Fluidized bed PCB incineration in Alaska

Ogden Environmental Services Inc. (OES) is operating a PCB incineration project on the Kenai Peninsula, Alaska. The facility is approximately 150 miles from Anchorage, Alaska, on a U.S. Fish and Wildlife Service refuge and recreation area. Before attaining its current status, the area was an oil field; pipelines and compressor stations are still in the area. Ogden's facilities are located adjacent to an operating compressor station in an area transected by pipelines. The site became contaminated with PCBs as an indirect result of a compressor explosion in 1972. In March 1988 OES contracted to remediate the site using its proprietary transportable Circulating Bed Combustor (CBC), an advanced technology fluidized bed incinerator. The project will thermally treat more than 80,000 tons of PCB-contaminated soil. Treated soil (ash) contains less than 0.1 ppm PCB and is permanently placed on site. Ogden designed, constructed, permitted, conducted trial burns, and made fully operational this major facility on the remote Kenai Peninsula of Alaska. All systems were designed to withstand the rigors of shipping and to be highly reliable in cold weather and remote-site operations.     

Remediation of PCB-contaminated sediments: Volatility and solubility considerations

Through volatilization and long distance atmospheric transport, polychlorinated biphenyls (PCBs) have been redistributed throughout the global environment. Over the last 70 years, these compounds have permeated every known environmental niche including the remote polar regions of the globe. In this article, the solubility and volatility of the PCB congeners are reviewed relative to the remedial technologies that are currently in use or under consideration. The following discussion focuses primarily on the management options for PCB-contaminated, subaqueous solids that require removal, dewatering, drying, and other treatment to degrade the target contaminants and/or containment in engineered facilities including constructed islands, upland secure landfills and subaqueous pits. Environmental mobility resulting from natural and engineered processes is discussed in relation to the potential for contributing to the global loading and redistribution of PCBs. Additionally, select emerging technologies and management options are reviewed relative to their potential to produce secondary environmental impacts resulting from the soluble and/or volatile redistribution of PCBs. Based on a lack of long-term experience and the recognition that contaminants will remain unaltered for decades, technologies involving engineered containment structures should be considered temporary remedial measures until cost-competitive, destructive processing of contaminated sediments is feasible.     

Remediation of PCB‐Contaminated Soil Using Extraction and Destruction: Bench‐Scale Test

Polychlorinated biphenyls (PCBs) are a persistent environmental issue worldwide. This study summarizes the results obtained from a bench‐scale test of remediating PCB‐impacted soil. The research aimed to evaluate the effectiveness of extracting the PCB Aroclor 1260 from soil, transferring it to a liquid matrix, and then treating the PCB‐containing liquid using an Activated Metal Treatment System, a technology developed by NASA based on zero valent magnesium (ZVMg). The soil was from a former electrical plant area impacted by PCBs. The initial concentration of untreated soil contained an average of 4.7 ± 0.15 mg/kg of Aroclor 1260. The results showed that the mass transfer phenomena is possible using ethanol as a liquid matrix, reaching transfer results up to 93 percent. The ZVMg enabled the destruction of the Aroclor 1260, which reached 20 percent without any buildup of undesirable by‐products, such as less chlorinated PCBs.  ©2016 Wiley Periodicals, Inc.     

A Study of the Use of Alfalfa (Medicago sativa L.) for the Phytoremediation of Organic Contaminants in Soil

This article presents the results of a study that was conducted to determine the effectiveness of using alfalfa (Medicago sativa L.) to enhance the phytoremediation of three different types of chemical contaminants. The chemicals studied were trinitrotoluene (TNT), the polycyclic aromatic hydrocarbon (PAH) pyrene, and the polychlorinated biphenyl (PCB) Aroclor 1248. Experiments were conducted using soils that contained high and low organic matter content. The results indicated that recoveries of pyrene and TNT from soil were highly dependent on the soil organic matter content, while the recovery of PCB was not. Significantly low levels of pyrene and TNT were recovered from all treatments in the soil with 6.3 percent organic matter content compared to recovery levels found in soil with 2.6 percent organic matter. The presence of alfalfa plants had a significant effect on the transformation of TNT and PCB in the low organic matter content soil only and had no effect on the fate of pyrene. In the low organic matter soil, only 15 percent and 17 percent of the initial TNT and PCB levels, respectively, were transformed in the unplanted control soils compared to 66 percent and 77 percent in the alfalfa planted pots. In both soil types, pyrene dissipation could not be attributed to the presence of alfalfa plants. Overall, it was concluded that under high soil organic matter conditions, adsorption and covalent binding to the soil organic matter appeared to be the dominant force of pyrene and TNT removal. The effectiveness of using alfalfa to enhance PCB and TNT transformations was more significant in the lower organic matter soil; thus phytoremediation had a greater effect in soils with lower organic matter content. © 2001 John Wiley & Sons, Inc.     

