Dissolution of resin acids, retene and wood sterols from contaminated lake sediments

The dissolution potency of hydrophobic resin acids (RAs), retene and wood sterols from sediments was studied. These wood extractives and their metabolites are sorbed from pulp and paper mill effluents to downstream sediments. With harmful components like these, sediments can pose a hazard to the aquatic environment. Therefore, sediment elutriates with water were produced under variable conditions (agitation rate and efficiency, time), and concentrations of the dissoluted compounds were analyzed. Both naturally contaminated field sediments and artificially spiked sediments were studied. By vigorous agitation RAs can be released fast from the sediment matrix and equilibrium reached within 3 days. Compared to RAs, desorption of retene from lake sediment was slower and did not completely reach equilibrium in 23 days. Sterols spiked to pristine sediment with a 33-day contact time desorbed faster than those associated authentically with industrial sediment of from a contaminated lake. Simulating the water turbulence adjacent to a sediment surface by low and high rate of agitation in the laboratory, an increase in the mixing rate after 43-day elutriation suddenly released a high amount of wood sterols. The results indicate wide variation between hazardous chemicals in their tendency to dissolution from sediment solids. Erosion and hydrology adjacent to the sediment surface, as well as risks from dredging activities of sediments, may expose lake biota to bioactive chemicals.     

The stability of butyltin compounds in a dredged heavily-contaminated sediment

A treatment process for marine sediment heavily contaminated with tributyltin (TBT) was designed that included dehydrating, sunlight drying and dumping processes. The time course in butyltin (BTs) compounds, TBT, dibutyltin (DBT) and monobutyltin concentrations were investigated in the sediment treated under various conditions (light (UV, sunlight and light exclusion), moisture (air-drying and water saturation) and wetting and drying cycles). Significant changes in all the BT compound concentrations with time were not found regardless of the sediment conditions for light and moisture. The results indicated the high stabilities of TBT and DBT in the sediments versus light and moisture condition changes, probably taking place in the treatment process. It is also estimated that the BTs in the sediment are resistant to photo-degradation and biochemical degradation and their half lives are relatively long. In contrast, the decreases in the TBT and DBT were observed during the wetting and drying cycle treatment for the water saturated sediment both during exposure to sunlight and under a dark condition. This result suggested the hypothesis that the TBT degradation could be accelerated by the high microbial activity induced by the moisture changing treatments.     

The use of anthracene as a model compound in a comparative study of hydrous pyrolysis methods for industrial waste remediation

Polycyclic aromatic hydrocarbons are very stable compounds and tend to bioaccumulate in the environment due to their high degree of conjugation and aromaticity. Hydrous pyrolysis is explored as a technique for the treatment of industrial water containing PAH, using anthracene as a model compound. The reactivity of anthracene under a range of temperatures and durations are studied in this paper. Aliquots of 1.0-10.0 mg of anthracene in a range of 1.0-5.0 mL of H₂O are subjected to hydrous pyrolysis under varied conditions of temperature, reagents and duration. The conditions include oxidising systems comprising distilled water, hydrogen peroxide and Nafion-SiO₂ solid catalyst in water; and reducing systems of formic acid and formic acid/Nafion-SiO₂/Pd-C catalysts to assess a range of redox reaction conditions. Oxygen in air played a role in some of the reaction conditions. Pyrolysed products were identified and quantified by the use of Gas Chromatography-Mass Spectrometry (GC-MS). The major products were anthrone, anthraquinone, xanthone from oxidation; and multiple hydro-anthracene derivatives from reductive hydogenation. The nature of reaction conditions influenced the extent of anthracene degradation. The products formed are more reactive (less stable) as compared to anthracene the starting material and will therefore be less persistent in the environment.     

Factors influencing organotin distribution in different marine environmental compartments, and their potential health risk

Tributyltin (TBT) and triphenyltin (TPT) in different marine environmental compartments such as seawater, sediments, and inshore fishes were investigated in 21 Taiwanese harbors between 2001 and 2004 in order to determine the major factors influencing their distribution. The existence of major input sources and the limited water exchange rate inside the harbors were indicated by higher TBT concentrations in seawater from inner harbor than from outer harbor areas. The levels of TBT in sediments were found to be mainly affected by their geographic distribution, water exchange rates and shipping activity. No significant correlations in TBT concentrations between water, sediment and fish suggested TBT accumulation by fish might not result from water and sediment, but from their food. TPT were detected in most fish samples, but found in few sediment samples and none in seawater, indicating fish could be as a target element for monitoring contaminated levels of TPT in the aquatic environment. Mean concentrations of TBT in fish muscle higher than tolerable average residue levels (TARLs), and mean hazard indices of TBT and TPT higher than 1 suggested consumption of fishes from Taiwanese harbor areas might have potential high risk to human health.     

