服装行业缝纫工作工效学调查研究

对服装行业缝纫工种工人的慢性肌肉骨骼损伤进行了工效学分析。结果表明，目前缝纫工主要存在的工效学问题是：坐位工作台均偏高，工作椅也普遍较高，同一动作持续工作时间过长（平均大于１小时），８小时工作日休息时间过短（平均仅为３０分钟）。建议根据有关标准和法规，采取相应改进措施     

Decision-making in controlling development of driving/piloting situations

This paper introduces the presentation of several works carried out, in France, in the field of transport ergonomics and psychology. It aims at pointing out the original features of the French ergonomics approach of dynamic situations; these features are related to the method used (the analysis of an activity in actual working conditions is emphasized) and the specific definitions of several concepts such as the concepts of ‘work activity’, ‘task’ and ‘situation’. This introductory paper proposes to define these notions and to show their relevance to an analysis of driving activities.     

Reducing Musculoskeletal Discomfort: Effects of an Office Ergonomics Workplace and Training Intervention

Effects of an office ergonomics workplace and training intervention on workers’ knowledge and self-reported musculoskeletal pain and discomfort were investigated. An instructional systems design process was used to develop an office ergonomics training program and the evaluation tools used to measure the effectiveness of the training program on workers’ office ergonomics knowledge and skills. It was hypothesized that the training and workplace intervention would allow the worker to more effectively use their workplace through increased office ergonomics knowledge and skills. Following the intervention, there was a significant increase in workers’ office ergonomics knowledge and awareness. Self-reported work-related musculoskeletal disorders significantly decreased for the group who had a workplace change and received ergonomic training relative to a workplace change-only group and a no intervention control group.     

Ergonomics and Quality Management—Humans in Interaction With Technology,Work Environment,and Organization

Abstract

In many studies, ergonomics has been shown to influence human performance. The aim of this paper was to demonstrate imp ortan t ergonomics influences on quality in industrial production, from the perspective of interactions between humans, technology, organization, and work environment. A second aim was to elab orate on the implications of these findings for the development of quality management strategies. This paper shows that ergonomics problems in terms of adverse work environmental conditions, in appropriate design of technology, and an unsuitable org an izatio n are important causes of quality deficiencies. Problem solving aimed at improving ergonomics, quality, and productivity simultaneously is likely to obtain sup po rt from most of the interest parties of the company, and may also enhance participation. Ergonomics has the potential of becoming a driving force for the development of new quality management strategies.     

机械行业工效学调查研究

对机械行业工人的慢性肌肉骨骼损伤进行了工效学分析。结果表明，目前我国机械行业工人主要存在的工效学问题是：坐椅高度和坐位工作台高度较高，正常作业范围过大，同一动作持续工作时间过长、劳动时间率偏高、工中休息时间偏少。建议根据有关法规和标准，采取工效学改进措施     

飞机座舱工效多级模糊评价研究

主要从系统工程角度 ,对飞机座舱工效多级模糊评价方法中的评价因素集、因素权重值、模糊评价矩阵以及综合评价方法等的确定 ,进行了初步探索。在此基础上 ,构造了模糊评价矩阵、因素权重值数据库流程图 ,为飞机座舱工效的总体评价及其数据库系统的建立奠定了基础。最后 ,简单讨论了现存的问题及今后进一步的研究方向     

通用桥式起重机驾驶员操作可靠度研究

为有效改善桥式起重机驾驶员的操作水平,通过分析和确定这种起重机的工作流程,建立驾驶员基本动作序列。采用第二代人因可靠性分析(HRA)模型,按正常工作状态与紧急工作状态2种情况,对驾驶员操作可靠度进行全面、定量的分析与研究。结果表明,驾驶员操作可靠度定量研究中,重要的是要考虑起重机机型和基本操作动作序列、工作状态、动作时间、人机工效、作业环境等复杂因素。建立驾驶室人机工效定量分析与评价机制,加强驾驶员专业教育培训及考核制度、改善工作环境等技术措施,从根本上提高驾驶员操作可靠度等级,才能符合起重机械安全的发展趋势。     

基于JACK的机务人员上肢职业性损伤的仿真与评估

为客观评价机务人员上肢职业性肌肉骨骼损伤风险,选取作业姿势、肌肉负载和暴露时间作为评估工作过程中机务人员肌肉骨骼损伤的指标,结合工效学和仿真技术,建立机务维修中肌肉骨骼损伤风险仿真评价方法,定量评估工作过程中机务人员肌肉骨骼损伤程度。采用动素理论分解A330飞机六号肋改装作业任务,对作业人员、工作场景、维修动作进行建模,使用JACK软件中的人因分析工具(TAT)分别对选取指标进行分析评估。研究结果表明：在六号肋改装作业中,机务人员存在严重的上肢职业性肌肉骨骼损伤的隐患,此研究方法可客观高效评估机务人员上肢职业性肌肉骨骼损伤的程度。     