Nanotechnology Approach for Removing Hydrocarbons and Other Contaminants From Utility Vault and Substructure Wastewater

The feasibility of a nanotechnology‐based hydrocarbon and other contaminants removal pressure filtration device has been demonstrated for dewatering industrial utility vaults and substructures for discharge to local storm drains. The use of the filter device facilitated compliance of utility companies with the General National Pollutant Discharge Elimination System (NPDES) Permit for Discharges from Utility Vaults and Substructures to Waters of the United States. The filter device, employing agglomerated oleophilic nanomaterials demonstrated the removal of dissolved priority pollutants, total suspended solids, and hexane extractable materials below U.S. Environmental Protection Agency criteria with an overall efficiency of 97.4 percent. Overall reduction per contaminant averaged 90 percent. ©2016 Wiley Periodicals, Inc.     

Assessing the Phytoremediation Potential of Tall Fescue and Sericea Lespedeza for Organic Contaminants in Soil

The phytoremediation potential of using tall fescue (Festuca arundinacea Schreb.) grass and sericea lespedeza (Lespedeza cuneata [Dum. ‐Cours.]) legume species was assessed using three different groups of organic contaminants in soil. One hundred parts per million (ppm) each of a nitroaromatic compound (TNT), a polycyclic aromatic hydrocarbon (Pyrene), and a polychlorinated biphenyl (Aroclor 1248) were used to contaminate the soils. The experiments were conducted using soils with high and low organic‐matter content. The results indicate that recoveries of Pyrene and TNT were very low in all treatments in soil with high organic‐matter content (6.3 percent) compared with recoveries in soil with low organic‐matter content (2.6 percent). In contrast, recoveries of PCB from soil were not dependent on the soil's organic‐matter content. Planting both the legume and grass species had significant effect on the transformations of TNT and PCB in the soil with low organic‐matter content and did not affect the fate of Pyrene in both soils. The amount of TNT transformed in the four months of plant growth was 63 percent in the tall fescue and 46 percent in the sericea‐planted soils, compared with only a 15 percent unaccounted loss in the unplanted control soils. Furthermore, the grass species, with its massive root system, was significantly better at causing TNT dissipation compared with the legume species, which has less root vegetative mass. The plant biomass, particularly the shoot weight of the tall fescue grass, was significantly increased as a result of TNT treatment. Tall fescue and sericea biomass did not appear to have any significant effect on Pyrene transformation. Planting sericea provided a significantly high level of PCB transformation in soils with either high or low amounts of organic matter. Tall fescue did not appear to have any significant effect on PCB transformation. © 2002 Wiley Periodicals, Inc.     

Legacy PCB building remediation

Polychlorinated biphenyls (PCBs) came onto the scene as an environmental threat quickly after they were discovered in humans and wildlife by Jensen in 1966. By October 1970, it was reported that PCBs were “truly ubiquitous pollutants” as PCBs were found at detectable concentrations in environmental samples throughout the world. Before 1971, the U.S. Environmental Protection Agency (EPA) reported that 26% of PCBs sold were used in open‐end use applications, such as caulks, sealants, plasticizers, surface coatings, ink, adhesive, and carbonless paper. Processing and distribution of PCBs in commerce were largely banned in the U.S. after July 1979 with certain continued uses authorized by the EPA. While PCBs were banned a long time ago, the ban had no immediate tangible effect on the continued use of regulated levels of PCBs in buildings constructed before the bans were implemented. Legacy buildings with PCB‐containing building materials continue to represent potential sources of indoor air, dust, outdoor air, and soil contamination. Where PCBs are present in building materials, they have the potential to pose a risk to building occupants. Proper removal of PCB‐containing materials is a highly effective approach to abating the risk. The removal can range from targeting specific building PCB‐containing materials through demolition of the building. Engineering and administrative controls can also be useful tools when addressing the risks posed by PCB‐containing materials.     

