Evaluation of hook handles in a pulling task.

To evaluate the effect of handle design characteristics on subjective ratings and pulling forces, meat-hook handles with various handle shapes, sizes, and hook positions were tested in a pulling task. Finger and phalange force data measured by force sensitive resistors and subjective ratings of discomfort were also evaluated. Generally subjects preferred 37-mm double frustum, 30-mm oval handles followed by 30-mm double frustum handles, 37-mm oval, and 45-mm double frustum handles. In the analyses of total pulling force, 37- and 45-mm double frustum handles showed less required pulling force than the others. The averages of finger force contributions to the total pulling force were 27.2, 28.1, 23.9, and 20.8% in order from index to little fingers. The average of phalange force contributions were 28.8, 33.6, and 37.6% for the distal, middle, and proximal phalanges, respectively. The findings illustrate that the pulling finger forces and subjective discomfort ratings were related to the handle shape as well as handle size.     

Evaluation of pliers’ grip spans in the maximum gripping task and sub-maximum cutting task

A total of 25 males participated to investigate the effects of the grip spans of pliers on the total grip force, individual finger forces and muscle activities in the maximum gripping task and wire-cutting tasks. In the maximum gripping task, results showed that the 50-mm grip span had significantly higher total grip strength than the other grip spans. In the cutting task, the 50-mm grip span also showed significantly higher grip strength than the 65-mm and 80-mm grip spans, whereas the muscle activities showed a higher value at 80-mm grip span. The ratios of cutting force to maximum grip strength were also investigated. Ratios of 30.3%, 31.3% and 41.3% were obtained by grip spans of 50-mm, 65-mm, and 80-mm, respectively. Thus, the 50-mm grip span for pliers might be recommended to provide maximum exertion in gripping tasks, as well as lower maximum-cutting force ratios in the cutting tasks.     

Investigation of methods for estimating hand bone dimensions using X-ray hand anthropometric data

This study examined two conversion methods, M1 and M2, to predict finger/phalange bone lengths based on finger/phalange surface lengths. Forty-one Korean college students (25 males and 16 females) were recruited and their finger/phalange surface lengths, bone lengths and grip strengths were measured using a vernier caliper, an X-ray generator and a double-handle force measurement system, respectively. M1 and M2 were defined as formulas able to estimate finger/phalange bone lengths based on one dimension (i.e., surface hand length) and four finger dimensions (surface finger lengths), respectively. As a result of conversion, the estimation errors by M1 presented mean 1.22?mm, which was smaller than those (1.29?mm) by M2. The bone lengths estimated by M1 (mean r?=?0.81) presented higher correlations with the measured bone lengths than those estimated by M2 (0.79). Thus, the M1 method was recommended in the present study, based on conversion simplicity and accuracy.     

Evaluation of design alternatives for sewing scissors with respect to hand performance,discomfort and usability

The effects of three re-designed models of sewing scissors on hand performance measures, discomfort and usability were investigated, and the results were compared with those of conventional scissors. Adjustments were made to the scissors handle with emphasis on more neutral wrist postures (bent handle - model A), correction of the thumb's position and movements (model B) and reducing hand/finger discomfort (model C) while working with the tool. The results showed some improvements in hand performance, muscular effort, usability and discomfort with model B compared to the conventional model. Better hand performance and usability and lower discomfort were recorded with model C compared to the conventional model. The results suggest that the correction of the thumb's position and movement (model B) or even reduced hand/finger discomfort (model C) are perhaps more important considerations in scissors design than improved wrist posture (model A) for improving users' performance and usability of the tool.     

The influence of age and type of force on muscle strength capabilities in women

The aim of this study was to assess handgrip and 5 other types of force in 52 women and to determine if handgrip force reflected general upper limb force capabilities correlated with age. The women were divided into subgroups according to age: 20-25, 45-50 and 55-65 years. Maximum forces of the right upper limb were measured in 6 types of force activities. In most tests the values of force showed statistically significant differences between the 20-25 group and the groups aged 45-50 and 55-64 years. The results did not show any differences related to age or to force activities that involved the small muscles of the forearms and hands. Thus handgrip force cannot always be considered an indicator of total force capabilities.     

