Facile Preparation of Chitin/Cellulose Composite Films Using Ionic Liquids

In this study, we performed the facile preparation of chitin/cellulose composite films using two ionic liquids, 1-allyl-3-methylimidazolium bromide (AMIMBr) and 1-butyl-3-methylimidazolium chloride (BMIMCl); the former dissolves chitin and the latter dissolves cellulose. First, solutions of chitin in AMIMBr and cellulose in BMIMCl were individually prepared by heating each mixture at 100 °C for 24 h. Then, the homogeneous mixture of the two solutions was thinly casted on a glass plate, followed by standing at room temperature for 2 h. After the material was subjected to successive Soxhlet extractions with ethanol for 12 h and with water for 12 h, the residue was dried at room temperature to give a composite film. The crystalline structures of the polysaccharides were evaluated by the X-ray diffraction measurement. Furthermore, the thermal stability and mechanical property of the resulting composite film were estimated by the thermal gravimetric analysis measurement and tensile testing, respectively.     

Preparation,Characterization and Properties of a Novel Electrospun Polyamide-6/ Chitosan/Graphene Oxide Composite Nanofiber

Journal of Polymers and the Environment - Chitosan (CS) is a natural biopolymer that due to its excellent properties such as biocompatibility and biodegradability is suitable for use in many...     

Preparation of Chitin/Cellulose Films Compatibilized with Polymeric Ionic Liquids

This paper reports the preparation of chitin/cellulose films compatibilized with polymeric ionic liquids. In-situ (co)polymerization of polymerizable ionic liquids, 1-(3-methacryloyloxypropyl)-3-vinylimidazolium bromide (1) and 1-methyl-3-vinylbenzylimidazolium chloride (3), was carried out in the presence of a radical initiator, AIBN, in the chitin/cellulose solution with ionic liquid solvents (1-butyl-3-methylimidazolium acetate and chloride, BMIMOAc and BMIMCl, respectively), followed by the appropriate procedure to give the desired films. The presence of the polymeric ionic liquid in the film was confirmed by the IR measurement. The powder X-ray diffraction analysis suggested that crystalline structures of the polysaccharides were largely disrupted in the film, as same as that of a chitin/cellulose film prepared by the AMIMOAc/BMIMCl system. These results were different from the XRD result of a chitin/cellulose film prepared by the 1-allyl-3-methylimidazolium bromide/BMIMCl system reported in our previous study, in which some crystalline structures were still remained in the film. Furthermore, the mechanical properties of the present films were evaluated by tensile testing, which were affected by the molar ratios of the polymeric ionic liquids to the polysaccharides and the compositional ratios of the two units 1 and 3.     

阳离子聚丙烯酰胺-TiO2复配絮凝剂的合成及性能

以甲基丙烯酰氧乙基三甲基氯化铵(DMC)和丙烯酰胺(AM)为单体,K2S2O8-NaHSO3为引发剂,采用水溶液聚合法合成了阳离子聚丙烯酰胺P(DMC-AM),将表面处理后的纳米TiO2与P(DMC-AM)复配,得到P(DMC-AM)-TiO2复配絮凝剂.考察了原料配比、反应条件对P(DMC-AM)黏度的影响,结果表明:在m(DMC):m(AM)=0.18、引发剂加入量为0.5%(质量分数,下同)、聚合反应时间3 h、聚合溶液pH=4.0条件下,P(DMC-AM)絮凝剂的特性黏度最佳;纳米TiO2加入量为5%时,复配絮凝剂对酸性黑10B染料模拟废水的脱色性能最好.     

Some Investigations on the Nylon 6/Zn Composite Material Obtained by Simultaneous Anionic Polymerization-Molding Process

This study is concerned with the behavior of samples based on nylon 6/zinc (Ny6/Zn) composite material in high salinity water that contains NaCl (3.5 wt%) and in aqueous solution of HCl (0.5 N and 1 N). The samples were obtained from parts prepared by in situ anionic ring-opening polymerization of ?-caprolactam (CL) in the presence of zinc (Zn), as filler (15 wt%) using the rotational molding technique. This type of composite was evaluated by the testing of swelling degree, structural modifications, evolution of hydrogen and electrochemical behavior. The properties of Ny6/Zn composite material have ascertained through the combined use of more analysis methods: attenuated total reflectance Fourier transform infrared spectroscopy, wide-angle X-ray diffraction technique, scanning electron microscopy, swelling and electrochemical measurements. It was revealed that regarding swelling behavior the Ny6 matrix has an important role while Zn filler contributes especially to the (electro)chemical corrosion.     

