Mobility of Polychlorinated Aromatic Compounds in Soils Contaminated With Wood-preserving Oil

Greater understanding of the mobility of polychlorinated aromatic compounds in soils is needed to investigate contamination and design suitable remediation strategies for sites contaminated with wood-preserving oil. The objectives of this study were (1) to develop a suitable aqueous batch extraction method for soil containing wood-preservative residues; (2) to determine partition coefficients for the primary contaminants [pentachlorophenol (PCP), polychlorinated dibenzo-p-dloxins (PCDDs), and polychlorinated dibenzofurans (PCDFS)] in oil, soil, and aqueous phases; and (3) to evaluate the potential soil migration of the primary contaminants. In a three-phase oil-soil-water mixture, PCP, PCDDs, and PCDFs were partitioned to the greatest extent in the oil phase. These results suggest that the migration of contaminants can occur in a saturated subsurface soil zone containing an oil phase at a wood-preserving site. In the absence of a free oil phase, PCDDs and PCDFs were highly partitioned onto soil and were considered non-leachable in the aqueous phase. However, PCP was considered highly teachable from contaminated soil containing only an aqueous liquid phase. Results from this study Indicate that removal of any free oil phase present in subsurface soil should have highest priority during the cleanup of contaminated wood-preserving sites.     

Mobility of polychlorinated aromatic compounds in soils contaminated with wood-preserving oil

Greater understanding of the mobility of polychlorinated aromatic compounds in soils is needed to investigate contamination and design suitable remediation strategies for sites contaminated with wood-preserving oil. The objectives of this study were (1) to develop a suitable aqueous batch extraction method for soil containing wood-preservative residues; (2) to determine partition coefficients for the primary contaminants [pentachlorophenol (PCP), polychlorinated dibenzo-p-dioxins (PCDDs), and polychlorinated dibenzofurans (PCDFS)] in oil, soil, and aqueous phases; and (3) to evaluate the potential soil migration of the primary contaminants. In a three-phase oil-soil-water mixture, PCP, PCDDs, and PCDFs were partitioned to the greatest extent in the oil phase. These results suggest that the migration of contaminants can occur in a saturated subsurface soil zone containing an oil phase at a wood-preserving site. In the absence of a free oil phase, PCDDs and PCDFs were highly partitioned onto soil and were considered non-leachable in the aqueous phase. However, PCP was considered highly leachable from contaminated soil containing only an aqueous liquid phase. Results from this study indicate that removal of any free oil phase present in subsurface soil should have highest priority during the cleanup of contaminated wood-preserving sites.     

Impact of electrokinetic remediation on microbial communities within PCP contaminated soil

Electrokinetic techniques have been used to stimulate the removal of organic pollutants within soil, by directing contaminant migration to where remediation may be more easily achieved. The effect of this and other physical remediation techniques on the health of soil microbial communities has been poorly studied and indeed, largely ignored. This study reports the impact on soil microbial communities during the application of an electric field within ex situ laboratory soil microcosms contaminated with pentachlorophenol (PCP; 100mg kg(-1) oven dry soil). Electrokinetics reduced counts of culturable bacteria and fungi, soil microbial respiration and carbon substrate utilisation, especially close to the acidic anode where PCP accumulated (36d), perhaps exacerbated by the greater toxicity of PCP at lower soil pH. There is little doubt that a better awareness of the interactions between soil electrokinetic processes and microbial communities is key to improving the efficacy and sustainability of this remediation strategy.     

Decomposer communities in contaminated soil: Is altered community regulation a proper tool in ecological risk assessment of toxicants?

Effects of patchy soil contamination on decomposer organisms, their community regulation and nutrient mineralization were studied in a microcosm experiment. Coniferous forest soil was patchily contaminated with three concentrations of sodiumpentachlorophenate PCP (0, 50 and 500 mg PCP kg(-1) of dry soil). Abundance of microbes, enchytraeids, nematodes, small oribatids and predatory mites were reduced by the PCP. Direct toxicity of PCP and lowered microbial biomass seemed to affect animal community composition in the most contaminated patches. Some large oribatids which seemed to be tolerant to PCP increased their numbers in the most contaminated patches. Although predatory mites suffered from PCP, no altered predator-prey interactions were observed. At the beginning of the experiment more nutrients were released in the patches with highest PCP concentration and the nutrients accumulated in the soil. Soil decomposer food webs seemed to be mainly bottom-up controlled: PCP strongly affects microbes and hence caused changes in the community structure of soil animals and nutrient cycling. Hence top-down orientated ecological models on community regulation and food web dynamics seem to be unsuitable when assessing effects of pesticides on soil communities.     

