Thermal degradation of hexachlorobenzene in the presence of calcium oxide at 340–400 °C

Hexachlorobenzene (HCB) in the milligram range was co-heated with calcium oxide (CaO) powder in sealed glass ampoules at 340–400 °C. The heated samples were characterized and analyzed by Raman spectroscopy, elemental analysis, gas chromatography/mass spectrometry, ion chromatography, and thermal/optical carbon analysis. The degradation products of HCB were studied at different temperatures and heated times. The amorphous carbon was firstly quantitatively evaluated and was thought to be important fate of the C element of HCB. The yield of amorphous carbon in products increased with heating time, for samples treated for 8 h at 340, 380 °C and 400 °C, the value were 17.5%, 34.8% and 50.2%, respectively. After identification of the dechlorination products, the HCB degradation on CaO at 340–400 °C was supposed to through dechlorination/polymerization pathway, which is induced by electron transfer, generate chloride ions and form high-molecular weight intermediates with significant levels of both hydrogen and chlorine, and finally form amorphous carbon. Higher temperature was beneficial for the dechlorination/polymerization efficiency. The results are helpful for clarifying the reaction mechanism for thermal degradation of chlorinated aromatics in alkaline matrices.     

Hazardous air pollutants formation from reactions of raw meal organics in cement kilns

Thermally induced chlorination, condensation, and formation reactions of raw meal organic surrogates were investigated on different types of surfaces. The System for Thermal Diagnostic Studies provided a powerful tool to study these reactions under defined reaction conditions, which were related to typical conditions in the preheater zone of cement kiln. Experiments were conducted with benzene and benzene/myristic acid (C6H6/C13H27COOH) mixtures in a quartz reactor containing different chlorinating catalysts/reagents over a temperature range of 300-500 degrees C. Reaction products were trapped in-line and analyzed by GC-MS. A mixture of chlorides of calcium, potassium, aluminium and iron was highly effective for chlorination/condensation reactions of benzene and benzene/myristic acid mix at temperatures above 300 degrees C. The same behavior was observed only when calcium chloride and potassium chloride were used as chlorinating catalyst/reagent. This result showed that transition metal chlorides like FeCl3 are not necessary for chlorination/condensation of organics under post-combustion conditions. Methylene chloride was the major chlorinated product followed by chloroform and various other C1, C2 and C6 chlorinated products. Yields of chlorinated aliphatics were highest at 400 degrees C for both benzene and benzene/myristic acid mix. C6 products were mainly mono- to hexa-chlorinated benzenes with trace amounts of chlorinated phenols. The major chlorinated products observed in this study (i.e., methylene chloride, chloroform, chloroethanes and monochlorobenzene) were also present as major chlorinated hydrocarbons in the cement kiln field emission data.     

Decolorization and degradation of H-acid and other dyes using ferrous-hydrogen peroxide system

In this study, advanced oxidation process utilizing Fenton's reaction was investigated for the decolorization and degradation of two commercial dyes viz., Red M5B, Blue MR and H-acid, a dye intermediate used in chemical industries for the synthesis of direct, reactive and azo dyes. Effect of Fe2 +, H2O2, pH, and contact time on the degradation of the dyes was studied. Maximum color and COD removal was obtained for Red MSB, H-acid and Blue MR at 10-25 mg/l of Fe2+ dose and 400-500 mg/l of H2O2 dose at pH 3.0. The initial oxidation reaction was found to fit into first order rate kinetics and the rate of oxidation of H-acid was higher than the other dyes. Release of chloride and sulfate from the Fenton's treated Red M5B dye and sulfate from H-acid and Blue MR indicates that the dye degradation proceeds through cleavage of the substituent group.     

Photocatalytic degradation of gaseous perchloroethylene: products and pathway

Batch photocatalytic degradation of 1000-ppm gaseous perchloroethylene (PCE) was conducted with UV irradiation such that nearly 100% was decomposed within 10 min. The main intermediate and final product were identified as trichloroacetylchloride (TCAC) and hydrogen chloride (HCl), respectively, and minor ones as dichloroacetic acid (DCAC), monochloroacetic acid (MCAC), carbon tetrachloride, chloroform, and phosgene. More than 90% of Cl- equivalent, i.e., the sum of the chlorine number in PCE, intermediates, and HCl, was compensated for during the time of PCE degradation; a result indicating that no other major chlorinated intermediates are present during the time of PCE degradation. In a similar experiment, 500 ppm of gaseous TCAC degraded into HCl within 3 h without producing DCAC or MCAC, where like PCE, more than 90% of Cl- equivalent, i.e., the sum of the chlorine number in TCAC and HCl, was compensated for during time of TCAC degradation. Accordingly, gaseous PCE is concluded to predominantly follow a degradation pathway of PCE --> TCAC --> HCl.     