Favourable interaction between photooxidation and bacterial degradation of anthracene in sea water

A mixed bacterial community isolated from a marine biotope highly polluted with hydrocarbons proved to be able to use anthraquinone, a product of anthracene photooxidation considered as a relatively stable molecule in a marine medium.     

Studies on degradation of 14C-chlorpyrifos in the marine environment.

Degradation of 14C-chlorpyrifos was studied in a marine ecosystem for 60 days and in marine sediment under moist and flooded conditions using a continuous flow system allowing a total 14C-mass balance for a period of 40 days. In the marine ecosystem, 14C-chlorpyrifos underwent rapid degradation and very little (1-2%) 14C-residues of the applied activity were detected after two months in sediments. Clams were major component of the ecosystem and played a significant role in degradation of the insecticide. In the continuous flow system chlorpyrifos did not undergo substantial mineralization. Volatilization accounted for 0.8-1% loss during first ten days of application. The amounts of extractable 14C-activity were higher in flooded sediments than in moist sediment. More bound residues were formed under moist conditions. TCP (3,5,6-trichloro-2-pyridinol) was the major degradation product formed under both moist and flooded conditions, its formation being higher in the latter conditions. These studies underline the role of clams in degradation of chlorpyrifos and lack of microbial degradation. In absence of clams, chlorpyrifos underwent abiotic degradation in marine sediment with formation of bound residues.     

城市富营养化水体底泥净化磷效果

以城市富营养化水体底泥和上覆水为材料,研究了扰动状态下底泥对外源磷的净化效果。结果表明,扰动状态下,200 g湿底泥从上覆水中共吸收外源磷19.92 mg,而静止状态下,200 g湿底泥仅吸收了13.61 mg。然而,厌氧状态下,前者内源磷释放量仅占吸收磷量的43%,而后者则高达63.4%。说明底泥扰动不仅强化了底泥对外源磷的吸收,而且也强化了内源磷的固定能力。这与扰动状态下外源磷在不同形态磷间的数量分布有关。底泥扰动和静止状态下,难释放态磷(HCl-P、闭蓄态Fe/Al-P)的增加量分别占底泥吸收外源磷量的36%和21%。     

Volatilization of contaminants from suspended sediment in a water column during dredging

Remedial dredging of contaminated bed sediments in rivers and lakes results in the suspension of sediment solids in the water column, which can potentially be a source for evaporation of hydrophobic organic compounds (HOCs) associated with the sediment solids. Laboratory experiments were conducted in an oscillating grid chamber to simulate the suspension of contaminated sediments and flux to air from the surface of the water column. A contaminated field sediment from Indiana Harbor Canal (IHC) and a laboratory-inoculated University Lake (UL) sediment, Baton Rouge, LA, were used in the experiments, where water and solids concentration and particle size distribution were measured in addition to contaminant fluxes to air. A transient model that takes into account contaminant desorption from sediment to water and evaporation from the water column was used to simulate water and sediment concentrations and air fluxes from the solids suspension. In experiments with both sediments, the total suspended solids (TSS) concentration and the average particle diameter of the suspended solids decreased with time. As expected, the evaporative losses were higher for compounds with higher vapor pressure and lower hydrophobicity. For the laboratory-inoculated sediment (UL), the water concentrations and air fluxes were high initially and decreased steadily implying that contaminant release to the water column from the suspended solids was rapid, followed by evaporative decay. For the field sediments (IHC), the fluxes and water concentrations increased initially and subsequently decreased steadily. This implied that the initial desorption to water was slow and that perhaps the presence of oil and grease and aging influenced the contaminant release. Comparison of the model and experimental data suggested that a realistic determination of the TSS concentration that can be input into the model was the most critical parameter for predicting air emission rates.     

