Evaluation of Different Scales for Measurement of Perceived Physical Strain During Performance of Manual Tasks

The main objective of this study was to evaluate different scales of perceived strain during the performance of various physical tasks. A total of 52 male and female participants took part in 4 experiments to achieve the study objective. The results suggest that a bipolar comfort-discomfort scale is a more appropriate instrument than a discomfort scale for assessing cumulative physical stresses at work, especially at the beginning of the shift. For assessing discomfort at the end of the work shift, a unipolar scale may also be used. On the basis of the obtained results, red, green, and yellow zones are suggested to establish priorities for work redesign efforts in ergonomic control programs.     

Occupational stressors identified by small-scale,independent commercial crab pot fishermen

IntroductionWe interviewed fishermen to identify jobs and/or tasks of concern in order to guide and inform current ergonomic interventions.MethodsWe administered surveys to two groups of southeastern US commercial crab fishermen: a cohort contacted by telephone and fishermen recruited at 11 local fish houses. Fishermen were asked to rate physical stress of selected work tasks and conditions on a scale from 0 (no problem) to 10 (major problem). Fishermen were also asked open-ended questions about other work-issues of concern.ResultsFishermen who completed the survey (n = 91) were predominantly male (90%), white (96%), and over 40 years of age (71%). The five most physically strenuous tasks and conditions as rated by fishermen were pulling pots by hand (mean 6.4), rough weather (6.1) or rough water (6.2), unloading without mechanical assistance (5.8), and long work days (5.3). Task stress ratings with the most variability measured by the inter-quartile range (IQR) included: pulling pots by hand (IQR = 5), unloading without mechanical assistance (IQR = 5), gear maintenance (IQR = 4.5), and moving boxes and baskets on board (IQR = 4.5). Other situations that fishermen identified as a problem included: economic, off-shore work, declining industry, mental stress, environment, regulation, conflict with other commercial or recreational fishermen, issues with crew, sun (glare or burn), and breaking up frozen bait.ConclusionsIn general, stressful tasks identified from previous research were rated similarly by the fishermen surveyed. Development and testing of ergonomic interventions is ongoing.     

Measures of health,fitness, and functional movement among firefighter recruits

Aim. The purpose of this study was to examine the associations between various health and fitness measures and Functional Movement Screen? (FMS?) scores among 78 firefighter recruits. Methods. Relationships between FMS? scores and age, body mass index (BMI), sit and reach (S&R) distance, estimated maximal aerobic capacity (V˙_O2max), estimated one-repetition maximum squat (1RM-Squat_max), and plank endurance (%Plank_max) were examined. Results. Total FMS? scores were significantly correlated with BMI (r?=??0.231, p?=?0.042), estimated 1RM-Squat_max (r?=?0.302, p?=?0.007), and %Plank_max (r?=?0.320, p?=?0.004). Multiple regression analyses indicated that this combination of predictors significantly predicted (F(3, 74)?=?5.043, p?=?0.003) Total FMS? score outcomes and accounted for 17% of the total variance (R²?=?0.170). In addition, logistic regression analyses indicated that estimated 1RM-Squat_max also significantly predicted (χ²?=?6.662, df?=?1, p?=?0.010) FMS? group membership (≤14 or ≥15). Conclusion. These results suggest that the health and fitness measures of obesity (BMI), bilateral lower extremity strength (estimated 1RM-Squat_max), and core muscular endurance (%Plank_max) are significantly associated with functional movement patterns among firefighter recruits. Consequently, injury prevention programs implemented among firefighter recruits should target these aspects of health and fitness.     

Estimation of Aerobic Capacity and Determination of Its Associated Factors Among Male Workers of Industrial Sector of Iran

Introduction. The aim of this study was to estimate maximal aerobic capacity (V_O2max), to determine its associated factors among workers of industrial sector of Iran and to develop a regression equation for subjects’ V_O2max. Methods. In this study, 500 healthy male workers employed in Shiraz industries participated voluntarily. The subjects’ V_O2max was assessed with the ergocycle test according to the Åstrand protocol. Required data was collected with a questionnaire covering demographic details (i.e., age, job tenure, marital status, education, nature of work, shift work, smoking and weekly exercises). Results. The subject’s mean V_O2max was 2.69 ± 0.263 L/min. The results showed that there was an association between V_O2max and age, BMI, hours of exercise and smoking, but there was no association between V_O2max and height, weight, nature of work and working schedule. On the basis of the results, regression equations were developed to estimate V_O2max. Conclusion. Final regression equation developed in this study may be used to estimate V_O2max reliably without the need to use other laboratory instruments for aerobic measurement.     

