Trace Metals in Different Crop/Cultivation Systems in Greece

Typical soils in Greece are neutral or alkaline and frequently are lime-rich, conditions that favour the accumulation of trace elements. The traditional use of metal-based fungicides in orchards and vineyards may have led to the accumulation of trace metals. Concentrations of Fe, Cu, Mn, Zn (aqua regia digestion) and some other soil parameters were measured in organically and conventionally cultivated soils (0–30 cm) from vineyards, olive groves and citrus groves of varying ages, and in uncultivated soils. Many vineyards and olive groves are situated in hilly or mountainous areas with sloping ground or terraces in contrastto citrus, which is cultivated in lower lying areas. Due to the difficulty of access, these crops often are cultivated extensively in both systems. Trace metal concentrations were found to lie withinthe ranges expected for the predominant soil types. Cu concentrations were relatively high (>100 mg kg^-1) in a few samples, but were not correlated with the age of the cultivation. A two-way ANOVA analysis showed larger differences in the mean concentrations of Cu, Mn and Zn between different crops (p≤ 0.001 for Cu, p≤ 0.05 for Zn, and p≤ 0.1 for Mn) than between different cultivation systems (no significant differences). The crop by cultivation interaction was not statistically significant for any metal (p > 0.8). Strong correlations (p≤ 0.001) were found between Fe, Mn and Zn and both clay concentration and CEC, although these relationshipswere not uniform throughout the different crop and cultivation systems. Concentrations of Cu were related to clay concentrations only for vineyards and to CEC only for citrus. Correlations were not found with organic matter or pH.     

Characterisation of Malian and Belgian solid waste composts with respect to fertility and suitability for land application

Two composts, a Malian (C1) and a Belgian (C2), and a peat substrate (C3) were analyzed for their suitability for land application. The results revealed that the materials can be used in agriculture but only the application of the peat substrate may create N immobilization. Composts had higher P, Ca, and Mg contents and lower C and K contents and C/N ratio than the peat substrate. The available P extracted from the three materials ranged from 15% (for C2) to 48% (for C3) and available K from 36% (in the composts) to 48% (for C3) of the total elements respectively. The fractionation of Mn, Fe, Zn and Cu in operationally defined fractions (water soluble, exchangeable, complexed, organically bound and residual) allows an estimation of the availability of metals for uptake. For example, 16% of the total Mn in the composts (C1 and C2) and 22% in the peat substrate would be plant available. Available Fe in the three materials was less than 2%. Available Zn varied between 10 and 25%. The fractionation allowed an estimation of the potential for contamination of groundwater following the applications of composts to agricultural lands.     

Investigation of potentially toxic heavy metals in different organic wastes used to fertilize market garden crops

The benefits of using organic waste as fertilizer and soil amendment should be assessed together with the environmental impacts due to the possible presence of heavy metals (HMs). This study involved analysing major element and HM contents in raw and size-fractionated organic wastes (17 sewage sludges and composts) from developed and developing countries. The overall HM concentration pattern showed an asymmetric distribution due to the presence of some wastes with extremely high concentrations. HM concentrations were correlated with the size of cities or farms where the wastes had been produced, and HM were differentiated with respect to their origins (geogenic: Cr–Ni; anthropogenic agricultural and urban: Cu–Zn; anthropogenic urban: Cd–Pb). Size fractionation highlighted Cd, Cu, Zn and Pb accumulation in fine size fractions, while Cr and Ni were accumulated in the coarsest. HM associations with major elements revealed inorganic (Al, Fe, etc.) bearing phases for Cr and Ni, and sulfur or phosphorus species for Cd, Cu Pb and Zn.     

