Performance of Firefighters’ Protective Clothing After Heat Exposure

Heat and mechanical protection properties of 6 fabric combinations commonly used in firefighters’ protective clothing were assessed before and after different heat treatment. It was shown that after heat exposure, the values obtained were generally lower than in the original state. The mechanical properties of the materials were more affected by heat than by heat protective properties. In 2 cases, degradation started before a visible change in the material could be observed, which might be potentially dangerous for the end user who will not realize the alteration of the material.     

Summary of recommendations from the National Institute for Occupational Safety and Health Fire Fighter Fatality Investigation and Prevention Program, 2006–2014

Introduction: The NIOSH Fire Fighter Fatality Investigation and Prevention Program (FFFIPP) conducts independent investigations of selected fire fighter line-of-duty deaths (LODD) and offers recommendations to prevent similar deaths. The purpose of the current study was to provide information on more recent FFFIPP recommendations and to determine if recommendations have changed over time. Methods: Fatality investigations completed from 2006 to 2014 were selected for this study with recommendations being assigned into twelve major categories when possible. The most frequently occurring recommendations were then rank ordered overall and then by medical and traumatic fire fighter LODD. Results: There were 1,067 total recommendations made in the published fire fighter investigative reports for both medical and trauma-related fire fighter fatalities for the period 2006–2014. Of these, 784 (73%) could be placed within one of the 12 categories noted previously. The top 10 recommendation categories overall were: 1. Medical screening, 2. Fitness and wellness program, 3. Training, 4. Medical clearance, 5. Standard Operating Procedures/Standard Operating Guidelines (SOPs/SOGs), 6. Incident command, 7. Strategy and tactics, 8. Communications, 9. Personal protective equipment and 10. Staffing. Conclusions: The leading recommendations from the NIOSH FFFIPP medical investigations between 2006 and 2014 did not change compared to those made between 1998 and 2005, with the exception of the addition of “medical clearance for duty”. There were changes for the traumatic injury leading recommendations for 2006–2014, with the major change being “training”, which was the leading FFFIPP recommendation for traumatic injuries for this time period. Practical applications: The intent of the FFFIPP is to influence fire departments and fire fighters to critically assess and evaluate situations/circumstances similar to those identified by NIOSH investigations and implement the recommendations offered to prevent additional fire fighter fatalities.     

What’s in a name? Drivers’ perceptions of the use of five SAE Level 2 driving automation systems

Introduction: Automobile manufacturers are developing increasingly sophisticated driving automation systems. Currently, the highest level of automation available on the market is SAE Level 2, which provides sustained assistance for both lateral and longitudinal vehicle control. The purpose of this study was to evaluate how drivers’ perceptions of what behaviors secondary to driving are safe while a Level 2 system is operating vary by system name. Methods: A nationally representative telephone survey of 2005 drivers was conducted in 2018 with questions about behaviors respondents perceived as safe while a Level 2 driving automation system is in operation. Each respondent was asked about two out of five system names at random for a balanced study design. Results: The name “Autopilot” was associated with the highest likelihood that drivers believed a behavior was safe while in operation, for every behavior measured. There was less variation observed among the other four SAE Level 2 system names when compared with each other. A limited proportion of drivers had experience with advanced driver assistance systems and fewer of these reported driving a vehicle in which Level 2 systems were available. Drivers reported that they would consult a variety of sources for information on how to use a Level 2 system. Conclusions: The names of SAE Level 2 driving automation systems influence drivers’ perceptions of how to use them, and the name “Autopilot” was associated with the strongest effect. While a name alone cannot properly instruct drivers on how to use a system, it is a piece of information and must be considered so that drivers are not misled about the correct usage of these systems. Practical Applications: Manufacturers, suppliers, and organizations regulating or evaluating SAE Level 2 automated driving systems should ensure that systems are named so as not to mislead drivers about their safe use.     

Algorithms for Increasing the Efficiency of Precision Production Operator’s Activities

To assess and plan future risk-analysis research projects, 275 documents describing methods and tools for assessing the risks associated with industrial machines or with other sectors such as the military, and the nuclear and aeronautics industries, etc., were collected. These documents were in the format of published books or papers, standards, technical guides and company procedures collected throughout industry. From the collected documents, 112 documents were selected for analysis; 108 methods applied or potentially applicable for assessing the risks associated with industrial machines were analyzed and classified. This paper presents the main quantitative results of the analysis of the methods and tools.     

Ergonomic Diagnosis of the Driver’s Workplace in an Electric Locomotive

This paper deals with research aimed at developing a method for ergonomic analysis of the driver’s workplace in an electric locomotive. It presents the structure of the diagnosis and its assumptions, and includes a re-evaluation of the questionnaire-expert method in ergonomic research. The article presents research data on weights and evaluations including their standard deviations for particular priority features. Ergonomic levels of the studied operator’s cabin in locomotives are compared.     

