Influence of the milling tool setup on occupational safety in furniture making

One of the most serious causes of accidents in furniture making is kickback of machined material. The aim of this study was to determine the influence of the milling tool setup on hazards associated with kickback in furniture making. The speed of kickback was accepted as the measure of these hazards. The experiment involved controlled changes in milling tool setup, projection of cutting knives over the body of the milling tool, number of cutting knives and clearance angle. Multifactor analysis of variance was applied to the results of individual experiments, showing statistically significant factors and their interactions. Inspection and analysis of traces left by the cutting knives of the tools on the test pieces made of wood materials supported inferential statistics. The obtained results verified some common opinions and ideas on the impact of the milling tool setup on the hazards resulting from kickback in furniture making.     

自然老化木材燃烧过程热行为特性研究

为提供古建筑火灾数值模拟及风险评估的基础理论,从自然老化角度入手,选取经过长久自然老化的建筑服役木材作为研究对象,通过扫描电镜(SEM)及热物性试验对比分析自然老化木材与参照木材的外观形态及热传导特征;采用差示扫描量热DSC法,研究自然老化木材在燃烧过程中热释放的阶段特性,分析不同升温速率对老化木材热行为影响特征;基于...     

某木材加工企业安全评价中的危险因素辨识

木材加工生产中危险有害因素较多,发生人员伤害事故的风险比较高. 用安全系统的理论和方法,以某木材加工企业生产过程为研究对象,通过危险有害因素辨识,对造成人员伤害的危险事件发生的可能性和导致伤害后果的严重程度进行了分析,为提出相应的安全对策措施提供了依据.     

木材在线性增长热流下着火的复合判据研究

为探索木材在热流变化时的着火特点并提出着火判据,通过试验研究了木材在线性增长热流条件下的自发着火性能,测定了泡桐、椿木、榆木和刺槐4种木材的点燃时间、木材表面的入射热流以及试样内部的温度.结果表明.当热流增长率大于等于0.199kw/(m~2·s)时,试验的所有木材均可以被点燃,点燃这些木材的临界热流增长率介于0.065～0.103 kw/(m~2·s).建立了木材着火的计算模型,计算得出木材自发着火时的表面温度约为500℃.根据试验和计算的结果提出了-结合表面温度和临界热流增长率的木材自发着火复合判据.     

木质类人造板材炭化痕迹实验及数值重构研究

利用锥形量热仪测定不同辐射热通量和不同燃烧时间下木质类人造板材的炭化深度,建立木质类人造板材炭化痕迹的数学模型,并嵌入到FDS(Fire Dynamics Simulator)源程序中,与自身功能相结合,实现重构木质类人造板材炭化痕迹的功能。同时实验研究了不同油盘尺寸、不同燃烧时间、不同火源位置和不同材料种类对炭化痕迹的影响,并利用新编译的FDS程序对实验进行重构,对比重构结果和实验结果,证明该程序可以用于重现木质类人造板材的炭化痕迹。     

减少木材加工企业粉尘污染的切削技术

木粉尘是我国木材加工企业环境污染及产生职业病的主要原因,为控制木粉尘产生量和散发量,笔者从切削及刀具技术角度探讨了降低空气中粉尘浓度的途径;指出粉尘是木材切削加工的产物,其产生量与散发量直接与木材切削方式、切削条件和刀具的结构密切相关;提出研究无屑、少屑和顺畅排屑等方面木材切削和刀具技术的重要性。综述了激光、高压水喷射等特种木材切削技术的研究及应用现状;介绍了金刚石木工铣刀及超薄硬质合金圆锯片等先进刀具技术;探讨并分析了影响木粉尘产生量的切削因素。指出我国大多数木材加工企业工作车间或作业场所的空气中,粉尘浓度严重超标,因此,研究和开发具有环保特点的绿色切削技术和木工刀具制造技术具有重要意义。     

高性能木材干燥测控系统的研制

在木制品生产行业中,木材干燥是木制品加工生产工序中的一个重要环节,而在木材干燥生产中突出的问题是木材变形、开裂、木材含水率不均匀和霉变、虫蛀等。针对上述问题,设计出以高性能AVR微控制器为核心,应用恒流源、高分子湿敏电容和动态补偿等技术的全自动木材干燥测控系统。实验结果表明,木材干燥测控系统能保证产品质量,提高生产效率,硬件可靠性高,有工程实用价值。     

木材燃烧过程气相中长寿命自由基的研究

利用研制的防火液对木材进行阻燃处理,通过ＥＳＲ自旋捕捉技术和热分析仪考察其燃烧特性,对木材燃烧后长寿命自由基进行研究。实验结果表明,阻燃处理后木材的燃烧过程中长寿命自由基浓度下降,同时阻燃剂加速木材的热分解,对木材有较好的阻燃效果     

竹地板与普通实木地板燃烧性能的锥形量热仪对比实验研究

随着竹地板的广泛应用,竹木地板的火灾燃烧性能也将引起人们的关注.本文采用锥形量热仪对竹木地板的引燃时间、热释放速率、总热释放和一氧化碳的产率及体积比浓度等燃烧性能与普通实木地板进行了比较研究.研究结果表明:在相同条件下,竹木地板试样的引燃时间较短,临界引燃辐射热通量较低,引燃危险相对较大;竹木地板试样燃烧中第一个热释放速率峰值出现的时间短,且峰值相对较大,其潜在的轰燃危险相对较大;此外,竹木试样的一氧化碳的产率和燃烧初期在烟气中的体积比浓度相对较大.     

