pb 7种重金属元素的富集效果显著;随燃烧温度的升高,CaO对各赋存形态的Mn,Ni,Cu,Zn,As的富集效果先变好而后变差,对各赋存形态的Cd和Pb的富集效果越来越好;CaO添加比(预处理后的CaO颗粒与预处理后的原煤的质量比)越大,CaO对Mn,Ni,Cu,Zn,As,Cd,Pb的富集效果越好,燃烧温度为850℃时的最佳CaO添加比为4%。     

粉煤灰-粉煤灰合成沸石对Cs~+的固化

以电厂废弃物粉煤灰为原料、采用碱熔-水热法制备了粉煤灰合成A型沸石(以下简称沸石),再以沸石对溶液中的Cs+进行分离富集,最后在碱激发剂的作用下以粉煤灰和吸附后的沸石制得地聚合物固化体。对固化体的性能进行了评价,并探讨了固化机理。实验结果表明:在吸附温度25℃、初始Cs+质量浓度100 mg/L、固液比10.0 g/L的条件下,沸石对的Cs+的吸附率达98%,比粉煤灰提高了2倍以上;沸石掺量为20%~30%(w)时,固化体的抗压强度符合GB 14569.1—2011要求,固化体中Cs+的42 d浸出率和累计浸出分数均远优于GB 14569.1—2011限值,表现出优异的抗浸出性能。     

化学激发循环流化床粉煤灰的研究

利用扫描电镜、激光粒度分析、X-衍射分析等测试手段,对循环流化床粉煤灰的理化性质和微观结构进行分析。比较了5种激发剂对循环流化床粉煤灰的激发效果,结果表明Na2SiO3·9H2O的激发效果最好。     

粉煤灰综合利用研究进展

介绍了粉煤灰的物理化学性质。综述了粉煤灰在建材制造、建筑工程、道路工程、农业、废水处理和催化反应中的应用现状以厦未来的应用前景。     

粉煤灰中氨氮的测定方法研究

从浸提、干扰去除和显色3个方面对纳氏试剂分光光度法进行优化改进,建立了一种用于粉煤灰中氨氮测定的适宜方法,并利用浸提完全度和精密度实验对该方法了进行了评价。优化后的方法为:按固液比1∶10加入0.05 mol/L H_2SO_4振荡浸提30 min,再加入1.5 mL酒石酸钾钠溶液(500 g/L)和1.5 mL NaOH溶液(5 mol/L)去除金属离子干扰,最后加入1.5 mL纳氏试剂进行显色。粉煤灰浸提后残渣的蒸馏液中未检测出氨氮,说明浸提效果较为完全。同一样品的8次平行测定结果的相对标准偏差为6.10%,说明该方法稳定可靠。     

粉煤灰沸石分子筛负载氧化铈催化剂的制备及其催化燃烧二氯甲烷性能

以发电厂粉煤灰为原料,采用碱融水热法合成了HZSM-5分子筛(FHZSM-5),用浸渍法负载10％(w)CeO2制备了CeO2/FHZSM-5催化剂,用于二氯甲烷的催化燃烧.盐酸浓度为2 mol/L及粉煤灰和NaOH的质量比为1:1.2时制备的FHZSM-5纯度最高,结晶度最好,用其制备的CeO2/FHZSM-5催化剂...     

粉煤灰复合材料砖的研制

提出了在常温下以粉煤灰为主要原料，研制高强度复合材料的方法。探讨了物料的成分配比、混料、成型和干燥的过程参数，并确定了材料的各项性能指标。     

陡河电厂粉煤灰烧结砖生产工艺

结合陡河电厂粉煤灰用于烧结砖的实践，介绍了用粉煤灰生产烧结砖的工艺过程及应该注意的问题。     

Effect of unburned carbon on lead, zinc, and copper recovery from molten fly ash by chloride-induced volatilization

The present work focuses on investigation of the effective recovery of heavy metals from molten fly ash by applying chloride-induced volatilization. In particular, the effect of unburned carbon on the chloride-induced volatilization of lead, zinc, and copper from model and real molten fly ashes was investigated in the temperature range 873–1173 K under a N₂ atmosphere. As a result, almost 100% of lead and a significant proportion of zinc were volatilized from the real molten fly ash samples at 1173 K. In contrast, for the model fly ash, volatilization ratios of lead and zinc at 1173 K were only 85% and 25%, respectively. Further, the results of X-ray diffraction analysis suggested that PbO in molten fly ash was converted either to Pb₂OCl₂ or Pb by respective chlorination and reduction reactions. Meanwhile ZnO and CuO in the molten fly ash were reduced to Zn and Cu by reaction with unburned carbon. Subsequently, Pb, Zn, and Pb₂OCl₂ were volatilized, but Cu remained in the solid residue. Finally, the volatilization ratio of zinc increased with the addition of carbon, and more than 98% of zinc was volatilized at 1173 K from a fly ash with a carbon content of 20%.     

Thermal and hydrometallurgical recovery methods of heavy metals from municipal solid waste fly ash

Heavy metals in fly ash from municipal solid waste incinerators are present in high concentrations. Therefore fly ash must be treated as a hazardous material. On the other hand, it may be a potential source of heavy metals. Zinc, lead, cadmium, and copper can be relatively easily removed during the thermal treatment of fly ash, e.g. in the form of chlorides. In return, wet extraction methods could provide promising results for these elements including chromium and nickel. The aim of this study was to investigate and compare thermal and hydrometallurgical treatment of municipal solid waste fly ash. Thermal treatment of fly ash was performed in a rotary reactor at temperatures between 950 and 1050 °C and in a muffle oven at temperatures from 500 to 1200 °C. The removal more than 90% was reached by easy volatile heavy metals such as cadmium and lead and also by copper, however at higher temperature in the muffle oven. The alkaline (sodium hydroxide) and acid (sulphuric acid) leaching of the fly ash was carried out while the influence of temperature, time, concentration, and liquid/solid ratio were investigated. The combination of alkaline-acidic leaching enhanced the removal of, namely, zinc, chromium and nickel.