Selective Lead(II) Adsorption and Flocculation Characteristics of the Grafted Sodium Alginate: A Comparative Study

Synthesis of sodium alginate-g-poly(acrylamide-co-N-methylacrylamide) [S-III], sodium alginate-g-poly(N-methylacrylamide-co-N,N-dimethylacrylamide) [S-II], sodium alginate-g-poly(acrylamide-co-N,N-dimethylacrylamide) [S-I]. Sodium alginate-g-poly(N,N-dimethylacrylamide) [SAG-g-PDMA] and sodium alginate-g-poly(acrylamide) [SAG-g-PAM] were prepared by solution polymerization technique using potassium peroxydisulfate as the initiator at 70?°C in water medium. The graft copolymers were characterized by FTIR and NMR (¹H and ¹³C) spectroscopy, SEM and XRD studies. All the five graft copolymers were used to remove Pb(II) ions from the aqueous solution and also in flocculation studies of kaolin clay (1.0 wt%), silica (1.0 wt%) and iron ore slime (0.25 wt%) suspensions. A comparative studies of all the five graft copolymers were also made in both the two cases. The Pb(II) ion removal capacity of all the graft copolymers follows the order S-III?>?SAG-g-PAM?>?S-II?>?SAG-g-PDMA?>?S-I. But the flocculation performance of the graft copolymers follows the order S-II?>?S-I?>?S-III?>?SAG-g-PDMA?>?SAG-g-PAM. S-III was also used for the competitive metal ion removal with Hg(II), Cd(II), Cu(II) and Zn(II). Pb(II) adsorption of S-III (the best Pb(II) ion adsorber) follows pseudo second order rate equation and Langmuir adsorption isotherm.     

Comparative Investigations on Optimum Polymerization Conditions for the Synthesis of a Sustainable Poly(Lactic Acid)

The development of synthetic biodegradable polymers using solvent free polymerization has a unique potential to be used as sustainable polymers in biomedical applications. The aim of this work was to synthesize and characterize a sustainable class of poly(lactic acid) (PLA) under different operating conditions via direct polycondensation of lactic acid (LA). Several parameters were tested including the absence of solvents and catalysts on the polymerization, in addition to polymerization temperature and time. Polymerization conditions were evaluated using response surface method (RSM) to optimize the impact of temperature, time, and catalyst. Results showed that molecular weight (M_w) of PLA increased with increasing polymerization time. Highest M_w of 28.4 kD with relatively a broad polydispersity 1.9 was achieved at polymerization temperature 170?°C at 24 h in the free solvent polymerization. This led to a relevant inherent viscosity of 0.37 dl/g. FTIR spectra exhibited a disappearance of the characteristic peak of the hydroxyl group in LA at 3482 cm^?1 by increasing the intensity of carbonyl group. The ¹H nuclear magnetic resonance (NMR) exhibited the main chain at 5.22 ppm and the signal of methyl proton at 1.61 ppm as well as a signal at 4.33 and 1.5 assigned to the methane proton next to the terminal hydroxyl group and carboxyl group respectively. Meanwhile, the PLA synthesized with a catalyst [Sn(Oct)₂] in a free solvent demonstrated comparatively high thermal transition properties of glass transition, melting, and crystallinity temperatures of 48, 106, and 158?°C, respectively. These results are of significant interest to further expand the use of PLA in biomedical applications.     

Alkoxy-silyl Induced Agglomeration: A New Approach for the Sustainable Removal of Microplastic from Aquatic Systems