Prevalence of Musculoskeletal Disorders at Workplaces in the People’s Republic of China

This paper presents 2 musculoskeletal disorders questionnaire surveys in 10 different Chinese occupational groups. Data collected from 1,603 workers using a modified Nordic musculoskeletal disorders symptom questionnaire showed that the 12-month prevalence of musculoskeletal disorders, particularly in the low back and shoulder-neck regions, was high at many Chinese workplaces. Significant differences existed between occupational groups. Assembly workers usually had higher neck-shoulder complaints compared to workers in most other occupations. However, the nature of assembly seemed also to influence the prevalence rate. Workers at a cassette recorder and a TV set assembly plant appeared to have more neck complaints compared with a group of thermos flask assemblers.     

Development and evaluation of RAMP I – a practitioner’s tool for screening of musculoskeletal disorder risk factors in manual handling

RAMP I is a screening tool developed to support practitioners in screening for work-related musculoskeletal disorder risk factors related to manual handling. RAMP I, which is part of the RAMP tool, is based on research-based studies combined with expert group judgments. More than 80 practitioners participated in the development of RAMP I. The tool consists of dichotomous assessment items grouped into seven categories. Acceptable reliability was found for a majority of the assessment items for 15 practitioners who were given 1?h of training. The usability evaluation points to RAMP I being usable for screening for musculoskeletal disorder risk factors, i.e., usable for assessing risks, being usable as a decision base, having clear results and that the time needed for an assessment is acceptable. It is concluded that RAMP I is a usable tool for practitioners.     

An Empirical Investigation of the Influence of Safety Climate on Organizational Citizenship Behavior in Taiwan’s Facilities

Although the social exchange relationships between employers and employees are increasingly important to the performance of safety management systems, the psychological effects of work attitudes on this relationship have been less studied. Using a sample of first-line operators and their supervisors from 188 facilities in Taiwan which had Occupational Health and Safety Assessment Series 18000 (OHSAS 18000) certification, the current research conducted an empirical investigation of the influence of safety climate on organizational citizenship behavior (OCB). Work attitude was used to disclose the psychological effect. Research results indicated that (a) safety climate was a significant predicator of OCB, (b) the psychological effect significantly influenced social exchange relationships, and (c) job satisfaction showed a stronger mediating influence than organizational commitment due to the frequent top management turnover. Discussions and implications are also addressed.     

Testing of dust clouds for the electrostatic-spark ignition hazard in industry. Need for a modified approach?

Current standard test methods for electric-spark minimum ignition energies (MIEs) of dust clouds in air require that a series inductance of at least 1–2 mH be included in the electric-spark discharge circuit. The reason is to prolong the spark discharge duration and thus minimize the spark energy required for ignition. However, when assessing the minimum electrostatic energy ½CU² for dust cloud ignition by accidental electrostatic-spark discharges, current testing standards require that the series inductance of at least 1–2 mH be removed from the spark discharge circuit. No other changes of apparatus and test procedure are required. The present paper questions whether this simple approach is always adequate. The reason is that in practice in industry accidental electrostatic-spark discharge circuits may contain large ohmic resistances due to corrosion, poor electrical grounding connections, poorly electrically conducting construction materials etc. The result is increased spark discharge durations and reduced mechanical disturbance of the dust cloud by the blast wave emitted by the spark. Therefore, testing for minimum ½CU² for ignition by accidental electrostatic spark discharges may not only require removal of the series inductance of 1–2 mH from the standard MIE spark discharge circuit. Additional tests may be needed with one or more quite large series resistances R_s inserted into the spark discharge circuit. The present paper proposes a modified standard test procedure for measurement of the minimum electrostatic-spark ignition energy of dust clouds that accounts for these effects.     

Detection of spatially clustered outbreaks in motor vehicle crashes: What’s the best method?

Spatio-temporal surveillance methods for detecting outbreaks of disease are fairly common in the literature, with the SCAN statistic setting the benchmark. Spatio-temporal surveillance methods are less commonly described in relation to detection of outbreaks in motor vehicle crashes. The exponential two-pass CUSUM (E2PC) plan designed to detect age-clustered outbreaks is here compared to the SCAN statistic for early detection of spatially clustered outbreaks in crashes. If the shape and size of the outbreaks are known in advance, then the SCAN statistic has advantages over the E2PC plan. However, if outbreaks vary significantly in terms of size but are roughly rectangular in shape then the E2PC plan as outlined in this paper has advantages over the SCAN statistic.     

A Study on the Combined Effect of Noise and Vibration on Operators’ Performance of a Readability Task in a Mobile Driving Environment

This paper presents a study in which the main objective was to investigate the combined effect of noise and vibration on the performance of a readability task in a mobile driving environment. Subjects performed a readability task on a laptop computer in a sitting posture with their backs supported with a backrest under varying levels of noise and vibration. The data in terms of the mean number of characters read per minute were collected and statistically analyzed. Results showed that the individual effect of noise, vibration, and the operators’ gender as well as the interaction between gender and noise, and gender and vibration were statistically significant. However, the combined effect of noise and vibration was not found to be statistically significant. Results also indicated that gender was statistically significant at all levels of noise as well as vibration, and noise and vibration were statistically significant at both levels of gender.     