The Relationships Between Biomechanical and Postural Stresses,Musculoskeletal Injury Rates,and Perceived Body Discomfort Experienced by Industrial Workers: A Field Study

A combination of archival, subjective, and observational field data collection methods were used to investigate the relationship between biomechanical and postural stresses, and the resulting physical strain experienced by industrial workers of a packaging plant. Assessment of physical strain was based on the number and incidence rate of Occupational Safety and Health Administration (OSHA)-reportable injuries that were recorded over a period of 27 months, and based on the self-reported ratings of perceived body discomfort. Both the biomechanical and postural stresses correlated with the musculoskeletal injury rate. The results illustrate the usefulness of postural and biomechanical analyses for assessing the risk of injury in industry.     

Optimization of the levels of grip force,stroke rotation,frequency and grip span for a torqueing task

This study was to investigate the effects of grip force, frequency, stroke rotation and grip-span on discomfort and obtain best posture for hand tool users. Fifteen male participants volunteered in this study. Participants performed combined gripping with torqueing exertions for 5 min for two levels of frequency (10 and 20 exertions/min) at two levels of grip force (50 and 70 N), two levels of stroke rotation (30^○ and 60^○) and three levels of grip-span (4.7, 6 and 7.3 cm). Therefore, a 2×2×2×3 full factorial design was used. The analysis of variance (ANOVA) showed that frequency, stroke rotation and grip-span were significant on discomfort score. Minimum discomfort and comfortable posture was found to be 90 N grip force with 10 exertions/min for 60° stroke rotation at 6-cm grip-span. The grip force, frequency and stroke rotation were found significant on EMG activity of forearm muscles using multivariate analysis of variance (MANOVA). The extensor muscles were found more activated than flexor muscles during the given task.     

Ergonomics in Practice: Physical Workload and Heat Stress in Thailand

This study consists of assessments of the thermal environment and physio-logical strain in tasks associated with airport, construction, and metal jobs. The number of male and female participants was 108. Environmental heat stress was evaluated with the WBGT index. Physiological strain was evaluated by the relative cardiovascular load (%CVL) based on the measurements of heart rate. Also the increase of body temperature, weight loss, and perceived discomfort were determinated. At work sites the assessments lasted for 2 to 4 hrs for each participant. The mean physiological strain exceeded the level of 30%CVL. Severe peaks (over 60%CVL) were observed in specific tasks being in agreement with perceived discomfort ratings. The increase of body temperature and weight loss in most cases remained within acceptable limits. For the most strenuous tasks, various ergonomic improvements were developed in consultation with workers and managers.     

Pushing,pulling and manoeuvring an industrial cart: a psychophysiological study

One of the most frequent manual occupational tasks involves the pushing and pulling of a cart. Although several studies have associated health risks with pushing and pulling, the effects are not clear since occupational tasks have social, cognitive and physical components. The present work investigates a real case of a pushing and pulling occupational task from a manufacturing company. The study initially characterizes the case in accordance with Standard No. ISO 11228-2:2007 as low risk. An experiment with 14 individuals during three modalities of pushing and pulling was performed in order to further investigate the task with the application of electrophysiology. At the end, a simple questionnaire was given. The results show electrophysiological differences among the three modalities of pushing and pulling, with a major difference between action with no load and fully loaded with a full range of motions on the cart to handle.     

A field assessment of floor slipperiness in a fish market in Taiwan

A field assessment of floor slipperiness in 10 fish stands in a fish market in Taiwan was conducted using both friction measurements and subjective ratings. The friction measurements were conducted using the Portable Skid Resistance Tester (PSRT). The subjective ratings of floor slipperiness of both the workers and the customers were collected. The friction measurement results showed that the sink areas had both the lowest friction values and subjective ratings. The overall friction measurement results and the subjective ratings were in fair agreement (r = 0.46 and ρ = 0.49). The customers perceived the walkways as somewhere between “very slippery” to “somewhat slippery” and the picking-up areas as “very slippery.” These were different from the perceptions of the workers where they perceived both areas as “somewhat slippery.”     

Force and acceleration corridors from lateral head impact

This study was conducted to provide force and acceleration corridors at different velocities describing the dynamic biomechanics of the lateral region of the human head. Temporo-parietal impact tests were conducted using specimens from ten unembalmed post-mortem human subjects. The specimens were isolated at the occipital condyle level, and pre-test x-ray and computed tomography images were obtained. They were prepared with multiple triaxial accelerometers and subjected to increasing velocities (up to 7.7 m/s) using free-fall techniques by impacting onto a force plate from which forces were recorded. A 40-durometer padding (50-mm thickness) material covering the force plate served as the impacting boundary condition. Computed tomography images obtained following the final impact test were used to identify pathology. Four specimens sustained skull fractures. Peak force, displacement, acceleration, energy, and head injury criterion variables were used to describe the dynamic biomechanics. Force and acceleration responses obtained from this experimental study along with other data will be of value in validating finite element models. The study underscored the need to enhance the sample size to derive probability-based human tolerance to side impacts.     

