采空区隐蔽火源探测及声学法煤温感知新技术探讨*

为精准判定采空区等地下隐蔽火区高温点的位置和范围,综述现有采空区煤自燃温度探测技术,重点总结和分析红外探测法、分布式光纤测温法、指标气体探测法、热电偶测温技术以及同位素测氡法等煤层测温手段的研究进展与技术瓶颈,着重研究声学法测温的技术原理及实现方式;结合分层建模和插值建模的优点,探讨声学测温技术在采空区松散煤体煤温反演探测应用中的可行性。结果表明:受限于煤层赋存及开采方式等煤矿现场的实际情况,准确反演和精确定位采空区等隐蔽火源高温点和位置的探测方法和装备技术有待进一步发展;声学法探测松散煤体自燃温度的基本原理、传播衰减规律、温度场重构模型及其关键特征参量需进一步准确获取;综合考量声学测温技术原理和实现过程,该技术适用于采空区松散煤体自燃火区的环境特征,有望成为采空区隐蔽火源位置精准探测发展前景良好的探测方法。     

A global index of acoustic assessment of machines-results of experimental and simulation tests

A global index of machines was developed to assess noise emitted by machines and to predict noise levels at workstations. The global index is a function of several partial indices: sound power index, index of distance between the workstation and the machine, radiation directivity index, impulse and impact noise index and noise spectrum index. Tests were carried out to determine values of the global index for engine-generator; the inversion method for determining sound power level was used. It required modelling each tested generator with one omnidirectional substitute source. The partial indices and the global index were simulated, too. The results of the tests confirmed the correctness of the simulations.     

Estimating surface acoustic impedance with the inverse method

Sound field parameters are predicted with numerical methods in sound control systems, in acoustic designs of building and in sound field simulations. Those methods define the acoustic properties of surfaces, such as sound absorption coefficients or acoustic impedance, to determine boundary conditions. Several in situ measurement techniques were developed; one of them uses 2 microphones to measure direct and reflected sound over a planar test surface. Another approach is used in the inverse boundary elements method, in which estimating acoustic impedance of a surface is expressed as an inverse boundary problem. The boundary values can be found from multipoint sound pressure measurements in the interior of a room. This method can be applied to arbitrarily-shaped surfaces. This investigation is part of a research programme on using inverse methods in industrial room acoustics.     

声发射并行检测技术在吸附塔检验中的应用

为了实现 10台吸附塔缺陷动态检测,提高检验的效率,采用声发射并行检测技术对两台吸附塔进行声发射同时检测.在吸附塔升压和保压过程中,对声发射信号进行监测.在排除各种噪声源的干扰后得出:10台吸附塔在一次加压检测过程均未检测到有活性的缺陷存在,说明吸附塔安全状况良好,可以安全使用,无须进行第二次加载检测.声发射并行检测技...     

Study on leak-acoustics generation mechanism for natural gas pipelines

In order to figure out the principles of acoustic leak detection for natural gas pipelines, a study on the leak-acoustics generation mechanism is carried out. The aero-acoustics generation mechanism is analyzed and when leakage occurs the wave equations of sonic sources are developed. The leak-acoustics generated by the quadrupole and dipole sonic sources are then simulated to obtain the laws of the acoustic characteristics. The simulation data are compared with the experimental data to verify the simulation accuracy under variable operating conditions. The results show that the quadrupoles and the dipoles generated by turbulent fluctuations cause leak-acoustics; the main component of pressure perturbations acquired by the dynamic pressure sensor is acoustic perturbations; both the simulation method and the experimental method can be applied to study the leak-acoustics generation mechanism of natural gas pipelines.     

声发射检测灵敏度校准声源实验分析

在声发射技术的应用中,传感器的工作频率和灵敏度对AE检测的结果具有决定性的作用,传感器的校准是AE定量研究的基础,也是声发射检测技术研究中的重要课题。根据二级校准的相关要求设计了三个不同声源的实验:落球、断铅和压断毛细玻璃管法。通过重复性实验,测量了不同大小的钢球从不同高度下落;不同粗细、硬度以及不同长度的铅芯的断裂;不同粗细的毛细玻璃管被压断产生的脉冲声源,分别比较以上三个实验在不同状态条件下产生的脉冲声源信号,分析其实时特征和频谱特征(峰值,上升时间),通过计算确定其不确定度和稳定度,总结优化操作方法,同时分析了实验误差。在此基础上得出最适合做声发射传感器灵敏度校准的脉冲声源,为声发射传感器校准中的参考声源提供性能评判的依据。     

金属压力容器声发射源特性的研究

通过对多台报废压力容器进行超压试验的声发射检测和对 5 0 0多台压力容器现场声发射检验数据的分析 ,给出了现场压力容器检验可能遇到的多种声发射源的特性。这些声发射源包括裂纹、夹渣、未熔合、未焊透等焊接缺陷的开裂和增长、残余应力释放、氧化皮的剥落、结构摩擦、泄漏、风吹、雨滴撞击和电子噪音等。笔者对这些声发射源的定位、分布和关联特性分别进行了分析与研究 ,并列举了大量的实例。     

基于ACE法和模拟退火算法的土层等效参数反演

提出了一种基于ACE法和模拟退火算法的土层参数反演方法:一方面先用均匀试验构造出输入数据与输出数据,再利用ACE非参数回归方法构造两者之间的高效响应面,然后通过响应面关系进行插值运算来得出对应参数的响应值;另一方面根据响应面的关系构造出反演目标函数,利用模拟退火法对目标函数进行寻优计算,从而能避免寻优过程中的目标函数值...     