Cardiovascular Load During Summer Work of Two Age Groups of Van-Rickshaw Pullers in West Bengal,India

Van-rickshaw is a popular mode of transport of people and merchandise in developing countries. The purpose of this study was to assess the effect of age on cardiovascular load of van-rickshaw pullers in the summer season (March-June) in real situations. In 142 participants, divided into 2 age groups (25-40 and 41-55 years), cardiovascular load was assessed on the basis of working and partial recovery heart rate (HR), predicted maximal HR, working maximal HR, average working HR, percentage of reserved HR, sum of recovery heart beats, percentage of recovery, relative and net cardiac cost, etc. Except for percentage of recovery, all parameters differed significantly between the groups and were significantly correlated with age. As this activity is very stressful, it places a heavy demand on the cardiovascular system. Therefore, age is an important factor for sustainability of the work, especially in a hot environment. Some ergonomic interventions are necessary to reduce cardiovascular load.     

A dental stool with chest support reduces lower back muscle activation

Activation of back musculature during work tasks leads to fatigue and potential injury. This is especially prevalent in dentists who perform much of their work from a seated position. We examined the use of an ergonomic dental stool with mid-sternum chest support for reducing lower back muscle activation. Electromyography of lower back extensors was assessed from 30 dental students for 20?s during three conditions in random order: (a) sitting upright at 90° of hip flexion on a standard stool, (b) leaning forward at 80° of hip flexion on a standard stool, and (c) leaning forward at 80° of hip flexion while sitting on an ergonomic stool. Muscular activity of the back extensors was reduced when using the ergonomic stool compared to the standard stool, by 33–50% (p?相似文献   

The effect of an ergonomic intervention on musculoskeletal, psychosocial, and visual strain of VDT data entry work: the United States part of the international study.

The United States MEPS (musculoskeletal--eyestrain--psychosocial--stress) study consisted of 1 group of 28 female data entry operators. The intervention was in 3 parts: workstation redesign (including advanced ergonomic chairs, motorized adjustable workstations, advanced adjustable keyboards, adjustable copyholders, adjustable footrests, monitor support surfaces) and ergonomic training/coaching and corrective lenses. After the intervention, statistically significant reductions in physical signs (trigger points, neck and shoulder mobility), subjective reports of intensity and frequency of musculoskeletal pain, and subjective reports of visual problems were observed. Static load during the work sample, as assessed by experts, improved after the intervention as did measured postural angles of head and trunk and subjective assessment of users of ergonomic characteristics of the workplaces. For all of these measures, improvements observed 1 month after intervention were also observed in the 1-year follow-up. Trapezius load, as assessed by electromyography (EMG), decreased after intervention, but then increased in the follow-up. The increase was interpreted as a calibration problem.     

The Effect of an Ergonomic Intervention on Musculoskeletal,Psychosocial and Visual Strain of VDT Entry Work: Organization and Methodology of the International Study

This special issue of the International Journal of Occupational Safety and Ergonomics (JOSE) reports the results from an extensive multinational and multidisciplinary collaborative investigation of the impacts on visual display terminal (VDT) work of musculoskeletal, visual, ergonomic, and psychosocial factors. For brevity, this effort has been referred to as the MEPS project (musculoskeletal—eyestrain—psychosocial—stress). This paper lays out the basic methodological structure of the study. The study was conducted in 4 countries utilizing VDT data entry workers as the primary subject population. A battery of objective and subject assessment measures, including muscle load, visual function, physical and visual strain, postural, ergonomic and psychosocial factors, were assessed at 3 different points in time. A pre-test was given prior to an ergonomic intervention. Two post-tests were given 1 month and 1 year after the ergonomic intervention.     

Comparison of Canadian firefighters and healthy controls based on submaximal fitness testing and strength considering age and gender

Introduction. Few studies have addressed whether firefighters are fitter than the general population and possess sufficient levels of aerobic capacity and muscle strength to perform on-duty tasks in a safe and efficient manner, considering age and gender. We aimed to evaluate the fitness levels of Hamilton firefighters, and to determine the effects of age and gender. Methods. In total, 89 participants were recruited. The modified Canadian aerobic fitness test was used to determine participants’ estimated maximal oxygen consumption (V_O2max) levels. For upper and lower body strength levels, a calibrated J-Tech hand-held dynamometer and a National Institute for Occupational Safety and Health (NIOSH) lifting device was used respectively. Results. Firefighters’ mean (SD) V_O2max level was 40.30?±?6.25?ml·kg^?1·min^?1. Age proved to have a statistically significant impact on V_O2max (p?<?0.001). Gender displayed statistically significant effects on strength levels. Firefighters’ age was the only statistically significant independent variable, and accounted for 61.00% of the variance in firefighters’ aerobic capacity levels. Conclusions. Firefighters possessed somewhat similar aerobic capacities but much higher levels of body strength when compared with the general population. With age, firefighters’ aerobic capacities decreased; however, their upper and lower body strength levels remained the same.     

