The paradox of packaging optimization – a characterization of packaging source reduction in the Netherlands

The European Council Directive 94/62/EC for Packaging and Packaging Waste requires that Member States implement packaging waste prevention measures. However, consumption and subsequently packaging waste figures are still growing annually. It suggests that policies to accomplish packaging waste prevention do not suffice, especially since developments are less insightful as these are part of a self-declaring compliance system. This study is aimed at expanding the understanding of packaging source reduction. We collected and evaluated 131 available options implemented in the Netherlands in the period 2005–2010. Lightweighting has been identified as the most frequently applied packaging source reduction method, indicating that the packaging industry prioritizes low-effort and familiar concepts, despite the dichotomy in efficacy.     

Multi-objective optimization of waste and resource management in industrial networks – Part I: Model description

This article presents a general multi-objective mixed-integer linear programming (MILP) optimization model aimed at providing decision support for waste and resources management in industrial networks. The MILP model combines material flow analysis, process models of waste treatments and other industrial processes, life cycle assessment, and mathematical optimization techniques within a unified framework. The optimization is based on a simplified representation of industrial networks that makes use of linear process models to describe the flows of mass and energy. Waste-specific characteristics, e.g. heating value or heavy metal contamination, are considered explicitly along with potential technologies or process configurations. The systems perspective, including both provision of waste treatment and industrial production, enables constraints imposed upon the systems, e.g. available treatment capacities, to be explicitly considered in the model. The model output is a set of alternative system configurations in terms of distribution of waste and resources that optimize environmental and economic performance. The MILP also enables quantification of the improvement potential compared to a given reference state. Trade-offs between conflicting objectives are identified through the generation of a set of Pareto-efficient solutions. This information supports the decision making process by revealing the quantified performance of the efficient trade-offs without relying on weighting being expressed prior to the analysis. Key features of the modeling approach are illustrated in a hypothetical case. The optimization model described in this article is applied in a subsequent paper (Part II) to assess and optimize the thermal treatment of sewage sludge in a region in Switzerland.     

Water-holding capacity of earthworms’ vermicompost made of sugar industry waste (press mud) in mono- and polyculture vermireactors

Efforts were made to recycle sugar industry waste ‘press mud’ (PM) with an objective to ascertain the water-holding capacities with monoculture vermireactor systems using Eisenia fetida (MVR1); Eudrilus eugeniae (MVR2); Megascolex megascolex (MVR3); and polyculture vermireactor systems using Eisenia fetida + Eudrilus eugeniae (PVR1); Eisenia fetida + Megascolex megascolex (PVR2); Eudrilus eugeniae + Megascolex megascolex (PVR3). The vermicompost harvested after 40 days was subjected to a standard Proctor compaction test by using 3 kg industry soil and 200 g of vermicompost for each cycle of compaction up to seven cycles. The least dry density and highest water content 0.6, 170%; 0.66, 170%; 0.71, 170% and 0.52, 210%; 0.51, 180%; 0.71, 150% for vermicomposts of MVR3, MVR2, MVR1 and PVR3, PVR2, PVR1, respectively. The monoculture reactor using Megascolex megascolex can hold 110–170% and polyculture vermireactor using indigenous Megascolex megascolex + Eudrilus eugeniae (PVR3) can hold 140–210% of water under experimental conditions. The species Megascolex megascolex used individually and in combinations with Eudrilus eugeniae are best suited for biodegradation of press mud, and composts derived are having increase water-holding capacities. The addition of VC to the soil increases water-holding capacity and by maintaining evaporation losses to minimum as good adsorbent of atmospheric moisture eventually helps in maintaining the ecology of hydrologic cycle. Increasing water-holding capacity is one of the soil erosion control measures that influences soil productivity in both managed and natural ecosystems.     

