Handling Techniques: The Influence of Weight and Height for Experts and Novices

The purpose of this study was to evaluate the influence of the weight of the load (12 kg, 22 kg) and of the height of the grasp (high: 126 cm; middle: 64 cm and 95 cm; low: 33 cm) on the handling techniques adopted by six experienced handlers and six novices having only limited handling experience during a free box-handling task. Each subject had to transfer two sets of 16 boxes from a platform to a four-wheel cart. The observations dealt with the position of the subject at the beginning of transfer and at deposit (position of the back, knees and feet, pelvic orientation, position of the hands), his way of moving during the transfer (position of the feet), and his way of positioning and moving the box during handling (tilt of the box, impulse given to the box, grip change). The results show that the weight and the height of grasp/deposit had an influence on the techniques adopted by expert handlers and novices. Some of these variations are common to both groups but many of them are not, such as the position of the knees, the grips and the position of the box. This study suggests that there is not one method that is suitable for all situations, and that expert handlers may have learned how to adjust their methods to the working environment. A better understanding of the experts’ techniques could help in redesigning efficient training programs.     

Prediction of Musculoskeletal Discomfort in a Pick and Place Task (A pilot study)

A pilot study was conducted regarding the effects of working posture, handling frequency, and task duration on musculoskeletal discomfort. Participants rated their discomfort perceived while performing a repetitive task at 8 different combinations of manipulations. Pauses between the work periods lasted 15 min. Discomfort was rated according to Borg’s category-ratio scale CR-10 and postures were recorded by an optoelectronic movement registration system. From linear multiple regression analysis equations for predicting discomfort at various body regions were obtained. Coefficients of determination especially point to trunk inclination and handling frequency as major determinants of musculoskeletal discomfort.     

Load Acceleration and Footstep Strategies in Asymmetrical Lifting and Lowering

Accelerated execution effects for lifting and lowering a 12-kg box using two footstep strategies associated with experienced workers were studied. Eight healthy male participants performed a normal and an accelerated execution of a lifting task and a lowering task, using a minimal feet displacement strategy (oblique-step) and a strategy with a step (crossed-step). It was hypothesized that the accelerated executions, as compared to the normal executions, would have a different effect on L5/S1 resultant moment, body posture, and other kinematic variables. A tridimensional dynamic rigid body model was used to compute L5/S1 resultant moments. Results showed that the accelerated condition did not reduce body asymmetry of posture, but it reduced the length of the path of the global center of gravity and the duration of the supporting phase of the box, and it did not significantly affect L5/S1 maximal resultant moments for lifting but increased them for lowering. These results indicate that the net work production for accelerated strategies might be smaller, which may represent an economy of energy. Furthermore, the results showed that the use of an accelerated strategy for lowering should be avoided.     

Box Handling in the Loading and Unloading of Vans

The handling of 2,306 boxes being loaded or unloaded from vans onto or from 4-wheeled trolleys by 31 handlers in a warehouse were characterized. Handling was videotaped and characterized through an analysis grid completed by three trained observers. The following execution parameters were observed: nature of the exertion applied by the upper limbs, plane and direction of the exertion, resulting displacement of the box, grip, use of the lower limbs and the back. Results show that execution parameters used by handlers vary considerably from those usually recommended or studied. For example, symmetric grips were rarely used (4%). The grip was modified during the handling of half the boxes. Significant knee flexion was rarely observed (3% of exertions). Each box was moved by applying an average of . 3.5 different exertions. Exertions were mostly applied in a plane parallel to the shoulders; they were rarely executed in a strict sagittal plane (11%). The implication of these observations are discussed.     

Computer Usage With Cold Hands; An Experiment With Pointing Devices

Computers are used in the outdoors and in connection with cold store work. Cold hand and fingers limit data input, as studied here. Six input devices; trackballs, pens, and a mouse were tested by 19 participants in a Fitts’ target acquisition task with 2 target sizes under 2 experimental conditions; warm and cold right hand. Measures were acquisition times, number of errors, participant’s preferences, and observed handling of the devices. Effects of device, target size, and cold were significant. Learning and attempts to improve handgrip were confirmed. Large enough targets, a thick pen, and a mouse make computer work practicable in the cold. Direct visual feedback, as with pen on template with target images, shortened acquisition times by half a second.     