Explosion characteristics of micron- and nano-size magnesium powders

Explosion characteristics of micron- and nano-size magnesium powders were determined using CSIR-CBRI 20-L Sphere, Hartmann apparatus and Godbert-Greenwald furnace to study influence of particle size reduction to nano-range on these. The explosion parameters investigated are: maximum explosion pressure (P_max), maximum rate of pressure-rise (dP/dt)_max, dust explosibility index (K_St), minimum explosible concentration (MEC), minimum ignition energy (MIE), minimum ignition temperature (MIT), limiting oxygen concentration (LOC) and effect of reduced oxygen level on explosion severity. Magnesium particle sizes are: 125, 74, 38, 22, 10 and 1 μm; and 400, 200, 150, 100, 50 and 30 nm. Experimental results indicate significant increase in explosion severity (P_max: 7–14 bar, K_St: 98–510 bar·m/s) as particle size decreases from 125 to 1 μm, it is maximum for 400 nm (P_max: 14.6 bar, K_St: 528 bar·m/s) and decreases with further decrease of particle size to nano-range 200–30 nm (P_max: 12.4–9.4 bar, K_St: 460–262 bar·m/s) as it is affected by agglomeration of nano-particles. MEC decreases from 160 to 30 g/m³ on decreasing particle size from 125 to 1 μm, its value is 30 g/m³ for 400 and 200 nm and 20 g/m³ for further decrease in nano-range (150–30 nm). MIE reduces from 120 to 2 mJ on decreasing the particle size from 125 to 1 μm, its value is 1 mJ for 400, 200, 150 nm size and <1 mJ for 50 and 30 nm. Minimum ignition temperature is 600 °C for 125 μm magnesium, it varies between 570 and 450 °C for sizes 38–1 μm and 400–350 °C for size range 400–30 nm. Magnesium powders in nano-range (30–200 nm) explode less violently than micron-range powder. However, likelihood of explosion increases significantly for nano-range magnesium. LOC is 5% for magnesium size range 125–38 μm, 4% for 22–1 μm, 3% for 400 nm, 4% for 200, 150 and 100 nm, and 5% for 50 and 30 nm. Reduction in oxygen levels to 9% results in decrease in P_max and K_St by a factor of 2–3 and 4–5, respectively, for micron as well as nano-sizes. The experimental data presented will be useful for industries producing or handling similar size range micron- and nano-magnesium in order to evaluate explosibility of their magnesium powders and propose/design adequate safety measures.     

Comparisons of ergonomic evaluation tools (ALLA,RULA, REBA and OWAS) for farm work

Introduction. The purpose of this study was to validate the agricultural lower limb assessment (ALLA) ergonomic checklist, which was developed for various agricultural tasks in Korea. Methods. One hundred and ninety-six working postures were selected from the real agricultural tasks to verify ALLA, a lower limb body posture assessment tool, and then evaluated by 16 ergonomic experts. Hit rate, quadratic weighted κ, one-way analysis of variance and t-test analyses were applied to compare ALLA with other assessment tools. Results. ALLA analysis had a superior hit rate with ergonomic expert assessment compared with other assessment tools. Quadratic weighted κ analysis also showed that ALLA provided superior estimates of risk levels for farm working postures. Discussion. ALLA would be an appropriate assessment tool to estimate risk factors for various lower limb body postures which frequently occur in agricultural tasks in Korea. ALLA is a simple and accurate risk assessment tool that could be usefully applied to identify and mitigate risk factors and work-related musculoskeletal disorders in agricultural tasks, and also to evaluate the effects of control and intervention for working conditions.     

Combustion characteristics of pure aluminum and aluminum alloys powders

In this work, the explosion and combustion characteristics of aluminum and some aluminum alloys AlSi7Mg0.6, AlSi10Mg, AlMg5 under powders conditioning were studied. The idea was to compare the combustion of pure aluminum and aluminum alloys. The Minimum Ignition Energy (MIE) and explosion severity ΔP_max and (dP/dt)_max which represents the dust explosion parameters were measured for all powders using Hartman tube and 20 L spherical bomb. The particles temperature and flame temperature were determined by using IR pyrometer and spectroscopy respectively. The results showed that pure aluminum was more sensitive and severe than its alloys. MIE were: 4 mJ for pure aluminum, 13–23 mJ for aluminum alloys. For severity parameters, the overpressure ΔP_max were around 7–8 bars with maximum rate of pressure rise at 1170 bar/s for aluminum and 5–7 bars with 250–360 bar/s for alloys. However, it has been observed that flame temperatures were similar for aluminum and alloys and vary around 2800–3300 K as a function of concentration.     

