Anthropometric hand dimensions in a population of Iranian male workers in 2012

Background. The mismatch between the hand size of workers and the size of industrial instruments is a growing concern; it can lead to various musculoskeletal complications. Currently, there are few reliable studies available to address this concern in Iran. This study was conducted to measure 30 upper-extremity parameters in a group of Iranian industrial workers. Methods. This study is a cross-sectional study on 529 workers. The study population was randomly selected from male Iranian industrial workers who were referred to the Yazd hospital occupational medicine clinic for surveillance evaluations. Results. The M (SD) age of the participants was 30.13 (8.29) years. Statistical analysis was performed using the mean, standard deviation and 5th, 50th and 90th percentiles for each measured hand dimension. A considerable number of dimensions were significantly different between the measurements of right and left hands in each examinee. The results showed significant differences between Iranian hand size and that of other populations. Conclusion. This study provided a valuable databank of hand dimensions in a population of Iranian male workers. These data can be used by manufacturers in designing high-quality hand-tools and industrial gloves, taking into consideration Iranian worker characteristics.     

Relationships between certain individual characteristics and occupational accidents

Background. Work accidents and injuries are an occupational health and safety problem. Methods. This cross-sectional study was conducted for 404 frontline workers who were randomly selected from the Arya Sasol Petrochemical Company in Bushehr, Iran, during 2016. A statistical analysis was performed using the χ² test and the logistic regression model with SPSS version 18. Results. The overall occupational accident rate among the participants was found to be 9.2%. Statistically significant differences were observed for body mass index, education, job experience, smoking habit, consumption of sedative pills and presence of sleep disorders. Three factors had significant adjusted odds ratios (ORs): body mass index (OR 2.41, 95% confidence interval [CI] [1.16, 5.04]), education (OR 0.25, 95% CI [0.07, 0.85]) and job experience (OR 0.29, 95% CI [0.15, 0.57]). Conclusions. Preventive programs should be implemented for industrial workers, especially young workers, workers who smoke, overweight workers and workers with psychosomatic disease.     

Work-related musculoskeletal disorders among workers in an MDF furniture factory in eastern Thailand

The purpose of this study was to analyze the factors contributing to musculoskeletal disorders (MSDs) among 439 workers in an MDF furniture factory using questionnaires and the risk assessment form of the Ergonomic Assessment Tool for Arthritis technique to assess aspects of the workstations and working postures of jobs. With regard to factors that affected MSDs, it was found that workers older than 50 years were having knee symptoms: their adjusted odds ratio (aOR) was 18.49, 95% confidence interval (CI) [1.51, 226.40]. Those who had been working for 1–2 years were having neck pain symptoms: aOR 12.01, 95% CI [1.82, 79.43]. The recommendation of this study is that health monitoring should be provided for workers who have pain in various parts of their bodies, especially those who have been working for 6–10 years, and those who are over 50 years old with knee pain.     

Evaluation of two models of a slipmeter

The aim of the study was to compare the performances of the Brungraber Mark II (BM II) and Mark III (BM III) slipmeters. Friction measurements with the two slipmeters were conducted in a laboratory using four footwear materials, four floor types, and three surface conditions. Both the coefficient of friction (COF) values obtained with the slipmeters and the force platform-based COF values were measured. The COF measured with the BM II was slightly higher than that measured with the BM III with a R² of 0.83. A comparison of the averaged normal force between the two slipmeters showed that the BM II generated a significantly higher normal force than the BM III at a low COF and the difference of the normal force between the two slipmeters decreased when the COF value was increased. The regression analysis results in this study showed that the force platform-based COF values were closer to the COF values obtained with the BM III than with the BM II. The R² values for the regression model between the COF values obtained from the slipmeter and the force platform were 0.90 and 0.79 for the BM II and BM III, respectively.     