Effects of cosolvency in the fate and transport of PCBs in soil

Under the purview of EPA's Remedial Engineering Management (REM III) Superfund contract, a CERCLA RI/FS was performed at the Pinettes Salvage Yard site located in Washburn, Maine (EPA Region I). The purpose of the RI/FS was to fully characterize the nature, extent, and fate and transport of PCB contamination resulting from an alleged surface spill of transformer dielectric fluid containing Arochlor 1260 (a polychlorinated biphenyl) and various volatile and semivolatile organic constituents. The RI/FS was performed subsequent to both an immediate removal action (IRA) and a deletion remedial investigation (DRI) performed by EPA contractors. Results of both efforts indicated that the site was unsuitable for deletion from the National Priorities List (NPL) because the site soils contained elevated levels of PCBs. This article presents a case history of the extensive field investigations performed to characterize the contaminant source and evaluate the fate and transport of PCBs in site soils. These investigations included on-site mobile laboratory gas chromatograph (GC) analytical techniques for PCBs and targeted volatile and semivolatile organic compounds; confirmatory Contact Laboratory Program (CLP) laboratory analyses of soils, sediments, surface water, and groundwater samples; statistical analyses and correlation of field mobile laboratory GC data with CLP laboratory analytical results; and an evaluation of the potential effects of cosolvency in the fate and transport of PCBs in subsurface soils.     

Soil washing treatability tests for pesticide-contaminated soil

The 1987 Sand Creek Operable Unit 5 record of decision (ROD) identified soil washing as the selected technology to remediate soils contaminated with high levels of organochlorine pesticides, herbicides, and metals. Initial treatability tests conducted to assess the applicability of soil washing technology did not effectively evaluate the removal of the elevated contaminant concentrations that were found. To further evaluate the applicability of soil washing at this industrial site, a second more comprehensive pilot-scale treatability test was conducted. Twenty-three test runs were conducted over a two-week period in late September 1992, using a pilot-scale soil washing device called the volume reduction unit (VRU). The experimental design evaluated the effects of two wash temperatures, two pH levels, three surfactants, four surfactant concentrations, and two liquid-to-soil ratios on the contaminant removal efficiency of the soil washing process. Site soils from layers at three different depths were used in the study. Results from the pilot-scale treatability test indicated that the VRU could achieve contaminant reduction efficiencies of 97 percent for heptachlor and greater than 91 percent for dieldrin in the uppermost contaminated soils (surface to 1-ft. depth). Residual concentrations of heptachlor and dieldrin in the treated soil ranged from 50 ppm to less than 1.6 ppm, and 6.8 ppm to less than 1.6 ppm, respectively. However, the analytical method detection limit of 1.6 ppm was not low enough to provide residual concentration data at the risk-based action levels of 0.55 ppm for heptachlor and 0.15 ppm for dieldrin.     

Case study: Using soil washing/leaching for the removal of heavy metal at the twin cities army ammunition plant

COGNIS TERRAMET® soil leaching and Bescorp soil washing systems have been successfully combined to remediate an ammunition test burn area at the Twin Cities Army Ammunition Plant (TCAAP), New Brighton, Minnesota. This cleanup is the first in the country to successfully combine these two technologies, and it offers a permanent solution to heavy metal remediation. Over 20,000 tons of soil were treated in the project. The cleaned soil remained on-site, and the heavy metal contaminants were removed, recovered, and recycled. Eight heavy metals were removed from the contaminated soil achieving the very stringent cleanup criteria of <175 ppm for residual lead and achieving background concentrations for seven other project metals (antimony, cadmium, chromium, copper, mercury, nickel, and silver). Initial contaminant levels were measured as high as 86,000 ppm lead and 100,000 ppm copper, with average concentrations over 1,600 ppm each. In addition, both live and spent ordnance were removed in the soil treatment plant to meet the cleanup criteria. By combining soil washing and leaching, COGNIS and Bescorp were able to assemble a process which effectively treats all the soil fractions so that all soil material can be returned on-site, no wastewater is generated, and the heavy metals are recovered and recycled. No hazardous waste requiring landfill disposal was generated during the entire remedial operation.     

Treatment of mixed contamination in water using cyclodextrin‐based materials

This study investigated the effectiveness of a cyclodextrin‐based solid material for the removal of mixed dissolved contaminants. The solid material was prepared by condensation of α‐cyclodextrin. The removal efficiency was found to be 70 percent for total heavy metals (cadmium, lead, chromium, iron, nickel, cobalt, and mercury) to 98 percent for polychlorinated biphenyls (PCBs). The optimum pH for heavy metal removal was approximately 5 and for PCBs it was in the range of 5–7. All of these heavy metals were successfully recovered from the spent cyclodextrin‐based material using nitric acid, allowing the material to be reused for further passes. The results also showed that the presence of alkaline and alkaline earth metals did not have a significant effect on the removal efficiency, indicating that the cyclodextrin‐based material could selectively remove the heavy metals of concern without being consumed by alkaline and alkaline‐earth metals. © 2006 Government of Canada.     

