Modeling urban films using a dynamic multimedia fugacity model

A thin film coats impervious urban surfaces that can act as a source or sink of organic pollutants to the greater environment. We review recent developments in the understanding of film and film-associated pollutant behavior and incorporate them into an unsteady-state version of the fugacity based Multimedia Urban Model (MUM), focusing on detailed considerations of surface film dynamics. The model is used to explore the conditions under which these atmospherically-derived films act as a temporary source of chemicals to the air and/or storm water. Assuming film growth of 2.1 nm d⁻¹ (Wu et al., 2008a), PCB congeners 28 and 180 reach air-film equilibrium within hours and days, respectively. The model results suggest that the film acts as a temporary sink of chemicals from air during dry and cool weather, as a source to air in warmer weather, and as a source to storm water and soil during rain events. Using the downtown area of the City of Toronto Canada, as a case study, the model estimates that nearly 1 g d⁻¹ of ∑₅PCBs are transferred from air to film to storm water.     

Preliminary indications from atomic force microscopy of the presence of rapidly-formed nanoscale films on aquifer material surfaces

The objective of this study was to determine if there is a nanoscale surface film on aquifer-like materials exposed to deep groundwaters, as has previously been found on surfaces exposed to surface and soil waters. Such surface films will modify surface properties that are so important in determining the mobility of many groundwater pollutants. Muscovite mica was used because a) it is a good analogue for the main sorbing phases of many clastic aquifers and b) its cleavage planes are atomically flat allowing high resolution imaging. Freshly-cleaved muscovite plates were exposed to groundwater from a sandstone aquifer for 30 min, and surface properties (morphology, coverage, roughness and tip–substrate force interactions) were measured using atomic force microscopy (AFM). A patchy surface film of several nanometres in depth, incorporating larger separate particles, was found on the mica surface. This film was associated with significantly increased roughness values and AFM probe–sample interaction forces compared with pure water and inorganic (synthetic groundwater) solution controls. Although the results reported are preliminary in nature, if confirmed, such films are likely to affect sorption reactions, surface-facilitated redox interactions, non-aqueous phase liquid wetting angles, and colloid–pathogen–rock attachment, and will thus be of importance in understanding natural attenuation and migration of dissolved, non-aqueous and particulate phases in groundwaters.     

城市旅游区暴雨径流污染过程中的不透水面效应

选取武汉市动物园4种典型的不透水面暴雨径流污染特征进行了系统的研究，以期为旅游区面源污染危害评价和治理提供基本的依据。结果表明，动物园4种不透水面初期径流污染物浓度很高，COD最大值达1140mg／L，下垫面类型及地表累积污染物是影响径流水质的主要因素。通过无量纲累积曲线的分析，表明旅游区不透水面径流初期冲刷严重，该曲线还为面源治理提供了重要的工程参数。     

城市旅游区暴雨径流污染过程中的不透水面效应

选取武汉市动物园4种典型的不透水面暴雨径流污染特征进行了系统的研究,以期为旅游区面源污染危害评价和治理提供基本的依据.结果表明,动物园4种不透水面初期径流污染物浓度很高,COD最大值达1140 mg/L,下垫面类型及地表累积污染物是影响径流水质的主要因素.通过无量纲累积曲线的分析,表明旅游区不透水面径流初期冲刷严重,该曲线还为面源治理提供了重要的工程参数.     

Polychlorinated biphenyls contamination in urban soil of Shanghai: level, compositional profiles and source identification