Biodegradability of Quaternized, Crosslinked Sugarcane Bagasse

Quaternized, crosslinked sugarcane bagasse can adsorb anionic dyes from textile wastewater. Disposal of dye-saturated adsorbent by composting or land application would require that modifications made to the bagasse do not interfere with its decomposition. The impact of quaternization and crosslinking on bagasse biodegradability was examined. Bagasse in varying states of modification was mixed with soil and monitored for carbon dioxide evolution for four weeks at 27°C. After subtracting the amount of carbon evolved from control soil samples, the net carbon evolved from the bagasse samples was determined and used as a measure of their extent of biodegradation. Biodegradability decreased in the order: bagasse (approx. 60% degraded after four weeks) > quaternized bagasse > quaternized, epichlorohydrin-crosslinked bagasse > quaternized, methylene-bis-acrylamide-crosslinked bagasse > epichlorohydrin-crosslinked bagasse (less than 5% degraded). Crosslinking severely impacted biodegration, probably by preventing the penetration of (hemi)cellulytic and lignolytic enzymes into the interior of the modified bagasse particles. It is concluded that the biodegradability of quaternized, crosslinked bagasse is too low for composting or land application.     

An assessment of municipal solid waste compost quality produced in different cities of India in the perspective of developing quality control indices

A study was conducted to investigate physico-chemical properties, fertilizing potential and heavy metal polluting potentials of municipal solid waste composts produced in 29 cities of the country. Results indicated that except a very few samples, all other samples have normal pH and EC. Organic matter as well as major nutrients N and P contents in MSW composts are generally low as compared to the composts prepared from rural wastes. Heavy metal contents in composts from bigger cities (>1 million population) were higher by about 86% for Zn, 155% for Cu, 194% for Cd, 105% for Pb, 43% for Ni and 132% for Cr as compared to those from smaller cities (<1 million population). Composts prepared from source separated biogenos wastes contained, on average, higher organic matter (by 57%), total N (by 77%) and total P (by 78%), but lower concentrations of heavy metals Zn (by 63%), Cu (by 78%), Cd (by 64%), Pb (by 84%), Ni (by 50%), and Cr (by 63%) as compared to those prepared from mixed wastes. Partial segregation at the site of composting did not improve quality of compost significantly in terms of fertilizing parameters and heavy metal contents. Majority of MSW composts did not conform to the quality control guideline of ‘The Fertilizer (Control) Order 1985’ in respect of total organic C, total P, total K as well as heavy metals Cu, Pb and Cr. In order to enable the relevant stakeholders to judge overall quality, a scheme has been proposed for the categorization of composts into different marketable classes (A, B, C, and D) and restricted use classes (RU-1, RU-2, and RU-3) on the basis their fertilizing potential and as well as potential for contaminating soil and food chain. Under the scheme, ‘Fertilizing index’ was calculated from the values of total organic C, N, P, K, C/N ratio and stability parameter, and ‘Clean index’ was calculated from the contents of heavy metals, taking the relative importance of each of the parameters into consideration. As per the scheme, majority of the compost samples did not belong to any classes and hence, have been found unsuitable for any kind of use. As per the regulatory limits of different countries, very few compost samples (prepared from source separated biogenos wastes) were found in marketable classes (A, B, C and D) and some samples (11–14) were found suitable only for some restricted use.     

Effects of Acid Rain on Competitive Releases of Cd, Cu, and Zn from Two Natural Soils and Two Contaminated Soils in Hunan, China

Leaching experiments of rebuilt soil columns with two simulated acid rain solutions (pH 4.6–3.8) were conducted for two natural soils and two artificial contaminated soils from Hunan, south-central China, to study effects of acid rain on competitive releases of soil Cd, Cu, and Zn. Distilled water was used in comparison. The results showed that the total releases were Zn>Cu>Cd for the natural soils and Cd>Zn≫Cu for the contaminated soils, which reflected sensitivity of these metals to acid rain. Leached with different acid rain, about 26–76% of external Cd and 11–68% external Zn were released, but more than 99% of external Cu was adsorbed by the soils, and therefore Cu had a different sorption and desorption pattern from Cd and Zn. Metal releases were obviously correlated with releases of TOC in the leachates, which could be described as an exponential equation. Compared with the natural soils, acid rain not only led to changes in total metal contents, but also in metal fraction distributions in the contaminated soils. More acidified soils had a lower sorption capacity to metals, mostly related to soil properties such as pH, organic matter, soil particles, adsorbed SO₄ ²⁻, exchangeable Al³⁺ and H⁺, and contents of Fe₂O₃ and Al₂O₃.     

