Waste Management and Climate Change

Waste management has at least five types of impacts on climate change, attributable to: (1) landfill methane emissions; (2) reduction in industrial energy use and emissions due to recycling and waste reduction; (3) energy recovery from waste; (4) carbon sequestration in forests due to decreased demand for virgin paper; and (5) energy used in long-distance transport of waste: A recent USEPA study provides estimates of overall per-tonne greenhouse gas reductions due to recycling. Plausible calculations using these estimates suggest that countries such as the US or Australia could realise substantial greenhouse gas reductions through increased recycling, particularly of paper.     

Waste Management and Climate Change

Waste management has at least five types of impacts on climate change, attributable to: (1) landfill methane emissions; (2) reduction in industrial energy use and emissions due to recycling and waste reduction; (3) energy recovery from waste; (4) carbon sequestration in forests due to decreased demand for virgin paper; and (5) energy used in long-distance transport of waste: A recent USEPA study provides estimates of overall per-tonne greenhouse gas reductions due to recycling. Plausible calculations using these estimates suggest that countries such as the US or Australia could realise substantial greenhouse gas reductions through increased recycling, particularly of paper.     

Packaging glass contained in the heavy residual fraction refused by Portuguese Mechanical and Biological Treatment plants

Mechanical and Biological Treatment (MBT) is an important strategy to manage Municipal Solid Waste (MSW) in Europe. The presence of recyclable materials on MSW depends on different factors such as inefficiencies in the Municipal Solid Waste collecting schemes and to the low level of citizenship environmental education. Among other products, MBT plants produce a residual fraction, named here as heavy residual fraction, that contains a significant amount of packaging glass which in Portugal is currently landfilled. This material is not recycled because it is heavily contaminated with other materials, preventing its processing in Material Recovery Facilities (MRF).In this paper the characterization, including particle size and composition, of the residual fraction of six Portuguese MBT plants is presented. The relevant variables that determine the heavy residual fraction characteristics were identified. It was observed that the MBTr particle size distribution is different and depends mainly on the place on the flowsheet where the MBTr exits the process, which is determined by the type of biological process and by the aperture of the last screen where the product passes through. The content in glass varies from 33 to 83%. These values are mainly related with the upstream glass sorting and with the efficiency of the recovery of the organic fraction which is the glass main contaminant. The second main contaminant is “stones”.The quantity of glass contained in this product in all the plants that will be in operation in Portugal in 2014 was estimated. The work shows that if all the 48,000 of glass could be recovered the Portuguese recycling rate would increase by 4.4%.     

碳达峰碳中和目标下固体废物治理的法律因应

我国在联合国大会上提出了“2030年碳达峰2060年碳中和”的目标。为达成此目标,固体废物治理领域也需要积极作出响应。固体废物治理体系的核心是固体废物的处置。不同的固体废物处置方式有着不同的碳排放结果,填埋或焚烧方式处置所排放的温室气体量都远大于循环利用的方式。应以固体废物领域碳排放统一核算制度为基石,从推进政策实施和立法修改等的多个层面上去因应。立法面向上,《固体废物污染环境防治法》《清洁生产促进法》《循环经济促进法》乃至编纂中的“环境法典”都应当围绕减碳模式的固体废物处置方式改进和制定相关法律规范;制度建设面向上,以固体废物碳排放强制核算法律制度建设为主,通过碳排放强制核算制度规范相关主体及其权利义务关系并深度挖掘固体废物处置的碳减排潜力。     

Municipal solid waste management in South Africa: from waste to energy recovery through waste-to-energy technologies in Johannesburg

ABSTRACT

“Waste-to-energy” (WTE) technologies have been presented as one of the avenues to improve the management of solid waste whilst promoting clean and healthy urban environments through the recovery of waste and generation of energy. Research suggests that with the right investment in technologies and institutional changes, waste can potentially become a resource that can contribute to the socio-economic development of cities. It is in this context that this paper presents a review of the literature on WTE technologies and their implications on sustainable waste management in urban areas. The paper particularly contributes to our understanding of WTE technologies and its potential on Municipal Solid Waste Management (MSWM) in Johannesburg, South Africa. It is estimated that the city of Johannesburg’s landfills airspace will be completely depleted by year 2023. This projection becomes a motivation for the identification of suitable WTE alternative avenues to manage waste in the city. The paper argues that WTE technologies can contribute significantly to sustainable waste management, economic growth, ecological and environmental well-being.     