Study of lignocellulosic biomass ignition properties estimation from thermogravimetric analysis

In the last decade, the use of renewable resources has increased significantly in order to reduce the energetic dependence on fossil fuels, as they have an important contribution to the global warning and greenhouse gasses effect. Because of that, research on biofuels has been increased in the last years as its characteristics of use match those of the conventional fuel's: solid biomass can be used instead of coals, and biodiesel could replace diesel. Research on solid biomass ignition properties has been considerably developed because of the amount of industrial accidents related to the treatment and use of solid biomass (self-ignition, dust explosions, etc.). On the other hand, thermogravimetric analysis (TGA) is becoming and important characterization technique as it can be used to determine a wide spectrum of properties, such as kinetics, composition, proximate analysis, etc. This research aims to combine thermal analysis and ignition properties, by using the TGA to obtain the elemental composition of lignocellulosic biomass and compare those results to Minimum Ignition Energy (MIE) values test output, so a relation between composition and MIE can be found.To achieve this aim, biomass samples from different origins have been used: oil palm wastes (empty fruit bunches, mesocarp fiber and palm kernel shell), agricultural wastes (straw chops) and forestry wastes (wood chips and wood powder). Also, raw materials and torrefied biomass were compared. The hemicellulose/cellulose ratio was calculated and compared to different flammability properties, finding out that the greater the ratio and the lower the onset temperature (temperature at which the pyrolysis reaction accelerates), the lower was the minimum ignition energy. From this basis it was possible to define “tendency areas” that grouped the samples whose MIE values were similar. Three tendency areas were found: high minimum ignition energy, medium minimum ignition energy, and low ignition energy.     

工伤保险中行业风险分类指标研究

简要介绍部分国家工伤保险差别费率情况;通过对相关数据的分析,提出我国工伤保险差别费率分类应以行业工伤事故死亡风险、重伤和轻伤风险、职业病风险和基金支出情况为指标和依据,尤其不能忽视行业轻伤和职业病风险指标;计算了我国近几年各行业工伤事故的个人死亡风险。建议:增加行业风险类别和工伤保险费率差距范围;完善工伤事故、职业病和工伤保险统计指标体系;工伤保险基金应加大对预防、康复、科研、教育培训工作的投入。     

企业职业伤害风险分级模型研究

我国严峻的安全生产形势主要原因之一是缺乏对企业强有力的安全监察.对比分析了国内外安全监察的差距,提出了分级安全监察的理念,并研究了支持分级安全监察的企业分级指标和模型,使用模型对调查企业数据进行计算、排序和分级,效果明显,该模型能够起对分级安全监察起到指导和支持作用.     

砷污染防治与含砷木材防腐剂的开发应用

综述了有色工金属工业的砷污染以及砷资源的综合利用。砷品订用于木材防腐和防治白蚁。大力发展木材防腐剂对消除砷害和保护生态环境都具有重大意义以及巨大的社会和经济效益。     

考虑不同场景的砖木结构古建筑火灾特征研究

为探明砖木结构古建筑火场下的特征,定量分析不同火灾场景下,建筑内部温度、烟气浓度等参数的变化。选取中国北方典型的砖木结构体系的四合院韩城党家村贾祖祠为研究对象,采用PyroSim建模分析,研究不同火灾场景下不同时间点的温度、CO浓度、能见度等变化。研究结果表明:贾祖祠主厢房较封闭,火灾中火源周围温度峰值可达750 ℃,CO质量浓度达到0.003 kg/m3,能见度几乎为0 m,风速最高为10 m/s且极不稳定;四合院中主厢房空间布局高,火灾中这些参数的影响会导致严重的轰燃现象发生,故此处发生火灾更易产生严重危害。对不同场景的砖木结构古建筑重要火灾因素发展规律的研究,能为古建筑的性能化防火提供科学参考依据。     

Quantification of impact of line markers on risk on transmission pipelines with natural gas

The paper presents a model for the assessment of the influence of line markers on risk on transmission pipelines with natural gas. The impact of line markers on risk is determined as a function of the line marker recognisability, which in turn depends on the ability to discern a line marker from a distance. The model is based on physical properties of line markers, especially on their colour, measures and the colour of the environment. These properties served to quantitatively assess the discernability of two most frequently encountered types of line markers. Calculated distances at which a particular line marker is discernible were compared to the average distances between two line markers. Risk reduction factors were derived from the comparison between the calculated results and the data from the appropriate hazardous event database. Results of the model indicated significant dependence of the risk reduction factor due to line markers on the distance between two line markers and the weather conditions. The model shows its flexibility through its distinct dependence on local conditions along the pipeline route. It can serve as a supplement to the existing models for quantitative risk assessment on pipelines used in natural gas transportation.     