Pulling force prediction using neural networks

Purpose. In ergonomics and human factors investigations, pulling force (PF) estimation has usually been achieved using various types of biomechanical models, and independent approximation of PF was done with the help of upper extremity joints. Recently, multiple regression methods have gained importance for task-relevant inputs in predicting PF. Artificial neural networks (ANNs) also play a vital role in fitting the data; however, their use in work-related biomechanics and ergonomics is inadequate. Therefore, the current research aimed to accomplish comparative investigation of ANN and regression models by assessing their capacity to predict PF values. Methods. Multipositional PF data were acquired from 200 subjects at three different handle heights and body locations. ANN and regression models were formed using a random sample of three subsets (75% training, 15% selection, 10% validation) for proving the outcomes. Results. The comparison of ANN and regression models shows that the predictions of ANN models had a profoundly explained variance and lower root mean square difference values for the PF data at three handle heights. Conclusions. These outcomes advise that ANNs offer a precise and robust substitute for regression methods, and should be considered a useful method in biomechanics and ergonomics task assessments.     

Ergonomic evaluation of a new truck seat design: a field study

A postural evaluation of commercial licensed truck drivers was conducted to determine the ergonomic benefits of a truck seat prototype in comparison with an industry standard seat. Twenty commercially licensed truck drivers were recruited to perform a 90-min driving task. Postures were assessed using accelerometers and a backrest and seat pan pressure mapping system. Subjective discomfort measurements were monitored using two questionnaires: ratings of perceived discomfort (RPD) and the automotive seating discomfort questionnaire (ASDQ). Participants reported significantly higher discomfort scores when sitting in the industry standard seat. Participants sat with more lumbar lordosis and assumed a more extended thoracic posture when seated in the prototype. Pairing the gluteal backrest panel with the adjustable seat pan also helped reduce the average sitting pressure on both the seat pan and the backrest. The prototype provided several postural benefits for commercially certified truck drivers, as it did for a young and healthy population.     

Thermal Strain in Fire Fighters While Wearing Task-Fitted Versus EN 469:2005 Protective Clothing During a Prolonged Rescue Drill

Fire fighters are normally overprotected during their working hours because of the tendency to keep the personal protection level sufficiently high in case of the worst possible scenarios. This study investigated the effects of task-fitted protective clothing on thermal strain in fire fighters as compared to EN 469:2005 protective clothing during a prolonged (2 1/2 hrs) job-related rescue drill under neutral and hot climates. The subjects were 23 healthy, physically fit professional male fire fighters aged 26–44 years. Measurements included cardiovascular and thermal responses and subjective assessments. Wearing task-fitted clothing during rescue tasks in a neutral climate considerably reduced total thermal and cardiovascular strain in prolonged rescue work. The fire fighters also perceived physical work as significantly harder on average, and reported more intense subjective discomfort while wearing EN 469:2005 as compared to task-fitted clothing.     

Effect of ergonomic design changes in hand tools on physiological cost and subjective ratings

Users of hand tools expect that tools after ergonomic changes in design will require less muscular activity and cause fewer musculoskeletal disorders than conventional tools. Reports on evaluation of ergonomic design changes in hand tools are controversial. In this study, we measured the effect of changes in tool design with physiological cost of performance and subjective ratings in a simulated setting. We determined physiological cost of performance by measuring muscle activity of the right and left forearm (flexor carpi ulnaris) with electromyography. We collected a questionnaire with subjective ratings before and after each experimental task. Before the tests, ergonomically reconfigured hacksaws received better rating scores than original hacksaws. However, we found no differences in subjective ratings of the hacksaws after the tests. In addition, electromyographic activity did not show any significant differences between the original and modified tools.     

Thermal strain in fire fighters while wearing task-fitted versus en 469:2005 protective clothing during a prolonged rescue drill.