Potential energy production from organic waste and its environmental and economic impacts at a tertiary institution in Palestine

Municipal solid waste (MSW) is one of the most well-known biomass resources that can be utilized to produce renewable energy. Numerous countries are plagued by the proliferation of waste, particularly organic waste that can be utilized for energy recovery. Palestine suffers from inefficient solid waste management, and only recently have a few projects focused on bioenergy production been implemented. Throughout the years, the city of Tulkarm experiences power outages which cause a challenge to the Palestine Technical University-Kadoorie campus in Tulkarm. Thus, the possibility of energy recovery from the organic portion in Palestine Technical University-Kadoorie was evaluated. The analysis of an economic impact included discussions of a number of economic aspects, including Levelized cost of energy, internal rate of return, present worth, annual worth, and payback period. On the other hand, a carbon dioxide savings analysis and gas emission were evaluated. The outcomes of the energy optimization demonstrated that the suggested system could supply the institution with an average of roughly 7 MWh of electrical energy. According to the economic study, this project offers 0.25 million dollars in present value, 0.144 million dollars in annual value, a 13 percent internal rate of return, a payback period of 6 years, and a levelized cost of energy of 0.11 dollars for each kWh generated. Additionally, the environmental assessment revealed that this system might reduce CO₂ emissions by around 8,343,778 tons. For effective waste management, energy recovery, and emission reduction, it is advised to implement anaerobic digestion technology.     

钻井废物综合治理技术的应用

针对急需解决的钻井废水、废气治理问题,以钻井作业大功率柴油机废气余热回收利用为出发点,研制了钻井废水废气综合治理设备。通过现场试验对钻井废水、废气治理效果及噪声影响的分析,试验结果表明,日处理钻井废水可达11～13m3/d,柴油机废气中污染物排放有一定程度的降低,柴油机高频噪声得到较明显降低,并有利于增加柴油机扭距。     

深圳市南山区碳平衡测算研究

运用《省级温室气体清单编制指南》、《IPCC国家温室气体清单指南》和相关文献推荐方法,利用南山区能源消费数据、工业产品量、废弃物处理量、森林面积和海洋面积等基础数据,对南山区能源利用过程、工业生产过程和产品使用、废弃物处理等3大类碳源温室气体排放量以及区域森林(包括湿地)、城市绿地和海域等3大类碳汇储存量进行了测算,计算表明南山区年碳排放总量达到756.17万t,该测算为南山区未来区域碳减排提供基础数据依据。     

Alternative energy balances for Bulgaria to mitigate climate change

Alternative energy balances aimed to mitigate greenhouse gas (GHG) emissions are developed as alternatives to the baseline energy balance. The section of mitigation options is based on the results of the GHG emission inventory for the 1987–1992 period. The energy sector is the main contributor to the total CO₂ emissions of Bulgaria. Stationary combustion for heat and electricity production as well as direct end-use combustion amounts to 80% of the total emissions. The parts of the energy network that could have the biggest influence on GHG emission reduction are identified. The potential effects of the following mitigation measures are discussed: rehabilitation of the combustion facilities currently in operation; repowering to natural gas; reduction of losses in thermal and electrical transmission and distribution networks; penetration of new combustion technologies; tariff structure improvement; renewable sources for electricity and heat production; wasteheat utilization; and supply of households with natural gas to substitute for electricity in space heating and cooking. The total available and the achievable potentials are estimated and the implementation barriers are discussed.