Green Composites of Poly (Lactic Acid) and Sugarcane Bagasse Residues from Bio-refinery Processes

Twin-screw extrusion was used to prepare the composites consisting of PLA and three types of sugarcane bagasse residues (up to 30 wt%) derived from different steps of a biorefinery process. Each residue had different composition, particle size and surface reactivity due to chemical and biological (enzyme, microbes) treatments that the biomass was subjected to. The effects of different residue characteristics on properties, crystallization behaviors and morphologies of PLA composites were investigated. Besides, a small amount (2 wt%) of coupling agent, Desmodur^® VKS 20 (DVKS), was used to improve the interfacial bonding between PLA and bagasse residues. The results indicated that in the presence of 2 % DVKS, PLA composite with pretreated residue exhibited the maximum strength properties (98.94 % tensile strength and 93.91 % flexural strength of neat PLA), while PLA composite with fermentation residue exhibited the minimum strength properties (88.98 % tensile strength and 81.91 % flexural strength of neat PLA).     

Synthesis of Chitosan@activated Carbon Beads with Abundant Amino Groups for Capture of Cu(II) and Cd(II) from Aqueous Solutions

In this study, chitosan and bio-based activated carbon obtained from sugarcane bagasse biowaste were used for the synthesis of efficient sorbent for Cu(II) and Cd(II) ion via precipitation method. The prepared material was enriched with amino groups through grafting tetraethylenepentamine and tested for heavy metal remediation from water samples. The influence of pH was investigated showing optimum sorption at pH 6 for Cu(II) and Cd(II). Sorption tests, explained by means of the most common sorption models, evidenced that the best performances were reached pointing out the promising application of the prepared sorbent for water purification treatments: Uptake kinetics are relatively fast: the equilibrium was reached within 140 min; and the kinetic profiles were preferentially fitted by the pseudo-second order rate equation. Sorption isotherms are fitted by Langmuir equation. The sorbent showed high metal ion sorption capacity with negligible influence of ion strength. The maximum sorption capacities reached 3.44 and 2.38 mmol g^??1 for Cu(II) and Cd(II), respectively at 298 K. Thermodynamic parameters were evaluated through variation of temperature. The sorption is unfavorable at elevated temperatures. Metal ions were successfully desorbed using 1 M HNO₃ solution.     

Effects of washing with water on enzymatic saccharification and d-lactic acid production from steam-exploded sugarcane bagasse

This study investigated the production of d-lactic acid from unutilized sugarcane bagasse using steam explosion pretreatment. The optimal steam pressure for a steaming time of 5?min was determined. The steam-exploded sugarcane bagasse was hydrolyzed using cellulase (Meicelase) and then the hydrolyzate was subjected to fermentation substrate. By enzymatic saccharification using Meicelase, the highest recovery of glucose from raw bagasse, 73.7?%, was obtained at a steam pressure of 20?atm. For extracted residue with water after steam explosion, the glucose recovery increased up to 94.9?% at a steam pressure of 20?atm. These results showed that washing with water is effective in removing enzymatic reaction inhibitors. After steam pretreatment (steam pressure of 20?atm), d-lactic acid was produced by Lactobacillus delbrueckii NBRC 3534 from the enzymatic hydrolyzate of steam-exploded bagasse and washed residue. The conversion rate of d-lactic acid obtained from the glucose concentration was 66.6?% for the hydrolyzate of steam-exploded bagasse without washing with water and 90.0?% for that derived from the extracted residue with water after steam explosion. These results also demonstrated that the hydrolyzate of steam-exploded bagasse (without washing with water) contains fermentation inhibitors and washing with water can remove them.     

