Occupational Exposure to Asbestos During Renovation of Oil-Shale Fuelled Power Plants in Estonia

Many thousands of tonnes of asbestos were used in buildings in the past, especially for thermal insulation of pipes and boilers in power plants. Occupational exposure to asbestos dust now mainly occurs during demolition, renovation and routine maintenance activities. The objective of this study was to evaluate occupational exposure to airborne asbestos during renovation of solid oil-shale fuelled power plants carried out in 2001-2003. Air monitoring inside and outside of the renovation area was performed. The concentration of airborne fibres in the working environment increased during renovation but the valid limit value (0.1 fibres/cm³) was not exceeded.     

Self-reported occupational blood exposure among paramedics in Poland: a pilot study

Introduction. Paramedics are at risk of occupational blood exposure, increased by the immediacy of provided treatment. However, the issue has not been acknowledged to date by any research in Europe. Methods. This research aimed at assessing occupational blood exposure among paramedics in Poland. Respondents represented 21 Polish medical institutions. Their participation was voluntary and anonymous. Paramedics were provided with a self-directed job-specific questionnaire adapted to Polish conditions from an original US version. Results. 118 paramedics participated in the study from institutions constituting the National Emergency Medical System in Poland; including ambulance crews, Helicopter Emergency Medical Services and emergency department employees. Occupational exposure was reported by 18.64% of respondents and the main route of exposure was needlestick events. Conclusions. There is a further need to improve education among paramedics concerning the threat of being infected with blood-borne pathogens through all existing routes. Our findings point to the problem as being hidden and considered a shameful issue.     

Exposure to impulse noise at an explosives company: a case study

Impulse noise encountered in workplaces is a threat to hearing. The aim of this study was to assess the occupational exposure to impulse noise produced by detonation of dynamite on the premises of an explosives company. Test points were located on the blast test area (inside and outside the bunker) and in work buildings across the site. Noise propagation measurement was performed during 130 blast tests at nine measurement points. At every point, at least 10 separate measurements of A-weighted equivalent sound pressure level (L_Aeq), maximum A-weighted sound pressure level (L_Amax) and C-weighted peak sound pressure level (L_Cpeak) were made. Noise recorded in the blast test area exceeded occupational exposure limits (OELs). Noise levels measured in buildings did not exceed OELs. Results of the survey showed that for 62% of respondents, impulse noise causes difficulties in performing work. The most commonly reported symptoms include headaches, nervousness and irritability.     

Validation of a questionnaire about the perception of occupational biohazard in Spanish companies

Objectives. The aim of this work was to develop, validate and test a new questionnaire to assess the biological risk in workers with intentional or unintentional exposure to biological agents. Methods. A questionnaire including 34 questions was developed to study the perception of workers against occupational biohazard. Content Validity Index (CVI) and Content Validity Ratio (CVR) were calculated for the analysis of content validity. A pilot study was carried out with 60 workers from 17 companies performing analysis of Cronbach's α to assess the internal consistency or reliability. Results. A total of 518 workers from 51 Spanish companies in which there is exposure to biological agents participated in the study yielding a response rate of 90%. The final questionnaire obtained a Cronbach's α > 0.759 with a stable test–retest result. The questionnaire validation demonstrates that it could be used to evaluate the biological risks and help the prevention of occupational accidents and diseases. Discussion. This study has validated the need to evaluate worker's perception against occupational risks, as well as the application of prevention methods and protective equipment. It is a first step towards developing an occupational biohazards assessment method including all the requirements set by the European Health and Safety Strategy 2013–2020.     

Hand-arm vibration disorder among grass-cutter workers in Malaysia

Introduction. Prolonged exposure to hand-transmitted vibration from grass-cutting machines has been associated with increasing occurrences of symptoms and signs of occupational diseases related to hand–arm vibration syndrome (HAVS). Methods. A cross-sectional study was carried out using an adopted HAVS questionnaire on hand–arm vibration exposure and symptoms distributed to 168 male workers from the grass and turf maintenance industry who use hand-held grass-cutting machines as part of their work. The prevalence ratio and symptom correlation to HAVS between high and low–moderate exposure risk groups were evaluated. Results. There were positive HAVS symptoms relationships between the low–moderate exposure group and the high exposure group among hand-held grass-cutting workers. The prevalence ratio was considered high because there were indicators that fingers turned white and felt numb, 3.63, 95% CI [1.41, 9.39] and 4.24, 95% CI [2.18, 8.27], respectively. Less than 14.3% of workers stated that they were aware of the occupational hand–arm vibration, and it seemed to be related to the finger blanching and numbness. Conclusion. The results suggest that HAVS is under-diagnosed in Malaysia, especially in the agricultural sectors. More information related to safety and health awareness programmes for HAVS exposure is required among hand-held grass-cutting workers.     

