Adsorption and desorption variability of four herbicides used in paddy rice production

This investigation was performed to determine the effect of physicochemical soil properties on penoxsulam, molinate, bentazon, and MCPA adsorption–desorption processes. Four soils from Melozal (35° 43′ S; 71° 41′ W), Parral (36° 08′ S; 71° 52′ W), San Carlos (36° 24′ S; 71° 57′ W), and Panimavida (35° 44′ S; 71° 24′ W) were utilized. Herbicide adsorption reached equilibrium after 4 h in all soils. The Freundlich L-type isotherm described the adsorption process, which showed a high affinity between herbicides and sorption sites mainly because of hydrophobic and H-bonds interaction. Penoxsulam showed the highest adsorption coefficients (4.23 ± 0.72 to 10.69 ± 1.58 mL g^?1) and were related to soil pH. Molinate showed K_d values between 1.72 ± 0.01 and 2.3 ± 0.01 mL g^?1and were related to soil pH and organic matter, specifically to the amount of humic substances. Bentazon had a high relationship with pH and humic substances and its K_d values were the lowest, ranging from 0.11 ± 0.01 to 0.42 ± 0.01 mL g^?1. MCPA K_d ranged from 0.14 ± 0.02 to 2.72 ± 0.01 mL g^?1, however its adsorption was related to humic acids and clay content. According to these results, the soil factors that could explain the sorption process of the studied herbicides under paddy rice soil conditions, were principally humic substances and soil pH. Considering the sorption variability observed in this study and the potential risk for groundwater contamination, it is necessary to develop weed rice management strategies that limit use of herbicides that exhibit low soil adsorption in areas with predisposing conditions to soil leaching.     

Adsorption and desorption processes of MCPA in Polish mineral soils

Studies on the adsorption and desorption of MCPA (4-chloro-2-methylophenoxyacetic acid) were performed in soil horizons of three representative Polish agricultural soils. The Hyperdystric Arenosol, the Haplic Luvisol and the Hypereutric Cambisol were investigated in laboratory batch experiments. Initially, both the adsorption and desorption proceeded rapidly, and either the equilibrium was reached after approximately 30 min or the process slowed down and continued at a slow rate. In the latter case, the equilibrium was reached after 8 hours. Data on the adsorption/desorption kinetics fitted well to the two-site kinetic model. The measured sorption and desorption isotherms were of L-type. The sorption distribution coefficients (K(ads) (d)) were in the range of 0.75--0.97 for Ap soil horizons and significantly lower in deeper soil layers. The corresponding desorption coefficients (K(des) (d)) were higher and ranged from 1.02 to 2.01. Both the adsorption and desorption of MCPA in all soil horizons was strongly and negatively related to soil pH. It appears that hydrophobic sorption plays a dominant role in the MCPA retention in topsoils whereas hydrophilic sorption of MCPA anions is the dominant adsorption mechanism in subsoils.     

Sorption-desorption behavior of metsulfuron-methyl and sulfosulfuron in soils

Sorption of metsulfuron-methyl and sulfosulfuron were studied in five Indian soils using batch sorption method. Freundlich adsorption equation described the sorption of herbicides with K(f) (adsorption coefficient) values ranging between 0.21 and 1.88 (metsulfuron-methyl) and 0.37 and 1.17 (sulfosulfuron). Adsorption isotherms were L-type suggesting that the herbicides sorption decreased with increase in the initial concentration of the herbicide in the solution. The K(f) for metsulfuron-methyl showed good positive correlation with silt content (significant at p = 0.01) and strong negative correlation with the soil pH (significant at p = 0.05) while sorption of sulfosulfuron did not correlate with any of the soil parameter. Desorption of herbicides was concentration dependent and, in general, sulfosulfuron showed higher desorption than the metsulfuron-methyl. The study indicates that these herbicides are poorly sorbed in the Indian soil types and there may be a possibility of their leaching to lower soil profiles.     