基于多层次模糊综合评判的人疲劳综合评价

疲劳是一种复杂的生理和心理现象,易引发事故。目前对疲劳的测定多采用主观感觉测试法,仅对罗列症状做出“有”与“无”的判定,不能对症状的程度做出量化判断。笔者应用模糊数学中多层次模糊综合评判原理,通过确定人的疲劳因素集及其评价集,构建了人疲劳的综合评价模型。制定了疲劳指标评估表,确定了各指标的权重,实现了对疲劳的定量分析,对人的疲劳状况进行了综合评价,并进行了实例分析与计算,其结果符合客观实际,具有一定的科学性、合理性和较强的实用性,对劳动者的安全健康保护,对职业卫生工程、人机工程、安全管理工程均有重要的参考价值,对安全生产具有一定的指导意义。     

An investigation of ergonomics analysis tools used in industry in the identification of work-related musculoskeletal disorders.

Web-based surveys were sent to Canadian certified ergonomists, Joint Health and Safety Committees (JHSCs) and health and safety certification trainers to understand better which ergonomics analysis tools were used in industry and help JHSCs obtain the necessary training required to reduce work-related musculoskeletal disorders (WMSDs). The results showed that most of the certified ergonomists used the Snook/Mital tables, the National Institute of Occupational Safety and Health (NIOSH) equation and rapid upper limb assessment (RULA) /rapid entire body assessment (REBA). The most frequently used methods by JHSCs to identify ergonomics risk were injury reports and worker complaints. The surveys for the health and safety certification trainers revealed that most curricula did not include ergonomics analysis tools. There appears to be a gap between what is recommended by certified ergonomists for JHSC, what is taught in training and what is used by JHSCs for ergonomics risk analysis. A better understanding, modifications in training curricula and education of JHSCs are needed to help reduce WMSDs.     

Application of a Screening Method in Assessing Occupational Safety and Health of Computer Workstations

Employers and workers need concrete guidance to plan and implement changes in the ergonomics of computer workstations. The Näppärä method is a screening tool for identifying problems requiring further assessment and corrective actions. The aim of this study was to assess the work of occupational safety and health (OSH) government inspectors who used Näppärä as part of their OSH enforcement inspections (430 assessments) related to computer work. The modifications in workstation ergonomics involved mainly adjustments to the screen, mouse, keyboard, forearm supports, and chair. One output of the assessment is an index indicating the percentage of compliance items. This method can be considered as exposure assessment and ergonomics intervention used as a benchmark for the level of ergonomics. Future research can examine whether the effectiveness of participatory ergonomics interventions should be investigated with Näppärä.     

基于人的认知可靠性(HCR)模型的人因操作失误研究

以人的认知可靠性(HCR)模型为指导,选择包含技能型、规则型和知识型3种认知类型,结合大连化工集团公司影响运行安全的17个异常事件,对54名操纵员的时间响应状况和允许操作时间进行录像、记录与分析;依据IAEA提供的指标[1],找出操纵员在生产过程中可能出现的操作失误类别及其可能造成的危害;基于3参数威布尔模型推导出操纵员操作响应失误概率模型,并从人机工程学角度提出了具体预防事故的安全对策措施。结果表明,基于HCR模型的大化集团公司操纵员的人因操作失误模型实用、有效,为实现操作者与机器系统相协调的目标、正确评估操作着实时操作的响应时间提供了重要参考依据。     

工作场所职业工效相关因素及其管理初探

为了探讨工作场所职业工效管理的基本策略和方法,在概述职业工效相关因素类别、相互关联及评价方法等基础上,提出基于职业病危害防治要求、风险管理理念和管理体系建设模式的职业工效不良因素干预管理的初步策略及实施要点。研究结果表明:工作场所职业工效相关因素包括个体特征、工艺设备及其布局、工作系统设计、作业环境、作业管理和社会心理因素等,不同因素间存在直接或间接的相互影响,并最终影响到微观层面劳动者职业活动的工效特点及宏观层面工作场所整体的职业工效特征;实施有效的职业工效管理,在于科学辨识、评估不良职业工效因素的基础上,进一步在职业病危害预防控制的不同阶段采取合理可行的管理方法进行干预,并持续改进。     

Participatory ergonomics intervention in an industrially developing country--a case study

In industrially developing countries, a few ergonomists have directed great efforts towards developing ergonomics awareness among managers and workers in organizations. There is little research on the degree of their success, though. Furthermore, access of organizations to ergonomics knowledge is usually very difficult, especially in industrially developing countries. Thus, building ergonomics awareness is certainly the first phase of the process. Three companies from one industry (44 people: 14 females and 30 males) participated in a project aimed at improving their work system. At the beginning, we needed to create a common goal and ensure participation with appropriate ergonomics tools. The findings of this study were the key issue for the ergonomics intervention (i.e., a shared vision, awakened need of change and learning). Further, to build ergonomics awareness and develop a continuous learning process in the company, it was necessary to use more ergonomics tools through workers' participation in different workplaces.     