The substance class of inert organic-chemical stressors (IOCS) describes organic-chemical (macro-) molecules, which demonstrate a high level of persistence upon entry in the ecosystem, and whose degradation is limited. These synthetically produced organic-chemical macromolecules, which are often derived from the polymerization of different monomers, are, in the form of plastics, indispensable in the everyday world. They enter the environmental compartments and cause great damage due to primary (industry, cosmetic, washing of textile), and secondary (degradation) entry. If these particles get into aquatic systems, this has fatal consequences for the ecosystem such as the death of marine animals, or bioaccumulation. Wastewater treatment plants are reaching their limits and require innovative ideas for the sustainable removal of microplastic. This article examines a new approach to the removal of polymers from aquatic systems (lab scale) by using sol–gel induced agglomeration reactions to form larger particle agglomerates. These enlarged agglomerates can be separated much more easily from the wastewater, since they float on the water surface. Separation systems, e.g. sand trap can easily be used. A further advantage is that the agglomeration can be carried out completely independently of the type, size, and amount of the trace substance concentration as well as of the external influences (pH value, temperature, pressure). Thus, this new type of particle separation can not only be used in sewage treatment plants, but can also be transferred to decentralized systems (e.g. implementation in industrial processes).

Graphical Abstract

Open image in new window

     

Reuse of Stormwater for Watering Gardens and Plants Using Green Gully: A New Stormwater Quality Improvement Device (SQID)

This paper introduces a new stormwater quality improvement device, called the "Green Gully" that collects, purifies, and reuses stormwater throughout an automated system. The working principal of the Green Gully is divided into two parts. Firstly, diverting stormwater from roadways to the diverter channel by filtering litter and secondly, watering the gardens and roadside plants with the stormwater that is collected from diverter channel. Stormwater treatment is an important step before reusing the water for gardening purpose. Different treatment levels (primary, secondary, and tertiary) are applied depending on the application to make water suitable for long-term storage and watering purposes. In this study, stormwater samples from three sites of Rockhampton City have been tested and analyzed to determine the quality of water for reuse. The parameters tested were electrical conductivity, pH, salinity, concentration of oil and grease, total suspended solid, turbidity, alkalinity, sodium, and chloride. The results of on-site stormwater quality tests are compared with the Australian and New Zealand Environment Conservation Council (ANZECC) standards and quality data available in the literature for each parameter suitable for irrigating roadside plants and gardening. Although, the results of this study is comparable with the literature data, a significantly different quality data are found compared to ANZECC standards. However, the samples collected for this study gave a basic understanding of stormwater quality issues for potential inflows to the Green Gully. Further study is recommended in order to establish mathematical link between raw stormwater quality and water quality required for gardening and irrigating roadside plants and for adopting required level of treatment facility with Green Gully for purifying and reusing water through an automated network system.     

Peanut hull pellets as a single use sorbent for the capture of Cu(II) from wastewater

This paper investigates the ability of peanut hulls and peanut hull pellets to adsorb copper from dilute aqueous metal ion solutions in batch and fixed bed systems. The kinetics of copper uptake onto the media have been investigated in batch systems and the influence of pH and particle size on the rate and extent of copper capture determined. The Langmuir and Freundlich isotherm theories were determined; the Langmuir model was found to best represent the equilibrium isotherm data. In normalized kinetic tests at least 75% of copper removal occurred within the first 20 min; 92% removal was effected within the first 50 min. The rate of uptake was optimum within the pH range 5-7.5, and media capacities remained relatively constant at a pH above 4.0. Bench-scale column studies were performed using peanut hull pellets. The overall capacity of pelletized peanut hulls was higher than for unmodified peanut hulls. Due to their demonstrated ability for Cu(II) uptake and favorable structural characteristics, pelletized peanut hulls could gain use as a low-cost, once-through biomass filter medium for copper-bearing waste streams.     

Heavy metals in wastewater: Modelling the hydroxide precipitation of copper(II) from wastewater using lime as the precipitant

The effect of effluent composition (Cl⁻, SO₄²⁻ or CO₃²⁻) on the efficiency of the hydroxide precipitation of Cu(II) modelling lime (CaO) as the precipitant has been predicted using the solubility domain approach and has been experimentally validated. Solubility domains were based on the phases that were found to be solubility-limiting for systems representing potential effluent chemical composition limits. The generated solubility domains generally encompassed the experimentally observed solubilities, thereby providing effluent treatment quality assurance ranges for the hydroxide precipitation process. The presence of gypsum (CaSO₄.2H₂O) and calcite (CaCO₃) as secondary precipitates had little effect on the observed residual Cu(II) solubilities, with Cu(II) mobility being governed by the least-soluble kinetically precipitated (rather than thermodynamically favoured) phase in the system under study.     