Method development and implementation for co-planar polychlorinated biphenyls (PCBs)

The Emission Measurement Center (EMC) in the Environmental Protection Agency's Office of Air Quality Planning and Standards was directed to conduct an emissions test program at a sewage sludge incinerator in support of a Maximum Achievable Control Technology (MACT) standard. One pollutant category of concern at these facilities was polychlorinated biphenyls, or PCBs. An objective of the test program was to measure co-planar PCBs in the incinerator emissions, the sewage sludge introduced to the incinerator, and the scrubber water effluent used in controlling the incinerator emissions. Co-planar PCB congeners are those having four or more chlorine atoms with only a few substitutions in the ortho positions, i.e. positions designated 2, 2', 6, and 6'. Thirteen PCB compounds are sometimes referred to as the "WHO PCBs," because the World Health Organization (WHO) has derived toxic equivalency factors for these congeners. Studies have shown that these dioxin-like compounds can react with the aryl hydrocarbon receptor. This same reaction is believed to initiate adverse health effects for dioxin and furan congeners. In order to conduct the co-planer PCB testing, the EMC had to develop analytical methods that could measure the 13 co-planar PCBs. The purpose of the test program was to develop, evaluate, and implement analytical test methods capable of measuring co-planar PCBs in three matrices: incinerator stack gases, sewage sludge, and scrubber water effluents. The paper summarizes the initial development work that was performed in preparation of analytical test protocols that could measure co-planar PCBs in air, water, and sludge matrices. Following the method development, a MACT emissions test program was conducted at a sewage sludge facility in July 1999 and these data are also summarized in the paper.     

Comparative evaluation of demonstration testing of two PCB detoxification technologies

This paper presents a summary of the comparative analysis of two polychlorinated biphenyl (PCB) detoxification technologies that were evaluated in pilot scale equipment. Two treatment technologies, base catalyzed decomposition (BCD) and gas phase chemical reduction, treated materials removed from the PCB landfill in Warren County, North Carolina. There has been a remarkable amount of public opposition to this landfill. Very stringent performance criteria for soil cleanup of PCBs and dioxins and for air emissions from the treatment equipment were used, along with a number of other factors to evaluate the two technologies. The BCD technology was selected as the best performing one for this project.     

Measurements of PCB Fluxes into the Atmosphere from a Site Receiving Stabilized Dredged Material

A 50 ha known contaminated site in Bayonne, New Jersey, U.S.A. is permitted to receive up to 3 × 10⁶ m³ of sediment dredged from navigation channels in the New York/New Jersey Harbor. Much of the sediment is expected to contain low to moderate concentrations of industrial and agricultural chemicals, including Polychlorinated Biphenyls (PCBs). The dredged material brought to the site is stabilized with cement and then placed as a capping and grading layer. The flux of PCBs from drying stabilized dredged material has been estimated from measurements of PCB air concentrations at two heights above the ground along with micrometeorological observations. A statistically significant gradient in PCB concentrations has been consistently measured in the first 3 m above the ground. Observed PCB fluxes were highest over freshly placed stabilized dredged sediment and decreased as it cured. The highest flux observed in this study was 7214 ng/m²/h, but during subsequent sampling intervals at the same site, the flux estimates decreased by an order of magnitude over a 5-day interval.     

Safety management by use of laser mass spectrometry of polychlorinated biphenyls (PCBs) in the processed gas and work environment of a PCB disposal plant

This study demonstrates the applicability of laser mass spectrometry for safety management of the processed gas and the work environment in a polychlorinated biphenyl (PCB) disposal plant. By utilization of laser ionization/ion trapping storage/time-of-flight mass spectrometry (LI-IT-TOFMS), we analyzed gaseous PCBs from scrap capacitors with on-line detection. It was confirmed that few contaminants were detected in the spectrum. By the effect of laser-induced selective ionization, it was considered that there was little interference with the mass range of PCBs. The accuracy of LI-IT-TOFMS when analyzing environmental gas was almost the same as that for the PCB standard gas. It was possible to perform on-line analysis of the work environment for over 2000 h (120 000 data points). LI-IT-TOFMS was thus shown to be a very useful method for ensuring the safety of the work environment in disposal plants for PCBs.     