Sorption, desorption, and degradation of (4-chloro-2-methylphenoxy)acetic acid in representative soils of the Danubian Lowland, Slovakia

Herbicide leaching through soil into groundwater greatly depends upon sorption-desorption and degradation phenomena. Batch adsorption, desorption and degradation experiments were performed with acidic herbicide MCPA and three soil types collected from their respective soil horizons. MCPA was found to be weakly sorbed by the soils with Freundlich coefficient values ranging from 0.37 to 1.03 mg^1−1/n kg⁻¹ L^1/n. It was shown that MCPA sorption positively correlated with soil organic carbon content, humic and fulvic acid carbon contents, and negatively with soil pH. The importance of soil organic matter in MCPA sorption by soils was also confirmed by performing sorption experiments after soil organic matter removal. MCPA sorption in these treated soils decreased by 37-100% compared to the original soils. A relatively large part of the sorbed MCPA was released from soils into aqueous solution after four successive desorption steps, although some hysteresis occurred during desorption of MCPA from all soils. Both sorption and desorption were depth-dependent, the A soil horizons exhibited higher retention capacity of the herbicide than B or C soil horizons. Generally, MCPA sorption decreased in the presence of phosphate and low molecular weight organic acids. Degradation of MCPA was faster in the A soil horizons than the corresponding B or C soil horizons with half-life values ranging from 4.9 to 9.6 d in topsoils and from 11.6 to 23.4 d in subsoils.     

Determination of solid-liquid partition coefficients (Kd) for the herbicides isoproturon and trifluralin in five UK agricultural soils

Isoproturon and trifluralin are herbicides of contrasting chemical characters and modes of action. Standard batch sorption procedures were carried out to investigate the individual sorption behaviour of 14C-isoproturon and 14C-trifluralin in five agricultural soils (1.8-4.2% OC), and the soil solid-liquid partition coefficients (Kd values) were determined. Trifluralin exhibited strong partitioning to the soil solid phase (Kd range 106-294) and low desorption potential, thus should not pose a threat to sensitive waters via leaching, although particle erosion and preferential flow pathways may facilitate transport. For isoproturon, soil adsorption was low (Kd range 1.96-5.75) and desorption was high, suggesting a high leaching potential, consistent with isoproturon being the most frequently found pesticide in UK surface waters. Soil partitioning was directly related to soil organic carbon (OC) content. Accumulation isotherms were modelled using a dual-phase adsorption model to estimate adsorption and desorption rate coefficients. Associations between herbicides and soil humic substances were also shown using gel filtration chromatography.     

Sorption-desorption behavior of metsulfuron-methyl and sulfosulfuron in soils

Sorption of metsulfuron-methyl and sulfosulfuron were studied in five Indian soils using batch sorption method. Freundlich adsorption equation described the sorption of herbicides with K_f (adsorption coefficient) values ranging between 0.21 and 1.88 (metsulfuron-methyl) and 0.37 and 1.17 (sulfosulfuron). Adsorption isotherms were L-type suggesting that the herbicides sorption decreased with increase in the initial concentration of the herbicide in the solution. The K_f for metsulfuron-methyl showed good positive correlation with silt content (significant at p = 0.01) and strong negative correlation with the soil pH (significant at p = 0.05) while sorption of sulfosulfuron did not correlate with any of the soil parameter. Desorption of herbicides was concentration dependent and, in general, sulfosulfuron showed higher desorption than the metsulfuron-methyl. The study indicates that these herbicides are poorly sorbed in the Indian soil types and there may be a possibility of their leaching to lower soil profiles.     