Effect of nine years of animal waste deposition on profile distribution of heavy metals in Abeokuta,south-western Nigeria and its implication for environmental quality

Uncontrolled deposition of waste from animal farms is a common practice in south-western Nigeria, and the presence of heavy metals in soil constitutes environmental and health hazards by polluting the soil, ground water, adjoining streams and rivers. The study investigated the profile distribution of Mn, Pb, Cd, Zn, Fe, Cu, Ni and Cr in some tropical Alfisols in south-western Nigeria after nine years disposal of animal wastes. The amount of these metals in the soil horizons was high enough to cause health and phytotoxic risks. All the metals except Zn and Cr increased down the profile, while Mn, Pb, Cd, Fe, Cu and Ni accumulated at 80–120 cm depth. The increment of these metals at this depth over the top soil were 26%, 143%, 72%, 47%, 328% for Mn, Pb, Cd, Cu and Ni, respectively. It thus, shows their mobility and the possibility of polluting ground water. The Mn content at the poultry and cattle waste sites increased by 127% and 25%, respectively over the control, while that of cattle and swine dump site for Cd content were 9.82 and 15.63 mg kg^?1, respectively. Lead content also increased by 8.52 and 5.25 mg kg^?1, respectively.There was the accumulation of Zn and Cu at the swine dump site while the cattle dump site had the highest amounts of nickel and chromium. The least amount of Fe was recorded at the swine waste dump site. The reduction in organic matter with depths together with the reduced pH might have favored the mobility of the metals. The ranking of pollution among the sites was poultry > swine > cattle > sheep and could be due to the type of ration fed, the vaccination programmes, sanitation programmes and other management practices.     

Contaminated land clean-up using composted wastes and impacts of VOCs on land

This paper describes experiments that demonstrate the effects and potential for remediation of a former steelworks site in Wales polluted with polycyclic aromatic hydrocarbons (PAHs) and volatile organic compounds (VOCs). Under field conditions, PAH-contaminated soil was composted in-vessel, with or without organic feedstocks, receiving forced aeration for 80 days followed by 4 months maturation. Treatments compared PAH removal in contaminated soil to contaminated soil mixed with three different organic waste mixes after composting and after composts were spread to land. After composting, PAH concentrations declined in all treatments, by up to 38%. Sixteen months after the composts were landspread and vegetation was established, only those containing contaminated soil with organic additions exhibited further PAH removal, by up to 29%. Composting resulted in a decline in the relative concentration of small PAHs, whereas the landspreading-vegetation phase saw a decline in the relative concentration of medium PAHs in two of the three composts exhibiting PAH removal. Under controlled glasshouse conditions, vegetated soil columns of differing depths were exposed to VOCs from beneath. VOC vapour affected both shoot and root growth and soil microbial activity; effects varied with distance from the VOC source. This work demonstrated that on-site remediation of aged PAH-contaminated land can be successfully initiated by in-vessel co-composting followed by land spreading and vegetation, within a practical timeframe.     

Changes in organic matter composition during composting of two digested sewage sludges