Teratologic assessment of maleic hydrazide and daminozide,and formulations of ethoxyquin,thiabendazole and naled in rats

Abstract

Teratogenicity studies were conducted in rats treated orally from days 6–15 of gestation with single daily doses of 400–1600 mg/kg of maleic hydrazide, 300–1000 mg/kg daminozide, 125–500 mg/kg ethoxyquin or thiabendazole, or 25–100 mg/kg naled. Dams were killed on the 22nd day of gestation, and fetuses were evaluated by routine teratologic methods. No adverse effect was related to any treatment other than an increased incidence of anomalous fetuses at the highest dose (500 mg/kg) of thiabendazole.     

Treatment of phenol-containing wastewater by photoelectro-Fenton method using supported nanoscale zero-valent iron

This study presents the degradation of phenol by the photoelectro-Fenton method using nano zero-valent iron (nZVI) immobilized in polyvinyl alcohol–alginate beads. The effect of nZVI loading, H₂O₂ concentration, pH, and initial phenol concentration on phenol degradation and chemical oxygen demand reduction was studied. The scanning electron microscope images of the nZVI beads were used to analyze their morphology, and their diameters were in the range of 500–600 μm. The concentration of nZVI in the beads was varied from 0.1 to 0.6 g/L. Fe²⁺ leakage of 1 and 3 % was observed with 0.5 and 0.6 g/L of nZVI, respectively, and the observed beads' fracture frequency was 2 %, which confirmed the stability of the beads. The optimum operating conditions that arrived for better degradation were 0.5 g/L of nZVI, pH 6.2, and 400 mg H₂O₂/L. The treatment of effluent by this method increased the biodegradability index of the effluent, and the degradation data were found to follow pseudo first-order kinetics.     

微波辅助光催化降解高浓度活性黑

利用改装的家用微波炉、微波无极灯和TiO2催化剂研究了水中高浓度活性黑的光催化降解.系统考察了TiO2投加量、pH、微波无极灯数量对微波辅助光催化处理效果的影响,得出微波辅助光催化的最佳操作条件,并在最佳条件下对活性黑的脱色及矿化效果进行研究.结果表明,TiO2投加量存在最佳值2 g/L,降低pH和增加微波无极灯数量均可提高活性黑的降解率.在TiO2的投加量为2 g/L,pH =3,微波无极灯数量为3的最佳光催化条件下,400 mg/L的活性黑溶液反应180 min时可实现完全脱色,反应300 min时,TOC去除率高达89.1％.     

Degradation and sorption of imidacloprid in dissimilar surface and subsurface soils

Degradation and sorption/desorption are important processes affecting the leaching of pesticides through soil. This research characterized the degradation and sorption of imidacloprid (1-[(6-chloro-3-pyridinyl)-methyl]-N-nitro-2-imidazolidinimine) in Drummer (silty clay loam) and Exeter (sandy loam) surface soils and their corresponding subsurface soils using sequential extraction methods over 400 days. By the end of the incubation, approximately 55% of imidacloprid applied at a rate of 1.0 mg kg^?1 degraded in the Exeter sandy loam surface and subsurface soils, compared to 40% of applied imidacloprid within 300 days in Drummer surface and subsurface soils. At the 0.1 mg kg^?1 application rate, dissipation was slower for all four soils. Water-extractable imidacloprid in Exeter surface soil decreased from 98% of applied at day 1 to > 70% of the imidacloprid remaining after 400 d, as compared to 55% in the Drummer surface soil at day 1 and 12% at day 400. These data suggest that imidacloprid was bioavailable to degrading soil microorganisms and sorption/desorption was not the limiting factor for biodegradation. In subsurface soils > 40% of ¹⁴C-benzoic acid was mineralized over 21 days, demonstrating an active microbial community. In contrast, cumulative ¹⁴CO₂ was less than 1.5% of applied ¹⁴C-imidacloprid in all soils over 400 d. Qualitative differences in the microbial communities appear to limit the degradation of imidacloprid in the subsurface soils.     