Configuration predictions of large liquefied petroleum gas (LPG) pool fires using CFD method

Liquefied petroleum gas (LPG) has potential pool fire risks due to its flammability. The configuration of pool fires plays a significant role when applying the solid flame model or point source model to assess the risks from heat radiation. However, no existing correlations can precisely predict the configuration of large LPG (100% propane) pool fires. To enhance the fundamental understanding on how pool diameter and wind velocity can influence the configuration of large LPG pool fires, an experimentally validated Computational Fluid Dynamics (CFD) model is employed to simulate fires using different burning rate models. Fire temperature profiles, flame heights, and flame tilts predicted by the CFD model were compared with empirical models and experimental data. Accordingly, new correlations for flame height and flame tilt as functions of pool diameter D and wind velocity u_w have been developed. The comparisons demonstrate that the new correlations have the best overall accuracy in the prediction of flame height and tilt for large LPG pool fires under different conditions (10 m ≤ D ≤ 20 m, 0 ≤ u_w ≤ 3 m·s⁻¹).     

Respiratory Impairment in Cotton-Ginning Workers Exposed to Cotton Dust

Dust generated during the handling and processing of cotton causes ill health of ginning workers. The purpose of this study was to determine the prevalence of respiratory symptoms among cotton-ginning workers. This study involved 188 workers of 10 cotton-ginning factories. Forced vital capacity (FVC), peak expiratory flow rate (PEFR), and forced expiratory volume in 1 s (FEV1) declined significantly with increasing duration of exposure (p < .001) of the cotton-ginning workers. Results of a standard respirator medical evaluation questionnaire indicated that, depending on duration of exposure, 51%–71% of cotton-ginning workers suffered from chest tightness, 55%–62% experienced chest pain, while 33%–42% of the workers reported frequent cough. Blood tests of the workers showed higher values of erythrocyte sedimentation rate, eosinophils, and white blood cells when exposure was longer. Byssinosis symptoms were observed among the workers. We recommend regular periodical medical check-ups, compulsory use of personal protective equipment, and proper ventilation at the workplace.     

Effect of restaurant types on compensation claims for work-related musculoskeletal disorders in France

Objectives. The economic burden of work-related musculoskeletal disorders (WMSDs) is industry specific. The objective was to analyse compensation claims for WMSDs among restaurant workers in France taking into account the type of restaurant. Methods. Data for 2014 were obtained from the French National Health Insurance Fund for Salaried Workers. A chi-square test was used to compare claims, incapacity and lost work day rates in different types of restaurant. Results. Prevalence for WMSDs differed significantly by the type of kitchen: collective restaurant (7.2/1000 workers), traditional restaurant (1.7/1000), and fast food restaurant (1.0/1000). There were more male claimants in traditional restaurant workers (51.0%) than in collective restaurant workers (40.1%) but more female claimants in collective restaurant workers (50.1%) than in traditional restaurant workers (39.4%). Permanent incapacity was significantly more prevalent in collective restaurant workers (49.6%), than in traditional (41.9%) and fast food (8.5%) restaurant workers. In collective restaurant workers, as a percentage, claims, permanent incapacity and lost work days increased with age range or work experience. Conclusions. Prevalence for WMSDs and therefore incapacity and lost work days are different according to the type of restaurant. Preventive strategies should take these differences into consideration.     

Health impact and noise exposure assessment in the cricket bat industry of Kashmir,India

Aim. The aim of the present study was to identify and evaluate predominant noise sources in the cricket bat industry of Kashmir, India. Methods. Sound levels were measured at operator’s ear level in the working zone of the workers of seven cricket bat factories. The impact assessment was made through personal interviews with each worker separately during their period of rest. Results. On average, 62.5% of the workers reported difficulty in hearing and 24.1% of the workers have become patients for hypertension. Only 58.1% of the workers complained of headache due to high noise level. Conclusions. The workers engaged in the cricket bat industry of Kashmir are exposed to high noise levels. It is suggested that personal protective equipment like ear plugs and ear muffs be used by these workers as a protection against this hazard.     