交联壳聚糖/沸石复合吸附剂的制备及性能

用沸石负载由缩水甘油基三乙基氯化铵交联的壳聚糖,制得了性能良好的交联壳聚糖/沸石复合吸附剂。研究了该吸附剂应用性能的影响因素,探讨了该吸附剂的吸附性、沉降性和重复使用性,利用FTIR仪和高倍透射电子显微镜对该吸附剂的结构进行了表征。实验结果表明:壳聚糖的交联度为0.93、交联壳聚糖与沸石的质量比为0.045时,制得的交联壳聚糖/沸石复合吸附剂对腐殖酸的去除率可达81.4%,吸附量为4.07mg/g;交联壳聚糖/沸石复合吸附剂对腐殖酸的吸附性能较沸石有显著提高,沉降时间较交联壳聚糖明显缩短;经二次洗脱后腐殖酸去除率仍可达80.2%,腐殖酸吸附量为4.01mg/g。     

Preparation of Cationic Asphalt Emulsifier from Cyclohexanone Wastewater

以环己酮生产废水(以下简称废水)为溶剂,以木质素、三乙烯四胺及甲醛为原料,通过Mannich反应制备了阳离子沥青乳化剂木质素胺.实验结果表明,制备木质素胺的最佳工艺条件为:反应温度85℃,反应时间5h,n(甲醛)∶n(三乙烯四胺)=3.0.经FTIR表征,以废水为溶剂和以去离子水为溶剂所制备的木质素胺结构相同.以实验制备的木质素胺为乳化剂制成的乳化沥青的性能指标达到JTG E20-2011《公路工程沥青及沥青混合料试验规程》的指标.     

阳离子聚丙烯酰胺絮凝剂的制备及其絮凝性能

研究了丙烯酰胺（AM）与丙烯酰氧乙基三甲皋氯化铵共聚反应制备阳离子聚丙烯酰胺絮凝剂的工艺。实验结果表明,最佳聚合条件：pH6．0、（NH4）2S2O8和CH3NaO3S·2H2O总质量分数0．0125％、（NH4）：S2O8与CH3NaO3S·2H2O质量比1．0、偶氮类化合物质量分数0．0125％、单体质量分数（AM和阳离子单体总质量占整个反应体系的质量分数）35％、阳离子度（阳离子单体占AM和阳离子单体之和的质量分数）30％、反应温度25℃。在最佳条件下,所得阳离子聚丙烯酰胺絮凝剂的特性黏数为13．8535dl／g,在其加入量为0．027％的条件下处理污泥,上层清液透光率达99．6％,污泥脱水率达90．5％。并用红外光谱对阳离子聚丙烯酰胺的结构进行了表征。     

Enhanced Macroporous Cationic Chitosan Hydrogel by Freezing and Thawing Method with Superadsorption Capacity for Anionic Dyes

Journal of Polymers and the Environment - In this study, we have developed a simple technique to prepare cationic chitosan hydrogel with interconnected porous structure using freeze–thaw...     

Simultaneous Removal of Cationic and Anionic Dyes from Binary Solutions Using Carboxymethyl Chitosan Based IPN Type Resin

Journal of Polymers and the Environment - In this study, a novel bead form IPN type resin comprising poly (2-Dimethylaminoethyl) methacrylate and carboxymethyl chitosan networks with a high dye...     