Niacin,lycopodium and polyethylene powder explosibility in 20-L and 1-m3 test chambers

An experimental program has been undertaken to investigate the explosibility of selected organic dusts. The work is part of a larger research project aimed at examination of a category of combustible dusts known as marginally explosible. These are materials that appear to explode in laboratory-scale test chambers, but which may not produce appreciable overpressures and rates of pressure rise in intermediate-scale chambers. Recent work by other researchers has also demonstrated that for some materials, the reverse occurs – i.e., values of explosion parameters are higher in a 1-m³ chamber than one with a volume of 20 L. Uncertainties can therefore arise in the design of dust explosion risk reduction measures.The following materials were tested in the current work: niacin, lycopodium and polyethylene, all of which are well-known to be combustible and which cover a relatively wide range of explosion consequence severity. The concept of marginal explosibility was incorporated by testing both fine and coarse fractions of polyethylene. Experiments were conducted at Dalhousie University using the following equipment: (i) Siwek 20-L explosion chamber for determination of maximum explosion pressure (P_max), volume-normalized maximum rate of pressure rise (K_St), and minimum explosible concentration (MEC), (ii) MIKE 3 apparatus for determination of minimum ignition energy (MIE), and (iii) BAM oven for determination of minimum ignition temperature (MIT). Testing was also conducted at Fauske & Associates, LLC using a 1-m³ explosion chamber for determination of P_max, K_St and MEC. All equipment were calibrated against reference dusts, and relevant ASTM methodologies were followed in all tests.The explosion data followed known trends in accordance with relevant physical and chemical phenomena. For example, P_max and K_St values for the fine sample of polyethylene were higher than those for the coarse sample because of the decrease in particle size. MEC values for all samples were comparable in both the 20-L and 1-m³ chambers. P_max and K_St values compared favorably in the different size vessels except for the coarse polyethylene sample. In this case, K_St determined in a volume of 1 m³ was significantly higher than the value from 20-L testing. The fact that the 20-L K_St was low (23 bar m/s) does not indicate marginal explosibility of the coarse polyethylene. This sample is clearly explosible as evidenced by the measured values of MEC, MIE, MIT, and 1-m³ K_St (at both 550 and 600 ms ignition delay times).     

Psychosocial and Ergonomic Factors,and Their Relation to Musculoskeletal Complaints in the Swedish Workforce

A random sample of 1 000 subjects (20–65 years old) from the national population of Sweden received a questionnaire; 70% (n = 695) replied, of whom 532 were occupationally active. Female gender, working with neck and/or body bent forward, arms above shoulders, and precision work tasks were predictors of musculoskeletal symptoms. Neck, shoulder, and upper back symptoms were more common in a strained situation at work (high demands, low control) (adjusted odds ratios [adjOR] 2.76, 2.80, and 2.26, respectively). Among females, neck and shoulder symptoms were more common in an iso-strain situation (high demands, low control and low social support) (adjOR 4.43 and 3.69, respectively), and low back symptoms were more common at low social support combined with a passive work situation (adjOR 3.35). No associations were found between iso-strain model and symptoms among males. In conclusion, iso-strain work situation was associated with neck symptoms among females, even when controlling for ergonomic factors.     

Ergonomic interventions for prevention of work-related musculoskeletal disorders in a small manufacturing assembly line

This study involves performing improvements in workstation specification using a three-dimensional human modeling tool and proposing well-balanced work scheduling (WBWS) to prevent work-related musculoskeletal disorders (WMSDs) in a small manufacturing plant. To analyze risk factors of WMSDs, various tasks at 10 different types of workstation were evaluated with detailed motion analysis using a customized checklist. Questionnaires were administered to 27 workers to evaluate symptoms related to WMSDs. Revised workstation specifications were suggested based on anthropometric characteristics of workers using before–after analyses as an engineering control. Additionally, WBWS was proposed as an administrative control to avoid continuous physical stress on specific body parts in repetitive tasks. A software tool for WBWS was developed for convenient and easy application. The results of the study may aid managers in applying ergonomic interventions with time and cost savings, and enhance worker satisfaction and motivation due to improvements in working conditions to prevent WMSDs.     