Multi-objective optimization of waste and resource management in industrial networks – Part II: Model application to the treatment of sewage sludge

In the present article, the thermal treatment of digested sewage sludge generated in the Swiss region of Zürich is modeled and optimized from an environmental perspective. The optimization problem is solved using a multi-objective mixed-integer linear program that combines material flow analysis, process models, life cycle assessment (LCA), and mathematical optimization techniques. The treatment options include co-incineration in municipal solid waste incineration, co-processing in cement production, and mono-incineration with the prospect of phosphorus recovery. The model is optimized according to six environmental objectives. Five of the six single-objective optimal solutions involve splits over the treatment options. The results reflect the available treatment capacities and other constraints, aspects rarely considered in conventional LCA studies. Co-processing in cement production is used to the maximum extent possible when minimizing impacts on climate change, human toxicity, fossil resource depletion, and fully aggregated impacts (ReCiPe H/A), whereas mono-incineration with phosphorus recovery receives the bulk of the sludge when optimizing for ecotoxicity and mineral resource depletion. Four of the single-objective optimal solutions (minimization of fossil energy resource depletion and contribution to climate change, human toxicity, and fully aggregated impacts) outperform the reference case over the six impact categories considered, showing that the current situation can be improved in some environmental categories without compromising others. The results of the sensitivity analysis indicate that assumptions regarding the product systems displaced by recovered by-products are critical for the outcome of the optimization. Our approach identifies in all of the cases solutions in which significant environmental improvements can be attained.     

Design of a European agrochemical plastic packaging waste management scheme—Pilot implementation in Greece

Mismanagement of Agrochemicals Plastic Packaging Waste (APPW) constitutes a major environmental problem, resulting in the pollution of soil, air and water resources and compromising the agricultural products safety, the protection of the environment and the public health. Systems for the management of APPW have been established in some European countries and they are operational for several years now. However, these schemes are incompatible while their operational conditions and technical criteria could be improved. In many countries no schemes exist yet for the management of APPW with serious negative consequences for the environment and public health. In response to these problems the European project AgroChePack has developed an environmental friendly, economically viable European APPW management scheme by transferring know-how from existing schemes, designing a new integrated APPW management scheme and testing it through pilot trials in five countries. This work presents the basic design principles established by AgroChePack by identifying problems and bottlenecks faced by existing schemes in Europe, by developing an integrated APPW scheme and by implementing, evaluating and optimising this scheme through pilot trials in Greece.     

A multi-criteria decision analysis of solid waste treatment options in Pakistan: Lahore City—a case in point

Population of the world is increasing day by day, resulting in enormous amount of waste production. In the modern age of great technological advancements, there needs to be a systematic method to keep the environment clean. The waste management activities, i.e., collection, transport and disposal, pose a great challenge to the waste managers as they have to factor in various eclectic factors such as land availability, facilities available, budget, time required and the impact it would have on the environment, while tackling this problem. Lahore, despite being the most developed city of Pakistan, does not have a suitable solid waste management system. An increasing population leads to more waste generation, and in Lahore the situation is no different. Several waste management companies are working in the city, but as of yet they have not been able to make significant inroads to completely eradicate the problem. The aim of this paper is to suggest a suitable way for dealing with the waste. To accomplish this aim, a hierarchy-based model is used, considering six criteria and five alternatives. We used multi-criteria decision analysis to decide among different waste management alternatives. Forecasting has been used to find the population and waste produced over the years. Analytical hierarchy process (AHP) and Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) are used to rank the feasible alternative. The results show that the population and waste were increasing drastically. Aerobic digestion was ranked as the best alternative for waste management according to AHP and TOPSIS, but there is great variation among the rank of other alternatives.     

Can area managers connect policy and tenants? Implementation and diffusion of a new waste management system in Linköping,Sweden

Recycling and reducing household waste are political goals internationally, nationally and locally. In Sweden, households in apartment buildings seem to sort their waste to a lesser extent than households in single-family houses. This paper analyses the challenges of the diffusion of a new waste management system in apartment buildings, and focuses on a municipal housing company and the actions of its area managers. It is argued that area managers can be regarded as street-level bureaucrats who act as ‘collectors’ of tenants’ everyday practices in the studied implementation process. The study is based on interviews, document analysis and observations.     

Solid waste characterization,quantification and management practices in developing countries. A case study: Nablus district – Palestine

Solid waste management (SWM) is one of the most challenging issues faced by developing countries that suffer from serious pollution problems caused by the generation of large waste quantities. This paper presents the case study of SWM in the Nablus district – Palestine. Surveys for household residents' and SWM program operators, field investigations, on-site waste measurements and characterizations were conducted. Per capita waste generation rates varied between different localities although trends were similar. Overall, the majority of waste was organic (65.1% by weight), suggesting a strong resource recovery potential in terms of animal feed or compost. Recyclable waste (plastic, paper and card) made up 16.7% by weight the waste composition suggesting an incentive to introduce source separation. Household attitudes complemented the waste characterization study, revealing the main problems faced. SWM operators quoted on the current status, highlighting problems with disposing in unsanitary landfills, ineffective solid waste fees system, increasing solid waste quantities and lacking equipment and experienced personnel. To enhance sustainable SWM, public awareness, funding, expertise, equipment and facilities and other provisions currently lacking or inappropriate must be provided.     