     

有色金属行业CO2排放估算方法研究

通过对国内外有色金属行业温室气体排放估算方法研究现状的分析,将联合国政府间气候变化专门委员会(IPCC)温室气体排放清单指南、国际有色行业协会和环境科学研究中的一些常用算法,总结归纳应用于有色金属行业温室气体的排放量估算,从估算方法和结果上分析各种方法的优缺点和使用条件。以原铝生产CO2排放估算为例,对有色金属温室气体排放进行实证分析,为有色金属行业温室气体排放估算提供参选方法,促进有色金属工业的节能减排。     

我国炼化企业温室气体减排及CDM项目开展情况分析

我国炼化企业是高耗能高污染企业,温室气体排放量大而分散,减排潜力巨大。目前我国炼化企业比较重视废气的治理,如SOx,对于温室气体减排工作的研究投入力度相对较小,CDM项目很少且主要集中于N2O减排CDM项目。考虑到第一承诺期结束以后我国可能需要承担减排任务,单纯N2O减排将不能满足我国的温室气体减排需求。因此,我国炼化企业需要开展CO2减排技术研究。同时从节能减排及CO2资源化利用等方面对我国炼化企业进行分析,提出我国炼化企业节能减排措施,为我国炼化企业CO2减排提供理论依据。     

Techno-economic analysis and environmental impact assessment of energy recovery from Municipal Solid Waste (MSW) in Brazil

Due to the lack of appropriate policies in the last decades, 60% of Brazilian cities still dump their waste in non-regulated landfills (the remaining ones dump their trash in regulated landfills), which represent a serious environmental and social problem. The key objective of this study is to compare, from a techno-economic and environmental point of view, different alternatives to the energy recovery from the Municipal Solid Waste (MSW) generated in Brazilian cities. The environmental analysis was carried out using current data collected in Betim, a 450,000 inhabitants city that currently produces 200 tonnes of MSW/day. Four scenarios were designed, whose environmental behaviour were studied applying the Life Cycle Assessment (LCA) methodology, in accordance with the ISO 14040 and ISO 14044 standards. The results show the landfill systems as the worst waste management option and that a significant environmental savings is achieved when a wasted energy recovery is done. The best option, which presented the best performance based on considered indicators, is the direct combustion of waste as fuel for electricity generation. The study also includes a techno-economical evaluation of the options, using a developed computer simulation tool. The economic indicators of an MSW energy recovery project were calculated. The selected methodology allows to calculate the energy content of the MSW and the CH₄ generated by the landfill, the costs and incomes associated with the energy recovery, the sales of electricity and carbon credits from the Clean Development Mechanism (CDM). The studies were based on urban centres of 100,000, 500,000 and 1,000,000 inhabitants, using the MSW characteristics of the metropolitan region of Belo Horizonte. Two alternatives to recovering waste energy were analyzed: a landfill that used landfill biogas to generate electricity through generator modules and a Waste-to-Energy (WtE) facility also with electricity generation. The results show that power generation projects using landfill biogas in Brazil strongly depend on the existence of a market for emissions reduction credits. The WtE plant projects, due to its high installation, Operation and Maintenance (O&M) costs, are highly dependent on MSW treatment fees. And they still rely on an increase of three times the city taxes to become attractive.     

The role of electricity in sustainable development

Current projections estimating world population growth read in conjunction with corresponding projections of increased world energy consumption, point to electricity as the cleaner fuel of the future, especially because of its high efficiency and low levels of pollution. Due mostly to the fact that the electrical end-use devices are considerably more efficient than those using other forms of energy, most developed countries show decreasing curves of energy intensity as technologies become more sophisticated and shift over to increased reliance on electricity. It is therefore argued in this article that a gradual shift away from fossil fuels to electricity is a promising possibility to bring down global air pollution and emissions of greenhouse gases to acceptable levels. Examples are given of greater efficiency achieved by electrification. Overall gains in energy efficiency from the change over from fossil fuels to electricity, are possible even in situations where the electricity is generated by fossil fuel combustion, despite the loss of primary energy in the conversion process. The article also presents electricity generating projects designed for developing countries and countries with economies in transition. The generation of electricity from the combustion of renewable sources (biomass waste), fossil fuels, and other innovative methods are outlined.     