Porous organoclay composite for the sorption of polycyclic aromatic hydrocarbons and pentachlorophenol from groundwater

Complex mixtures of hazardous chemicals such as polycyclic aromatic hydrocarbons (PAHs) in contaminated soil and groundwater can have severe and long-lasting effects on health. The evidence that these contaminants can cause adverse health effects in animals and humans is rapidly expanding. The frequent and wide-spread occurrence of PAHs in groundwater makes appropriate intervention strategies for their remediation highly desirable. The core objective of this research was to assess the ability of a clay-based composite to sorb and remove toxic contaminants from groundwater at a wood-preserving chemical waste site. Treatment efficiencies were evaluated using either effluent from an oil-water separator (OWS) or a bioreactor (B2). The effluent water from these units was passed through fixed bed columns containing either an organoclay composite or granular activated carbon. The sorbent columns were placed in-line using existing sampling ports at the effluent of the OWS or B2. Individual one-liter samples of treated and untreated effluent were collected in Kimax bottles over the course of 78 h (total of 50 samples). Subsequently each sample was extracted by solid phase extraction methodology, and pentachlorophenol (PCP) and PAH concentrations were quantitated via GC/MS. Columns containing porous organoclay composite, i.e. sand-immobilized cetylpyridinium-exchanged low-pH montmorillonite clay (CP/LPHM), were shown to reduce the contaminant load from the OWS effluent stream by 97%. The concentrations of benzo[a]pyrene (BaP) and PCP were considerably reduced (i.e. >99%). An effluent stream from the bioreactor was also filtered through columns packed with composite or an equivalent amount of GAC. Although the composite reduced the majority of contaminants (including BaP and PCP), it was less effective in diminishing the levels of lower ring versus higher ring PAHs. Conversely, GAC was more effective in removing the lower ring PAHs, except for naphthalene and PCP. The effectiveness of sorption of PCP from the OWS effluent by the composite was confirmed using a PCP-sensitive adult hydra bioassay previously described in our laboratory. The findings of this initial study have delineated differences between CP/LPHM and GAC for groundwater remediation, and suggest that GAC (instead of sand) as the solid support for organoclay may be more effective for the treatment of contaminated groundwater under field conditions than GAC or CP/LPHM alone. Further work is ongoing to confirm this conclusion.     

Chemical Stabilization of Mixed Organic and Metal Compounds: EPA SITE Program Demonstration of the Silicate Technology Corporation Process

In November 1990, the Silicate Technology Corporation's (STC) proprietary process for treating soil contaminated with toxic semivolatile organic and inorganic contaminants was evaluated in a Superfund Innovative Technology Evaluation (SITE) field demonstration at the Selma Pressure Treating (SPT) wood preserving site in Selma, California. The SPT site was contaminated principally with pentachlorophenol (PCP) and arsenic, as well as lesser amounts of chromium and copper. Because of their importance when selecting a remedy for the site, PCP and arsenic were identified as critical analytes to evaluate the effectiveness of treatment.

Evaluation of STC's treatment process was based on contaminant mobility, measured by numerous leaching tests, and structural integrity of the solidified material, measured by physical, engineering, and morphological tests. An economic analysis was also performed, using cost information supplied by STC and supplemented by information generated during the demonstration.

Conclusions drawn from this SITE demonstration evaluation are: (1) the STC process can chemically stabilize contaminated soils similar to those at the Selma site that contain both semivolatile organic and inorganic contaminants; (2) PCP was successfully treated as demonstrated by total waste analysis; (3) heavy metals such as arsenic can be immobilized successfully based on various leach-test criteria; (4) the short-term physical stability of the treated waste was good, with unconfined compressive strengths (UCS) well above landfill solidification standards; (5) treatment resulted in a volume increase of 59 to 75 percent (68 percent average) and a slight increase in bulk density; and (6) the process is expected to cost approximately $190 to $360 per cubic yard when it is used to treat 15,000 cubic yards of waste similar to that found at the STC demonstration site, assuming that on-site, in-place disposal is performed.     