Changes in the chemical and chemical-structural composition of the organic matter of two different sewage sludges (aerobic and anaerobic) mixed with sawdust (1:1 and 1:3, v/v) during composting were determined by monitoring chemical and microbiological parameters as well as by pyrolysis-gas chromatography. Composting was carried out in periodically turned outdoor piles, which were sampled for analysis 1, 30, 60 and 90 days after the beginning of the composting process. Both volatile organic matter and the water soluble C fraction decreased during composting, indicating that the more labile C fractions are mineralized during the process. Microbial activity as measured by microbial respiration (CO(2) evolved from compost samples during incubation) also decreased with composting, reflecting the more stable character of the resulting compost. No major differences were observed between the four composts studied as regards their chemical-structural characteristics. The acetonitrile, acetic acid and phenol pyrolytic fragment tended to increase with composting. Although the final composts were more aromatic in nature than the starting materials, a low degree of humification was observed in all four composts studied, as determined by their high proportion of polysaccharides and alkyl compounds. For this reason, the relationship between pyrolytic fragments, such as benzene/toluene or benzene+toluene/pyrrol+phenols, which are used as indices of humification for soil organic matter, are not of use for such poorly evolved sludge composts; instead, ratios that involve carbohydrate derivatives and aromatic compounds, such as furfural+acetic/benzene+toluene or acetic/toluene, are more sensitive indices for reflecting the transformations of these materials during composting. Both the chemical and microbiological parameters and pyrolytic analysis provided valuable information concerning the nature of the compost's organic matter and its changes during the composting process.     

Effect of different tannery sludge compost amendment rates on growth,biomass accumulation and yield responses of Capsicum plants

Composting has been recognized as one of the most cost effective and environmentally sound alternatives for organic wastes recycling from long and composted wastes have a potential to substitute inorganic fertilizers. We investigated the potential of composted tannery sludge for ornamental purposes and to examine the effects of two different composts and concentrations on ornamental Capsicum growth. The two composts were produced with tannery sludge and the composition of each compost was: compost₁ of tannery sludge (C₁TS) – tannery sludge + sugarcane straw and cattle manure mixed in the ratio 1:3:1 (v:v:v); compost₂ of tannery sludge (C₂TS) – tannery sludge + “carnauba” straw and cattle manure in the ratio 1:3:1 (v:v:v). Each compost was amended with soil at rates (% v:v) of 0%, 25%, 50%, 75% and 100% (designation hereafter as T₁–T₅, respectively). The number of leaves and fruits were counted, and the stem length was also measured. Chlorophyll content was recorded on three leaves of each harvested plant prior to harvest. Number of leaves and fruits, stem length, dry weight of shoot and roots did not vary significantly between the plants grown in two tannery composts. All the treatments with composted tannery sludge application (T₂–T₅) significantly increased the number of leaves and fruits, stem length and chlorophyll content compared with the control (T₁). The chlorophyll content was higher in plants growing in the C₁TS compared to C₂TS. The results of the present study further suggest that Capsicum may be a good option to be grown on composted tannery amended soil.     

Chemical,physical and microbial properties and microbial diversity in manufactured soils produced from co-composting green waste and biosolids

The effects of adding biosolids to a green waste feedstock (100% green waste, 25% v/v biosolids or 50% biosolids) on the properties of composted products were investigated. Following initial composting, 20% soil or 20% fly ash/river sand mix was added to the composts as would be carried out commercially to produce manufactured soil. Temperatures during composting reached 50 °C, or above, for 23 days when biosolids were included as a composting feedstock but temperatures barely reached 40 °C when green waste alone was composted. Addition of biosolids to the feedstock increased total N, EC, extractable NH₄, NO₃ and P but lowered pH, macroporosity, water holding capacity, microbial biomass C and basal respiration in composts. Additions of soil or ash/sand to the composts greatly increased the available water holding capacity of the materials. Principal component analysis (PCA) of PCR-DGGE 16S rDNA amplicons separated bacterial communities according to addition of soil to the compost. For fungal ITS-RNA amplicons, PCA separated communities based on the addition of biosolids. Bacterial species richness and Shannon’s diversity index were greatest for composts where soil had been added but for fungal communities these parameters were greatest in the treatments where 50% biosolids had been included. These results were interpreted in relation to soil having an inoculation effect and biosolids having an acidifying effect thereby favouring a fungal community.     