金属压力容器水压试验声发射检测

通过对容积为504．94m3的某型号压力容器出厂前水压试验的声发射检测,分析了其在升压和保压过程中的声发射信号特征及其来源。结合AE信号参数、波形及定位图分析,对该容器进行了声发射活性评价,确定需要后续复检的强活性区域。文章为压力容器的声发射检测和安全评价提供了理论指导和参考数据。     

16Mn钢疲劳过程中的声发射特性研究

根据有关标准,设计加工了16Mn钢试样,并运用LOCAN320声发射仪、MTS810疲劳实验机和声发射传感器,用3种不同的试验方案,采集16Mn钢材料疲劳过程中的声发射(AcousticEmission,AE)信号特征参数,用于分析其疲劳过程中的声发射特性。重点探讨了16Mn钢材料在低周疲劳全过程中释放的声发射信号特征参数变化规律,得出声发射技术可用来评估16Mn钢材料的损伤程度,进而预测其疲劳寿命的结论。此外,充分利用试验中得到的不同疲劳载荷条件下试样的疲劳寿命,根据成组法修正了矩形截面试样16Mn钢材料的S-N曲线,经验证与实际结果吻合性较好。     

加卸荷条件下岩石力学特性与声发射特征

为了探究真三轴复杂应力变化条件下岩石强度及破坏模式,通过真三轴卸荷扰动测试系统对砂岩试件进行不同第二主应力加卸荷试验,讨论在加卸荷过程中岩石的力学特性及声发射特征。试验结果表明:第二主应力的增加对试件的承载能力起到先增强后弱化的效果;不同第二主应力加卸荷声发射能量及累计振铃计数变化趋势大体一致,耗散能量比在载荷达到岩石损伤强度时突增;声发射能量峰值提前于试件轴向应力跌落,声发射能量和累计振铃计数大幅突增可作为岩石破坏的前兆;在低载荷下岩石中活动主要是裂隙压密与发育,在达到岩石损伤强度后岩石中的活动主要是裂纹贯通形成破裂面,砂岩试件声发射定位点集中区域与试件主要破裂面基本吻合。     

Experimental study on leak detection and location for gas pipeline based on acoustic method

The leak of gas pipelines can be detected and located by the acoustic method. The technologies of recognizing and extracting wave characteristics are summarized in details in this paper, which is to distinguish leaking and disturbing signals from time and frequency domain. A high-pressure and long distance leak test loop is designed and established by similarity analysis with field transmission pipelines. The acoustic signals collected by sensors are de-noised by wavelet transform to eliminate the background noises, and time-frequency analysis is used to analyze the characteristics of frequency domain. The conclusion can be drawn that most acoustic signals are concentrated on the ranges of 0-100 Hz. The acoustic signal recognition and extraction methods are verified and compared with others and it proves that the disturbing signals can be efficiently removed by the analysis of time and frequency domain, while the new characteristics of the accumulative value difference, mean value difference and peak value difference of signals in adjacent intervals can detect the leak effectively and decrease the false alarm rate significantly. The formula for leak location is modified with consideration of the influences of temperature and pressure. The positioning accuracy can be significantly improved with relative error between 0.01% and 1.37%.     

Validation of a questionnaire about the perception of occupational biohazard in Spanish companies

Objectives. The aim of this work was to develop, validate and test a new questionnaire to assess the biological risk in workers with intentional or unintentional exposure to biological agents. Methods. A questionnaire including 34 questions was developed to study the perception of workers against occupational biohazard. Content Validity Index (CVI) and Content Validity Ratio (CVR) were calculated for the analysis of content validity. A pilot study was carried out with 60 workers from 17 companies performing analysis of Cronbach's α to assess the internal consistency or reliability. Results. A total of 518 workers from 51 Spanish companies in which there is exposure to biological agents participated in the study yielding a response rate of 90%. The final questionnaire obtained a Cronbach's α > 0.759 with a stable test–retest result. The questionnaire validation demonstrates that it could be used to evaluate the biological risks and help the prevention of occupational accidents and diseases. Discussion. This study has validated the need to evaluate worker's perception against occupational risks, as well as the application of prevention methods and protective equipment. It is a first step towards developing an occupational biohazards assessment method including all the requirements set by the European Health and Safety Strategy 2013–2020.     

