Indirect forced solar drying of banana slices: phenomenological explanation of non-isotropic shrinkage and color changes kinetics

Solar drying technology is a noteworthy technique as it uses the renewable solar energy. In this study, thin slices of banana were dried by using an indirect forced solar dryer at air mass flow rates of 0.016, 0.041, and 0.082 kg s^?1. In order to assess the kinetics of shrinkage and color changes, image processing technique was applied for determining area, volume, density, total color difference and browning index. Shrinkage factor of the samples was less than 1 during drying indicating non-isotropic shrinkage with contraction of inner voids. Furthermore, product shrinkage showed two descending drying steps in which the volume change was more than the evaporated water volume in the first step and equal to that in the second step. The dimensionless evaporated water volume with respect to the dimensionless volume difference of the product also revealed that two steps of volume change existed during drying separated at critical moisture ratio 0.23. The area and volume changes were only related to the product moisture content and were independent of the air mass flow rate, and hence air temperature. In contrary to the browning index, the total color difference was not influenced by air mass flow rate and the least change in browning index occurred at mass flow rate of 0.041 kg s^?1.     

CFD analysis on the performance of a solar chimney power plant system: Case study in Algeria

The solar chimney power plant (SCPP) is a power generator which uses solar radiation to increase the internal energy of the air circulating in the system, thereby transforming the useful gain of the solar collector into kinetic energy. The produced kinetic energy then can be converted into electrical energy by means of an appropriate turbine. In this paper, four locations in Algeria

(Constantine, Ouargla, Adrar, and Tamanrasset) were considered as case studies to describe the SCPP mechanism in detail. Numerical simulation of an SCPP which has the same geometrical dimensions was performed to estimate the power output of SCPP in these regions. Using the CFD software FLUENT we simulated a two-dimensional axisymmetric model of a SCPP with the standard k-ε turbulence model. The simulation results show that the highest power output produced monthly average value 68–73 KW over the year and the highest hourly power produced in June is around 109–113 KW.     

Techno-economic and environmental analysis of an integrated standalone hybrid solar hydrogen system to supply CCHP loads of a greenhouse in Iran

The techno-economic and environmental performance of hybrid solar hydrogen energy systems was investigated to provide combined cooling, heating and power (CCHP) demands of a standalone greenhouse in Iran to achieve sustainable agriculture based on an optimization procedure. From the environmental point of view, by deploying hybrid energy systems, 83%, to 100% of emissions can be avoided. Also a sensitivity analysis was performed on the hybrid energy systems in order to study the effect of major parameter variation on the systems justification. It was concluded that hybrid solar systems are economically competitive with conventional systems, for high solar intensity locations with high diesel fuel prices and decreased prices for PV and hydrogen storage technology.