Gifting,ridding and the “everyday mundane”: the role of class and privilege in food waste generation in Indonesia

Current research on household food waste has not considered the impact of the inter-class power dynamics between employers and domestic helpers on food waste management and generation in the Global South. This article focuses on the issue of food justice and will demonstrate that it is important to reconsider household food practices within the framework of unequal power dynamics in household units – especially between employers and their domestic helpers. Informed by food waste regime conceptual framework, this paper will examine the complex food provisioning practices of Indonesian households. The research draws on 21 in-depth interviews with households of varying incomes, multiple site visits, participant observation and going along on grocery trips to better understand the power dynamics and practices that result in, or prevent the generation of household food waste. In addition, 12 key informant interviews with government officials, traditional food vendors, supermarket managers, and a waste collector was also conducted. In an Indonesian context, understanding the interclass dynamics of the household, namely, who gets to define what is “food” and what is “waste” is key to understanding the broader phenomenon of food waste in order to promote solutions to food waste prevention and food insecurity that is socially and environmentally just.     

Impact of unconfined sulphur-mine waste on a semi-arid environment (Almería, SE Spain)

Thirty-five soil samples were taken from unconfined mine waste, stream sediments, and surfaces unoccupied by mining and presumably unaffected by it, in a sulphur-mining zone surrounded by carbonate material and characterized by a semi-arid climate with short torrential storms. These samples were analysed and the results compared to estimate the spread of pollution in the landscape and to assess potential environmental risk. The mean concentrations of S, Zn, Cd, Pb, and As in mine waste were between 3.5-fold (As) and 50-fold (S) greater than unaffected soils. Oxidation of S led to a sharp drop in pH, strong weathering of minerals, and solubilisation of the constituent elements, forming a toxic acidic mine drainage with highly concentrated pollutants that were discharged into the drainage channels. Successive acid mine drainage into the soil on the valley floor spreads acidification and pollution downstream. The high carbonate content in surrounding soils played an important role in the increase of the pH and precipitation of S, Pb, and Al of the affected soils. Meanwhile, high mobility of Zn, Cd and As under basic conditions and a low Fe concentration explain the broad spread of these elements, as high concentrations were detected in soil more than 2000 m from the source. Only the soil solutions from near the waste dump (first 500 m) were highly phytotoxic, and moderately phytotoxic from 500 to 1500 m away. The concentration of pollutants in the leachates was clearly higher than in soil solutions, even in the soils located over 2000 m from the source, implying that the size of the polluted area will increase with time.     

Removal of chromium(VI) from electroplating industry wastewater using bagasse fly ash—a sugar industry waste material

A waste product generated in the sugar industry in India has been converted into a cheap potential adsorbent. This has been characterised and utilized for the removal of chromium (VI) from synthetic and actual wastewater. The sorption efficiency decreases with increase in pH. Adsorption of Cr (VI) on bagasse fly ash follows the Freundlich and Langmuir isotherms and these have been used to obtain the thermodynamic parameters of the process. The sorption capacity of this adsorbent for chromium removal is found to be comparable to other low cost adsorbents.     

The use of bio-waste to revegetate eroded land areas in Ylläs,Northern Finland: Toward a zero waste perspective of tourism in the Finnish Lapland

Lapland is one of the most attractive nature-tourism areas in Europe, and tourism is vital for local economy. However, recreational tourist activities such as skiing, hiking and horse riding deteriorate the unique and vulnerable nature of Northern Finland. Erosion and wearing of tourist areas negatively affects biodiversity and ecosystem services and reduce the attractiveness of the region. Tourism is also the source of other environmental disturbances such as wastes. Currently, in Lapland, the prevalent waste treatment method is disposal, and wastes are transported over long distances due to lack of recipient facilities for waste management. The suggestion for sustainable waste management Scenario presented in this paper is to find a synergistic solution to both of these problems, by local treatment of bio-waste in an anaerobic digestor and utilization of digestate to revegetate eroded land. It is proposed that bio-waste is co-digested with sewage sludge and offal from slaughterhouses in Ylläs in the municipality of Kolari. An estimated 500–1000 t of digestate could be produced and used in tourist areas annually. Experiences from existing seasonal bio-waste collection schemes and interviews of local tourist enterprises and tourists indicate that there is willingness to extend the source separation of wastes. Assessment of the digestion Scenario suggests that economic costs of investment could be offset by avoided costs and by additional environmental and social benefits. It is concluded that this zero waste approach could lead to an improved image of Lapland as a sustainable tourist destination.     

