A review of waste prevention through 3R under the concept of circular economy in China

The large waste generation has become one of the worldwide environmental problems. Circular economy has been seen as a way to tackle its urgent problems of environmental degradation and source scarcity. In recent years, under the concepts of circular economy, waste prevention through “Reduce, Reuse and Recycle” (3R) rules have attracted a broad concern in China. China has made some great achievements on waste management, and at the same time is facing many challenges. It is very necessary to share the management experiences and practices with the scholars and managers in other countries. This review covered the current situation and progress of circular economy development from the perspective of the legal regime and project practices, and the recycling practices of typical waste. The typical household wastes, including municipal solid wastes (MSW), e-waste, and end of life vehicles (ELV), were studied as the typical cases. Based on an examination of the statistical results, we also identified the potential problems and challenges for waste prevention through 3R in China. Finally, we provided some effective measures to further improve the waste management and recycling in China.     

The circular economy in China

This article makes an attempt to answer the three questions of why China is devoting its full effort to promoting a circular economy, what a circular economy is, and how to implement a circular economy in China. The evolutionary process of a circular economy in China, from introduction of the concept and the relevant actions of national decision making to demonstration of the system nationwide, has taken only around 6 years, with strong encouragement from politicians and the urgent need to cope with environmental pollution and a severe shortage of natural resources. The circular economy in China is now being actively implemented at three levels: enterprises, eco-industrial parks, and regions. The consolidated theoretical bases of ecology and economics have helped the circular economy to define its position as a new economic model to effectively resolve the problems of resources and the environment. In this regard, material flow management is naturally a unique planning and management method for implementation of a circular economy, and eco-efficiency is a good indicator to measure circular economic activities. Of particular significance has been initiation of the legislative process for the Circular Economy Law, which is among a number of initiatives developing core policies for a circular economy in China. Stringent enforcement of a set of policies for energy saving and pollution abatement nowadays in China will certainly create an enabling environment for the development of a circular economy.     

《循环经济促进法》施行效果评估分析

《循环经济促进法》正式施行以来,循环经济法规制度体系逐渐完善,循环经济发展模式日趋成熟,循环经济试点工作进展显著,催生了一批符合循环经济要求的新技术和工艺。但是也存在着循环经济发展地区间尚不平衡,配套法规规章和规范性文件尚不健全,支撑体系尚较薄弱,激励措施和相关政策有待完善等问题。为此,要抓紧制定完善配套法规、规章和标准,进一步理顺体制机制,加快出台循环经济发展规划和经济激励政策,强化关键技术研发,全面推广循环经济发展典型模式,积极培育循环经济服务产业,加快相关支撑体系建设。     

Application of system dynamics modeling for evaluation of different recycling scenarios in Singapore

The influence of socioeconomic factors, such as population and rapid economic growth, and the change of consumption and living patterns make waste management in Singapore, a complex issue. Due to limited land and resources, the solid waste management scheme requires a comprehensive approach. Therefore, system dynamics (SD) modeling was applied to assess alternative strategies for solid waste management by interconnecting landfill capacity and recycling efficiency with reference to the projection on waste generation. Nine different scenarios were investigated to identify the best approach to maintain environmental sustainability without inhibiting the economic growth. Four subsystems (i.e., population, economy, waste recycling, and waste disposal) have been incorporated into the SD model to broaden the effectiveness of the waste management system. Research findings revealed that a high economic pattern and a high recycling rate are recommended to satisfy the requirements for economic growth and environmental sustainability while extending landfill capacity for waste disposal. Even though the balance of expenditure could be increased by the high recycling rate, it meets the need for long-term incineration and landfill planning.     

基于熵值法新疆循环经济发展综合评价分析

根据循环经济理论,针对新疆循环经济的发展,从资源可承载能力、环境发展、社会经济发展三个方面考虑建立新疆循环经济发展的综合评价指标体系,运用熵值法对新疆10年循环经济的发展水平进行综合评价,进而提出了相应的措施,包括完善法律法规体系、加快产业结构调整、加大政策鼓励力度、促进产业集聚等.     

Enhancing the economic potential of organic waste by co-composting using ratio modelling toward a circular economy

Journal of Material Cycles and Waste Management - Co-composting, a circular economy approach to waste management, has economic potential and environmental benefits through nutrient recycling and...     

Report: integrated industrial waste management systems in China.

Various models of urban sustainable development have been introduced in recent years and some of these such as integrated waste management have been proved to be of particular value. Integrated industrial waste management systems include all the administrative, financial, legal, planning and engineering functions involved in solutions to the problems of industrial waste. Even though the pace of the improvement made to China's industrial waste management capacity is impressive, China has been unable to keep up with the increasing demand for waste management. This paper will evaluate the application of integrated industrial waste management systems in promoting urban sustainable development in the context of three case study cities in China (positive case, average case and negative case) by identifying and accessing the factors that affect the success or failure of integrated industrial waste management systems.     