Children's and Adults’ Comfort Experience of Extra Seat Belts When Riding in the Rear Seat of a Passenger Car

Objective: The objective of this study was to explore passengers’ comfort experience of extra seat belts during on-road driving in the rear seat of a passenger car and to investigate how the use of extra belts affects children's and adults’ attitudes to the product.

Methods: Two different seat belt systems were tested, criss-cross (CC) and backpack (BP), consisting of the standard 3-point belt together with an additional 2-point belt. In total, 32 participants (15 children aged 6–10, 6 youths aged 11–15, and 11 adults aged 20–79, who differed considerably in size, shape, and proportions) traveled for one hour with each system, including city traffic and highway driving. Four video cameras monitored the test subject during the drive. Subjective data regarding emotions and perceived discomfort were collected in questionnaires every 20 min. A semistructured interview was held afterwards.

Results: All participant groups accepted the new products and especially the increased feeling of safety (P <.01); 56% preferred CC and 44% preferred BP but the difference was not significant. In total, 81% wanted to have extra seat belts in their family car. CC was appreciated for its symmetry, comfort, and the perceived feeling of safety. Some participants found CC unpleasant because the belts tended to slip close to the neck, described as a strangling feeling. BP was simpler to use and did not cause annoyance to the neck in the way CC did. Instead, it felt asymmetric and to some extent less safe than CC. Body size and shape affected seat belt fit to a great extent, which in turn affected the experience of comfort, both initially and over time. Perceived safety benefit and experienced comfort were the most determinant factors for the attitude toward the extra seat belts. The extra seat belts were perceived as being better than the participants had expected before the test, and they became more used to them over time.

Conclusion: This exploratory study provided valuable knowledge from a user perspective for further development of new seat belt systems in cars. In addition to an increased feeling of safety, seat belt fit and comfort are supplementary influencing factors when it comes to gaining acceptance of new seat belt systems.     

“Like it’s wrong,but it’s not that wrong:” Exploring the normalization of risk-compensatory strategies among young drivers engaging in illegal smartphone use

Introduction: Young drivers are the most vulnerable road users and most likely to use a smartphone illegally while driving. Although when compared with drink-driving, attitudes to illegal smartphone risk are nearly identical, smartphone use among young drivers continues to increase. Method: Four in-depth focus groups were conducted with 13 young (18–25 years) drivers to gain insight into their perceptions of the risks associated with the behavior. Our aim was to determine how drivers navigate that risk and if their behavior shapes and informs perceptions of norms. Results: Three key themes emerged: (a) participants perceived illegal smartphone use as commonplace, easy, and benign; (b) self-regulatory behaviors that compensate for risk are pervasive among illegal smartphone users; and (c) risk-compensation strategies rationalize risks and perceived norms, reducing the seriousness of transgression when compared with drink-driving. Young drivers rationalized their own use by comparing their selfregulatory smartphone and driving skills with those of “bad drivers,” not law abiders. Practical Applications: These findings suggest that smartphone behaviors shape attitudes to risk, highlighting the importance for any countermeasure aimed at reducing illegal use to acknowledge how a young person’s continued engagement in illegal smartphone use is justified by the dynamic composition of use, risk assessment and the perceived norms.     

Human and organizational factors in Chinese hazardous chemical accidents: a case study of the ‘8.12’ Tianjin Port fire and explosion using the HFACS-HC

Human and organizational factors have been proven to be the prime causes of Chinese hazardous chemical accidents (HCAs). A modified version of the Human Factors Analysis and Classification System (HFACS), namely the HFACS-Hazardous Chemicals (HC), was developed to identify the human factors involved in Chinese HCAs. The ‘8.12’ Tianjin Port fire and explosion, the costliest HCA in recent years, was reanalyzed using this framework, and the results were compared with the official accident inquiry report to determine their differences related to the identification of human and organizational factors. The study revealed that interacting human factors from different levels in Ruihai Company led to this catastrophe, and the inquiry report had limitations in the identification of human factors and the guidance for similar accident prevention. This study showed the applicability of the HFACS-HC in HCA analyses as well as the necessity to recommend this approach for future HCA investigations.     

Mine rescuers’ heat load during the expenditure of physical effort in a hot environment,using ventilated underwear and selected breathing apparatus

Mine rescuers’ heat load under the same physical effort load (25% of the maximal oxygen uptake), using three types of breathing apparatus, in newly developed heat-removing underwear and outerwear was assessed for typical work conditions of mine rescuers, under milder and harsher ambient conditions of 32 and 38?°C, respectively, both at relative humidity of 85% and air velocity of 1.0?m/s. Expending physical effort at the same load while using different kinds of breathing apparatus resulted in a similar heat load. Under both milder and harsher ambient conditions, heat storage and sweating intensity were greater than the average limit value recommended by hygienic standards, which indicates that the use of breathing apparatus significantly hinders heat exchange with the environment. The developed clothing for mine rescuers was highly rated, and was considered by most people to be better than that used currently.