Rebuilding others’ communities: a critical analysis of race and nativism in non-profits in the aftermath of Hurricane Katrina

The devastation of Hurricane Katrina and the federal levee failures facilitated the unprecedented proliferation of non-profits in some areas of the city. While the short- and moderate-term experiences of non-profits in the aftermath of Katrina have been examined, their long-term successes and failures remain unknown. In this paper we look at how race and nativism hindered the success of non-profits in rebuilding New Orleans. We likewise seek to demonstrate how the reactions on the part of non-profits to being the racial other or that of an outsider often further impeded the effectiveness of non-profits. The three authors, using data from participant observation, interviews, and ethnography, over a four-year period, describe generalisable lessons learned from rebuilding New Orleans’ communities, including the recognition of competing racial discourses in redevelopment; the valuing of local knowledge; and coming to terms with the paradoxes of the affect economy.     

Optimizing the treatment and disposal of municipal solid wastes using mathematical programming—A case study in a Greek region

Goal of the work is to present a simplified methodology to optimize an integrated solid waste management system. The methodology performs two optimizations, namely: (i) minimization of the total cost of the MSW system and (ii) minimization of the equivalent carbon dioxide emissions (CO_2e) generated by the whole system. The methodology is modeled via non-linear mathematical equations, uses 32 decision variables and does not require complex LCA databases. The proposed model optimally allocates eight MSW components (paper, cardboard, plastics, metals, glass, food wastes, yard wastes and other wastes) to four MSW management technologies (incineration, composting, anaerobic digestion, and landfilling) after source separation of recyclables has taken place. The Region of East-Macedonia and Thrace in Greece was selected as a case study. Results showed that there is a trade off between cost and CO_2e emissions. Incineration and composting were favored as the principal treatment technologies, while landfilling was always the least desirable management technology under both objective functions. The recycling participation rate significantly affected all optimum scenarios.     

The evolution of municipal waste management in Europe: how different are national regimes?

The 1994 European Directive on Packaging and Packaging Waste allowed a diversity of conceptions of waste management to be developed and tested in various countries. Such a diversity may raise drawbacks related to the achievement of the single market and the European law of competition. The paper describes the main differences in waste management regimes in five countries: France, Germany, the Netherlands, Italy and Greece. This comparative approach allows us, first, to identify four main variables in order to characterize policy regimes, explaining the degree of orientation of waste regimes to cost-effectiveness. Second, we will show that implementation has resulted, in each country, in learning, correction and self-regulation, thus reducing the initial divergences between national regimes. Hence, efficient harmonization of waste management regimes may be achieved unexpectedly in a soft way without passing stringent European directives. Moreover, if policy-makers were to adopt explicitly the option of experimenting with competing organizational and policy concepts, as an approach to European harmonization, it would reveal, by 2004, the cost-effectiveness of alternative solutions at a time when European policy has to be reconsidered. Copyright © 2001 John Wiley & Sons, Ltd.     

Wind energy and natural ventilation potential of a wind catcher in Yazd – Iran (a long-term measurement)

When designing energy efficient buildings it is useful to study existing climate—responsive building typologies. The wind towers or wind-catchers of Yazd city in Iran are typical examples of such a typology. Although many previous studies have investigated the performance of various types of wind catcher systems, studies based on a long-term real-life measurement can be rarely found. In this study a long-term whole year monitoring campaign on an existing full scale four sided wind catcher in Yazd was carried out in 2014–2015. Three prevailing wind directions were identified and the measured on-site wind speeds were used to estimate the wind induced natural ventilation potential of the tower. A shaft/tower airflow performance index was developed. The monitoring results were compared to the ASHRAE Standard 62:2001 ventilation rate requirement. Results show that the total ventilation rate of the wind tower surpasses the ASHRAE Standard requirements. Furthermore it shows that the shafts are exposed to the prevailing wind directions perform better. For more effective natural ventilation a wind tower with adaptable openings/shafts are proposed.     