Impacts of industrial waste resources on maize (Zea mays L.) growth,yield, nutrients uptake and soil properties

Discharging untreated highly acidic (pH < 4.0), organic and nutrients rich monosodium glutamate wastewater (MW), and highly alkaline (pH > 10.0) paper-mill wastewater (PW) causes environmental pollution. When acidity of MW neutralized (pH 6.5 ± 0.1) with PW and lime (treatments represented as MW + PW and MW + Lime), then MW may be utilized as a potential source of nutrients and organic carbon for sustainable food production. Objectives of this study were to compare the effects of PW and lime neutralized MW and chemical fertilizers on maize (Zea mays L. cv. Snow Jean) plant growth, yield, nutrients uptake, soil organic matter and humic substances. The field experiment was carried out on maize using MW at 6000 L ha^?1. Impacts of the MW application on maize crop and soil properties were evaluated at different stages. At harvest, plant height, and plant N and K uptake were higher in MW treatment. Leaf area index at 60 days after sowing, plant dry matter accumulation at harvest, and kernels ear^?1 and 100-kernel weight were higher in MW + Lime treatment. Kernel N, P, K, Mn, Fe and Zn, and plant Zn uptake were highest in MW + Lime. Plant Fe uptake, and soil organic matter and humic substances were highest in MW + PW. The MW + PW and MW + Lime treatments exhibited comparable results with chemically fertilized treatment. The MW acidity neutralized with lime showed positive impacts on growth, yield and nutrients uptake; nevertheless, when MW pH neutralized with PW has an additional benefit on increase in soil organic matter and humic substances.     

Potential of olive mill wastes for soil C sequestration

The present work deals with the potential of olive mill wastes as a C source for soil C sequestration strategy, which is based on the high lignocellulosic content that makes these wastes to degrade slowly during composting and after land application. A C balance was performed during the whole life cycle of two different two-phase olive mill wastes (TPOMW): C losses were calculated during the composting process and after soil application of the composting mixtures under laboratory conditions. The effect of the degree of stabilization of TPOMW on the overall C waste conservation efficiency was also evaluated. C losses after 34 weeks of TPOMW composting ranged from 40.58% to 45.19% of the initial C, whereas the amount of C evolved as CO2 after 8 months of incubation of soil amended with mature composts only represented between 20.6% and 21.9% of the added C. The total C losses considering the whole life cycle of the TPOMW showed lower losses compared to composts prepared with organic residues of different origin. Conversely to the typical behaviour of other organic wastes, the stabilisation degree of the TPOMW composting mixtures did not show any significant effect on the total C losses measured during composting and later land application. The low rate of degradation of TPOMW both during composting and after soil application makes the use of TPOMW as a C source an attractive strategy for soil C sequestration.     

Land application of biosolids. Soil response to different stabilization degree of the treated organic matter

The effect of land application of biosolids on an agricultural soil was studied in a 2-month incubation experiment. The soil microbial biomass and the availability of heavy metals in the soil was monitored after the application of four different composting mixtures of sewage sludge and cotton waste, at different stages of composting. Land application caused an increase of both size and activity of soil microbial biomass that was related to the stabilization degree of the composting mixture. Sewage sludge stabilization through composting reduced the perturbance of the soil microbial biomass. At the end of the experiment, the size and the activity of the soil microbial biomass following the addition of untreated sewage sludge were twice those developed with mature compost. For the mature compost, the soil microbial biomass recovered its original equilibrium status (defined as the specific respiration activity, qCO2) after 18 days of incubation, whereas the soil amended with less stabilized materials did not recover equilibrium even after the two-month incubation period. The stabilization degree of the added materials did not affect the availability of Zn, Ni, Pb, Cu, Cr and Cd in the soil in the low heavy metal content of the sewage sludge studied. Stabilization of organic wastes before soil application is advisable for the lower perturbation of soil equilibria status and the more efficient C mineralization.     