Freezing of a clayey silt contaminated with an organic solvent

In a study of water migration characteristics and organic contaminant transfer mechanisms in a freezing fine-grained saturated soil, a series of one-dimensional freezing tests were conducted on a clayey silt contaminated with a miscible, non-reactive organic compound, 1-propanol, at various concentrations. The experimental results indicate that the frost heave behaviour and solute rejection mechanisms of a soil contaminated with 1-propanol is similar to that of the same soil contaminated with sodium-chloride salt. It was found that 1-propanol is rejected from the pore for rates of cooling smaller than 4 ± 1°C/day. Diffusion appears to control contaminant redistribution in the unfrozen soil. Finally, there has been no contaminant redistribution in the frozen soil for periods up to 245 hours.     

Extended bioremediation of PAH/PCP contaminated soils from the POPILE wood treatment facility

A study was conducted using two pilot-scale land-treatment units (LTUs) to evaluate the efficacy of different cultivation and maintenance schedules during bioremediation of contaminated soil from a wood treatment facility using landfarming technology. The soil contained high concentrations of polycyclic aromatic hydrocarbons (PAHs, approximately 13000 ppm) as well as of pentachlorophenol (PCP, approximately 1500 ppm). An initial 6-month intensive-treatment phase was followed by 24 months of less-intensive treatment. During the first phase, traditional landfarming practice of regular cultivation was compared with a gas-phase composition based cultivation strategy, and both the landfarming units were intensively monitored and maintained with respect to moisture control and delivery of nutrients. The two strategies resulted in similar contaminant concentration profiles with time during this phase, although different microbial populations developed in the two-landfarming units. The second (less-intensive) treatment phase involved no moisture control and nutrient delivery beyond the initial adjustments, and compared natural attenuation (no cultivation) with quarterly cultivation of soil. Both the strategies showed similar behavior again. GC/MS analysis of the soil samples showed PAH removal including four-ring homologues. Leachability tests at zero time and after 6 and 22 months of operation showed significant reductions in leaching of PCP and low molecular weight PAHs. Extended treatment resulted in some leaching of high molecular weight PAHs. Significant biological activity was demonstrated, even at the high contaminant concentrations. Phospholipid ester-linked fatty acid (PLFA) analysis showed an increase in biomass and a divergence in community composition in soils depending on the treatment conducted.     

Multiple batch extraction test to estimate contaminant release parameters using a Bayesian approach

Industrial activities produce vast amounts of weakly contaminated materials which are commonly reused as filling materials on natural ground. There is a strong demand to define guidelines for the application of these materials, to estimate the leaching potential of contaminants from the materials, and to assess the potential hazard for groundwater pollution. We present a multiple batch experiment, where measurements of liquid-phase concentrations at varying liquid/solid ratios are used to estimate the total mass of contaminant that can be extracted from a contaminated material with a mild extractant like water. Furthermore, the experiment yields estimates of the isotherm describing the partitioning of the contaminant between the solid and liquid phases, and a concentration that might be expected under soil hydraulic conditions representative for the field situation. Model parameters are estimated from liquid-phase concentrations within a Bayesian framework by applying the Shuffled Complex Evolution Metropolis Algorithm (SCEM-UA), an efficient Markov Chain Monte Carlo sampler. A sensitivity analysis and inversions of synthetically generated data corrupted with noise show the general suitability of the proposed method. An uncertainty analysis for model parameters and model predictions shows the expected accuracy of the estimates. An application to concentration measurements obtained from a multiple batch extraction test illustrates the applicability of the approach for a real situation.     