锰锌铁氧体/SiO_2复合磁性材料的制备和表征

以正硅酸乙酯(TEOS)作为包覆材料,对锰锌铁氧体纳米颗粒进行SiO2包覆,制备出锰锌铁氧体/SiO_2复合磁性材料。利用FTIR,XRD,SEM等技术对其进行了表征,并研究了其对模拟亚甲基蓝废水的吸附脱色效果。实验结果表明:当SiO_2质量分数为40%1时,采用先将锰锌铁氧体在柠檬酸溶液中搅拌分散3 h后,加人氨水调节溶液pH,再继续搅拌分散3 h的分段分散方法制备的复合磁性材料对亚甲基蓝废水的处理效果更好,处理亚甲基蓝质量浓度为50 mg/L、COD为160 mg/L的废水,废水脱色率为97.2%,COD去除率为19.3%。表征结果显示:复合磁性材料锰锌铁氧体/SiO_2为球形颗粒,平均粒径为100 nm;SiO_2包覆前后锰锌铁氧体的晶型均为尖晶石型结构,在复合磁性材料中SiO_2以无定型的形态存在。     

阳离子淀粉-丙烯酰胺接枝共聚物絮凝剂的制备及其絮凝性能

研究了阳离子淀粉与丙烯酰胺接枝共聚反应制备阳离子型絮凝剂的工艺,并用硅藻土悬浊液及实际水样对产物的絮凝性能进行了考察。其最佳合成条件：阳离子淀粉与丙烯酰胺的质量比为1：4,引发剂加入量为丙烯酰胺质量的0．1％,反应温度50℃,反应时间3h。絮凝效果实验中,接枝共聚物絮凝剂的最佳加入量为4mg／L。与阳离子淀粉和阳离子聚丙烯酰胺絮凝剂相比,接枝共聚物絮凝剂对渭河水及造纸网下白水的絮凝效果更好。     

聚硅酸盐复合絮凝剂的研制

合成了聚环氧琥珀酸-聚硅酸铁锌复配物（PESA—PSFZ）,并对其稳定性和絮凝效果进行了研究。结果表明：PESA—PSFZ较聚环氧琥珀酸一聚硅酸复配物具有更高的Zeta电位及更好的去浊效果,沉降速率快,适用的pH范围广;当PESA—PSFZ加入量为6mg／L时,对模拟废水的浊度去除率达99．2％;当PESA—PSFZ加入量为20mg／L时,对印染废水的COD去除率达87.3％。     

Preparation of Cellulose/Xanthan Gum Composite Films and Hydrogels Using Ionic Liquid

This paper reports the preparation of cellulose/xanthan gum composite films and hydrogels through gelation with an ionic liquid. Mixtures of cellulose and xanthan gum in desired weight ratios with an ionic liquid, 1-butyl-3-methylimidazolium chloride (BMIMCl), were thinly placed on a Petri dish and heated at 100 °C for 9 h to obtain the solutions. Then, the solutions were left standing at room temperature for 1 day for the progress of gelation. The resulting ion gels were subjected to Soxhlet extraction with ethanol to remove BMIMCl, followed by drying under ambient conditions to obtain the composite films. The crystalline structures of the polysaccharides and the mechanical properties were evaluated by powder X-ray diffraction measurement and tensile testing of the films, respectively. The ion gels in various cellulose/xanthan gum weight ratios, which were prepared in a test tube by the same procedure, were immersed in water for the exchange of disperse media to obtain the cellulose/xanthan gum composite hydrogels. Water contents of all the materials were higher than 90 %. The mechanical properties of the hydrogels were evaluated by compressive testing.     

Preparation and Characterization of Cellulose/Polypropylene Composite Using an Oxidatively Degraded Polypropylene

In this work, an oxidatively degraded polypropylene (DgPP) was studied as a novel coupling agent for fibrous cellulose (FC)/polypropylene (PP) composite. An optimal preparation time of PP thermal oxidative degradation was 18 h at 130 °C, and the DgPP had functional groups such as γ-lactone and acid groups. The spherulite observation of the DgPP suggested miscibility for the undegraded PP. The addition of the DgPP presented the transparency improvement of FC/PP composite, and this behavior was found to be originated from the grafted DgPP, which was produced by the esterification reaction between the of FC and the DgPP. The scanning electron microscope (SEM) observation showed that the grafted DgPP coated the FC surface, and the tensile strength of the FC/PP composite increased by an appropriate amount of the DgPP addition. These results suggested that the DgPP was suitable for the coupling agent of FC/PP composite.     