Surface soil samples taken from 55 sampling sites at the urban areas of Shanghai were collected and analyzed for the occurrence of 144 polychlorinated biphenyls (PCBs) by GC-μECD. The results showed that totally 74 PCB congeners were identified and the mean concentration of total PCBs was 3057 ng kg⁻¹ with a range of 232 to 11325 ng kg⁻¹. Compared with the related reports, the level of PCBs contamination in this study was approximately equal to the global background value in soils, but higher than Chinese background for rural and urban soils. According to the compositional profiles of PCBs homologues, a higher proportion of low chlorinated (from tri-CBs to hexa-CBs) was observed. The results indicated that PCB15 + 13, PCB18, PCB28, PCB104 + 47 and PCB153 were the most dominant congeners among the identified PCBs. Through homologues analysis, cluster analysis and principal component analysis (PCA), it was found that PCBs were stretched from mixed local sources, and appeared to be mostly originated by Aroclor 1260- and 1254-like mixtures as well as some samples influenced by Aroclor 1232 and 1242. The correlation analysis showed the relatively good correlation among the PCB homologues and soil total organic carbon (TOC), suggesting important influence of soil TOC on PCBs contamination in soil matrix in Shanghai region. The toxic equivalency (TEQ) concentrations of these six dioxin-like PCBs detected in urban soil samples range from 2.71 to 24.9 pg kg⁻¹-PCDDeq with a mean 8.18 pg kg⁻¹-PCDDeq.     

Effects of point-source PCB contamination on breeding performance and post-fledging survival in the dipper Cinclus cinclus

Despite widespread information on the incidence and biochemical effects of polychlorinated biphenyls (PCBs) in birds, field studies of effects on population processes are still scarce. This is particularly so in passerines. We therefore assessed breeding performance and post-fledging survival in dippers, Cinclus cinclus, breeding along the Afon Mule, a Welsh river where previous work indicated locally elevated PCB concentrations. We hypothesised that marked toxicological effects, including endocrine disruption, would be detectable as altered clutch-size, hatching success, nest success, brood-size, post-fledging survival or recruitment to the breeding population. Congener-specific analysis of PCBs in failed and deserted dipper eggs during 1990–93 revealed that geometric mean concentrations were four to 20 times higher along the Mule than elsewhere in Wales, UK. PCB signatures also varied highly significantly from other locations, with congeners 138, 153 and 180 dominant at the contaminated site, but 118 or 170 more frequent in eggs elsewhere. Subsequent analysis of surface runoff confirmed a small breaker's yard as a point source. Neither laying dates, clutch-sizes, brood-sizes, nest failure nor hatching failure along the contaminated Mule (n=46 breeding attempts and 218 eggs) differed significantly from dippers along adjacent reference rivers (n=82 breeding attempts and 315 eggs) or Welsh rivers as a whole (n=332 breeding attempts and 1534 eggs). Subsequent recaptures of breeding dippers ringed initially as nestlings were nearly identical between the Mule (7.7% of 182 nestlings), the reference set (7.5% of 323 nestlings) and all other Welsh rivers (7.3% of 2821 nestlings). These data illustrate the value of congener-specific analysis of bird's eggs in indicating local PCB sources. The data show also that PCBs can occur in dipper eggs at total concentrations of 0.49 (geometric mean)–1.29 (upper quartile) μg g⁻¹ wet mass without effects on breeding performance and survival. These values are below those at which biochemical or reproductive effects on other passerines have been detected, but above current concentrations in any other population of European dippers for which PCB data are available. Population effects by PCBs on European dippers are therefore unlikely. Survivors from locally contaminated sites like that in our study might allow field assessments of second-generation effects on breeding performance in wild birds that have developed under PCB exposure.     

Metal contamination of short-term snow cover near urban crossroads: correlation analysis of metal content and fine particles distribution

Snow samples were collected near crossroads in Novi Sad, Serbia, during December 2009 to assess metal concentrations (Ca, K, Zn, Fe, Cu, Mn, Al, Pb and Na), fine particle distribution and pH value. The filtered samples of melted snow were analysed, with a focus on particles smaller than a few μm. The most common values of the frequency number distribution curve were either in the range of 0.05-0.07 μm or one order of magnitude higher (0.2-0.5 μm). At examined locations metal concentrations varied from 0.0004 mg L⁻¹ for Pb to 18.9 mg L⁻¹ for Na. Besides Na, which mostly originated from de-icing salt, Ca is found to be the most abundant element in snow indicating the dominant influence of natural factors on snow chemistry. No significant difference was found in concentration of the elements at locations near crossroads with either low or high traffic volume, except for Na and Zn.To investigate how metals were related a correlation analysis was done for the concentrations of metals and with respect to the particle size distribution parameters and pH values. The major influence on the fine particle volume (mass) was concluded to be due to the elements from anthropogenic sources. This conclusion was based on the significant positive correlation between Fe, Zn and Al and the fine particle volume based distribution parameters.     