有色金属行业CO2排放估算方法研究

通过对国内外有色金属行业温室气体排放估算方法研究现状的分析,将联合国政府间气候变化专门委员会（IPCC）温室气体排放清单指南、国际有色行业协会和环境科学研究中的一些常用算法,总结归纳应用于有色金属行业温室气体的排放量估算,从估算方法和结果上分析各种方法的优缺点和使用条件。以原铝生产CO2排放估算为例,对有色金属温室气体排放进行实证分析,为有色金属行业温室气体排放估算提供参选方法,促进有色金属工业的节能减排。     

Greenhouse gas emissions in Canada and Japan: sector-specific estimates and managerial and economic implications

Many firms generate large amounts of carbon dioxide and other greenhouse gases when they burn fossil fuels in their production processes. In addition, production of raw materials and other inputs the firms procure for their operations also generates greenhouse gases indirectly. These direct and indirect greenhouse gas emissions occur in many sectors of our economies. In this paper, we first present sector-specific estimates for such greenhouse gas emissions. We then show that estimates for such sector-specific greenhouse gas emissions are often required for various types of corporate as well as public policy analyses in both domestic and international contexts. Measuring greenhouse gas emissions resulting from firms' multi-stage production processes in a multi-sector context is relevant for policies related to the Kyoto protocol, an international agreement to limit global greenhouse gas emissions. For example, since the protocol allows firms to engage in trading and offsetting of their greenhouse gas emissions across national borders, provided that emissions are correctly measured, the firms can take advantage of such trading schemes by placing their energy-intensive production facilities globally and strategically. We present several case studies which illustrate the importance of this and other aspects of greenhouse gas emissions in firms' environmental management. We also argue that our modeling and estimation methods based on input-output analyses are suitable for the types of research goals we have in this paper. Our methods are applied to data for Canada and Japan in a variety of environmental management circumstances.     

Greenhouse gas balance for composting operations

The greenhouse gas (GHG) impact of composting a range of potential feedstocks was evaluated through a review of the existing literature with a focus on methane (CH(4)) avoidance by composting and GHG emissions during composting. The primary carbon credits associated with composting are through CH(4) avoidance when feedstocks are composted instead of landfilled (municipal solid waste and biosolids) or lagooned (animal manures). Methane generation potential is given based on total volatile solids, expected volatile solids destruction, and CH(4) generation from lab and field incubations. For example, a facility that composts an equal mixture of manure, newsprint, and food waste could conserve the equivalent of 3.1 Mg CO(2) per 1 dry Mg of feedstocks composted if feedstocks were diverted from anaerobic storage lagoons and landfills with no gas collection mechanisms. The composting process is a source of GHG emissions from the use of electricity and fossil fuels and through GHG emissions during composting. Greenhouse gas emissions during composting are highest for high-nitrogen materials with high moisture contents. These debits are minimal in comparison to avoidance credits and can be further minimized through the use of higher carbon:nitrogen feedstock mixtures and lower-moisture-content mixtures. Compost end use has the potential to generate carbon credits through avoidance and sequestration of carbon; however, these are highly project specific and need to be quantified on an individual project basis.     

云南省城市生活垃圾处理温室气体排放特征

根据《IPCC国家温室气体清单指南》和《省级温室气体清单编制指南》方法,建立2018年云南省16个州(市)城市生活垃圾处理温室气体排放清单,包括生活垃圾填埋和焚烧处理过程,并分析了温室气体排放的时间分布、空间分布和影响因素等。结果表明;(1)2018年云南省生活垃圾处理温室气体总排放量为536万t CO_2当量,各州(市)间排放量差异明显,滇中经济发达地区和滇东北人口密度较高地区排放量明显高于滇西北地区。(2)2005—2018年,云南省生活垃圾处理排放的温室气体量增长了191.3%,温室气体排放组成发生明显变化,CH4比重不断下降,CO_2比重不断增加。(3)城镇人口数量、生活垃圾处理量、经济发展水平与温室气体排放量显著相关,其中人口数量更为明显。     