疏水改性阳离子聚丙烯酰胺絮凝剂的制备及其絮凝性能

通过水溶液共聚合法,以丙烯酰胺(AM)、丙烯酰氧乙基三甲基氯化铵(DAC)和2-乙烯基吡啶(2-VP)为共聚单体合成了疏水改性阳离子聚丙烯酰胺P(AM-DAC-2VP),并用红外光谱仪和核磁共振光谱仪对其结构进行了表征。实验结果表明:当w(2-VP)为1.0%、w(DAC)为30%、活性污泥pH为5、P(AM-DAC-2VP)加入量为25mg/L时,P(AM-DAC-2VP)对本实验的活性污泥絮凝能力最强,上清液透光率为92.1%;P(AM-DAC-2VP)比同条件下制备的阳离子聚丙烯酰胺P(AM-DAC)具有更好的絮凝效果。     

Synergistic Effect of Oil Palm Based Pozzolanic Materials/Oil Palm Waste on Polyester Hybrid Composite

This research work aims to investigate the synergistic effect of pozzolanic materials such as oil palm ash (OPA) and oil palm empty fruit bunch (OPEFB) on the developed hybrid polymer composites. The OPEFB and OPA fillers of different particle sizes (250, 150, and 75 µm) were mixed at OPEFB:OPA ratios of (0:100; 20:80; 40:60; 60:40; 80:20 and 100:0) and incorporated into an unsaturated polyester resin. Furthermore, both mechanical and morphological properties of the composites were analyzed and it was found that tensile, flexural, and impact properties were significantly improved at OPEFB:OPA of 75 µm particle size hybridization of the polymer. The increase of OPEFB to OPA filler ratio up to 80:20 significantly improved the tensile properties of the composites while 40:60 ratio of 75 µm gave the optimum filler ratio to obtain the highest flexural and impact properties of the composites among all studied samples. Scanning electron micrograph images showed strong particle dispersion of the embedded fillers with resin which explained the excellent mechanical strength enhancement of the composite.     

TEMPO-Mediated Oxidation of Norway Spruce and Eucalyptus Pulps: Preparation and Characterization of Nanofibers and Nanofiber Dispersions

This study deals with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation of cellulose. Softwood and hardwood pulp fibers were suspended in water and oxidized to various extents at pH 10 and 22 °C using sodium hypochlorite in the presence of TEMPO radical and sodium bromide. This reaction system is known to be the most efficient one for the introduction of both surface carboxyl and aldehyde groups. Important relationships between formation of these functional groups and the fibrillation yield, light transmittance of the water dispersions and degree of polymerization of the oxidized softwood and hardwood pulps were established in the present study. A birefringence test confirmed the presence of nanofibers which according to atomic force microscopy analyses had diameters in the 1.6–3.8 nm range.     

TiO2-Cu2O/蒙脱土复合光催化剂的制备与性能

以钠基蒙脱土（MMT）为载体,先采用溶胶-凝胶法将纳米TiO₂引入到MMT层间,再采用化学沉积法将纳米Cu₂O负载在TiO₂/MMT上,制备出TiO₂-Cu₂O/MMT纳米复合光催化剂。采用XRD、SEM、紫外-可见漫反射技术对催化剂进行了表征。以甲基橙为目标污染物,考察了催化剂的光催化性能。表征结果显示：TiO₂与Cu₂O均匀分布在MMT的表面与片层孔隙中;TiO₂-Cu₂O/MMT结合了TiO₂和Cu₂O的特性,拓宽了催化剂的光吸收范围。实验结果表明,在光源为可见光、初始甲基橙质量浓度为20 mg/L、光催化剂加入量为2 g/L的条件下,TiO₂-Cu₂O/MMT纳米复合光催化剂对甲基橙的光催化降解效果明显优于单一负载的Cu₂O/MMT和TiO₂/MMT,大幅提高了催化剂的光催化效率,反应300 min时TiO₂-Cu₂O/MMT对甲基橙溶液的脱色率达到93%。