Degradation of pentachlorophenol by pure and mixed cultures in two different soils

GOAL, SCOPE AND BACKGROUND: Pentachlorophenol (PCP) is the second highest volume pesticide used in the United States. It is a mutagenic compound whose exposure poses significant health effects, One of the most desirable, environmentally friendly treatment methods is bioremediation. For soil-based contamination, the effectiveness of bioremediation will also be affected by the presence of an active indigenous population, sorption of the contaminant onto the soil, and environmental parameters. METHODS: Two pure strains and their mixed culture were used to evaluate PCP biodegradation in two different field soils, Columbia (CO) and New Mexico (NM). Biostimulation of the indigenous microbes was evaluated by adding nutrients. The efficiency of adding bacteria strains (bioaugmentation) for degrading PCP was determined with Arthrobacter sp., Flavobacterium sp. and a 50:50 mixture of the two bacteria strains. RESULTS: In CO soil, only 24%, 12% and 25% of the initial PCP concentration were degraded by Flavobacterium sp., Arthrobacter sp. and mixed culture, respectively. Arthrobacter sp. was used in NM soil with two initial concentrations and achieved degradation efficiencies of 57% and 61% for 361 and 95 mg kg- concentrations, respectively. Discussion. Analysis via statistical methods showed that the bacteria had different efficiencies on PCP degradation in each soil. 2 CONCLUSIONS: All bacteria catalyzed a higher PCP degradation when present in NM soil. Second, Flavobacterium sp. degraded more PCP than Arthrobacter sp. in CO soil. The mixed culture achieved the highest degradation efficiency regardless of the initial concentration or soil origin. RECOMMENDATIONS AND PERSPECTIVES: The effect of the soil properties, such as the soil organic matter (SOM) on PCP biodegradation should be investigated. Future work can also investigate the effect of aging time on biodegradation.     

EPA SITE Demonstration of the BioTrol Soil Washing Process

A pilot-scale soil washing process, patented by BioTrol, Inc., was demonstrated on soil contaminated by wood treating waste, primarily pentachlorophenol (PCP) and creosote-derived polynuclear aromatic hydrocarbons (PAHs). Although soil washing was the main object of this demonstration, the treatment train that was evaluated included two other BioTrol technologies for treatment of waste streams from the soil washer. The three technologies were: ? The BioTrol Soil Washer (BSW)—a volume reduction process, which uses water to separate contaminated soil fractions from the bulk of the soil.

? The BioTrol Aqueous Treatment System (BATS)—a biological water treatment process.

? The Slurry Bioreactor (SBR)—a BioTrol biological slurry treatment process conducted in an EIMCO BIOLIFT^tm reactor.

The sandy soil at the site, consisting of less than 10 percent of fines, was well suited for treatment by soil washing. The soil washer was evaluated in two tests on soil samples containing 130 ppm and 680 ppm of PCP, respectively.

The BSW successfully separated the feed soil (dry weight basis) into 83 percent of washed soil, 10 percent of woody residues, and 7 percent of fines. The washed soil retained about 10 percent of the feed soil contamination while 90 percent of the feed soil contamination was contained within the woody residues, fines, and process water.

The soil washer achieved up to 89 percent removal of PCP and 88 percent of total PAHs, based on the difference between their levels in the as-is (wet) feed soil and the washed soil. PCP concentrations of 14 ppm and 87ppm in the washed soil were achieved from PCP concentrations of 130 ppm and 680ppm in the feed soil. Concentrations of total PAHs were reduced from 247 ppm to 42 ppm and 404 ppm to 48 ppm, respectively, in the two tests.

The BATS degraded up to 94 percent of PCP in the process water from soil washing. PAH removal could not be determined due to low influent concentrations.

The SBR achieved over 90 percent removals of PCP and 70 to 90 percent removals of PAHs from the slurry of contaminated fines from soil washing. However, steady state operation was not achieved during the single test and the results were variable.

Cost of a commercial-scale soil washing, assuming use of all three technologies, was estimated to be $168 per ton of soil treated. Incineration of woody material accounts for 76 percent of the cost.     