Influence of trunk muscle activity and stability in front and back holding

Purpose. A tandem carrying style is often used in the workplace, but carrying approaches are different for two people because of the holding load in the tandem posture. To understand these carrying styles, this study aimed to investigate the patterns of muscle activity and stability of the trunk influenced by front and back holding of a heavy load. Methods. Electromyography data of eight trunk and two hip muscles, as well as displacements of the trunk, were recorded for analysis while subjects stood statically holding a handle in the front and back of the body with and without load. Results. Without load, muscle activities during front holding mirrored those during back holding. With load, greater muscle activities were observed in the dorsal muscles of the trunk and lesser activities were noted in the ventral muscles in the two holding styles. More frequencies of trunk oscillations occurred in front holding with and without load. Conclusions. The results revealed that back holding of load created more stability of the upper body, whereas front holding resulted in more instability of the trunk.     

An analysis of injury claims from low-seam coal mines

Introduction

The restricted workspace present in low-seam coal mines forces workers to adopt awkward working postures (kneeling and stooping), which place high physical demands on the knee and lower back.

Method

This article provides an analysis of injury claims for eight mining companies operating low-seam coal mines during calendar years 1996-2008. All cost data were normalized using data on the cost of medical care (MPI) as provided by the U.S. Bureau of Labor Statistics.

Results

Results of the analysis indicate that the knee was the body part that led in terms of claim cost ($4.2 million), followed by injuries to the lower back ($2.7 million). While the average cost per injury for these body parts was $13,100 and $14,400, respectively (close to the average cost of an injury overall), the high frequency of these injuries resulted in their pre-eminence in terms of cost. Analysis of data from individual mining companies suggest that knee and lower back injuries were a consistent problem across companies, as these injuries were each among the top five most costly part of body for seven out of eight companies studied.

Application/Impact

Results of this investigation suggest that efforts to reduce the frequency of knee and low back injuries in low-seam mines have the potential to create substantial cost savings.     

基于AlphaPose与REBA的手工搬运作业姿势风险评估方法

为有效预防职业性肌肉骨骼疾患(WMSDs),提出基于计算机视觉技术与快速全身评估(REBA)结合的作业姿势评估方法,以手工搬运作业为例,通过人体姿态识别AlphaPose模型检测作业姿势,利用提取的各关节点空间位置信息计算身体各部位关节角度;利用SG滤波法处理身体遮挡、光线等对数据的影响,有效保留数据变化信息的同时消除数据突变;根据身体关节角度范围与危害程度对应关系自动评判作业姿势的风险大小。研究结果表明：作业姿势评估方法可通过采集的视频数据自动评估搬运作业的姿势危险性,降低WMSDs风险,通过分析不同下蹲取物姿势风险,可论证作业姿势评估方法的可行性,为及时改善搬运作业中的不安全动作提供参考。     

Ergonomics in Practice: Physical Workload and Heat Stress in Thailand

This study consists of assessments of the thermal environment and physio-logical strain in tasks associated with airport, construction, and metal jobs. The number of male and female participants was 108. Environmental heat stress was evaluated with the WBGT index. Physiological strain was evaluated by the relative cardiovascular load (%CVL) based on the measurements of heart rate. Also the increase of body temperature, weight loss, and perceived discomfort were determinated. At work sites the assessments lasted for 2 to 4 hrs for each participant. The mean physiological strain exceeded the level of 30%CVL. Severe peaks (over 60%CVL) were observed in specific tasks being in agreement with perceived discomfort ratings. The increase of body temperature and weight loss in most cases remained within acceptable limits. For the most strenuous tasks, various ergonomic improvements were developed in consultation with workers and managers.     