Enhancement of arsenic mobility by Fe(III)-reducing bacteria from iron oxide minerals

Batch bioleaching experiments were conducted using the Fe(III)-reducing bacteria, Shewanella putrefaciens CN32, to determine the effect of the Fe(III) reduction on As mobilization. For this purpose, Fe(III) reduction experiments were also performed to deduce the optimum conditions of the bioleaching experiment. In the Fe(III) reduction experiment, insoluble Fe(III), such as synthesized poorly and well crystalline hydrous ferric oxide (HFO), was rarely used as electron acceptor by S. putrefaciens. However, the addition of a humic substance (2,6-anthraquinone disulfonate, AQDS) greatly increased iron reduction capacity (5–10 times) under the same conditions. For the poorly and well crystalline HFO, the effective carbon sources as electron donor were acetate and lactate, respectively. In bioleaching experiments using the two types of synthesized Fe(III) oxide minerals bearing As (poorly crystalline HFO and well crystalline HFO), S. putrefaciens enhanced the As mobilization, with 1,870 and 1,460 mg kg^?1 of As released in the poorly and well crystalline HFO, respectively. From a correlation coefficient analysis between reduced Fe and released As, the R ² values were 0.8612 and 0.9115, respectively. These results indicated that the reduction of Fe(III) can enhance the As mobilization. Therefore, bioleaching using the Fe(III)-reducing mechanism can be useful for remediation of As contaminated soil.     

Sugarcane vinasse: Environmental implications of its use

The inadequate and indiscriminate disposal of sugarcane vinasse in soils and water bodies has received much attention since decades ago, due to environmental problems associated to this practice. Vinasse is the final by-product of the biomass distillation, mainly for the production of ethanol, from sugar crops (beet and sugarcane), starch crops (corn, wheat, rice, and cassava), or cellulosic material (harvesting crop residues, sugarcane bagasse, and wood). Because of the large quantities of vinasse produced, alternative treatments and uses have been developed, such as recycling of vinasse in fermentation, fertirrigation, concentration by evaporation, and yeast and energy production. This review was aimed at examining the available data on the subject as a contribution to update the information on sugarcane vinasse, from its characteristics and chemical composition to alternatives uses in Brazil: fertirrigation, concentration by evaporation, energy production; the effects on soil physical, chemical and biological properties; its influence on seed germination, its use as biostimulant and environmental contaminant. The low pH, electric conductivity, and chemical elements present in sugarcane vinasse may cause changes in the chemical and physical–chemical properties of soils, rivers, and lakes with frequent discharges over a long period of time, and also have adverse effects on agricultural soils and biota in general. Thus, new studies and green methods need to be developed aiming at sugarcane vinasse recycling and disposal.     

Heavy metals in source-separated compost and digestates

The production of compost and digestate from source-separated organic residues is well established in Europe. However, these products may be a source of pollutants when applied to soils. In order to assess this issue, composts, solid and liquid digestates from Switzerland were analyzed for heavy metals (Cd, Co, Cr, Cu, Ni, Pb and Zn) addressing factors which may influence the concentration levels: the treatment process, the composition, origin, particle size and impurity content of input materials, the season of input materials collection or the degree of organic matter degradation.Composts (n = 81) showed mean contents being at 60% or less of the legal threshold values. Solid digestates (n = 20) had 20–50% lower values for Cd, Co, Pb and Zn but similar values for Cr, Cu and Ni. Liquid digestates (n = 5) exhibited mean concentrations which were approximately twice the values measured in compost for most elements. Statistical analyses did not reveal clear relationships between influencing factors and heavy metal contents. This suggests that the contamination was rather driven by factors not addressed in the present study.According to mass balance calculations related to Switzerland, the annual loads to agricultural soils resulting from the application of compost and digestates ranged between 2% (Cd) and 22% (Pb) of total heavy metal loads. At regional scale, composts and digestates are therefore minor sources of pollution compared to manure (Co, Cu, Ni, Zn), mineral fertilizer (Cd, Cr) and aerial deposition (Pb). However, for individual fields, fertilization with compost or digestates results in higher heavy metal loads than application of equivalent nutrient inputs through manure or mineral fertilizer.