Surface catalyzed Fenton treatment of bis(2-chloroethyl) ether and bis(2-chloroethoxy) methane

This study examined the feasibility of using surface catalyzed Fenton treatment to remediate soil and groundwater contaminated by the chlorinated ethers, bis(2-chloroethyl) ether (BCEE) and bis(2-chloroethoxy) methane (BCEM). Parameters that affect the contaminant loss rate such as porewater pH, hydrogen peroxide concentration, and solid/water ratio were systematically evaluated. Batch reactors were set-up utilizing either contaminated or uncontaminated soil, obtained from an industrial site in Moss Point, MS, that was mixed with synthetic groundwater containing the contaminants of interest. The results show an increase in contaminant reduction with a decrease in pH, an increase in hydrogen peroxide concentration, or an increase in the solid/water ratio. For a similar set of conditions, contaminant reduction was greater for systems utilizing contaminated soil as compared to the systems containing uncontaminated soil. In addition, specific oxygen uptake rates (SOURs) were measured for biomass, collected from an activated sludge plant, exposed to different dilutions of untreated and surface catalyzed Fenton treated water to evaluate whether residual BCEE, BCEM, and their co-contaminants as well as their oxidation by-products were potentially inhibitory or can potentially serve as a substrate for the biomass. The measured SOURs show that the surface catalyzed Fenton treatment enhanced the biodegradability of the contaminated groundwater and served as a substrate for the biomass.     

Biosurfactant technology for remediation of cadmium and lead contaminated soils

This research focuses on column experiments conducted to evaluate the potential of environmentally compatible rhamnolipid biosurfactant produced by Pseudomonas aeruginosa strain BS2 to remove heavy metals (Cd and Pb) from artificially contaminated soil. Results have shown that di-rhamnolipid removes not only the leachable or available fraction of Cd and Pb but also the bound metals as compared to tap water which removed the mobile fraction only. Washing of contaminated soil with tap water revealed that approximately 2.7% of Cd and 9.8% of Pb in contaminated soil was in freely available or weakly bound forms whereas washing with rhamnolipid removed 92% of Cd and 88% of Pb after 36 h of leaching. This indicated that di-rhamnolipid selectively favours mobilization of metals in the order of Cd>Pb. Biosurfactant specificity observed towards specific metal will help in preferential elution of specific contaminant using di-rhamnolipid. It was further observed that pH of the leachates collected from heavy metal contaminated soil column treated with di-rhamnolipid solution was low (6.60-6.78) as compared to that of leachates from heavy metal contaminated soil column treated with tap water (pH 6.90-7.25), which showed high dissolution of metal species from the contaminated soil and effective leaching of metals with treatment with biosurfactant. The microbial population of the contaminated soil was increased after removal of metals by biosurfactant indicating the decrease of toxicity of metals to soil microflora. This study shows that biosurfactant technology can be an effective and nondestructive method for bioremediation of cadmium and lead contaminated soil.     

Phytoremediation of petroleum hydrocarbons in tropical coastal soils II. microbial response to plant roots and contaminant

GOAL, SCOPE AND BACKGROUND: The goal of this study was to understand the interaction between plants and microorganisms during petroleum-hydrocarbon bioremediation in Pacific Islands coastal soils. Total bacteria and hydrocarbon-degrading microorganisms population dyanamics were examined in the rhizospheres of tropical trees and shrubs, which were evaluated for their phytoremediation potential in a greenhouse experiment. The respective and combined effects of plant roots and diesel contaminant on the microbial populations were determined in relation to diesel fuel depletion. An increase in the grading populations size of the hydrocarbon-degrading populations of microbes, elicited by rhizodeposition, is generally regarded as conducive to an enhanced degradation of petroleum hydrocarbon pollutants in vegetated soil. METHODS: The soil was a coastal sandy loam (pH 7.8) which was artificially contaminated with 10 g of No. 2 diesel fuel/kg soil or left uncontaminated. The pots were irrigated with fertilizer and 1% NaCl. The enumerations were carried out in the contaminated and uncontaminated rhizospheres of three trees, kiawe (Prosopis pallida), milo (Thespesia populnea), and kou (Cordia subcordata) and three shrubs, beach naupaka (Scaevola sericea), false sandalwood (Myoporum sandwicense), and oleander (Nerium oleander). Unplanted control soils were included in the experiment. Total bacteria and phenanthrene-degrading bacteria were enumerated on plates. Diesel- and pristane-degrading microorganisms were enumerated by the most-probable-number technique in tissue-culture plates. RESULTS AND DISCUSSION: All four types of microorganisms responded to the rhizosphere of the 6 plants in uncontaminated soil and to the diesel contaminant in unplanted soil. In contaminated rhizospheres, no effect of the plant on the hydrocarbon-degrader numbers was visible. Total bacteria responded more to the plant roots than to the contaminant. The phenanthrene-degrading bacteria and pristane-degrading microorganisms were more influenced by the contaminant than by the plants. The diesel-degrading microorganisms were equally stimulated by the plants and the contaminant. The numbers of hydrocarbon degraders were similar in the contaminated rhizospheres of the three effective plants (kiawe, kou, and milo) and in those of the three ineffective shrubs. CONCLUSION: The results suggest the quality of the rhizodeposition is plant-dependent and governs the type of diesel-degrader populations that will be enhanced by a given plant. RECOMMENDATIONS AND OUTLOOK: In the proposed phytoremediation-benefit model plant roots maintain high levels of hydrocaron degraders in uncontaminated soil. When the root enters a contaminated zone of soil, those hydrocarbon degraders that prefer the contaminant would switch to the contaminant as a carbon source, effectively removing the hydrocarbons. If the root exudates and the contaminant are equally attractive to the hydrocarbon degraders, the contaminant degradaton would be less effective.     