Occupational Exposure to Polycyclic Aromatic Hydrocarbons During Diesel Combustion

Identification and determination of polycyclic aromatic hydrocarbons (PAHs) in Diesel exhaust in the working environment and assessment of workers’ occupational exposure to these suspected human carcinogens were the aim of this experimental investigation.

The range of exposure factors calculated on the basis of 9 individual PAH concentrations determined in personal air samples shows that time-averaged concentration of these compounds did not exceed the Polish Maximum Admissible Concentration (MAC) value for PAHs, that is, 2 μg·m^–3. The highest concentrations of PAHs were determined in the breathing zone of forklift operators. The maximum exposure factor was 0.427 μg·m^–3 (about 1/4 of MAC).     

Multiple dimensions of work-related risk factors and their relationship to work ability among industrial workers in Iran

Objectives. The present study was designed to investigate the simultaneous effects of physical, psychosocial and other work-related risk factors on the work ability index (WAI) score among industrial workers. Methods. This study used a cross-sectional design with a questionnaire survey. A total of 280 workers were included in the study. Data were collected using three questionnaires including the Persian version of the WAI, the Persian version of the job content questionnaire and an author-developed measure (to assess work-related factors, health-related factors and socio-demographic characteristics). Results. The majority of the participants were young, but they had poor WAI scores (mean 37.3?±?6.4) and 44.3% of them had poor or moderate work ability. Occupational accidents and injuries were found to be the strongest predictors of WAI scores. Additionally, there was a strong association between WAI scores and supervisor support, skill discretion, occupational training, sleep quality, work nature and educational level. Conclusions. Intervention programs should focus on improving supervisor support, sleep quality, job skills and knowledge and on decreasing physical and mental work demands. Additionally, implementing a comprehensive occupational health and ergonomics program for controlling and reducing hazardous working environments and occupational injury rates should be considered.     

Skin reactions to latex in dental professionals – first Croatian data

Purpose. To determine the prevalence of undesirable skin reactions to latex in dental professionals and students of the School of Dental Medicine in Zagreb, Croatia. Methods. Our research included 444 participants, of which 200 agreed to undergo a skin prick test (SPT). All participants answered a questionnaire in which we asked about incidence of skin lesions, duration of occupational exposure to latex, localization of skin lesions and symptoms. Statistical analysis of the questionnaire and test results was then carried out. Results. Of the total 444 participants surveyed, 249 (56.1%) reported lesions on their skin (professionals 64.8%, students 6.1–58.5%). From the questionnaire, 239 (96.0%) respondents reported lesions on the hands and fingers, mostly in the form of erythema (37.0%) and occasional dryness of skin (29.0%). Positive SPT results were found in 14 (7.0%) out of the 200 respondents who underwent the test. Conclusions. While a large number of subjects (56.1%) reported skin lesions when using latex products at their workplace, the SPT test was positive only in 7.0%. The results show that the prevalence of self-reported skin lesions was significantly related to the length of occupational exposure, with a substantial effect size (p?<?0.001; V?=?0.334).     

Development of a new masters program for occupational physicians in Flanders

Background: discussions with occupational physicians and a postal survey identified the shortcomings of previous programs, mainly found in the fields of occupational hygiene, ergonomics, environmental health and management.Objectives of the new program: basic knowledge (see content), the development of problem solving skills, scientific and social attitudes.Content: first year: occupational health practice, occupational hygiene, epidemiology, work physiology, toxicokinetics and dynamics and in service training (4 weeks). Second year: occupational pathology, environmental health, ergonomics, social legislation, safety, management and in service training (4 weeks). The total study load is estimated at about 1600 hours per year.Methods: interactivity is stimulated by the introduction of interdisciplinary seminars, project work in groups and Socratic dialogue. The objectives, contents and teaching and student-evaluation methods of the separate items were defined before selecting teachers.Finality of the program: a masters title sufficient to practice occupational medicine in Belgium. A subsequent postacademic training of 2 years, while at work, will be required for the title of specialist in occupational medicine, valid at European Union (EU) level. It will include preparing and publically defending a thesis.Statement: The collaboration of ex-students working in the field is essential in the development and quality assessment of adequate teaching programs.     