Fire fighters are normally overprotected during their working hours because of the tendency to keep the personal protection level sufficiently high in case of the worst possible scenarios. This study investigated the effects of task-fitted protective clothing on thermal strain in fire fighters as compared to EN 469:2005 protective clothing during a prolonged (2 1/2 hrs) job-related rescue drill under neutral and hot climates. The subjects were 23 healthy, physically fit professional male fire fighters aged 26-44 years. Measurements included cardiovascular and thermal responses and subjective assessments. Wearing task-fitted clothing during rescue tasks in a neutral climate considerably reduced total thermal and cardiovascular strain in prolonged rescue work. The fire fighters also perceived physical work as significantly harder on average, and reported more intense subjective discomfort while wearing EN 469:2005 as compared to task-fitted clothing.     

The comparative merits of expert observation,subjective and objective data in determining the effects of in-vehicle information systems on driving performance

In this paper we report the results of a field study conducted for the EU project HASTE, in which the effect of IVIS task difficulty on driving performance was assessed by three concurrent methods. These included objective vehicle-related measures, subjective ratings from drivers and expert observers’ evaluations. Results showed that all three techniques were sensitive to detecting the effect of IVIS task difficulty on driving performance. As well as demonstrating a promising technique for measuring the effect of varying levels of visual spatial IVIS task on driving performance, this study highlights the value of subjective ratings and observer evaluation in assessing the effect of IVIS on driving performance.     

Physiological evaluation of chemical protective suit systems (CPSS) in hot conditions.

This job-related experiment investigated physiological strain in subjects wearing impermeable chemical protective suit systems (CPSSs) weighing about 28 kg. Two types of CPSSs were studied: the self-contained breathing apparatus was carried either inside or outside the suit. Eight healthy and physically fit male firefighter instructors aged 32 to 45 years volunteered for the study. The test drill, performed at a dry, windless ta of 40 degrees C, was divided into 2 consecutive work sessions of 14.5 min (a 20-min rest between) including typical operational work tasks. Considerable thermal and maximal cardiovascular strain and intense subjective discomfort measured in the firefighters emphasize the need to limit working time in hot conditions to only 10-12 min while wearing CPSSs. The present results indicate that the exceptionally heavy physical load and psychological stress during operations in chemical emergencies must be considered in the assessment of the cardiovascular capacity of ageing firefighters using CPSSs.     

The Impact of Mobile Data Terminal Use on Posture and Low-Back Discomfort When Combined With Simulated Prolonged Driving in Police Cruisers

The introduction of mobile computing within a constrained vehicle environment has led to changes in the task demands of occupational groups such as professional drivers and law enforcement officers. The purpose of this study was to examine how mobile data terminal (MDT) use interacts with prolonged driving to induce postural changes or low-back discomfort. Eighteen participants (9 male, 9 female) completed two 120-min simulated driving sessions. Time-varying lumbar spine and pelvis postures, seat pan interface pressures and ratings of perceived discomfort were recorded at 15-min intervals. The introduction of a computer interface decreased pelvic posterior rotation by an average of 15° with respect to upright standing and increased peak average discomfort in the neck (5.9 mm), left shoulder (6.8 mm), midback (10.9 mm), low back (10.6 mm) and pelvis (11.5 mm) compared to driving alone. The incorporation of mobile computing warrants consideration in the design of vehicle work environments.     

障碍物在分岔附近对瓦斯爆炸压力影响的实验研究*

为研究置障条件下不同分岔角度管道中瓦斯爆炸压力变化规律,采用长15 m、截面为160 mm×100 mm的矩形和直径160 mm的半圆形组成的拱形模拟巷道,通过改变分岔角附近障碍物的形状与阻塞比,研究瓦斯爆炸在30~45°与30~60°双分岔管道分岔角附近的压力变化规律。结果表明:瓦斯爆炸在30~45°和30~60°双分岔管道中,分岔角后2支管压力均有所增大,且45°和60°支管中压力变化较30°支管更加明显;障碍物位于30°分岔角后,当阻塞比为0.4时,障碍物形状对2~4测点爆炸压力的影响均表现为矩形最大,拱形次之,圆形最小;管道中矩形障碍物对2,3测点爆炸压力的影响随阻塞比增加而增大,对测点4爆炸压力的影响则随阻塞比的增加而减小;设置矩形障碍物时,30~45°双分岔管道中2,3测点的压力增幅大于30~60°双分岔管道,且压力增幅随阻塞比增加而增大,而测点4的表现则相反,30~60°双分岔管道大于30~45°双分岔管道,且压力增幅随阻塞比增加而减小。