Occupational noise exposure and hearing defects among sawmill workers in the south of Thailand

The aim of this study was to investigate occupational noise exposure and hearing defects among sawmill workers in the south of Thailand. Seven hundred sawmill workers participated, of which 335 (47.9%) were male. The mean age of the sawmill workers was 33.5 years (SD 10.2), and more than 60% were <35 years old; 75.1% of the workers had less than 5 years of work experience. Only about one in four workers (25%) had been trained in use of personal protective equipment (PPE), and half of the participants never or rarely wore PPE while working. The prevalence rate of noise-induced hearing loss (NIHL) was 22.8% (N?=?42). Male workers had significantly higher risk than female workers (odds ratio [OR]?=?2.21). Workers aged older than 25 years had significantly higher risks for NIHL (OR?=?3.51–12.42) than workers younger than 25 years. Sawing workers had higher risk for NIHL than office workers (OR?=?3.07).     

Work-safety tension, perceived risk, and worker injuries: a meso-mediational model

IntroductionWork-safety tension arises when workers perceive that working safely is at odds with effectively doing their jobs. We proposed that workers’ perceptions of work-safety tension would be associated with higher levels of perceived risk, which would, in turn, relate to worker injuries on the job.MethodGrocery store workers (n = 600) completed an online survey and organizational worker injury reports were obtained for a two-year period following the survey. Survey results were linked to subsequent worker injuries using hierarchical generalized linear modeling.ResultsWe found support for the proposed meso-mediation model: department work-safety tension predicted subsequent worker injuries, partially through an association with workers’ risk perceptions.ConclusionsSafety researchers and consultants and organizational leaders should look beyond typically-examined safety climate constructs, such as management commitment to safety, and pay particular attention to workers’ perceptions of work-safety tension.     

Effects of physical exercise on musculoskeletal disorders,stress and quality of life in workers

Background. The effect of physical exercise in the workplace (PEW) on health promotion of workers is contradictory. Objective. To evaluate the effects of the PEW in musculoskeletal disorders (MSDs), perception of stress and quality of life in workers. Methods. The participants were divided into two groups: control group (n?=?46) including non-participant workers of the PEW program, and PEW group (n?=?50) including workers who regularly participate in the exercise program. All workers answered the Nordic general questionnaire, the perceived stress scale and the quality-of-life questionnaire. Results. The PEW group reported a lower prevalence of MSDs for the trunk in the last 7 days and 12 months (p?=?0.021 and p?=?0.001, respectively), and for the upper limbs in the last 12 months (p?=?0.001) compared with the control group. The results for the perception of stress and quality of life showed no significant differences between the groups. Conclusion. PEW is a potential method to reduce MSDs in workers, but it was not efficient in reducing stress levels or improving the quality of life of the workers.     

Investigation of work-related musculoskeletal disorders among male kitchen workers in South India

Objective. This study aims to quantify the prevalence of work-related musculoskeletal disorders (MSDs) and risks among male kitchen workers in the catering industry. Method. Data were collected with the help of the Nordic musculoskeletal questionnaire and by direct observations. Results. In total, 114 male kitchen workers from various hostels of a college in South India were considered for this study. The average age and mean years of employment of the workers are 26.4 (SD 7.7) and 7.8 respectively. The statistical analysis carried out reveals that 67.5% of male kitchen workers reported MSDs during the past 12 months. The highest prevalence rate has been found in the lower back (65.8%) and shoulder region (62.3%). Among different categories of kitchen work analyzed, it is evident that chief cooks suffer more from MSDs (79.2%) than assistant cooks (74.3%) and kitchen aides (30.0%). Workers in the older group, i.e., ≥41 years, and workers with 6–10 years of experience suffer with higher risk of MSDs, i.e., 93.9% and 87.5%, respectively. Conclusion. The male kitchen workers who participated in this research were found to possess both MSDs and ergonomic hazards.     

A new method for calculating saddle seat height with an emphasis on optimal posture based on trigonometric relations

Introduction. Based on the literature, the ergonomic saddle chair provides the most appropriate posture for users. Determination of the seat height is critical to establish the proper posture, carried out using various methods of anthropometry. This study aimed to develop a simple and applied method for determining the saddle seat height with an emphasis on appropriate posture. Methods. In this study, anthropometric dimensions including weight, body height, popliteal height and seat height at 135° knee angle in 150 male and female dentists were measured. In the laboratory, to determine the ‘acetabuloischial number’, 25 male and female natural hip bones were measured. The mean saddle-chair height with knee angle of 135° was then compared by two different methods, field measurement and the new calculation method. Results. The results showed a strong correlation between data gathered from the two different methods, the field measurement and the new calculation method (98%), and Cronbach’s α from the intraclass correlation was equal to 0.994 (p?<?0.05). This indicated that the two methods produced similar results. Conclusion. The new method can be applied to calculate the optimal height of the saddle seat based on body height and popliteal height.     