Using coal for transportation in China: Life cycle GHG of coal-based fuel and electric vehicle,and policy implications

This paper compares the GHG emissions of coal-to-liquid (CTL) fuels to the GHG emissions of electric vehicles (EVs) powered with coal-to-electricity in China. A life cycle model is used to account for full fuel cycle and use-phase emissions, as well as vehicle cycle and battery manufacturing emissions. It is found that the reduction of life cycle GHG emissions of EVs charged by electricity generated from coal, without utilizing carbon dioxide capture and storage (CCS) technology can be 3–36% when compared to petroleum-based gasoline car. The large range in emissions reduction potential is driven by the many different power generation technologies that are and could in the future be used to generate electricity in China. When CCS is employed in power plants, the GHG emission reductions increase to 60–70% compared to petroleum-based gasoline car. However, the use of coal to produce liquid transportation fuels (CTL fuels) will likely lead to significantly increased life cycle GHG emissions, potentially 30–140% higher than petroleum-based gasoline. When CCS is utilized in the CTL plant, the CTL fueled vehicles emit roughly equal GHG emissions to petroleum-based gasoline vehicles from the life cycle perspective. The authors conclude that policies are therefore needed in China in order to accelerate battery technology and infrastructural improvements for EV charging, increased energy efficiency management, and deployment of low-carbon technologies such as CCS.     

Structural and technological changes of greenhouse gas emissions during the transition period in Polish industry

We analyzed the patterns of energy use and greenhouse gas (GHG) emissions in Polish industry arising during the transition from a centrally planned economy to a market economy. A method of analyzing industry energy use and GHG emissions is discussed. Using this method, the impact of changes in industrial production value, the share of specific industry branches in the total industrial production, energy intensity, and the mix of the energy carriers in the 1989–1993 period has been analyzed. The last year of the analyzed period shows favorable trends in efficiency and signs of production structure shift to a less energy-intensive one. Economic reform implemented after 1989, which released energy carriers' prices from government control, had important effects on the industrial sector. Energy efficiency and emission intensity trends of 1992–1994 were favorable; if they continue, production will return to 1989 levels with much lower energy consumption and significantly decreased GHG emissions.

     

The potential contribution of sustainable waste management to energy use and greenhouse gas emission reduction in the Netherlands

Future limitations on the availability of selected resources stress the need for increased material efficiency. In addition, in a climate-constrained world the impact of resource use on greenhouse gas emissions should be minimized. Waste management is key to achieve sustainable resource management. Ways to use resources more efficiently include prevention of waste, reuse of products and materials, and recycling of materials, while incineration and anaerobic digestion may recover part of the embodied energy of materials. This study used iWaste, a simulation model, to investigate the extent to which savings in energy consumption and CO₂ emissions can be achieved in the Netherlands through recycling of waste streams versus waste incineration, and to assess the extent to which this potential is reflected in the LAP2 (currently initiated policy). Three waste streams (i.e. household waste, bulky household waste, and construction and demolition waste) and three scenarios compare current policy to scenarios that focus on high-quality recycling (Recycling+) or incineration with increased efficiency (Incineration+). The results show that aiming for more and high-quality recycling can result in emission reductions of 2.3 MtCO₂ annually in the Netherlands compared to the reference situation in 2008. The main contributors to this reduction potential are found in optimizing the recycling of plastics (PET, PE and PP), textiles, paper, and organic waste. A scenario assuming a higher energy conversion efficiency of the incinerator treating the residual waste stream, achieves an emission reduction equivalent to only one third (0.7 MtCO₂/year) of the reduction achieved in the Recycling+ scenario. Furthermore, the results of the study show that currently initiated policy only partially realizes the full potential identified. A focus on highest quality use of recovered materials is essential to realize the full potential energy and CO₂ emission reduction identified for the Netherlands. Detailed economic and technical analyses of high quality recycling are recommended to further evaluate viable integrated waste management policies.