Determination of chemical availability of cadmium and zinc in soils using inert soil moisture samplers

A rapid method for extracting soil solutions using porous plastic soil-moisture samplers was combined with a cation resin equilibration based speciation technique to look at the chemical availability of metals in soil. Industrially polluted, metal sulphate amended and sewage sludge treated soils were used in our study. Cadmium sulphate amended and industrially contaminated soils all had > 65% of the total soil solution Cd present as free Cd2+. However, increasing total soil Cd concentrations by adding CdSO4 resulted in smaller total soil solution Cd. Consequently, the free Cd2+ concentrations in soil solutions extracted from these soils were smaller than in the same soil contaminated by sewage sludge addition. Amendment with ZnSO4 gave much greater concentrations of free Zn2+ in soil solutions compared with the same soil after long-term Zn contamination via sewage sludge additions. Our results demonstrate the difficulty in comparing total soil solution and free metal ion concentrations for soils from different areas with different physiochemical properties and sources of contamination. However, when comparing the same Woburn soil, Cd was much less available as Cd2+ in soil solution from the CdSO4 amended soils compared with soil contaminated by about 36 years of sewage sludge additions. In contrast, much more Zn was available in soil solution as free Zn2+ in the ZnSO4 amended soils compared with the sewage sludge treated soils.     

Catalytic oxidation of pentachlorophenol in contaminated soil suspensions by Fe+3-resin/H2O2

Pentachlorophenol (PCP) is a wood preserving agent that is commonly found in contaminated soils at wood treatment sites. The catalytic properties of Fe+3-resin for the oxidation of PCP in aqueous solution and soil suspension with H2O2 were tested. Batch tests in aqueous solution were performed at various dosages of catalyst and H2O2, and reaction temperatures. The results showed that the oxidation of PCP in aqueous solution depends on the dose of H2O2 and the temperature. Essentially complete oxidation of 100 mgl(-1) PCP was obtained with 0.5% Fe+3-resin catalyst, 0.1 M H2O2 and at a reaction temperature of 80 degrees C. The oxidation of PCP achieved in three different soil suspensions was more than 94% within 30-50 min. Moreover, it was demonstrated that the same Fe+3-resin could be reused for at least six cycles of PCP oxidation in soil solutions without loss in efficiency unless the pH of the reaction falls below 5. It was proposed that the loss in used Fe+3-resin catalyst activity could be related to the leaching of Fe+3 at low pH.     

污染土壤的淋洗法修复研究进展

污染土壤淋洗技术是修复污染土壤的一种新方法 ,是对污染土壤生物修复的一种补充 ,使污染土壤修复的系统化成为可能。淋洗法主要使用淋洗剂清洗土壤 ,使土壤中污染物随淋洗剂流出 ,然后对淋洗剂及土壤进行后续处理 ,从而达到修复污染土壤的目的。因为淋洗剂的种类和淋洗方式的不同 ,土壤淋洗法可分为许多种类。土壤淋洗法主要受土壤条件、污染物类型、淋洗剂的种类和运行方式等因素影响。综合考虑多方面因素 ,就有潜力设计出经济高效的土壤淋洗系统。土壤淋洗法有很多优点 ,尽管也存在一些问题 ,但其技术上的优势也是其他方法难以取代的 ,所以有良好的应用前景。     