Sorption and desorption of glyphosate,MCPA and tetracycline and their mixtures in soil as influenced by phosphate

Phosphate fertilizers and herbicides such as glyphosate and MCPA are commonly applied to agricultural land, and antibiotics such as tetracycline have been detected in soils following the application of livestock manures and biosolids to agricultural land. Utilizing a range of batch equilibrium experiments, this research examined the competitive sorption interactions of these chemicals in soil. Soil samples (0-15 cm) collected from long-term experimental plots contained Olsen P concentrations in the typical (13 to 20 mg kg^?1) and elevated (81 to 99 mg kg^?1) range of build-up phosphate in agricultural soils. The elevated Olsen P concentrations in field soils significantly reduced glyphosate sorption up to 50%, but had no significant impact on MCPA and tetracycline sorption. Fresh phosphate additions in the laboratory, introduced to soil prior to, or at the same time with the other chemical applications, had a greater impact on reducing glyphosate sorption (up to 45%) than on reducing tetracycline (up to 13%) and MCPA (up to 8%) sorption. The impact of fresh phosphate additions on the desorption of these three chemicals was also statistically significant, but numerically very small namely < 1% for glyphosate and tetracycline and 3% for MCPA. The presence of MCPA significantly reduced sorption and increased desorption of glyphosate, but only when MCPA was present at concentrations much greater than environmentally relevant and there was no phosphate added to the MCPA solution. Tetracycline addition had no significant effect on glyphosate sorption and desorption in soil. For the four chemicals studied, we conclude that when mixtures of phosphate, herbicides and antibiotics are present in soil, the greatest influence of their competitive interactions is phosphate decreasing glyphosate sorption and the presence of phosphate in solution lessens the potential impact of MCPA on glyphosate sorption. The presence of chemical mixtures in soil solution has an overall greater impact on the sorption than desorption of individual organic chemicals in soil.     

Influence of dissolved humic substances on the leaching of MCPA in a soil column experiment

The influence of dissolved humic substances on the transport of (4-chloro-2-methylphenoxy) acetic acid (MCPA) in a sandy soil with a low organic carbon content was studied in a column experiment. Soil columns were eluted with aqueous solutions containing different fractions of humic substances. More than 70% of the applied compound was found in the leachate in all sandy soil experiments, but distinct differences were obtained depending on the composition of the eluent. The addition of both humic and fulvic acids to the eluent affected the leaching behaviour of MCPA. While the presence of humic acids increased and accelerated the movement of MCPA in the investigated sandy soil, fulvic acids caused the opposite effect: increased retention was observed relative to the control. We concluded that a possible carrier transport or retention strongly depends on the composition of the dissolved organic matter. Thus, changes in the composition of dissolved organic matter may affect MCPA movement into deeper soil layers.     

Variation of MCPA, metribuzine, methyltriazine-amine and glyphosate degradation, sorption, mineralization and leaching in different soil horizons

Pesticide mineralization and sorption were determined in 75 soil samples from 15 individually drilled holes through the vadose zone along a 28 km long transect of the Danish outwash plain. Mineralization of the phenoxyacetic acid herbicide MCPA was high both in topsoils and in most subsoils, while metribuzine and methyltriazine-amine was always low. Organic matter and soil pH was shown to be responsible for sorption of MCPA and metribuzine in the topsoils. The sorption of methyltriazine-amine in topsoil was positively correlated with clay and negatively correlated with the pH of the soil. Sorption of glyphosate was tested also high in the subsoils. One-dimensional MACRO modeling of the concentration of MCPA, metribuzine and methyltriazine-amine at 2 m depth calculated that the average concentration of MCPA and methyltriazine-amine in the groundwater was below the administrative limit of 0.1 μg/l in all tested profiles while metribuzine always exceeded the 0.1 μg/l threshold value.     

Reduced adsorption of ametryn in clay, humic acid, and soil by interaction with ferric ion under Fenton treatment conditions

Previous work in our laboratory indicated a weak interaction between ferric ion and several triazine/triazinone herbicides during a Fenton treatment process, and the intensity of the interaction was calculated. To further support the existence of this weak interaction, the adsorption of ametryn, a triazine herbicide, was investigated in kaolinite clay, humic acid, and soil under pseudo-Fenton conditions. At a low addition rate of ferric ion, the adsorption of ametryn in clay, humic acid, and soil was enhanced due to the decreased pH resulting from the hydrolysis of ferric ion. But the pH effect was totally neutralized and the adsorption of ametryn was significantly reduced by further addition of ferric ion, demonstrating the existence of the weak interaction between ametryn and ferric acid. Further study showed that the adsorption-reduction effect of ferric ion existed not only with ametryn but also with several other triazine/triazinone herbicides. This weak interaction may accelerate the desorption process during the remediation of triazine/triazinone herbicide-contaminated soil using a Fenton/Fenton-like treatment, but it may also impede the degradation of these herbicides.     