Relationships between certain individual characteristics and occupational accidents

Background. Work accidents and injuries are an occupational health and safety problem. Methods. This cross-sectional study was conducted for 404 frontline workers who were randomly selected from the Arya Sasol Petrochemical Company in Bushehr, Iran, during 2016. A statistical analysis was performed using the χ² test and the logistic regression model with SPSS version 18. Results. The overall occupational accident rate among the participants was found to be 9.2%. Statistically significant differences were observed for body mass index, education, job experience, smoking habit, consumption of sedative pills and presence of sleep disorders. Three factors had significant adjusted odds ratios (ORs): body mass index (OR 2.41, 95% confidence interval [CI] [1.16, 5.04]), education (OR 0.25, 95% CI [0.07, 0.85]) and job experience (OR 0.29, 95% CI [0.15, 0.57]). Conclusions. Preventive programs should be implemented for industrial workers, especially young workers, workers who smoke, overweight workers and workers with psychosomatic disease.     

Experimental analysis of radiographer exposure to the static field from a 1.5-T magnetic resonance imaging machine

Introduction. This study measures the exposure of occupational therapists from a 1.5-T magnetic resonance imaging (MRI) machine. Method. A total of 14 time-series on each of the chest, head and hand were taken before and after different MRI procedures. The peak values were noted in each case together with an average of all data recorded in the time-series. Results. The highest exposure recorded was observed on the hand, followed by the head and the chest. The overall maximum exposure (1479.40?mT) recorded was observed on the hand during a change of coil. It was also observed that the recorded exposure of experienced radiographers working in the MRI environment was less than that of junior staff due to different practices. Conclusion. This study is of significant importance in Malta since it is the first conducted in a MRI environment, especially because the results were compared with limits imposed by EU Directive 2013/35/EU which has to be implemented by July 2016.     

Nanotechnologies,engineered nanomaterials and occupational health and safety – A review

The significance of engineered nanomaterials (ENM) and nanotechnologies grows rapidly. Nanotechnology applications may have a positive marked impact on many aspects of on human every day life, for example by providing means for the production of clean energy and pure drinking water. Hundreds of consumer nano-based products are already on the market. However, very little is known of the risks of ENM to occupational safety and health (OSH), even though workers are likely to be at extra risk, as compared with other potentially exposed groups of people, because the levels of exposure are usually higher at workplaces than in other environments. However, knowledge of the exposure to, or effects of, ENM on human health and safety in occupational environments is limited and does not allow reliable assessment of risks of ENM on workers’ health. Several issues related to ENM in the workplaces require marked attention. The most topical issues include: (1) improved understanding of ENM metrics associated with ENM toxicity; (2) development of monitoring devices for ENM exposure assessment; (3) understanding the changes of ENM structure and state of agglomeration at different concentrations in aerosols; (4) understanding translocation of ENM in the human body; (5) identifying the key health effects of ENM including pulmonary toxicity, genotoxicity, carcinogenic effects, and effects on circulation; (6) development of tiered approaches for testing of safety of ENM; and (7) utilizing these data for health risk assessment, with a special emphasis on occupational environment. Available data on several ENM – ability to enter the body and reach almost any organ, to cause pulmonary inflammation and fibrosis, and even to cause increased risk of mesotheliomas in animal models, call for immediate action. It is crucial to identify those ENM that may cause occupational health and safety risks from those ENM which are innocent, hence allowing prioritization of regulatory and preventive actions at workplaces at national, regional and global levels.     