Effects of storage method and duration on the toxicity of marine sediments to embryos of Crassostrea gigas oysters

The objective of laboratory sediment bioassays is to estimate in situ toxicity. This goal is difficult to achieve, as one of the main limitations of sediment toxicity tests is disruption of sediment geochemistry during sampling, handling and preservation. The effects of storage on the estimation of marine sediment toxicity to Crassostrea gigas embryos and larvae were investigated. Three storage methods and four storage periods were compared with three different sediment types contaminated by heavy metals, polycyclic aromatic hydrocarbons (PAHs) and both contaminants. Freezing and freeze-drying considerably increased the toxicity of decanted sediments and their elutriates as compared to the toxicity obtained with fresh sediments. Concerning the elutriates, the toxicity found with frozen and freeze-dried sediments was correlated with DOC, ammonia and PAH contents. However, the toxicity of fresh sediments kept at 4 degrees C increased with increasing duration of storage and was also correlated with the amount of ammonia in the elutriates.     

Resuspension of contaminated field and formulated reference sediments Part I: Evaluation of metal release under controlled laboratory conditions

In aquatic systems where metal contaminated sediments are present, the potential exists for metals to be released to the water column when sediment resuspension occurs. The release and partitioning behavior of sediment-bound heavy metals is not well understood during resuspension events. In this study, the release of Cd, Cu, Hg, Ni, Pb and Zn from sediments during resuspension was evaluated using reference sediments with known physical and chemical properties. Sediment treatments with varying quantities of acid volatile sulfide (AVS), total organic carbon (TOC), and different grain size distributions were resuspended under controlled conditions to evaluate their respective effects on dissolved metal concentrations. AVS had the greatest effect on limiting release of dissolved metals, followed by grain size and TOC. Predictions of dissolved concentrations of Cd, Ni, Pb and Zn were developed based on the formulated sediment Σ_metal/AVS ratios with Σ_metal being the total sediment metal concentration. Predicted values were compared to measured dissolved metal concentrations in contaminated field sediments resuspended under identical operating conditions. Metal concentrations released from the field sediments were low overall, in most cases lower than predicted values, reflecting the importance of other binding phases. Overall, results indicate that for sulfidic sediments, low levels of the study metals are released to the dissolved phase during short-term resuspension.     

Sorption-desorption behaviour of 2,4-dichlorophenol by marine sediments

Batch kinetic and isotherm experiments were conducted to determine the sorption-desorption behavior of 2,4-dichlorophenol from seawater solutions by marine sediments containing various amounts of organic carbon (from 1.02% to 12.72% dry weight). The results indicated linear type isotherms for sorption and desorption in all marine sediments studied. The observed difference in linear sorption coefficients between sorption and desorption was indicative of sorption hysteresis. The kinetic experiments showed that equilibrium was established in less than 20 h. The study is significant with respect to sediment remediation in contaminated harbors and coastal areas.     

Arsenic mobility in contaminated lake sediments

An arsenic contaminated lake sediment near a landfill in Maine was used to characterize the geochemistry of arsenic and assess the influence of environmental conditions on its mobility. A kinetic model was developed to simulate the leaching ability of arsenic in lake sediments under different environmental conditions. The HM1D chemical transport model was used to model the column experiments and determine the rates of arsenic mobility from the sediment. Laboratory studies provided the information to construct a conceptual model to demonstrate the mobility of arsenic in the lake sediment. The leaching ability of arsenic in lake sediments greatly depends on the flow conditions of ground water and the geochemistry of the sediments. Large amounts of arsenic were tightly bound to the sediments. The amount of arsenic leaching out of the sediment to the water column was substantially decreased due to iron/arsenic co-precipitation at the water-sediment interface. Overall, it was found that arsenic greatly accumulated at the ground water/lake interface and it formed insoluble precipitates.     