Degradation and sorption of imidacloprid in dissimilar surface and subsurface soils

Degradation and sorption/desorption are important processes affecting the leaching of pesticides through soil. This research characterized the degradation and sorption of imidacloprid (1-[(6-chloro-3-pyridinyl)-methyl]-N-nitro-2-imidazolidinimine) in Drummer (silty clay loam) and Exeter (sandy loam) surface soils and their corresponding subsurface soils using sequential extraction methods over 400 days. By the end of the incubation, approximately 55% of imidacloprid applied at a rate of 1.0 mg kg(-1) degraded in the Exeter sandy loam surface and subsurface soils, compared to 40% of applied imidacloprid within 300 days in Drummer surface and subsurface soils. At the 0.1 mg kg(-1) application rate, dissipation was slower for all four soils. Water-extractable imidacloprid in Exeter surface soil decreased from 98% of applied at day 1 to >70% of the imidacloprid remaining after 400 d, as compared to 55% in the Drummer surface soil at day 1 and 12% at day 400. These data suggest that imidacloprid was bioavailable to degrading soil microorganisms and sorption/desorption was not the limiting factor for biodegradation. In subsurface soils > 40% of (14)C-benzoic acid was mineralized over 21 days, demonstrating an active microbial community. In contrast, cumulative (14)CO(2) was less than 1.5% of applied (14)C-imidacloprid in all soils over 400 d. Qualitative differences in the microbial communities appear to limit the degradation of imidacloprid in the subsurface soils.     

Degradation of tetracycline at a boron-doped diamond anode: influence of initial pH,applied current intensity and electrolyte

The anodic oxidation of tetracycline was performed in an up-flow reactor, operating in batch mode with recirculation, using as anode a boron-doped diamond electrode. The influence on the degradation rate of solution initial pH (2 to 12), applied current intensity (25 to 300 A m^?2) and type of electrolyte (sodium sulphate or sodium chloride) were investigated. For the assays run at equal current density, with sodium sulphate as electrolyte, the solution’s initial pH of 2 presented the highest absorbance and chemical oxygen demand removals. Regarding the influence of current density, for equal charge passed, the organic load removal rate decreased with the increase in applied current. When sodium sulphate was used as an electrolyte, high-performance liquid chromatography (HPLC) results have shown an almost complete removal of tetracycline after a 2-h assay. HPLC results have also shown the presence of oxamic acid as one of the intermediates of tetracycline anodic oxidation. The complete removal of tetracycline was much faster in the presence of chloride ions that promoted the complete degradation of this antibiotic in 30 min. However, in the presence of chloride ions, the tetracycline mineralization is slower, as observed by the lower organic carbon removal rate when compared to that of the tetracycline degradation in the presence of sulphate.     

Integration of a nonmetallic electrostatic precipitator and a wet scrubber for improved removal of particles and corrosive gas cleaning in semiconductor manufacturing industries

To remove particles in corrosive gases generated by semiconductor industries, we have developed a novel non-metallic, two-stage electrostatic precipitator (ESP). Carbon brush electrodes and grounded carbon fiber-reinforced polymer (CFRP) form the ionization stage, and polyvinyl chloride collection plates are used in the collection stage of the ESP The collection performance of the ESP downstream of a wet scrubber was evaluated with KC1, silica, and mist particles (0.01-10 pm), changing design and operation parameters such as the ESP length, voltage, and flow rate. A long-term and regeneration performance (12-hr) test was conducted at the maximum operation conditions of the scrubber and ESP and the performance was then demonstrated for 1 month with exhaust gases from wet scrubbers at the rooftop of a semiconductor manufacturing plant in Korea. The results showed that the electrical and collection performance of the ESP (16 channels, 400x400 mm2) was maintained with different grounded plate materials (stainless steel and CFRP) and different lengths of the ionization stage. The collection efficiency of the ESP at high air velocity was enhanced with increases in applied voltages and collection plate lengths. The ESP (16 channels with 100 mm length, 400x400 mm2x540 mm with a 10-mm gap) removed more than 90% of silica and mistparticles with 10 and 12 kV applied to the ESPat the air velocity of 2 m/s and liquid-to-gas ratio of 3.6 L/m3. Decreased performance after 13 hours ofcontinuous operation was recovered to the initial performance level by 5 min of water washing. Moreover during the 1-month operation at the demonstration site, the ESP showed average collection efficiencies of 97% based on particle number and 92% based on total particle mass, which were achieved with a much smaller specific corona power of 0.28 W/m3/hr compared with conventional ESPs.     