Application of mindfulness-based stress reduction to a stress management intervention in a study of a mining sector company

Purpose. The aim of this article was to check whether mindfulness-based stress reduction (MBSR) is an effective intervention in reducing work-related stress in the case of workers in a copper mine. Methods. Sixty six employees were randomized to the experimental group (32 participants) or to the control group (34 participants). Work-related stress was measured using the job content questionnaire (JCQ) and mental health was measured using the general health questionnaire (GHQ-28) Experimental manipulation was 40-h MBSR training. Results. Multivariate repeated-measures analysis of variance revealed a significant increase of JCQ decision latitude (F?=?17.36, p?<?0.001) and social support (supervisor F?=?9.00, p?<?0.004; coworker F?=?5.61, p?<?0.020), and a significant decrease in GHQ-28 anxiety (F?=?5.28, p?<?0.079) and depression (F?=?3.95, p?<?0.048) due to the intervention. Conclusions. The study confirms that MBSR can be effective in reducing stress resulting from the external risk (and/or imagined fear) of losing one’s health or life. The use of MBSR could be recommended in health and safety activities in difficult and dangerous work conditions, such as mining, to promote workers’ well-being.     

Postural Loading Assessment in Assembly Workers of an Iranian Telecommunication Manufacturing Company

Background. Changes in industries and work practices have coincided with work-related musculoskeletal disorders (MSDs). This study was conducted to determine the prevalence of MSDs and to assess postural loading in assembly workers of an Iranian telecommunication manufacturing company. Methods. Data were collected from 193 randomly selected workers in 4 units of the company. The Nordic musculoskeletal disorders questionnaire and the UBC ergonomic checklist were used as data collection tools. Loading on the upper body assessment (LUBA) was used to assess postural loading. Results. Lower back symptoms were the most prevalent problems among the workers (67.9%). LUBA showed that most assembly workers (94.3%) had experienced considerable and high postural loading (postural load index, PLI > 5). Regression analyses revealed that lighting, rotation, contact stress, repetition, gender and age were factors associated with symptoms. Conclusion. Work-related MSDs occurred at a high rate among workers. Postural loading requires consideration. Any ergonomic intervention should focus on eliminating ergonomic factors associated with symptoms.     

Repeatability of electromyography normalization of the neck and shoulder muscles in symptomatic office workers

Purpose. The purpose of the study was to examine the repeatability of electromyography (EMG) normalization in office workers with neck and shoulder symptoms. Methods. Fifteen female office workers with neck/shoulder symptoms were recruited to participate in two separate days of testing. Maximum voluntary isometric contraction (MVIC) was used for the normalization of EMG data on the following muscles: cervical erector spinae, upper trapezius, lower trapezius and anterior deltoid. Repeatability was calculated using the intra-class correlation (ICC), relative standard error of measurement (%SEM) and relative coefficient of variation (%CV). Results. Peak root mean square (rms) and median frequency (MF) showed good to high repeatability in the UT, AD and CES (ICC?=?0.87–0.95, %SEM=?2.65–9.48, %CV=?0.2–5.9). The repeatability of peak rms was good (ICC?=?0.87, %SEM?=?12.56, %CV?=?3.3) and the MF of the LT was fair (ICC?=?0.76, %SEM?=?5.71, %CV?=?2.9). Conclusion. Peak rms and MF from the MVIC normalization method can be measured with sufficient repeatability in symptomatic office workers.     

Discordance between age- and size-based criteria of child passenger restraint appropriateness

Objectives: In this study, we sought to accomplish the following objectives: to (1) calculate the percentage of children considered appropriately restrained across 8 criteria of increasing restrictiveness; (2) examine agreement between age- and size-based appropriateness criteria; (3) assess for changes in the percentage of children considered appropriately restrained by the 8 criteria between 2011 (shortly after updates to U.S. guidelines) and 2015.