Land-based sources of marine pollution: organochlorine pesticides in stream systems

BACKGROUND: Organochlorine pesticides (OCPs) have been dispersed ubiquitously in the environment. Bottom sediments act as sinks for these compounds and their concentrations often reflect the degree of anthropogenic pollution. This study was designed to evaluate the occurrence and distribution of OCPs in superficial streambed sediments and their relation to land use in two creeks that contribute to the coastal pollution of the southeastern region of Argentina. METHODS: Sampling sites were selected by a combination of land use and stream type. Las Brusquitas creek, which passes through vast agricultural areas, and La Tapera creek which originates in a natural wetland and passes through horticultural farming and urban areas. OCPs quantification was carried out by GC-ECD. RESULTS AND DISCUSSION: Results showed similar total OCP concentrations in sediments from both creeks in the range of 6-25 ng/g dry wt. However, when OCPs were expressed in ng/g total organic carbon (TOC), La Tapera creek presented 4-fold higher total levels as a consequence of a higher OCP input during the recent past in that watershed. La Tapera outfall showed 4-fold higher levels than that seen in Las Brusquitas, although both values were below the sediment quality criteria demanded to protect wildlife. Sigmaendosulfans, sigmaDDTs and sigmachlordanes were the main OCP group in all samples, with Endosulfan sulfate being the most frequent and abundant compound. The predominance of metabolites with respect to parent compounds suggests a contamination mainly by runoff from aged and weathered agricultural soils. CONCLUSIONS: Despite OCPs being banned, they still exist in creek sediments from the studied region, representing continuous contributions of land-based source contaminants to the marine environment. OUTLOOK: Future research on OCP levels in suspended sediments is recommended in order to determine the total OCP concentrations in the selected stream systems.     

Persistent toxic substances in remote lake and coastal sediments from Svalbard, Norwegian Arctic: Levels, sources and fluxes

Surface sediments from remote lakes and coastal areas from Ny-Ålesund, Svalbard, Norwegian Arctic were analyzed for polycyclic aromatic hydrocarbons (PAHs), polybrominated diphenyl ethers (PBDEs), polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs). Relatively high levels of PAHs were encountered from several lakes from Ny-Ålesund, which were within the range of levels reported for European high mountain lakes and some urban/industrialized areas in the world, pointing to the role of remote Arctic lakes as potential reservoir of semi-volatile organic compounds. Specific patterns of PBDEs were observed, showing higher concentrations of lower brominated compounds such as BDE-7, 17 and 28. Estimated surface sediment fluxes of PAHs in Ny-Ålesund remote lakes were similar to those observed for some European high mountain lakes. The current PAH levels in sediments from three lakes exceeded Canadian sediment quality guidelines, suggesting the presence of possible risks for aquatic organisms and the need for further studies.     

Recolonization and succession of subtidal macrobenthic infauna in sediments contaminated with cadmium

Recolonization and succession of macrobenthic infauna in defaunated sediment contaminated with Cd were studied over a period of 14 months. Trays with defaunated sediment contaminated with cadmium, and trays with defaunated (control) sediment, were exposed at the subtidal in a subtropical environment. Macrobenthic succession exhibited different patterns in Cd-contaminated and control sediments. Abundance and species number were significantly higher in Cd-contaminated sediment during early succession, suggesting that cadmium may facilitate recolonization of certain species of macrobenthos. Cadmium also led to a significant change in species composition in initial colonization and subsequent succession. No significant difference in abundance, species number, diversity and species composition was found between Cd-contaminated and control sediments at the end of experiment, suggesting a stable benthic community was arrived within 14 months.     

Mathematical analysis of the whole core injection method accuracy for measuring phenanthrene biodegradation rates in undisturbed marine sediments

Rates of 14C-phenanthrene mineralization in contaminated, undisturbed marine sediments were measured using the whole core injection method to assess microbial natural attenuation activity as a function of sediment depth. Submerged sediments were sampled from Eagle Harbor, a marine superfund site in Puget Sound. Experiments show significant biodegradation activities (0.0012-0.0036 day(-1)) in the sediment horizons from 0 to 10 cm. The purpose and scope of this paper is to evaluate the range of experimental conditions giving valid results; a mathematical simulation described competing contaminant 14C-phenanthrene diffusion and simultaneous biodegradation (Monod kinetics), both retarded by sorption. The effect of aging was examined with two sorption models in presumed pseudo-homogenous sediments having effective properties. The simulation predictions provide quantitative guidelines for the successful use of the whole core injection method. (1) The effective Monod constant KS' in sediment is increased by a large partition coefficient KP between sediment and water and makes the apparent 14C-phenanthrene biodegradation approach first-order kinetics. (2) When KS'>1 mg(-1) l(-1), the measured 14C-phenanthrene biodegradation extent is biased by inadequately distributed injected tracer only when less than 7% of the sediment horizon is initially probed and mixed with injected tracer. (3) A short incubation time (<20 days) is necessary when a mobile indicator, e.g., gaseous 14CO2, is used. For longer incubation times, predictions show that a 14CO2 indicator diffuses to adjacent horizons, thus smearing the depth profile of biodegradation. (4) This method employing a radiolabeled tracer provides accurate biodegradation rates for freshly contaminated sediments, and represents an upper limit to the natural phenanthrene biodegradation extents if the contaminant is aged over 50 days.     