Effect of coplanar PCB concentration on dechlorinating microbial communities and dechlorination in estuarine sediments

The effect of concentration of coplanar PCB on the dechlorinating microbial community and dechlorination were investigated in anoxic estuarine sediment collected from Er-Jen River and enriched with 10 and 50 mg L⁻¹ of 3,4,4′,5-tetrachlorobiphenyl, 3,3′,4,4′,5-pentachlorobiphenyl, and 3,3′,4,4′,5,5′-hexachlorobipheny. Dechlorination rates were similar in the cultures enriched with 10 and 50 mg L⁻¹ of 3,4,4′,5-tetrachlorobiphenyl, whereas significantly higher dechlorination rates were observed in cultures enriched with 10 mg L⁻¹ of 3,3′,4,4′,5-pentachlorobiphenyl. No dechlorination was observed in sediment slurries enriched with 3,3′,4,4′,5,5′-hexachlorobipheny. Para dechlorination occurred prior to meta dechlorination during reductive dechlorination of 3,4,4′,5-tetrachlorobiphenyl and 3,3′,4,4′,5-pentachlorobiphenyl. GC-MS and denaturing gradient gel electrophoresis (DGGE) were used to detect dechlorination products and dechlorinating microorganisms in the enriched sediment cultures during the process of degradation. Two Chloroflexi phylotypes observed in DGGE were responsible for para and meta dechlorination respectively. Phylotype Cp-1 has 98% similarity to uncultured bacterium N5-12. Phylotype Cm-1 has 99% similarity to uncultured dechlorinating bacterium m1 or SF1 belonging to the ο-17/DF-1 group of PCB-dechlorinating bacteria.     

Combined approaches to determine the impact of wood fire on PCDD/F and PCB contamination of the environment: a case study

Fires might be the source of persistent organic pollutants (POPs) such as dioxins, furans (PCDD/Fs) and/or polychlorobiphenyls (PCBs) in the environment. In the perspective of defining legal responsibilities a thorough characterization of the impact of such an event should be carried out. However, such characterization is not easy as the environment integrates both local and diffuse sources of such molecules. Thus, a combined approach, which includes gathering field surveys, modeling and laboratory experiments, should be conducted. The objective of this work is to illustrate different approaches to give sufficient insight to determine the actual impact of wood fire on the environment. The work was carried out at the vicinity of a burnt down parcel. The fired material was a mixture of wood and PCB-contaminated soils as the site was a former pyralene-disposal site. Modeling, soil and lichen sampling and experimental combustion were carried out to delineate the contamination for each chemical and to define the area within the fire that was responsible for the environmental contamination. Concentrations of PCDD/F and PCBs were very high on the burnt plot. The combined approach determined that the furans were the predominant compounds in the smoke emitted by the fire. Based on this tracer, it was possible to demonstrate that in terms of environmental contamination of PCDD/F, the impact of the fire was restricted to a 2 km radius from the burnt down plot. For PCBs, no specific tracer was identified. In this case, the delineation of the impact could only be empirical, based on the total concentration of the chemicals.     

Temporal variations of surface water quality in urban, suburban and rural areas during rapid urbanization in Shanghai, China

As the economic and financial center of China, Shanghai has experienced an extensive urban expansion since the early 1980s, with an attendant cost in environmental degradation. We use an integrated pollution index to study the temporal variations of surface water quality in urban, suburban and rural areas between 1982 and 2005. Data on monitored cross-sections were collected from the Shanghai Environmental Monitoring Center. The results indicated that the spatial pattern of surface water quality was determined by the level of urbanization. Surface water qualities in urban and suburban areas were improved by strengthening the environmental policies and management, but were worsening in rural areas. The relationship between economic growth and surface water quality in Shanghai showed an inversed-U-shaped curve, which reflected a similar pattern in most developed countries. This research suggests that decision makers and city officials should be more aware of the recent pollution increases in Shanghai.     