Towards the adoption of low-cost rail level crossing warning devices in regional areas of Australia: A review of current technologies and reliability issues

This paper discusses major obstacles for the adoption of low-cost level crossing warning devices (LCLCWDs) in Australia and reviews those trialed in Australia and internationally. The argument for the use of LCLCWDs is that for a given investment, more passive level crossings can be treated, therefore increasing safety benefits across the rail network. This approach, in theory, reduces risk across the network by utilizing a combination of low-cost and conventional level crossing interventions, similar to what is done in the road environment. This paper concludes that in order to determine if this approach can produce better safety outcomes than the current approach, involving the incremental upgrade of level crossings with conventional interventions, it is necessary to perform rigorous risk assessments and cost-benefit analyses of LCLCWDs. Further research is also needed to determine how best to differentiate less reliable LCCLWDs from conventional warning devices through the use of different warning signs and signals. This paper presents a strategy for progressing research and development of LCLCWDs and details how the Cooperative Research Centre (CRC) for Rail Innovation is fulfilling this strategy through the current and future affordable level crossing projects.     

巷道木材火灾试验与数值模拟对比研究

通过应用煤炭科学研究总院重庆研究院某水平巷道全尺寸木材火灾实验和流体力学软件FULENT的数值模拟方法,研究风速为0.7m/s和1.1m/s时8,00kg木材燃烧以及风速为0.7m/s时,400kg木材燃烧火源下风侧各热物理参数变化规律。结果表明:3次燃烧试验和模拟均为富氧燃烧类型,验证了A.罗伯特燃烧判定准则的正确性。同时试验和模拟火源下风侧CO,CH4和H2危害性气体浓度和出口风门处温度,对比结果证明,巷道富氧类燃烧难以产生次生灾害。研究也表明,环境因素或巷道物理结构变化能改变巷道火灾燃烧类型。     

Changes in logging injury rates associated with use of feller-bunchers in West Virginia

Problem: It is well documented that logging is one of the most dangerous occupations and industries in which to work, and trees fellers are at greatest risk of injury. The objective of this study was to determine whether West Virginia (WV) logging companies experienced a reduction in injuries after beginning to use feller-bunchers (tree cutting machines, which replace some of the work done with a chainsaw) during harvesting operations. Methods: WV workers compensation claims and employment data from 1995 to 2000 were used to calculate injury rates. Injury trends in the rest of the WV logging industry, not using feller-bunchers, were also assessed. Results: For 11 companies, the pre-feller-buncher injury claims rate was 19.4 per 100 workers and the post-feller-buncher rate was 5.2 per 100 workers. This was a significant difference, with an adjusted rate ratio of 2.8 (95% CI: 1.8–4.5) of pre to post claims. Struck by injuries also showed significant decline, with the pre-feller-buncher injury rate being 3.8 (95% CI: 1.8–8.2) times as great as post-feller-buncher rate. During the time of the study, the injury rate rose in the rest of the WV logging industry. The average cost of a workers compensation claim in the WV logging industry during the time of the study was approximately $10,400. Impact on industry: As mechanization of logging tasks becomes more widespread, the WV logging industry as a whole may see substantial injury declines and a reduction in the total cost of injury claims. Struck by injuries, the most common and potentially fatal of logging injury types, appear to be particularly affected. However, logging operations in areas of very steep terrain where it is not possible to use these machines may need to rely on strategies other than feller-bunchers to reduce injuries.     

常用木质家具材料在不同氧浓度下的热分析

利用热重差热分析仪对几种常用木质家具材料在不同氧气浓度下的热分解和燃烧行为进行了研究。通过对TGA曲线,DTG曲线以及DTA曲线的分析,得出了氧气浓度对各种样品热分析结果的影响。求出了各样品的动力学参数,提出了相应的燃烧动力学反应模型。     

建筑装璜中几种常用板材热解特性及动力学研究

对建筑装璜中几种常用板材变工况的热解行为进行了热重分析（TG）和差分热重分析（DTG）研究。通过对TG和DTG曲线的分析,深入研究了影响样品热解过程的几个重要因素：升温速率、样品粒径和试样量对热解过程的影响,通过对十种模型的比较,发现热解过程符合两阶段一级反应模型。并得出了各阶段的动力学参数、表观活化能和频率因子。