Rhizoremediation of pentachlorophenol by Sphingobium chlorophenolicum ATCC 39723

Sphingobium chlorophenolicum is well known as a pentachlorophenol (PCP) degrader. The objective of this study was to evaluate PCP degradation in a loamy sandy soil artificially contaminated with PCP using phytoremediation and bioaugmentation. Measurements of PCP concentrations were carried out using high performance liquid chromatography analyses (HPLC). The toxic effect of PCP on plants was studied through the monitoring of weight plant and root length. The biodegradation of PCP by S. chlorophenolicum in soil was assessed with a bioluminescence assay of Escherichia coli HB101 pUCD607. Bacterial analyses were carried out by plating on Mineral Salt Medium (MSM) for S. chlorophenolicum, MSM for PCP-degrading/tolerant organisms and Trypticase Soy Broth Agar (TSBA) for heterotrophic organisms. The introduction of S. chlorophenolicum into soil with plants showed a faster degradation when compared to the non-inoculated soil. The monitoring of the plant growth showed a protective role of S. chlorophenolicum against the toxicity of PCP. The bioassay confirmed that initial toxicity was lowered while degradation progressed. There was a significant increase of organisms tested in the roots in comparison to those in the soil. This study showed that the presence of S. chlorophenolicum enhanced the PCP degradation in a loamy soil and also it had a protective role to prevent phytotoxic effects of PCP on plant growth. The combined use of bioaugmentation and plants suggests that the rhizosphere of certain plant species may be important for facilitating microbial degradation of pesticides in soil with important implications for using vegetation to stabilize and remediate surface soils.     

Experimental investigation of pneumatic soil vapor extraction

Soil Vapor Extraction (SVE) is a common remediation technique for removing volatile organic compounds from unsaturated contaminated soils. Soil heterogeneities can however cause serious limitations to the applicability of SVE due to air bypassing low permeable areas of the soil, leading to diffusion limitation of the remediation. To enhance removal from areas subject to diffusion limitation a new remediation technique, pneumatic soil vapor extraction, is proposed. In contrast to traditional SVE, in which soil vapor is extracted continuously by a vacuum pump, pneumatic SVE is based on enforcing a sequence of large pressure drops on the system to enhance the recovery from the low-permeable areas. The pneumatic SVE technique was investigated in the laboratory using TCE as a model contaminant. 2D-laboratory tank experiments were performed on homogeneous and heterogeneous sand packs. The heterogeneous packs consisted of a fine sand lens surrounded by a coarser sand matrix. As expected when using traditional SVE, the removal of TCE from the low permeable lens was extremely slow and subject to diffusion limitation. In contrast when pneumatic venting was used removal rates increased by up to 77%. The enhanced removal was hypothesized to be attributed to mixing of the contaminated air inside the lens and generation of net advective transport out of the lens due to air expansion.     

Plant aided bioremediation in the vadose zone: model development and applications

Phytoremediation has the potential to enhance clean up of land contaminated by various pollutants. A mathematical model that includes a two-fluid phase flow model of water flow as well as a two-region soil model of contaminant reactions was developed and applied to various bioremediation scenarios in the unsaturated zone, especially to plant-aided bioremediation. To investigate model behavior and determine the main parameters and mechanisms that affect bioremediation in unplanted and planted soils, numerical simulations of theoretical scenarios were conducted before applying the model to field data. It is observed from the results that parameters affecting the contaminant concentration in the water phase, such as aqueous solubility, the octanol-water partition coefficient, and organic carbon content of the soil controlled the contaminant fate in the vadose zone. Simulation using the developed model also characterized the fate and transport of the contaminants both in planted and unplanted soils satisfactorily for field applications. Although phytoremediation has the potential for remediation of contaminated soils, results from both modeling and field studies suggested that plants may not always enhance the remediation efficiency when the soil already has a high microbial concentration, when the contaminant bioavailability is low, or when the overall reaction is mass transfer-limited. Therefore, other steps to increase contaminant bioavailability are needed in phytoremediation applications; natural purification mechanisms such as aging, volatilization, and natural bioremediation should be considered to maximize the plant effect and minimize the cost.