Methods: Data from 2 cross-sectional surveys of 928 parents of children younger than 12 years old (n = 591 in 2011, n = 337 in 2015) were analyzed in 2017. Child age, weight, and height were measured at an emergency department visit and used to determine whether the parent-reported child passenger restraint was considered appropriate according to 8 criteria. Age-based criteria were derived from Michigan law and U.S. guidelines. Weight, height, and size-based criteria were derived from typical restraints available in the United States in 2007 and 2011. The percentage appropriate restraint use was calculated for each criterion. The kappa statistic was used to measure agreement between criteria. Change in appropriateness from 2011 to 2015 was assessed with chi-square statistics.

Results: Percentage appropriate restraint use varied from a low of 19% for higher weight limits in 2011 to a high of 91% for Michigan law in 2015. Agreement between criteria was slight to moderate. The lowest kappa was for Michigan law and higher weight limits in 2011 (κ = 0.06) and highest for U.S. guidelines and lower weight limits in 2011 (κ = 0.60). Percentage appropriate restraint use was higher in 2015 than 2011 for the following criteria: U.S. guidelines (74 vs. 58%, P < .001), lower weight (57 vs. 47%, P = .005), higher weight (25 vs. 19%, P = .03), greater height (39 vs. 26%, P < .001), and greater size (42 vs. 30%, P = .001).

Conclusions: The percentage of children considered to be using an appropriate restraint varied substantially across criteria. Aligning the definition of appropriate restraint use with current U.S. guidelines would increase consistency in reporting results from studies of child passenger safety in the United States. Potential explanations for the increased percentage of children considered appropriately restrained between 2011 and 2015 include adoption of the updated U.S. guidelines and the use of child passenger restraints with higher weight and height limits.     

Estimation of Aerobic Capacity and Determination of Its Associated Factors Among Male Workers of Industrial Sector of Iran

Introduction. The aim of this study was to estimate maximal aerobic capacity (V_O2max), to determine its associated factors among workers of industrial sector of Iran and to develop a regression equation for subjects’ V_O2max. Methods. In this study, 500 healthy male workers employed in Shiraz industries participated voluntarily. The subjects’ V_O2max was assessed with the ergocycle test according to the Åstrand protocol. Required data was collected with a questionnaire covering demographic details (i.e., age, job tenure, marital status, education, nature of work, shift work, smoking and weekly exercises). Results. The subject’s mean V_O2max was 2.69 ± 0.263 L/min. The results showed that there was an association between V_O2max and age, BMI, hours of exercise and smoking, but there was no association between V_O2max and height, weight, nature of work and working schedule. On the basis of the results, regression equations were developed to estimate V_O2max. Conclusion. Final regression equation developed in this study may be used to estimate V_O2max reliably without the need to use other laboratory instruments for aerobic measurement.     

Computational fluid dynamics simulations of hydrogen releases and vented deflagrations in large enclosures

This paper presents model predictions obtained with the CFD tool FLACS for hydrogen releases and vented deflagrations in containers and larger enclosures. The paper consists of two parts. The first part compares experimental results and model predictions for two test cases: experiments performed by Gexcon in 20-foot ISO containers (volume 33 m³) as part of the HySEA project and experiments conducted by SRI International and Sandia National Laboratories in a scaled warehouse geometry (volume 45.4 m³). The second part explores the use of the model system validated in the first part to accidental releases of hydrogen from forklift trucks inside a full-scale warehouse geometry (32 400 m³). The results demonstrate the importance of using realistic and reasonably accurate geometry models of the systems under consideration when performing CFD-based risk assessment studies. The discussion highlights the significant inherent uncertainty associated with quantitative risk assessments for vented hydrogen deflagrations in complex geometries. The suggestions for further work include a pragmatic approach for developing empirical correlations for pressure loads from vented hydrogen deflagrations in industrial warehouses with hydrogen-powered forklift trucks.