Enhanced mercuric chloride adsorption onto sulfur-modified activated carbons derived from waste tires

A number of activated carbons derived from waste tires were further impregnated by gaseous elemental sulfur at temperatures of 400 and 650 degrees C, with a carbon and sulfur mass ratio of 1:3. The capabilities of sulfur diffusing into the micropores of the activated carbons were significantly different between 400 and 650 degrees C, resulting in obvious dissimilarities in the sulfur content of the activated carbons. The sulfur-impregnated activated carbons were examined for the adsorptive capacity of gas-phase mercuric chloride (HgC1) by thermogravimetric analysis (TGA). The analytical precision of TGA was up to 10(-6) g at the inlet HgCl2 concentrations of 100, 300, and 500 microg/m3, for an adsorption time of 3 hr and an adsorption temperature of 150 degrees C, simulating the flue gas emitted from municipal solid waste (MSW) incinerators. Experimental results showed that sulfur modification can slightly reduce the specific surface area of activated carbons. High-surface-area activated carbons after sulfur modification had abundant mesopores and micropores, whereas low-surface-area activated carbons had abundant macropores and mesopores. Sulfur molecules were evenly distributed on the surface of the inner pores after sulfur modification, and the sulfur content of the activated carbons increased from 2-2.5% to 5-11%. After sulfur modification, the adsorptive capacity of HgCl2 for high-surface-area sulfurized activated carbons reached 1.557 mg/g (22 times higher than the virgin activated carbons). The injection of activated carbons was followed by fabric filtration, which is commonly used to remove HgCl2 from MSW incinerators. The residence time of activated carbons collected in the fabric filter is commonly about 1 hr, but the time required to achieve equilibrium is less than 10 min. Consequently, it is worthwhile to compare the adsorption rates of HgCl2 in the time intervals of < 10 and 10-60 min.     

Anaerobic degradation of microcrystalline cellulose: kinetics and micro-scale structure evolution

The degradation kinetics and micro-scale structure change of microcrystalline cellulose during anaerobic biodegradation were investigated. A modified Logistic model was established to properly describe the kinetics, which showed good fitness and wide applicability for cellulose degradation. A maximum degradation rate of 0.14 g L⁻¹ h⁻¹ was achieved after cultivating for 51.5 h. This result was in good agreement with the scanning electron microscope and X-ray diffraction analysis. Channels of 400-500 nm size started to occur on the crystalline surface of cellulose at around the inflexion time. Accordingly, the crystallinity significantly decreased at this point, indicating a degradation of the crystalline structure zones by anaerobic bacteria. This study offers direct morphological evidence and quantitative analysis of the biodegradation process of cellulose, and is beneficial to a better understanding of the cellulose degradation mechanism.     

紫外光助臭氧化处理活性艳红K-2BP废水研究

以 30 0W高压汞灯为光源 ,研究了紫外光联合臭氧化、单纯臭氧氧化及单纯紫外光照处理 4 0 0mg/L的活性艳红K 2BP废水的可行性。结果表明 :光催化臭氧化可加速有机物的矿化。在同样时间条件下 ,三者氧化能力由大至小为 :UV/O3 >单独O3 >单独UV。运用TOC、紫外 可见光谱 (UV Vis)、毛细管电泳 (CE)等分析技术初步探讨了紫外光催化臭氧化活性艳红K 2BP溶液的降解效果及降解机理。     

The behavior of PCDD and PCDF during thermal treatment of waste incineration ash

The polychlorinated dibenzo-p-dioxin (PCDD) and polychlorinated dibenzofuran (PCDF) content of three fly ash samples with different elemental compositions from different municipal waste incinerators were analyzed before and after thermal treatment at 300 °C or 500 °C. Gas phase emissions during the treatments were also collected and analyzed. Substantial reductions in the total PCCD/F content of the ashes were observed after treatment at 500 °C, seemingly due to degradation rather than dechlorination. Treatment at 300 °C resulted in an increase in the PCDD/F content of the three ashes. Initial concentration of PCDD/F in the untreated ashes did not reflect the outcome of the treatment at the different temperatures. In addition, the composition of the ash was found to influence the rate of decomposition and formation of PCDD and PCDF during thermal treatment; the results showed that Cu, Fe, Ca and S play important roles in these processes.     

Teratologic assessment of maleic hydrazide and daminozide, and formulations of ethoxyquin, thiabendazole and naled in rats

Teratogenicity studies were conducted in rats treated orally from days 6-15 of gestation with single daily doses of 400-1600 mg/kg of maleic hydrazide, 300-1000 mg/kg daminozide, 125-500 mg/kg ethoxyquin or thiabendazole, or 25-100 mg/kg naled. Dams were killed on the 22nd day of gestation, and fetuses were evaluated by routine teratologic methods. No adverse effect was related to any treatment other than an increased incidence of anomalous fetuses at the highest dose (500 mg/kg) of thiabendazole.     