Drivers and barriers to successful solid waste management: assessing through an aggregated indicator

Journal of Material Cycles and Waste Management - Solid waste management is the main topic of the circular economy and remains a challenge for public management, because despite the recent economic...     

Eco-efficiency for greenhouse gas emissions mitigation of municipal solid waste management: a case study of Tianjin, China

The issue of municipal solid waste (MSW) management has been highlighted in China due to the continually increasing MSW volumes being generated and the limited capacity of waste treatment facilities. This article presents a quantitative eco-efficiency (E/E) analysis on MSW management in terms of greenhouse gas (GHG) mitigation. A methodology for E/E analysis has been proposed, with an emphasis on the consistent integration of life cycle assessment (LCA) and life cycle costing (LCC). The environmental and economic impacts derived from LCA and LCC have been normalized and defined as a quantitative E/E indicator. The proposed method was applied in a case study of Tianjin, China. The study assessed the current MSW management system, as well as a set of alternative scenarios, to investigate trade-offs between economy and GHG emissions mitigation. Additionally, contribution analysis was conducted on both LCA and LCC to identify key issues driving environmental and economic impacts. The results show that the current Tianjin’s MSW management system emits the highest GHG and costs the least, whereas the situation reverses in the integrated scenario. The key issues identified by the contribution analysis show no linear relationship between the global warming impact and the cost impact in MSW management system. The landfill gas utilization scenario is indicated as a potential optimum scenario by the proposed E/E analysis, given the characteristics of MSW, technology levels, and chosen methodologies. The E/E analysis provides an attractive direction towards sustainable waste management, though some questions with respect to uncertainty need to be discussed further.     

International comparative study of 3R and waste management policy developments

Reduce, reuse, and recycle (3R) policies form the basis of waste management and global warming countermeasures globally, so we conducted a comparative study of 3R and waste management policies in the European Union (EU), USA, Korea, Japan, China, and Vietnam. An international workshop for 3R and waste management policymakers was held in Kyoto, Japan, and a bibliographic survey was also conducted to collect data. 3R policies are clearly given priority in the hierarchy of waste management in every country studied. Thermal recovery, which includes power generation from waste heat and methane gas collected from organic waste, is also a priority; this is consistent with the increased use of countermeasures to reduce greenhouse gas (GHG) emissions. In the EU, waste management is characterized by practical and effective 3R policies through the development of realistic regulations and by the policymakers??desire to simplify management systems. The policy ideal in China, however, is the development of a circular economy that targets reductions in the amount and hazardousness of waste. Limits on the number of final disposal sites, strategies for procuring resources, and GHG emission countermeasures are closely linked with 3R policies, and further development of 3R policies in parallel with such issues is expected.     

Scenarios simulation on municipal plastic waste generation of different functional areas of Beijing

With the rapid economic development of China and the improvement of people’s living standards, municipal plastic waste (MPW) has increasingly become a major problem for cities in China. The generation of plastic waste is a system which integrates social, economical and environment factors. There is a certain guiding significance for the determination of urban plastic waste management priorities to research MPW generation with the background of the regional development of the city. As the capital of China, Beijing develops with a typically regional characteristic. This article establishes a generation system model for MPW by the method of system dynamics, and takes Beijing as an example to simulate and forecast the MPW generations of four functional areas on scenarios. The data used in the model were mainly obtained from statistical materials and on-site survey. The results showed a better regulating effect of the generation of MPW of Beijing under an integrated control scenario. In terms of space, MPW generation of the urban function extended districts generated the largest amount of plastic waste, with the largest growth rate; the proportion of MPW generation of the new districts of urban development increased significantly. In terms of generation source, the resident communities source generated the largest amount of the MPW. Based on the results, some suggestions on MPW management are put forward.     

A systems analysis tool for construction and demolition wastes management

Managing construction and demolition (C&D) wastes has challenged many municipalities with diminishing waste disposal capacity. Facing such challenges, the Massachusetts Department of Environmental Protection proposed a policy restricting the landfill disposal of certain C&D waste materials, if unprocessed. This research is to study the potential economic impact of such restriction on construction contractors and C&D waste processors. A spreadsheet-based systems analysis model has been developed to assist the cost-benefit evaluation for various C&D waste management scenarios. The model, developed based on the mass balance principle, is designed to track a C&D waste stream through the various stages of a waste management system, i.e. generation, source separation, processing, recycling, and final disposal. This model, by incorporating the material flow data with the cost/revenue data associated with each management activity, can then provide an economic analysis for a proposed C&D waste management scenario. A case study illustrating the application of this model for Massachusetts is also presented.     