Variation in PAH inputs and microbial community in surface sediments of Hamilton Harbour: implications to remediation and monitoring

Variations in concentrations of polycyclic aromatic hydrocarbons (PAHs) and microbial community indicators were investigated in representative highly contaminated and less contaminated surface sediment sites of Hamilton Harbour. Inputs of PAH to the upper 3cm of sediments up to four times the average upper sediment concentrations were observed. Associated PAH fingerprint profiles indicated that the source was consistent with the PAH source to the industrial region of the harbour. Increased PAH loadings were associated with decreased bacterial populations as indicated by phospholipid fatty acid (PLFA) concentrations. However, relatively minor impacts on overall community composition were indicated. Porewater methane concentrations and isotopic data indicated a difference in the occurrence of methane oxidation between the two sites. This study confirms temporally limited transport of contaminants from highly impacted regions as a vector for contaminants within the harbour and the impact on microbial carbon cycling and bed stability.     

Assessment of adsorption behavior of dibutyltin (DBT) to clay-rich sediments in comparison to the highly toxic tributyltin (TBT)

The sorption behavior of dibutyltin (DBT) to four types of natural clay-rich sediments as a function of pH and salinity was studied. The strongest affinity of DBT was found to the montmorillonite-rich sediment, which is characterized by the highest specific surface area and cation exchange capacity of the four used sediments. Kd values range between 12 and 40 (l/kg) on simulated marine conditions (pH 8, salinity 32%). A maximum of DBT adsorption was found at a salinity of 0% and pH 6. Desorption occurred over the entire studied pH range (4-8) when contaminated sediments interact with butyltin-free water. The maximum of desorption coincided with the minimum of adsorption, and vice versa. The results of DBT adsorption are compared with tributyltin (TBT), and the mechanism of the adsorption process is discussed.     

Concentrations and profiles of PCDD/Fs in sediments of major Polish rivers and the Gdansk Basin--Baltic Sea

The present state of contamination of bottom sediments in southern part of the Baltic Sea with PCDD/Fs was compared to the findings made for the north-western and eastern Baltic Sea coastal areas of Finland, Sweden and Denmark. The extent of the study area--from marine the Gdańsk Basin, the lower Oder and Vistula Rivers up till W?oc?awek reservoir--allowed to obtain the sediment samples with diversified properties. Dioxin's concentrations in sediments examined in the Polish costal area allows us to evaluate this zone as relatively less contaminated. Higher dioxin concentration has been found in Wloclawek Dam Reservoir. Differences in congener patterns and temporal changes in marine sediment profiles were examined. The highest concentrations of tetra- and penta-congeners still remain in the surface layer of Gdansk Deep, whereas the decline in concentrations of these most toxic congeners, have been observed in the sediments from some other parts of the Baltic coast. Excess concentration of dioxins in sediments has a great impact on human being due to special ability of accumulation in the trophic chain as well as in water (fishes) and land (milk, meat).     

Metal availability in a highly contaminated, dredged-sediment disposal site: Field measurements and geochemical modeling

Two complementary approaches were used to characterize arsenic and metal mobilizations from a dredged-sediment disposal site: a detailed field study combined with hydrogeochemical modeling. Contaminants in sediments were found to be mainly present as sulfides subject to oxidation. Secondary phases (carbonates, sulfates, (hydr)oxides) were also observed. Oxidative processes occurred at different rates depending on physicochemical conditions and contaminant contents in the sediment. Two distinct areas were identified on the site, each corresponding to a specific contaminant mobility behavior. In a reducing area, Fe and As were highly soluble and illustrated anoxic behavior. In well-oxygenated material, groundwater was highly contaminated in Zn, Cd and Pb. A third zone in which sediments and groundwater were less contaminated was also characterized. This study enabled us to prioritize remediation work, which should aim to limit infiltration and long-term environmental impact.