The influence of copper on tebuconazole sorption onto soils, humic substances, and ferrihydrite

The aim of this study is to investigate how the presence of Cu influences tebuconazole (Teb) sorption onto contrasting soil types and two important constituents of the soil sorption complex: hydrated Fe oxide and humic substances. Tebuconazole was used in commercial form and as an analytical-grade chemical at different Teb/Cu molar ratios (1:4, 1:1, 4:1, and Teb alone). Increased Cu concentrations had a positive effect on tebuconazole sorption onto most soils and humic substances, probably as a result of Cu?Teb tertiary complexes on the soil surfaces. Tebuconazole sorption increased in the following order of different Teb/Cu ratios 1:4?>?1:1?>?4:1?>?without Cu addition, with the only exception for the Leptosol and ferrihydrite. The highest K _f value was observed for humic substances followed by ferrihydrite, the Cambisol, the Arenosol, and the Leptosol. The sorption of analytical-grade tebuconazole onto all matrices was lower, but the addition of Cu supported again tebuconazole sorption. The Teb/Cu ratio with the highest Cu addition (1:4) exhibited the highest K _f values in all matrices with the exception of ferrihydrite. The differences in tebuconazole sorption can be attributed to the additives present in the commercial product. This work proved the importance of soil characteristics and composition of the commercially available pesticides together with the presence of Cu on the behavior of tebuconazole in soils.     

Detection of PCBs in natural waters by front face fluorometry on solid sorbent on account of their fluorescence quantum yields and interaction with humic substances

A method for the detection of PCBs in natural water, based on extraction/concentration with tab shaped elements cut from C18 fiber glass SPE disks coupled with a fluorescence detection has been evaluated. The potential of the method was estimated through the measurement of the fluorescence quantum yields in acetonitrile and limits of detection (LOD) of 11 PCBs congeners and Arochlors 1221 and 1242 in pure water. Most of the LOD values are within the range of PCB concentrations found in highly polluted waters (<1microg l(-1)) and thus confer some interest to the method. However, as expected, naturally present humic substances was shown to compete with the solid phase for PCBs adsorption thus reducing the capability of the method when applied to natural waters. A Stern-Volmer plot of the fluorescence signal reduction in the presence of various type of humic substances leads to apparent sorption coefficients (K(DOC)) significantly higher than the literature values determined for PCBs or for polycyclic aromatic hydrocarbons, indicating that besides complexing PCBs, humic substances may also block some of the adsorption sites at the sorbent surface. An increase of the pH up to 11 was shown to reduce the negative effect of humic substances but their preliminary total denaturation or destruction appears as a prerequisite condition for taking full advantage of the present method.     

Reduced Adsorption of Ametryn in Clay,Humic Acid,and Soil by Interaction with Ferric Ion Under Fenton Treatment Conditions

Previous work in our laboratory indicated a weak interaction between ferric ion and several triazine/triazinone herbicides during a Fenton treatment process, and the intensity of the interaction was calculated. To further support the existence of this weak interaction, the adsorption of ametryn, a triazine herbicide, was investigated in kaolinite clay, humic acid, and soil under pseudo-Fenton conditions. At a low addition rate of ferric ion, the adsorption of ametryn in clay, humic acid, and soil was enhanced due to the decreased pH resulting from the hydrolysis of ferric ion. But the pH effect was totally neutralized and the adsorption of ametryn was significantly reduced by further addition of ferric ion, demonstrating the existence of the weak interaction between ametryn and ferric acid. Further study showed that the adsorption-reduction effect of ferric ion existed not only with ametryn but also with several other triazine/triazinone herbicides. This weak interaction may accelerate the desorption process during the remediation of triazine/triazinone herbicide-contaminated soil using a Fenton/Fenton-like treatment, but it may also impede the degradation of these herbicides.     