基于SD的装配式建筑施工安全监管演化博弈研究

为了有效减少装配式建筑工程施工安全事故,考虑政府监管部门与施工单位之间存在信息不对称,基于有限理性条件下双方互动关系构建装配式建筑施工安全动态监管演化博弈模型,并分析其稳定策略.采用系统动力学(SD)方法仿真分析在动态监管策略及外部变量调整条件下的演化博弈过程.研究结果表明:政府强弱监管的成本差、施工单位加强安全管理的...     

Are older drivers’ driving patterns during an on-road driving task representative of their real-world driving patterns?

Abstract

Objective: The current study investigated whether older drivers’ driving patterns during a customized on-road driving task were representative of their real-world driving patterns.

Methods: Two hundred and eight participants (male: 68.80%; mean age?=?81.52 years, SD?=?3.37 years, range?=?76.00–96.00 years) completed a customized on-road driving task that commenced from their home and was conducted in their own vehicle. Participants’ real-world driving patterns for the preceding 4-month period were also collected via an in-car recording device (ICRD) that was installed in each participant’s vehicle.

Results: During the 4-month period prior to completing the on-road driving task, participants’ median real-world driving trip distance was 2.66?km (interquartile range [IQR]?=?1.14–5.79?km) and their median on-road driving task trip distance was 4.41?km (IQR?=?2.83–6.35?km). Most participants’ on-road driving task trip distances were classified as representative of their real-world driving trip distances (95.2%, n?=?198).

Conclusions: These findings suggest that most older drivers were able to devise a driving route that was representative of their real-world driving trip distance. Future research will examine whether additional aspects of the on-road driving task (e.g., average speed, proportion of trips in different speed zones) are representative of participants’ real-world driving patterns.     

Effect of automated versus manual emergency braking on rear seat adult and pediatric occupant precrash motion

Abstract

Objective: Emergency braking can potentially generate precrash occupant motion that may influence the effectiveness of restraints in the subsequent crash, particularly for rear-seated occupants who may be less aware of the impending crash. With the advent of automated emergency braking (AEB), the mechanism by which braking is achieved is changing, potentially altering precrash occupant motion. Further, due to anatomical and biomechanical differences across ages, kinematic differences between AEB and manual emergency braking (MEB) may vary between child and adult occupants. Therefore, the objective of this study was to quantify differences in rear-seated adult and pediatric kinematics and muscle activity during AEB and MEB scenarios.

Methods: Vehicle maneuvers were performed in a recent model year sedan traveling at 50?km/h. MEB (acceleration ～1?g) was achieved by the driver pressing the brake pedal with maximum effort. AEB (acceleration ～0.8?g) was triggered by the vehicle system. Inertial and Global Positioning System data were collected. Seventeen male participants aged 10–33 were restrained in the rear right passenger seat and experienced each maneuver twice. The subjects’ kinematics were recorded with an 8-camera 3D motion capture system. Electromyography (EMG) recorded muscle activity. Head and trunk displacements, raw and normalized by seated height, and peak head and trunk velocity were compared across age and between maneuvers. Mean EMG was calculated to interpret kinematic findings.

Results: Head and trunk displacement and peak velocity were greater in MEB than in AEB in both raw and normalized data (P?≤?.01). No effect of age was observed (P?≥?.21). Peak head and trunk velocities were greater in repetition 1 than in repetition 2 (P?≤?.006) in MEB but not in AEB. Sternocleidomastoid (SCM) mean EMG was greater in MEB compared to AEB, and muscle activity increased in repetition 2 in MEB.

Conclusions: Across all ages, head and trunk excursions were greater in MEB than AEB, despite increased muscle activity in MEB. This observation may suggest an ineffective attempt to brace the head or a startle reflex. The increased excursion in MEB compared to AEB may be attributed to differences in the acceleration pulses between the 2 scenarios. These results suggest that AEB systems can use specific deceleration profiles that have potential to reduce occupant motion across diverse age groups compared to sudden maximum emergency braking applied manually.     

