Test Method for Retractable Type Fall Arresters Designed for Horizontal Use

Retractable type fall arresters are designed to protect against falls from a height of people who need freedom of vertical movement. The practice of fall protection shows that the devices are also used to protect people who work on flat roofs. This application creates quite different operating conditions for the devices. In some situations those conditions can be dangerous for users. The article presents a theoretical analysis of phenomena occurring during a fall arrest with retractable type fall arresters arranged horizontally. The analysis was verified with laboratory tests. The article presents a proposal for the construction of a test stand and a test method for estimating retractable type fall arresters intended for horizontal use.     

The Influence of Anchor Devices on the Performance of Retractable Type Fall Arresters Protecting Against Falls From a Height

Retractable type fall arresters are part of the equipment used for protecting people against falls from a height. They are an intermediate part between full body harness worn by a man and the structural anchor at the worksite. The most important task of retractable type fall arresters is to arrest people’s falls and to reduce their harmful consequences. Information received from users as well as laboratories testing protective equipment indicates that the performance of such equipment is incorrect under specific conditions. The paper is concerned with an analysis of the conditions in which retractable type fall arresters demonstrate intermittent performance and with an explanation of that phenomenon. The results of tests investigating anchor devices and the performance of retractable type fall arresters are presented. External and internal factors contributing to intermittent performance have been determined and guidelines for safer use of these devices have been developed.     

Locking of Retractable Type Fall Arresters—Test Method and Stand

Retractable type fall arresters are very effective personal equipment protecting against falls from a height. These devices are used under different atmospheric conditions and in the presence of various types of industrial pollution. For this reason appropriate locking after conditioning simulating extreme conditions of a worksite is one of the essential characteristics of retractable type fall arresters. This article presents the requirements for locking of the devices. A previously used locking test method and its disadvantages are discussed. The article suggests an improved test method and test equipment. Measurement of the test mass acceleration is the most important improvement introduced into the test method. The article shows laboratory tests used to verify the method, which turned out to be a valuable source of information concerning the performance of retractable type fall arresters.     

Dynamic Performance of Horizontal Flexible Anchor Lines During Fall Arrest— A Numerical Method of Simulation

Designing fall arrest systems, which contain horizontal flexible anchor lines is an important technical problem related to the safety of people who work at a height and need horizontal freedom of movement. The article presents a numerical simulation of the dynamic performance of horizontal flexible anchor lines during fall arrest. The model of a 2-component system—a horizontal flexible anchor line and a falling rigid mass, described with a second order non-linear differential equation—is the main element of this method. This method of simulation is realised by a computer program, which allows obtaining the most important data characterising a fall arrest. The article shows laboratory tests used for the verification of this method, which turned out to be a valuable source of information and which can be used for designing fall arrest systems.     

焊接防护具抗热穿透性能测试仪的研制

焊接防护具是指一种保护佩戴者免受由焊接或相关作业所产生的有害光辐射及其他特定有害因素的装置。它是从事焊接与热切割作业人员必备的个体防护装备。抗热穿透性能是表征焊接防护具产品质量和安全性能的最重要技术指标之一。然而,如何快速、便捷、节能、准确地对焊接防护具抗热穿透性能进行检测,是迫切需要解决的技术难题。本文在简要分析国内外眼面部防护标准中抗热穿透性能技术要求和测试方法的基础上,提出了一种测试焊接防护具抗热穿透性能的方法,并成功研制了焊接防护具抗热穿透性能测试仪。