Effectiveness of a physical activity program on weight,physical fitness,occupational stress,job satisfaction and quality of life of overweight employees in high-tech industries: a randomized controlled study

Introduction. This study aimed to examine the effectiveness of a physical activity (PA) program on weight control, physical fitness, occupational stress, job satisfaction and quality of life of overweight and sedentary employees in high-tech industries. Methods. Participants in the intervention group (n?=?37) were instructed to carry out a PA program at moderate intensity for 60?min/session, 3 sessions/week for 12 weeks. Those in the control group (n?=?38) received no PA program and were asked to continue their routine lifestyle. Evaluations were performed at baseline and at the end of the intervention. Results of structured questionnaires and blood biochemistry tests and evaluations of physical fitness were analyzed. Results. The PA program effectively reduced the number of risk factors for metabolic syndrome and body fat percentage, and improved physical fitness such as flexibility, muscular strength and endurance and cardiorespiratory endurance. The intervention also significantly decreased levels of serum triglyceride, total cholesterol and low-density lipoprotein cholesterol. Significant positive effects on work control, interpersonal relationships at work, global job satisfaction and quality of life were also demonstrated. Conclusion. This study showed that a PA program can be helpful in improving physical, physiological and psychological outcomes for overweight and sedentary employees in high-tech industries.     

Development of a field well head safety system for use with radiation generating devices

This paper discusses the design, testing and application of a new interlock system for field use with neutron generating bore hole probes at the Idaho National Engineering and Environmental Laboratory. Such probes produce 14 MeV neutrons at a yield up to 3×10⁸ neutrons/s, and present an ionizing radiation hazard to personnel particularly when operated in an unshielded configuration. This interlock system prevents personnel from being exposed to the relatively high radiation fields caused by an unsafe condition when an operating neutron generator probe is withdrawn from a well in the ground. An electromechanical interlock prototype system has been designed, built and tested, and has been found to be effective at preventing this event. The design is simple, is effective in mitigating the hazard, and can be installed in minutes. The system could be modified to interlock radiation-generating devices other than neutron generators that are used in similar environments.     

Workers’ exposure to electric fields during the task ‘maintenance of an operating device of circuit breaker from a service platform’ at 110-kV substations

The objective of the study was to investigate occupational exposure to electric fields during the task ‘maintenance of an operating device of circuit breaker from a service platform’ at 110-kV substations. The aim was also to compare the results to Directive 2013/35/EU. At 16 substations, 255 electric field measurements were performed. The highest mean value of the electric fields was 9.6?kV?m^?1. At 63% of substations the maximum values were over 10.0?kV?m^?1, and at 31% of the substations the 75th percentiles were over 10.0?kV?m^?1, which is the low action level (AL) according to Directive 2013/35/EU. All measured values were below the high AL (20.0?kV?m^?1). In the future, it is important to take into account that the measurements were only taken at Finnish 110-kV substations; therefore, it is not possible to generalize these results to other countries and different types of substations.     

Efficiency of Filtering Materials Used in Respiratory Protective Devices Against Nanoparticles

The basic aim of this research was to establish the efficiency of filtering materials widely used in respiratory protection devices with particular interest in their porosity, degree of electric and changeable process parameters, such as the flow rate of the test nanoaerosol and the size range of nanoparticles. Tests were carried out with an NaCl solid aerosol of 3.2 × 10⁵ particles/cm³ for the range of particle size of 7–270 nm, at aerosol flow rate of 1800, 2700, 3600, 4500 and 5400 L/h. The tests showed that electrospun nonwovens were the most effective filtering materials for nanoparticles over 20 nm. Melt-blown electret nonwovens with lower porosity than electrospun nonwovens had higher values of penetration of 1%–4%. Those materials provided very efficient protection against nanoparticles of certain sizes only.     