Inconsistency and comprehensiveness of risk assessments for heavy metals in urban surface sediments

Numerous indices have been developed to assess environmental risk of heavy metals in surface sediments, including the total content based geoaccumulation index (I_geo), exchangeable fraction based risk assessment code (RAC), and biological toxicity test based sediment quality guidelines (SQGs). In this study, the three indices were applied to freshwater surface sediments from 10 sections along an urbanization gradient of the Grand Canal, China to assess the environmental risks of heavy metals (Cu, Pb, Zn, Cd, and Cr) and to understand discrepancies of risk assessment indices and urbanization effects regarding heavy metal contamination. Results showed that Cd, Zn, and Pb were the most enriched metals in urban sections assessed by I_geo and over 95% of the samples exceeded the Zn and Pb thresholds of the effect range low (ERL) of SQGs. According to RAC, Cu, Zn, Cd, and Cr had high risks of adversely affecting the water quality of the Grand Canal due to their remarkable portions of exchangeable fraction in surface sediment. However, Pb showed a relative low risk, and was largely bounded to Fe/Mn oxides in the urban surface sediments. Obviously, the three assessment indices were not consistent with each other in terms of predicting environmental risks attributed to heavy metals in the freshwater surface sediments of this study. It is recommended that risk assessment by SQGs should be revised according to availability and site specificity. However, the combination of the three indices gave us a comprehensive understanding of heavy metal risks in the urban surface sediments of the Grand Canal.     

Analysis of surface and aerosol polarized reflectance for aerosol retrievals from polarized remote sensing in PRD urban region

A precise estimate of polarization induced by surface is crucial for polarized remote sensing dedicated to monitoring aerosol properties over urban area. The accurate knowledge of interaction between surface and aerosol polarized reflectance is essential for accurately achieving aerosol properties. In order to study surface and aerosol polarized reflectance for aerosol retrievals over urban area, a new airborne directional polarimetric camera (DPC) with high spatial resolution (4 m at 4000 m a.g.l) was developed. The surface polarized reflectance over distinct surface covers of urban area (forest, shrub, and soil) were studied using DPC measurements during a field campaign in the Pearl River Delta (PRD), China. The large variations were found in surface polarized reflectance of distinct urban covers due to surface type variability. For all surface types, the empirical BPDF model cannot describe accurately surface polarized reflectance at all possible illumination and observation geometries. From the quantitatively study of relationship between surface and aerosol polarized contribution to DPC measurements, we show that the polarized contributions of aerosol, which optical properties were defined by ground-based measurements, are much larger than the polarized contribution of surface, and found that the polarized contribution of surface covers increases with decreasing NDVI. The effect of polarization accuracy of measurements on aerosol retrieval was also investigated using DPC measurements, and found that 0.1% polarization accuracy of measurements can be neglected when AOD is retrieved using polarized measurements. Based on the information of effects of polarized reflectance differences between distinct surface covers and polarization accuracy of polarized measurements on retrieved aerosols over urban area, we found that the accuracy of aerosol retrieval over forest covers is higher than other surface types using polarized remote sensing.     

Effect of an organic amendment on availability and bio-accessibility of some metals in soils of urban recreational areas

A composted biosolid from wastewater treatment was added to soils of two public parks of Sevilla, and successive samples were taken during one year. In one of the parks, a second addition of biosolid was carried out after the first year. The soil contents in metals (pseudo-total) and their plant-available and oral bio-accessible fractions were significantly altered when the soils were amended with biosolid. Increase of the bio-accessible metal contents represents a deterioration of the environmental quality of recreational areas, where hand-to-mouth transfer of pollutants to children is likely to occur, although part of the metals added might be leached by rainfall or irrigation. The limits established in several countries for metal contents of soils in recreational areas are often exceeded after application of the biosolid. A careful study of the metal contents of recycled wastes is thus recommended before being used for green area maintenance.     