酚焦油资源化技术研究(Ⅱ)--裂解产物的分离

开发出一种精馏与钠盐法相结合的分离酚焦油裂解产物的新工艺，裂解产物经精馏，蒸出异丙苯等轻组分、苯酚馏分和共沸物。共沸物中加入氢氧化钠，分离出酚钠盐和苯乙酮。轻组分和酚钠盐均返回苯酚、丙酮生产装置。裂解产物中有用物质的收率为92．91％，苯乙酮的收率为82．38％，其纯度大于98％。     

A comparative study of two composts as filter media for the removal of gaseous reduced sulfur compounds (RSCs) by biofiltration: Application at industrial scale

This work presents the use of two composts as filter media for the treatment by biofiltration of odors emitted during the aerobic composting of a mixture containing sewage sludge and yard waste. The chemical analysis of the waste gas showed that the malodorous compounds at trace level were the reduced sulfur compounds (RSCs) which were dimethyl sulfide (Me₂S), methanethiol (MeSH) and hydrogen sulfide (H₂S). Laboratory tests for biofiltration treatment of RSCs were performed in order to compare the properties of two filter media, consisted of a mature compost with yard waste (YW) and a mixture of mature compost with sewage sludge and yard waste (SS/YW). The maximum elimination capacity (EC) values obtained with the YW mature compost as packing material were 12.5 mg m^?3 h^?1 for H₂S, 7.9 mg m^?3 h^?1 for MeSH and 34 mg m^?3 h^?1 for Me₂S, and the removal efficiency decreased in the order of: H₂S > MeSH > Me₂S. Moreover, the YW compost filter medium had a better behavior than the filter medium based on SS/YW in terms of acclimation of the microbial communities and moisture content. According to these results, a YW mature compost as packing material for an industrial biofilter were designed and this industrial biofilter was found effective under specified conditions (without inoculation and addition of water). The results showed that the maximum EC value of RSCs was 935 mg m^?3 h^?1 (100% removal efficiency, RE) for an inlet loads (IL) between 0 and 1000 mg m^?3 h^?1. Thus, YW compost medium was proven efficient for biofiltration of RSCs both at laboratory and industrial scale.     

Multi-Scale Characterization of Fractured Rocks Used as a Means for the Realistic Simulation of Pollutant Migration Pathways in Contaminated Sites: A Case Study

An integrated methodology is developed to quantify the geostatistical and transport properties of fractured media at multiple scales. Such information is helpful in developing numerical models and estimating the up-scaled transport coefficients of fractured formations. An oil-contaminated fractured site, overlying granite rock and situated in northern Spain, is investigated, and a macroscopic geological model that quantifies the regional distribution of faults and fractures over the entire area is established. The methodology is based on the measurement of fractured outcrops in the field (scale ～1-100 m), the collection of representative fractured samples and measurement of the fracture aperture (scale ～0.01-1 mm), and the analysis of macroscopic characteristics (scale ～1-5 km) of fracture/faults. The multi-scale fracture properties are utilized to construct a discrete fracture/fault network model which provides input data to a macroscopic simulator of contaminant transport in fractured porous media. The transient NAPL migration pathways are predicted for one scenario of pollution. Such information is helpful in the risk assessment of fractured contaminated sites.     

Chemical Recovery of Useful Chemicals from Polyester (PET) Waste for Resource Conservation: A Survey of State of the Art

In this paper we present the main technologies developed over the last decades on chemical recycle of PET from a practical and economical point of view. We show details of plants used to carry out solvolitic reactions emphasising steps of purification, which are sometimes not considered when discussing chemical, recycle but which, in fact, are the key feasibility factors. The recycling or modification of PET to obtain monomers and other useful chemicals as intermediates and additives is carefully considered.