Solubilization of municipal sewage waste activated sludge by novel lytic bacterial strains

Extracellular polymeric substances (EPS) are an extracellular matrix found in sludge which plays a crucial role in flocculation by interacting with the organic solids. Therefore, to enhance pretreatment of sludge, EPS have to be removed. In this study, EPS were removed with a chemical extractant, NaOH, to enhance the bacterial pretreatment. A lysozyme secreting bacterial consortium was isolated from the waste activated sludge (WAS). The result of density gradient gel electrophoresis (DGGE) analysis revealed that the isolated consortium consists of two strains. The two novel strains isolated were named as Jerish03 (NCBI accession number KC597266) and Jerish 04 (NCBI accession number KC597267) and they belong to the genus Bacillus. Pretreatment with these novel strains enhances the efficiency of the aerobic digestion of sludge. Sludge treated with the lysozyme secreting bacterial consortium produced 29 % and 28.5 % increase in suspended solids (SS) reduction and chemical oxygen demand (COD) removal compared to the raw activated sludge (without pretreatment) during aerobic digestion. It is specified that these two novel strains had a high potential to enhance WAS degradation efficiency in aerobic digestion.     

紫外光降解气态氯苯的影响因素及其动力学研究

紫外光降解挥发性有机物(VOCs)是一种新型的废气处理技术.采用主波长为365 nm的500 W高压汞灯为光源,重点考察了空塔停留时间、氯苯初始浓度、反应介质等对氯苯光降解效果的影响.结果表明,在氯苯初始浓度较低时.氯苯去除率随着空塔停留时间的延长而呈线性升高.最大去除率达87%;而氯苯初始浓度过高时会使单位分子接受的光子和活性基团数量下降,引起氯苯去除率降低,空气介质中的O2和H2O在光照下可转化为活性基团.进而增强了光降解效果;而在氮气介质下光降解氯苯的效率大大降低,最大去除率仅为61%.在氯苯为0.36～8.64 mg/L时,紫外光降解氯苯遵循二级反应动力学方程.     

颗粒活性炭深度处理抗生素废水

通过静态吸附实验,比较了13种不同材质、粒径的颗粒活性炭(granular activated carbon,GAC)对抗生素废水生化出水的吸附效果,选择KC16活性炭作为处理该废水的活性炭。KC16活性炭的进一步静态实验结果表明,当KC16活性炭投加量为30 g/L,吸附时间为6 h时,处理效果较好,TOC、COD、UV254、色度的去除率分别达到了86.99%、88.43%、89.69%和94.08%,并且污染物质(COD、TOC)的吸附符合Langmuir吸附等温式,吸附动力学符合准二级吸附动力学模型(R2>0.99)。动态吸附结果表明,在滤速为1.0 m/h,柱高为1 200 mm时,出水可以达到GB21903-2008《发酵类工业废水污染物排放标准》,处理每吨抗生素废水的活性炭用量为2.45 kg。     

Effects of N-acetyl-L-cysteine on fish hepatoma cells treated with mercury chloride and ionizing radiation

Organisms are exposed to natural radiations from cosmic or terrestrial origins. Furthermore the combined action of radiation with various chemicals is an inevitable feature of modern life. Radiation is known to cause cell death, mainly due to its ability to produce reactive oxygen species in cells. N-acetyl-l-cysteine (NAC) is a well-known sulfhydryl-containing antioxidant whose role in radioprotection has been reported. Synergistic effects of radiation and mercury chloride on human cells was previously reported by the authors. Based on the previous report, this study was designed to assess the synergistic effects of radiation and mercury chloride on fish hepatoma cells, as well as to investigate the protective effects of NAC on the cells. The cytotoxicity of radiation was enhanced in the presence of mercury chloride. NAC in lower concentrations prevented cells from death after irradiation with lower doses (<300 Gy) while it did not prevent cells from radiation-induced death after irradiation with higher doses (300, 500 Gy). The intracellular glutathione (GSH) levels significantly decreased after irradiation while the combined treatment of NAC and radiation alleviated the decrease in the GSH levels. The investigations give a clue for the action mechanism of synergistic or protective effects of NAC on the cells. Due to their high resistance to ionizing radiation, the PLHC-1 cells can be effectively used as a screening tool for assessing the combined effects of radiation with toxic chemicals.