Arm and Leg Girths of Industrial Workers During a Workday

The aim of this study was to characterize changes in the limb perimeters of workers in various widespread occupations in Estonian industry. Investigations were carried out using special measuring instruments designed at Tallinn Technical University. The subjects under investigation consisted of 202 workers: garment workers, tailoring cutters, shoe factory operators, weavers, press operators, fitters, and drivers.

Investigations in the workshops showed that during the initial part of a work-shift perimeters often decreased. By the end of the shift, girths increased markedly (up to 1.6%), depending on the properties of the external load. There are many reasons for this change, with fatigue often playing an important role.

The exact measurement of the girths of human limbs is of great importance for collecting information in the field of ergonomics. It is possible to find effective preventive measures against fatigue and occupational diseases.     

Using ergonomics in engineering design to improve health and safety

This paper outlines the importance of ergonomics in engineering design. It describes some of the cost benefits and principles underlying the application of ergonomics. The practical impact of the latter has become increasingly important in the light of European directives which are likely to have a substantial impact on the way engineers design. Three ergonomics case studies are described, the first two illustrate ways of identifying costs of poor ergonomics and the cost benefits of redesign using ergonomics principles. The third illustrates work which led to engineers redesigning assembly line workstations and ergonomics becoming an important part of manufacturing design. The background to this was concern about an increase in cases of Upper Limb Disorders (ULDs) and recognition that ergonomic advice was needed to find the source of problems and help in finding design options. Ergonomists were brought in and helped in identifying problems with workstations and tools. Final designs were developed by the company's own engineers based on the ergonomic study and reduced incidence of ULDs has been reported. Photographs showing examples before and after redesign can be found in the Health and Safety Executive's notes of guidance published in 1990, and some issues surrounding the nature of the detailed design solutions are discussed here. The impact of the ergonomics contribution resulted in engineers being trained in ergonomics so that it could be implemented on a routine basis throughout the site.     

Estimating the effectiveness of ergonomics interventions through case studies: implications for predictive cost-benefit analysis

PROBLEM: Cost-benefit analysis (CBA) can help to justify an investment in ergonomics interventions. A predictive CBA model would allow practitioners to present a cost justification to management during the planning stages, but such a model requires reliable estimates of the benefits of ergonomics interventions. METHOD: Through literature reviews and Internet searches, 250 case studies that reported the benefits of ergonomics programs and control measures were collected and summarized. RESULTS: Commonly reported benefits included reductions in the number of work-related musculoskeletal disorders (WMSDs) or their incidence rate, as well as related lost workdays, restricted workdays, and workers' compensation costs. Additional benefits reported were related to productivity, quality, turnover and absenteeism. DISCUSSION: Benefits reported were largely positive, and payback periods for ergonomics interventions were typically less than one year. SUMMARY: The results of this review could be used to develop predictive CBA models for ergonomics programs and individual control measures. IMPACT ON INDUSTRY: Cost-justifying ergonomics interventions prior to implementation may help to secure management support for proposed changes. Numbers used for the benefits side of a cost-benefit analysis (CBA) need to be based on "real world" data in order to be credible. The data presented in this paper may help in the development of simple cost-benefit models for ergonomics programs and control measures.     

Synergism of Ergonomics,Safety, and Quality—A Behavioral Cybernetic Analysis

Abstract

This report extends a control systems or cybernetic model of behavior to the behavior of groups of many individuals—organizations and institutions—operating together with technology as complex sociotechnical (ST) systems. The premise is that the level of quality in performance of a complex ST system is predicated upon the degree to which its organizational design incorporates elements of a closed-loop behavioral control system: control goals and objectives, sensory receptors, sensory feedback, learning and memory, effectors, and sensory feedback control. From a control systems perspective, ergonomics is essential to effective organizational self-regulation. If working conditions are poorly designed, work performance and safety and quality outcomes cannot be closely controlled. Conversely, as shown by field evidence, good design promotes synergism between ergonomics, safety, and quality as a closed-loop consequence of effective employee and organizational self-control of system performance, safety, and quality.