Measurement and modeling of urban atmospheric PCB concentrations on a small (8 km) spatial scale

Atmospheric transport and deposition of polychlorinated biphenyls (PCBs) is an important problem for ecosystems around the world. Data from several monitoring networks demonstrate that atmospheric PCB concentrations are dramatically elevated in urban areas compared to rural or background regions, such that these urban emissions of PCBs support the regional and global transport and deposition of PCBs to more remote areas. Identifying and controlling the sources of urban atmospheric PCBs is thus essential in minimizing the regional and global transport and deposition of these compounds. From December 1999 to November 2000, gas-phase PCB concentrations were measured at two monitoring locations, 8 km apart, within the New York City metropolitan area, at Jersey City and Bayonne, NJ. Concentrations, congener patterns, and temporal patterns of PCBs differ dramatically at the two sites, suggesting that a significant source of atmospheric PCBs exists within 8 km of the Bayonne site, resulting in spikes in gas-phase PCB concentration at Bayonne that are not observed at Jersey City. The Regional Atmospheric Model System (RAMS) coupled with the Hybrid Particle and Concentration Transport model (HYPACT) was used to estimate that the PCB source near Bayonne emits a flux of ΣPCBs on the order of 100 g d⁻¹. Extrapolation of this source magnitude to the area of New York City suggests that this urban area emits at least 300 kg yr⁻¹ ΣPCBs to the regional atmosphere, similar in magnitude to the flow of ΣPCB out of the Upper Hudson River into the New York/New Jersey Harbor.     

The impact of production type and region on polychlorinated biphenyl (PCB), polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/F) concentrations in Canadian chicken egg yolks

Chicken eggs from five different production types (conventional, omega-3 enriched, free range, organic and free run) were collected, when available, from three regions (west, central and east) of Canada to determine persistent organic pollutant (POP) concentrations. Total polychlorinated biphenyl (PCB) concentrations (∑37 congeners) in yolks from the eggs ranged from 0.162 ng g⁻¹ lipid to 24.8 ng g⁻¹ lipid (median 1.25 ng g⁻¹ lipid) while the concentration of the sum of the 6 indicator PCBs ranged from 0.100 ng g⁻¹ lipid to 9.33 ng g⁻¹ lipid (median 0.495 ng g⁻¹ lipid). Total polychlorinated dibenzo-p-dioxin/dibenzofuran (PCDD/F) concentrations ranged from 2.37 pg g⁻¹ lipid to 382 pg g⁻¹ lipid (median 9.53 pg g⁻¹ lipid). The 2005 WHO toxic equivalency (TEQ) ranged from 0.089 pg TEQ_{PCDD/F+dioxin-like[DL]-PCB} g⁻¹ lipid to 12.8 pg TEQ_{PCDD/F+DL-PCB} g⁻¹ lipid (median 0.342 pg TEQ_{PCDD/F+DL-PCB} g⁻¹ lipid). PCB and PCDD/F concentrations were significantly different (p < 0.001) in egg yolks from different regions of collection. In contrast to observations in Europe, PCB and PCDD/F concentrations in Canadian egg yolks were not impacted solely by the production type (e.g., conventional, free range, organic, etc.) used to maintain the laying chickens. Additionally, only one Canadian free range yolk from western Canada (12.8 pg TEQ_{PCDD/F+DL-PCB} g⁻¹ lipid) exceeded the European toxic equivalent concentration limits for eggs (5 pg TEQ_{PCDD/F+DL-PCB} g⁻¹ lipid). This differs from observations in Europe where free range/home produced eggs frequently have higher POP concentrations than eggs from other production types. Median PCB dietary intake estimates based on consumption of eggs were less than 10 ng d⁻¹ while median PCDD/F intakes were less than 45 pg d⁻¹.     