开发区循环经济保障体系探讨

在分析我国目前实施循环经济所存在问题的基础上，以开发区为例提出了构建发展循环经济的保障体系，着重从组织、政策、技术、资金等方面进行了论证，为开发区按循环经济要求运行进行了探索，也为循环经济的顺利开展提供了科学依据。     

A dynamic model for assessing the effects of management strategies on the reduction of construction and demolition waste

During the past few decades, construction and demolition (C&D) waste has received increasing attention from construction practitioners and researchers worldwide. A plethora of research regarding C&D waste management has been published in various academic journals. However, it has been determined that existing studies with respect to C&D waste reduction are mainly carried out from a static perspective, without considering the dynamic and interdependent nature of the whole waste reduction system. This might lead to misunderstanding about the actual effect of implementing any waste reduction strategies. Therefore, this research proposes a model that can serve as a decision support tool for projecting C&D waste reduction in line with the waste management situation of a given construction project, and more importantly, as a platform for simulating effects of various management strategies on C&D waste reduction. The research is conducted using system dynamics methodology, which is a systematic approach that deals with the complexity - interrelationships and dynamics - of any social, economic and managerial system. The dynamic model integrates major variables that affect C&D waste reduction. In this paper, seven causal loop diagrams that can deepen understanding about the feedback relationships underlying C&D waste reduction system are firstly presented. Then a stock-flow diagram is formulated by using software for system dynamics modeling. Finally, a case study is used to illustrate the validation and application of the proposed model. Results of the case study not only built confidence in the model so that it can be used for quantitative analysis, but also assessed and compared the effect of three designed policy scenarios on C&D waste reduction. One major contribution of this study is the development of a dynamic model for evaluating C&D waste reduction strategies under various scenarios, so that best management strategies could be identified before being implemented in practice.     

循环经济模式构建探讨（续前）

（接上期）4循环经济模式的实践4.1国外循环经济模式解析由于国情不同、发展阶段不同、科技文化发展水平和传统不同,以及制度、体制、机制不同,所以各国在循环经济认识与实践方面有较大差异。     

太钢的转型发展之路

钢铁行业是二氧化碳及其他污染物排放的重点行业之一。太原钢铁(集团)公司作为山西省最大的工业企业,以科学发展观为统领,着力转变发展方式,把发展循环经济作为企业绿色转型的内在动力,实现了跨越式发展,取得经济效益和社会效益双丰收。     

A Study of Sustainable Material Management Approach in Taiwan

Sustainable material management (SMM) has been initiated by the Organization for Economic Cooperation and Development (OECD) in 2005. SMM is an approach to promote resource conservation, reducing negative environmental impacts and preserving the natural capital of material and the balance of economic efficiency and social equity. Life cycle assessment and material flow analysis have been widely used to estimate the environmental impacts for resource consumption, but economic development has not been taken into account. Before 1984, improper garbage disposal was not an important issue in Taiwan. But over the past three decades, the Taiwan Government has accomplished not only waste disposal but also resource recycling, which are conducive to the essence of SMM. This study is the first research project to develop a SMM conceptual model for policy and strategy in Taiwan. SMM is the suitable waste management concept for the next era. This study reviewed the policy and strategy that has been applied in Taiwan’s waste management, and compares the efficiency of waste management policy in Taiwan with the concept of SMM. A case study of the waste flow will be used to prove that the sustainable material policy can be a suitable management system to achieve sustainable development. This study will open a new chapter of research on global SMM for Taiwan.     

国外建筑废弃物循环利用的经验及对我国的启示

伴随着建筑废弃物产生量的迅速增长,建筑废弃物循环利用已成为循环经济发展的重点领域。从完善的法律法规、深度循环利用方式和产业化发展等方面,对国外发达国家废弃物循环利用的经验和做法加以总结和提升,并结合我国实际,提出建立健全我国建筑废弃物法律法规体系、构筑多级循环利用模式和培育废弃物利用产业体系的几点启示,以期为我国相关部门制定建筑废弃物的相关政策制度、提高建筑废弃物的循环再利用水平提供参考和依据。     

促进循环经济发展的融资政策创新研究

环境污染成为我国可持续发展当中面对的最大问题,发展循环经济是必然选择,然而资金问题制约了循环经济的深入发展。从政府和市场两个角度分析了循环经济发展中融资约束的原因,针对性地提出政府和市场各尽其责、完善支持循环经济发展的融资体系的想法,并以最新的环保项目融资为切入点,为政府与市场的融资合作创新提供了一些思路,最后建议通过实现循环经济融资主体多元化、方式多样化和结构合理化的“三化”来实现循环经济融资的最大、最优化。     

A model for evaluating the social performance of construction waste management

It has been determined by existing literature that a lot of research efforts have been made to the economic performance of construction waste management (CWM), but less attention is paid to investigation of the social performance of CWM. This study therefore attempts to develop a model for quantitatively evaluating the social performance of CWM by using a system dynamics (SD) approach. Firstly, major variables affecting the social performance of CWM are identified and a holistic system for assessing the social performance of CWM is formulated in line with feedback relationships underlying these variables. The developed system is then converted into a SD model through the software iThink. An empirical case study is finally conducted to demonstrate application of the model. Results of model validation indicate that the model is robust and reasonable to reflect the situation of the real system under study. Findings of the case study offer helpful insights into effectively promoting the social performance of CWM of the project investigated. Furthermore, the model exhibits great potential to function as an experimental platform for dynamically evaluating effects of management measures on improving the social performance of CWM of construction projects.