屏蔽服冷却系统对人体表面温度影响的研究*

为科学有效地论证多种方式组合的冷却屏蔽服在不同环境条件下对人体表面温度控制的效果,需要对冷却系统及人体敏感部位发热量进行客观评估。通过对5名健康男性的高温测试,探究人体在不同环境温度下体表温度的变化,得出胸部、背部及额头为热量最高部位,并构建以“人体-降温屏蔽服-外界环境”为主体的冷却系统数值模型,对不同环境中的屏蔽服冷却效果展开研究,分析穿戴冷却屏蔽服时人体躯干部分的温度分布及影响。结果表明:在屏蔽服中靠近胸部、背部部位引入相变材料和风扇,均可帮助人体降低体温,提高舒适度。     

Comparison of Canadian firefighters and healthy controls based on submaximal fitness testing and strength considering age and gender

Introduction. Few studies have addressed whether firefighters are fitter than the general population and possess sufficient levels of aerobic capacity and muscle strength to perform on-duty tasks in a safe and efficient manner, considering age and gender. We aimed to evaluate the fitness levels of Hamilton firefighters, and to determine the effects of age and gender. Methods. In total, 89 participants were recruited. The modified Canadian aerobic fitness test was used to determine participants’ estimated maximal oxygen consumption (V_O2max) levels. For upper and lower body strength levels, a calibrated J-Tech hand-held dynamometer and a National Institute for Occupational Safety and Health (NIOSH) lifting device was used respectively. Results. Firefighters’ mean (SD) V_O2max level was 40.30?±?6.25?ml·kg^?1·min^?1. Age proved to have a statistically significant impact on V_O2max (p?<?0.001). Gender displayed statistically significant effects on strength levels. Firefighters’ age was the only statistically significant independent variable, and accounted for 61.00% of the variance in firefighters’ aerobic capacity levels. Conclusions. Firefighters possessed somewhat similar aerobic capacities but much higher levels of body strength when compared with the general population. With age, firefighters’ aerobic capacities decreased; however, their upper and lower body strength levels remained the same.     

Children's and Adults’ Comfort Experience of Extra Seat Belts When Riding in the Rear Seat of a Passenger Car

Objective: The objective of this study was to explore passengers’ comfort experience of extra seat belts during on-road driving in the rear seat of a passenger car and to investigate how the use of extra belts affects children's and adults’ attitudes to the product.

Methods: Two different seat belt systems were tested, criss-cross (CC) and backpack (BP), consisting of the standard 3-point belt together with an additional 2-point belt. In total, 32 participants (15 children aged 6–10, 6 youths aged 11–15, and 11 adults aged 20–79, who differed considerably in size, shape, and proportions) traveled for one hour with each system, including city traffic and highway driving. Four video cameras monitored the test subject during the drive. Subjective data regarding emotions and perceived discomfort were collected in questionnaires every 20 min. A semistructured interview was held afterwards.

Results: All participant groups accepted the new products and especially the increased feeling of safety (P <.01); 56% preferred CC and 44% preferred BP but the difference was not significant. In total, 81% wanted to have extra seat belts in their family car. CC was appreciated for its symmetry, comfort, and the perceived feeling of safety. Some participants found CC unpleasant because the belts tended to slip close to the neck, described as a strangling feeling. BP was simpler to use and did not cause annoyance to the neck in the way CC did. Instead, it felt asymmetric and to some extent less safe than CC. Body size and shape affected seat belt fit to a great extent, which in turn affected the experience of comfort, both initially and over time. Perceived safety benefit and experienced comfort were the most determinant factors for the attitude toward the extra seat belts. The extra seat belts were perceived as being better than the participants had expected before the test, and they became more used to them over time.

Conclusion: This exploratory study provided valuable knowledge from a user perspective for further development of new seat belt systems in cars. In addition to an increased feeling of safety, seat belt fit and comfort are supplementary influencing factors when it comes to gaining acceptance of new seat belt systems.     