压缩空气蛋白泡沫抑制液体火的有效性研究

压缩空气泡沫灭火技术是一项新型灭火技术,为验证压缩空气泡沫系统与蛋白泡沫灭火剂结合使用时是否可以成为含PFOS泡沫灭火剂的替代技术,开展了压缩空气蛋白泡沫抑制液体火有效性试验.在对压缩空气蛋白泡沫的泡沫性能进行分析的基础上,进一步采用标准油盘火试验模型对压缩空气蛋白泡沫的灭火性能进行评估,并与吸气式泡沫产生系统进行了对比.试验结果表明压缩空气蛋白泡沫具有优异的泡沫性能,同时具备抑制非水溶性液体火的有效性,可以作为含PFOS泡沫灭火剂的替代技术.     

Polish adaptation of three self-report measures of job stressors: the Interpersonal Conflict at Work Scale,the Quantitative Workload Inventory and the Organizational Constraints Scale

Aim. The objective of the present study was to test the psychometric properties, reliability and validity of three job stressor measures, namely, the Interpersonal Conflict at Work Scale, the Organizational Constraints Scale and the Quantitative Workload Inventory. Method. The study was conducted on two samples (N?=?382 and 3368) representing a wide range of occupations. The estimation of internal consistency with Cronbach's α and the test–retest method as well as both exploratory and confirmatory factor analyses were the main statistical methods. Results. The internal consistency of the scales proved satisfactory, ranging from 0.80 to 0.90 for Cronbach's α test and from 0.72 to 0.86 for the test–retest method. The one-dimensional structure of the three measurements was confirmed. The three scales have acceptable fit to the data. The one-factor structures and other psychometric properties of the Polish version of the scales seem to be similar to those found in the US version of the scales. It was also proved that the three job stressors are positively related to all the job strain measures. Conclusions. The Polish versions of the three analysed scales can be used to measure the job stressors in Polish conditions.     

Comparative study on standardized ignition sources used for explosion testing

For the determination of safety characteristics of gases, vapors and dusts different types of ignition sources are used in international standards and guidelines. The paper presents test results of a comparative calorimetric and visual study between four different types of ignition sources. The ignition procedures were analyzed visually with a high-speed camera and electric recordings. In addition to that, the influence of the electrode-orientation, -distance as well as ignition energy on the reproducibility of the exploding wire igniter was tested.The exploding wire is already in use for standardized determination of safety characteristics of gases, first tests on the suitability of the exploding wire igniter for dust testing have been carried out but are not standardized yet. Using the exploding wire, the ignition energy can be varied from 2 J to 10 000 J (2 x 5000 J) and thus it could be used for gases, vapors, dusts and hybrid mixtures. Moreover it can be used at high initial pressures and it is the only ignition source with an easily measurable ignition energy release. Furthermore, it does not introduce another chemical reaction into the system.Finally, a proposal for a standard ignition source for explosion tests on hybrid mixtures is derived from the test results.     

Validation of the UN test method N.5

Many substances react with water in such a way that flammable gases are formed. For transport issues this reaction may possess a considerable hazard especially if the cargo is wetted by rain or by water from other sources. In the UN Recommendations on the Transport of Dangerous Goods these kinds of problems are addressed. The UN test N.5 “Test method for substances which in contact with water emit flammable gases” corresponds to this hazard. Classification according to the test method is done by measurement of the gas evolution rate of the flammable gas by any suitable procedure. At BAM a gravimetric approach is used to measure the gas evolution rate. In this paper we present the evaluation of the apparatus by means of an absolute calibration routine utilizing a reaction where a known amount of gas is produced as well as the evaluation of important parameters influencing the gas evolution rate using different substances. It can be shown that the apparatus is capable of measuring absolute gas volumes as low as 6 mL with an acceptable error of about 17% as determined from the reaction of Mg with demineralized water.     

生物质液化燃油代用燃料的应用及展望

主要介绍了生物质液化燃油代用燃料的概念、特点及优势,分析了其它几种代用燃料优势与不足,并阐明了生物质液化燃油代用燃料发展的必然趋势.     

交变电场中偶极荷电粒子电凝并的理论研究

根据碰撞理论 ,推导出偶极荷电粒子在交变电场中的电凝并系数 ,并利用 Williams求声凝并的方法 ,将其简化。若忽略粒子的惯性 ,则电凝并系数与交变电场的频率无关。     

Integrated leakage detection and localization model for gas pipelines based on the acoustic wave method

With the development of natural gas transportation systems, major accidents can result from internal gas leaks in pipelines that transport high-pressure gases. Leaks in pipelines that carry natural gas result in enormous financial loss to the industry and affect public health. Hence, leak detection and localization is a major concern for researchers studying pipeline systems. To ensure the safety and improve the efficiency of pipeline emergency repair, a high-pressure and long-distance circular pipe leakage simulation platform is designed and established by similarity analysis with a field transmission pipeline, and an integrated leakage detection and localization model for gas pipelines is proposed. Given that the spread velocity of acoustic waves in pipelines is related to the properties of the medium, such as pressure, density, specific heat, and so on, this paper proposes a modified acoustic velocity and location formula. An improved wavelet double-threshold de-noising optimization method is also proposed to address the original acoustic wave signal collected by the test platform. Finally, the least squares support vector machine (LS-SVM) method is applied to determine the leakage degree and operation condition. Experimental results show that the integrated model can enhance the accuracy and precision of pipeline leakage detection and localization.