Noise and neurotoxic chemical exposure relationship to workplace traumatic injuries: A review

IntroductionMore than 5,000 fatalities and eight million injuries occurred in the workplace in 2007 at a cost of $6 billion and $186 billion, respectively. Neurotoxic chemicals are known to affect central nervous system functions among workers, which include balance and hearing disorders. However, it is not known if there is an association between exposure to noise and solvents and acute injuries. Method: A thorough review was conducted of the literature on the relationship between noise or solvent exposures and hearing loss with various health outcomes. Results: The search resulted in 41 studies. Health outcomes included: hearing loss, workplace injuries, absence from work due to sickness, fatalities, hospital admissions due to workplace accidents, traffic accidents, hypertension, balance, slip, trips, or falls, cognitive measures, or disability retirement. Important covariates in these studies were age of employee, type of industry or occupation, or length of employment. Discussion: Most authors that evaluated noise exposure concluded that higher exposure to noise resulted in more of the chosen health effect but the relationship is not well understood. Studies that evaluated hearing loss found that hearing loss was related to occupational injury, disability retirement, or traffic accidents. Studies that assessed both noise exposure and hearing loss as risk factors for occupational injuries reported that hearing loss was related to occupational injuries as much or more than noise exposure. Evidence suggests that solvent exposure is likely to be related to accidents or other health consequences such balance disorders. Conclusions: Many authors reported that noise exposures and hearing loss, respectively, are likely to be related to occupational accidents. Practical applications: The potential significance of the study is that findings could be used by managers to reduce injuries and the costs associated with those injures.     

Application of Modified Carbon Anodes in Microbial Fuel Cells

The effect of different carbon anodes was examined in a new design of single chambered microbial fuel cell (SCMFC). The new cell design used a low-cost hydrophilic membrane to replace costly proton exchange membranes and carbon felt and a range of carbon and modified carbon anodes were investigated. The fuel for the SCMFC was brewery wastewater which was diluted with domestic wastewater and the presented microflora acts as a source of electro-active bacteria. The membrane acts as a separator between the anode chamber and an air cathode and allows the transfer of ions based on the wastewater's natural conductivity. The air cathode was carbon black (Ketjen Black EC 300J) which was deposited (1 mg cm⁻² concentration) directly onto the surface of the separator (one side of the membrane). Steady state polarization demonstrated maximum power densities of up to 30 mW m⁻² and a steady state power density of 20 mW cm⁻² at a current density of 110 mA m⁻² was achieved. The best performing anodes were made from carbon modified with quinone/quinoid groups. With unmodified graphite felt (the control anode material) as anode, the maximal power density obtained was 9.5 mW m⁻².     

A simple method to harness DC (direct current) electrical energy generated by bacterial activity

We developed a new system for collecting electrons generated by bacterial activity to supply DC (direct current) electrical energy. This system used eight titanium sub-electrodes (surface area of each sub-electrode: 189 cm²) connected to one central main titanium electrode (surface area of electrode: 1571 cm²). The distance between each sub-electrode and the main electrode was 30 cm. In an initial experiment, we collected electrons during composting cattle excreta, which was mixed with a commercially available microbial compost activator/starter. We analysed the relationships between the composting temperature and electrical current and voltage. Electrons were effectively collected and used successfully to obtain DC electrical energy. Generation of a stable voltage of approximately 0.5 V was clearly observed. This voltage was not related to compost temperature; however, the generated electrical current increased and decreased with compost temperature. The method was then used in a second experiment to collect electrons generated by bacterial activity in an agricultural field (area: 48 m²). Electrons in the field were effectively collected, and we measured a stable voltage of approximately 1.1 V and a stable current of approximately 0.7 mA. The system has the advantages of being simple, easily maintained, inexpensive, and applicable to large-scale agricultural fields.     

Trends in occupational injuries and fatality in Turkey

Introduction. The aim of this study was to evaluate the trend of occupational injuries in Turkey using epidemiologic criteria such as incidence mortality and fatality/all injuries recorded – rates. Materials and methods. Safety and health data were obtained from the Annual Statistic Books of the Social Insurance Institution (1988–2006) and Social Security Institution (2007–2011) of Turkey. Results. The results from the official data showed that although total employment is increasing the number of occupational injuries and incidence and mortality rates are decreasing. The results also demonstrate that occupational fatality/all injuries recorded – rate is increasing. The fatality/all injuries recorded – rate per 1000 injuries increased to 25.5 in 2011 from 8.6 in 1988. Each work day an average of five people died because of occupational injuries. Discussion and conclusions. The fatality/all injuries recorded – rate (the number of fatal cases per 1000 occupational injuries) is an important indicator of the injury rate for a country. Systems of occupational injury and illness surveillance constitute a critical resource for the management and reduction of occupational injuries and illness.