Immobilizing a light,nonaqueous phase liquid

A new technique has been developed to immobilize organic chemicals at a Superfund site. In the course of predesign studies in preparing the Remedial Design for the Pioneer Sand Superfund site in Pensacola, Florida, a light, nonaqueous phase liquid (LNAPL) was discovered floating on the groundwater within the on-site landfill. The liquid, with a viscosity similar to SAE 20 motor oil, was made up of heavy organic chemicals and volatile organic chemicals (VOCs), but no pesticides or polychlorinated biphenyls (PCBs). The volatiles present included toluene, ethylbenzene, and xylenes. Regulatory agencies expressed concern over the possibility of LNAPL migration and asked that a method of LNAPL immobilization be devised.     

Managing bioremediation of a creosote‐contaminated superfund site by optimizing moisture and temperature in a biopile

Soil moisture content and temperature in a contaminated soil biopile equipped with immobilized microbe bioreactors (IMBRs) were optimized during ex situ bioremediation at a creosote‐contaminated Superfund site. Efficiency of remediation during warm summer months without soil‐temperature and moisture optimization was compared with that of cold winter months when corrective measures were applied. Significant reduction (35 percent) in total polycyclic aromatic hydrocarbons (PAHs) was observed, compared to 3.97 percent without corrective measures (p < 0.05). Kinetic rates (KRs) for total PAH removal were significantly enhanced from 3.93 to 50.95 mg/kg/day. KRs for removal of high molecular mass four‐to‐six‐ring PAHs were also significantly enhanced from 70.29 mg/kg/day to 97.45 mg/kg/day ( p < 0.05). Bioremediation of two‐ and three‐ring PAHs increased significantly from 15 percent to 40 percent. Benzo[a]pyrene toxicity equivalent mass (BaP_equiv) was significantly reduced by 48 percent with KR of 0.47 mg/kg/day as compared to 22 percent with KR of 0.14 mg/kg/day (p < 0.05). Soil moisture content was enhanced from 15.7 percent to 41.4 percent. © 2007 Wiley Periodicals, Inc.     

Solvent cleaning of pole transformers containing PCB contaminated insulating oil

In 1989, it was discovered that the recycled insulation oil in pole transformers for electric power supply was contaminated with trace amounts of polychlorinated biphenyls (PCBs; maximum 50 mg-PCB/kg-insulation oil). In order to remove the PCBs from transformer components using n-hexane as a solvent, we investigated the relationship between progressive stages of dismantling and cleaning results. The results are summarized as follows: (1) Based on the cleaning test results, we made an estimate of the residual PCB amount on iron and copper components. By dismantling the test pole transformers into the "iron core and coil portion" and cleaning the components, we achieved a residual PCB amount that was below the limit of detection (0.05 mg-PCB/kg-material). To achieve a residual PCB amount below the limit of detection for the transformer paper component, it was necessary to cut the paper into pieces smaller than 5 mm. We were unable to achieve a residual PCB amount below the limit of detection for the wood component. (2) Compared to Japan's stipulated limited concentration standard values for PCBs, the results of the cleaning test show that cleaning iron or copper components with PCBs only on their surface with the solvent n-hexane will satisfy the limited concentration standard values when care is taken to ensure the component surfaces have adequate contact with the cleaning solvent.     

In Situ flushing of contaminated soils from a refinery: Organic compounds and metal removals

This article demonstrates the applicability of in situ flushing for the remediation of soil contaminated with petroleum hydrocarbons at a Mexican refinery. The initial average total petroleum hydrocarbon (TPH) concentration for the demonstration field test was 55,156 g/kg. After six weeks of in situ flushing with alternate periods of water and water/surfactant, an average concentration of 1,407 mg/kg was reached, achieving a total removal efficiency of 98 percent. At the end of the process, no hydrocarbons such as diesel; gasoline; benzene, toluene, ethyl benzene, and xylene (BTEX); or petroleum aromatic hydrocarbons (PAHs) were found. Iron washing achieved a removal efficiency of 70 percent, and for vanadium, the removal efficiency was 94.4 percent. The volume of soil treated was 41.6 m³ (38 m²), equivalent to 69.5 tons of soil. A rough calculation of the process costs estimated a total cost of $104.20/m³ ($114.00/m²). Our research indicates that there are a few studies demonstrating in situ flushing experiences under field conditions where both organic (TPH, diesel, gasoline, PAHs, BTEX) and metal (iron and vanadium) removals are reported. © 2004 Wiley Periodicals, Inc.