Avança Brasil: Environmental and Social Consequences of Brazil's Planned Infrastructure in Amazonia

“Avança Brasil” (Forward Brazil) is a package of 338 projects throughout Brazil; the portion of the plan to be carried out in Brazil's Legal Amazon region totals US$43 billion over 8 years, US$20 billion of which would be for infrastructure causing environmental damage. Brazil's environmental impact assessment system is not yet capable of coping with the challenge presented by Avança Brasil. Generic problems with the licensing process include stimulation of a lobby in favor of construction before decisions are made on the advisability of the projects, the “dragging effect” of third parties, whereby economic activity is attracted to the infrastructure but escapes the environmental impact assessment system, a tendency for consulting firms to produce favorable reports, a bureaucratic emphasis on the existence of steps without regard to the content of what is said, and the inability to take account of the chain of events unleashed when a given project is undertaken.The environmental and social costs of forest loss are high; among them is loss of opportunities for sustainable use of the forest, including loss of environmental services such as biodiversity maintenance, water cycling, and carbon storage. The benefits of export infrastructure are meager, especially from the point of view of generating employment. Much of the transportation infrastructure is for soybeans, while the hydroelectric dams contribute to processing aluminum. The example of Avança Brasil makes clear the need to rethink how major development decisions are made and to reconsider a number of the plan's component projects.     

Is there a place for social capital in the psychology of health and place?

The field of environmental psychology is primely placed to further understanding of the way in which social capital influences or is influenced by the context and characteristics of neighbourhood environments, but has been one of the quieter voices in the cacophony of social capital discourse over the last decade. While there is increasing research interest in area and neighbourhood variations in social capital, the mechanisms and causal pathways through which physical environments, social capital and health may be related are not yet clear. More refined unpacking of the relationship between social capital and neighbourhood design, features and settings is required to identify practical intervention points for preserving, fostering and harnessing social capital within communities. Through a review of literature, this paper explores whether there is a place for social capital in the psychology of place and considers the contribution that environmental psychology and related disciplines could make to future social capital research and applications.     

Cloning and expression of α-amylase in E. coli: genesis of a superior biocatalyst for substrate-specific MFC

One of the most practical approaches for establishing a successful microbial fuel cell (MFC) is to fasten the oxidation rate of the substrate by the microorganisms to get quick paced electron transfer between microbes and electrode. A genetically modified Escherichiacoli, overexpressing α-amylase, is constructed and applied as biocatalyst in MFC using starch as substrate. The results are compared with nonrecombinant, native E.coli. The results show better performance for the MFC containing the recombinant strain demonstrated by higher power density (PD), lower resistance, and significant electrochemical activity. Maximum PD has been recorded as 279.04 mW m^?2 compared to 120.33 Mw m^?2 for the MFC operated with nonrecombinant E.coli. The impedance results also suggest the effectiveness of the recombinant strain by lowering the internal resistance by more than half order as compared to the nonrecombinant one. These results affirm that the engineered strain can be used as a superior biocatalyst in contrast to the native strain and by using the technique of genetic alteration; gene of interest can be inserted based on the substrate to be treated. So, this work gives a useful insight for accomplishing successful MFC operation with the use of bacterial stains engineered at the molecular level.     

Use of Ammophila arenaria for Dune Stabilization in South Africa and Its Current Distribution—Perceptions and Problems

Ammophila arenaria (marram or European beach grass) for dune stabilization in South Africa in the past and present, its present distribution in South Africa, and the perceptions of coastal management agencies and the public about its further use. The planting of A. arenaria became the most important means of dune stabilization, by human intervention, along the South African Cape coast in this century. Its modern distribution from the semiarid west coast to the subtropical shores of the Eastern Cape extends through various climatic zones. Although historical data are missing for some areas, there is no indication of its unaided spread. A. arenaria occurs at most sites because of its prior planting. The South African climate appears to affect its vigor. However, concern about the use of the alien grass has been raised since it has proved to be a highly invasive species in other parts of the world, particularly along the North American west coast and in Tasmania. While the CSIR (Council of Scientific and Industrial Research) promotes its use, CNC (Cape Nature Conservation) follows a policy that restricts the use of any alien plant, including A. arenaria, and requests further research on its invasive properties. Although a questionnaire survey shows that stabilization sites featuring large areas of A. arenaria are accepted by the South African public, current coastal management practices need to be analyzed critically. A thorough investigation of the potential invasiveness of A. arenaria on South African coastal dunes will be essential and shed new light on the American A. arenaria problem.