Analysis of organic and inorganic species on the surface of atmospheric aerosol using time-of-flight secondary ion mass spectrometry (TOF-SIMS)

This work explores the utility of time-of-flight static secondary-ion mass spectrometry (TOF-SIMS) for the analysis of the surface organic layer on individual atmospheric aerosol particles. The surface sensitivity and minimal fragmentation available with TOF-SIMS suggest that it can be a powerful tool for the examination of the organic and inorganic species on the surface of individual particles. Cascade impactors were used to collect aerosol from summer 2000 Montana forest fires, winter snowmobile samples in Yellowstone National Park, Hawaiian lava and sea salt, from an Asian Dust event reaching Salt Lake City, Utah in April 2001 and from Salt Lake Valley summer urban aerosol. TOF-SIMS analysis and multivariate statistical techniques combined gave chemical and morphological information about the particles. Surfaces of the aerosol from forest fires, snowmobile exhaust, and sea salt were all dominated by aliphatic hydrocarbons and their amphiphilic derivatives. Each source showed a different organic chemical signature. The extent and composition of the organics layer which typically covers the surface of atmospheric particles are expected to effect all of the surface related aerosol properties such as health effects, the ability of the particle to activate and form cloud droplets, and the aggregation of particles as well as reactions between the particle and gas phase species.     

Effect of salt and urban water samples on bacterivory by the ciliate, Tetrahymena thermophila

The effect of road salt on the eating of bacteria or bacterivory by the ciliate, Tetrahymena thermophila, was followed in non-nutrient Osterhout's solution with Escherichia coli expressing green fluorescent protein. Bacterivory was impaired at between 0.025 and 0.050% w/v but the ciliates appeared to have normal morphologies and motilities, whereas at above 0.1%, bacterivory was blocked and many ciliates died. By contrast, E. coli remained viable, suggesting salt could alter predator-prey relationships in microbial communities. In nutrient medium, salt was not toxic and the ciliates grew. After growth in salt, ciliates consumed bacteria in 0.2% salt, indicating the salt acclimation of bacterivory. Bacteria and ciliates were added to urban creek samples to compare their capacity to support exogenous bacterivory. Even though samples were collected weekly for a year and be expected to have fluctuating salt levels as a result of deicing, all creek samples supported a similar level of bacterivory.     

Effect of surface coatings, grain size, and ionic strength on the maximum attainable coverage of bacteria on sand surfaces

The injection of bacteria in the subsurface has been identified as a potential method for in situ cleanup of contaminated aquifers. For high bacterial loadings, the presence of previously deposited bacteria can result in decreased deposition rates--a phenomenon known as blocking. Miscible displacement experiments were performed on short sand columns (approximately 5 cm) to determine how bacterial deposition on positively charged metal-oxyhydroxide-coated sands is affected by the presence of previously deposited bacteria. Approximately 8 pore volumes of a radiolabeled bacterial suspension at a concentration of approximately 1 x 10(9) cells ml-1 were introduced into the columns followed by a 2-pore-volume flush of cell-free buffer. It was found that the presence of Al- and Fe-coated sand increased both deposition rates and maximum fractional surface coverage of bacteria on the sediment surfaces. The effect of grain size on maximum bacterial retention capacity, however, was not significant. Decreasing ionic strength from 10(-1) to 10(-2) M KCl resulted in noticeable decreases in sticking efficiency (alpha) and maximum surface coverage (thetamax) for clean silica sand--results consistent with DLVO theory. In columns containing positively charged Al- and Fe-coated sands, however, changes in alpha and thetamax due to decreasing ionic strength were minimal. These findings demonstrate the importance of geochemical controls on the maximum bacterial retention capacity of sands.     

Responses of herbaceous plants to urban air pollution: Effects on growth, phenology and leaf surface characteristics

Vehicle exhaust emissions are a dominant feature of urban environments and are widely believed to have detrimental effects on plants. The effects of diesel exhaust emissions on 12 herbaceous species were studied with respect to growth, flower development, leaf senescence and leaf surface wax characteristics. A diesel generator was used to produce concentrations of nitrogen oxides (NO_x) representative of urban conditions, in solardome chambers. Annual mean NO_x concentrations ranged from 77 nl l^−l to 98 nl l⁻¹, with NO:NO₂ ratios of 1.4-2.2, providing a good experimental simulation of polluted roadside environments. Pollutant exposure resulted in species-specific changes in growth and phenology, with a consistent trend for accelerated senescence and delayed flowering. Leaf surface characteristics were also affected; contact angle measurements indicated changes in surface wax structure following pollutant exposure. The study demonstrated clearly the potential for realistic levels of vehicle exhaust pollution to have direct adverse effects on urban vegetation.