Ergonomics in Practice: Physical Workload and Heat Stress in Thailand

This study consists of assessments of the thermal environment and physio-logical strain in tasks associated with airport, construction, and metal jobs. The number of male and female participants was 108. Environmental heat stress was evaluated with the WBGT index. Physiological strain was evaluated by the relative cardiovascular load (%CVL) based on the measurements of heart rate. Also the increase of body temperature, weight loss, and perceived discomfort were determinated. At work sites the assessments lasted for 2 to 4 hrs for each participant. The mean physiological strain exceeded the level of 30%CVL. Severe peaks (over 60%CVL) were observed in specific tasks being in agreement with perceived discomfort ratings. The increase of body temperature and weight loss in most cases remained within acceptable limits. For the most strenuous tasks, various ergonomic improvements were developed in consultation with workers and managers.     

Work environment and the well-being of clerical and VDT workers

This paper explores the relationships between extent of video display terminal usage, perceptions of the physical work environment, task characteristics, and workers' health and well-being among a group of 1032 female office clerical workers. Data are drawn from responses to a 30-minute questionnaire administered at four employment sites during 1981 and 1982. All-day terminal users reported significantly higher levels of job and physical environment stressors than part-day VDT users, typists and non machine-interactive clerical workers. Reports of musculo-skeletal strain and dissatisfaction were also highest among all day terminal users. Part-day VDT users, typists and clerks all reported relatively similar levels of job and physical working conditions, health symptoms and job satisfaction. No significant differences between any of the groups were observed for gastrointestinal, respiratory, psychological and other non-specific health complaints. Typists and clerical workers who also held supervisory positions reported fewer stressors and greater job satisfaction than workers with no supervisory tasks; however there were no such differences between supervisors and non-supervisors engaged in all-day VDT work. Implications of these findings for further research and for job redesign strategies to alleviate the potentially stressful aspects of office automation are discussed.     

Cardiovascular Strain of Sawmill Workers in South-Western Nigeria

This study aimed to assess cardiovascular strain during sawmilling operations in terms of physical workload, based on heart rate changes. We measured resting and working heart rates and calculated cardiovascular load (%CVL), cardiovascular strain (%CVS) and relative heart rate (%RHR) in 35 sawmill workers. Based on heart rate only, the work in sawmills was classified as very heavy and extremely heavy. Similarly, a high-level category was recorded for %CVL and a very high range for %CVS. Thus, the workload in sawmill operations is usually very high and can lead to physiological strain of the workers. There is a need to redesign the work content of this occupation to prevent excessive strain in the workers, as this will increase their productivity and reduce their health risk.     

Self-Rated Physical Loads of Work Tasks Among Firefighters

Objectives. The present study sought to identify firefighters’ rated physical demands for the most frequently occurring work tasks and to determine if the ratings differed between full-time and part-time firefighters to help create a basis for the development of physical employment tests for firefighters. Methods. An extensive questionnaire was completed by 125 and 68 firefighters in 2000 and 2010, respectively. The data were analysed with the Mann-Whitney U test and binominal test and ranked on the basis of the responses in each category. Results. Significant differences were seen between the full- and part-time firefighters. The work tasks rated as the most physically strenuous in terms of aerobic fitness, muscle strength, work posture and body control by most respondents were smoke diving upstairs (carrying a hose), victim rescue in different ways, carrying a stretcher over terrain and pulling a hose. Conclusions. Physically strenuous work tasks should be included in the end-point performance variables used to select physical performance tests for firefighters. The part-time firefighters with no experience in several of the work tasks suggests that work-related exercises are important if both groups of firefighters are expected to do similar work.     

Ergonomic analysis of working postures using OWAS in semi-trailer assembly,applying an individual sampling strategy

In semi-trailer assembly, workers are exposed to several physical risk factors. Awkward working postures have not yet been investigated in semi-trailer assembly, although they are known to be a major risk factor for musculoskeletal disorders. We therefore conducted a comprehensive ergonomic analysis of working postures using the Ovako working posture analysing system (OWAS), with an individual sampling strategy. The postural load in semi-trailer assembly was assessed on the basis of 20,601 observations of 63 workers executing a representative set of nine work tasks. According to the OWAS, the postural load of various working postures and body part positions may have a harmful effect on the musculoskeletal system. We therefore give examples of corrective measures that could improve awkward working postures. Applying an individual sampling strategy was revealed to have advantages over a collective strategy, so this is recommended for future ergonomic analyses.