Two-Dimensional Automatic Control Modeling of a Posture Control System

A posture control model has been developed on the basis of the 2-dimensional feedback control theory. Human postural characteristics were investigated in 5 healthy participants. Tests were performed with eyes open and eyes closed. After 5 s of quiet standing, each participant was unexpectedly pulled forward by 30 mm at his pelvis height and then released. Postural sway was measured over 20 s at a rate of 100 per second. Transfer functions to represent the posture control characteristic were identified by the least squares' method. These showed good results of the model's fitness, predictability, and stability. The response of the eyes-closed condition to perturbation is more oscillatory than that of the eyes-open condition. It seems that the model identified could be applicable to ergonomics, sports, or clinical situations.     

Evaluation and comparison of alarm reset modes in advanced control room of nuclear power plants

An automation function has been widely applied in main control room of nuclear power plants (NPPs). The alarm system of fourth nuclear power plant (FNPP) in Taiwan is also going to be developed with automatic technology that is expected to support the operators’ performance and reduce the number of alarms. In this study, an experiment with a training simulator as an advanced alarm system was conducted to compare the effects of different alarm reset modes on performance and subjective ratings. The objective was to evaluate the practicability of alarm system with only auto-reset function in FNPP. Results revealed that, using the auto-reset mode, participants had lower task load index (TLX) on effort in the first test trial and was more satisfied under multi-task condition. In contrast, using manual reset mode, participants were more satisfied on alarm handling, monitoring, and decision making. In other words, both reset modes are necessary to assist the operator in different aspects, but with only single reset mode is insufficient. The reset function in advanced alarm system therefore should be very flexible.     

Postural and Muscular Responses While Viewing Different Heights of Screen

This study aimed to examine the effects of visual display terminal (VDT) viewing angle on human postural angle and muscular activity. The participants’ neck, thoracic bending, and trunk inclination angles; and the activity of sternocleidomastoid, trapezius, splenius capitis, and erector spinae at 5 viewing angles (+40°, +20°,0°, –20°, and –40°) of a VDT screen were collected for 1 min. This study showed that neck and thoracic bending angles increased with viewing angle, while viewing angle did not significantly affect trunk inclination angle. In addition, the activity of trapezius and erector spinae increased when viewing a higher or lower VDT screen height compared with viewing a horizontal VDT screen height; however, the activity of splenius capitis decreased with viewing angle.     

Determination of Heat Loss from the Feet and Insulation of the Footwear

This study compared the methods of determining footwear insulation on human participants and a thermal foot model. Another purpose was to find the minimal number of measurement points on the human foot that is needed for insulation calculation. A bare foot was tested at 3 ambient temperatures on 6 participants. Three types of footwear were tested on 2 participants. The mean insulation for a bare foot obtained on the participant and model were similar. The insulation of warm footwear measured by the 2 methods was also similar. For thin footwear the insulation values from the participants were higher than those from the thermal model. The differences could be related to undefined physiological factors. Two points on the foot can be enough to measure the insulation of footwear on human participants (r = .98). However, due to the big individual differences of humans, and good repeatability and simplicity of thermal foot method, the latter should be preferred for testing.     

The role of local communities in chemical accident prevention and preparedness

Since the adoption of community right-to-know programs in the US there has been an increase in the number of groups known as local emergency planning committees. These committees have matured in focus over the intervening years since the Bhopal incident and even more so since the events of September 11, 2001. There is a strong recognition that local communities working very closely with chemical handling facilities in their areas can directly and meaningfully reduce the threat of a chemical release incident, regardless of cause. Likewise, through similar means they can better prepare themselves to respond should an incident occur. Especially as regards modern concepts of process chemical safety and facility security, local communities can be of great assistance to smaller facilities that do not otherwise necessarily have the resources to accomplish these tasks. As the vulnerabilities of a facility to accident or intentional act, the impacts of these events and the ability of communities to react are all a function of local conditions, it is clear that these local efforts can be more meaningful than large-scale national efforts. While national legislation is certainly helpful to the process of bringing people together, it is the local relationships that produce results.