Effect of physical forms of soil organic matter on phenanthrene sorption

The sorption coefficient, K(OC), of phenanthrene (PHE) has been reported to vary with different types of organic matter, leading to uncertainties in predicting the environmental behavior of PHE. Among the studies that relate organic matter properties to their sorption characteristics, physical conformation of organic matter is often neglected. In this work, organic matter samples of different physical forms were examined for their sorption characteristics. Dissolved humic acids (DHA) showed significantly higher K(OC) than the corresponding solid humic acids (SHA) from which the DHAs were made. The K(OC) of DHAs was found to be related to polarity, whereas K(OC) of SHAs increased with aliphatic carbon content. Soil particles were treated with H(2)O(2) to remove organic matter, and humic acid was coated on H(2)O(2)-treated soil particles to make organo-mineral complexes at pH 4, 7 and 10. Although the nonlinear sorption was apparent for SHAs and H(2)O(2)-treated soil particles, the organo-mineral complexes formed using these two components at pH 4, 7 and 10 exhibited relatively linear sorption at organic carbon content, f(OC)>0.5%. These results indicate that organic matter of the same composition may have different sorption properties due to different physical forms (or conformations). Nonlinear sorption for the complexes formed at pH 4 with lower f(OC) (<0.5%) was also discussed.     

Biosorption of strontium from aqueous solution by fungus Aspergillus terreus

INTRODUCTION: The biosorption characteristics of strontium ions using fungus Aspergillus terreus were investigated. Experimental parameters affecting the biosorption process such as pH, contact time, initial metal concentration, and temperature were studied. MATHEMATICAL DESCRIPTION: Fungus A. terreus exhibited the highest strontium uptake capacity at 15°C at an initial strontium ion concentration of 876 mg L(-1) and an initial pH of 9. Biosorption capacity increased from 219 to 308 mg g(-1) with a decrease in temperature from 45°C to 15°C at this initial strontium concentration. The equilibrium data fitted very well to the Langmuir adsorption model in the concentration range of strontium ions and at all the temperatures studied. CONCLUSION: Evaluation of the experimental data in terms of biosorption dynamics showed that the biosorption of strontium onto fungus followed the pseudo-second-order dynamics well (R(2)?>?0.985). The calculated thermodynamics parameters (-1.64?相似文献   

Investigation of solution chemistry effects on sorption behavior of Cu(II) on ZSM-5 zeolite

The sorption of Cu(II) from an aqueous solution using ZSM-5 zeolite was investigated by batch technique under ambient conditions. Sorption was investigated as a function of pH, ionic strength, foreign ions, humic substances, and temperature. The results indicate that the sorption of Cu(II) on ZSM-5 zeolite is strongly dependent on pH. Sorption is dependent on ionic strength at low pH, but independent of ionic strength at high pH values. The presence of humic/fluvic acid (HA/FA) enhances the sorption of Cu(II) on ZSM-5 zeolite at low pH values, and reduces Cu(II) sorption at high pH values. Sorption isotherms were well simulated by the Langmuir model. Thermodynamic parameters (i.e., deltaH0, deltaS0 and deltaG0) for the sorption of Cu(II) were determined from temperature-dependent sorption isotherms at 293.15, 313.15, and 333.15 K, respectively. Results indicate that the sorption process of Cu(II) on ZSM-5 zeolite is spontaneous and endothermic.     

Sorption of U(VI) onto an artificial humic substance-kaolinite-associate

An artificial humic substance-kaolinite-associate (HSKA) was synthesized as a model substance for natural clays containing organic matter in clay formations, soils, and sediments. The U(VI) sorption onto this model substance was studied in batch experiments as a function of pH and compared to the U(VI) sorption onto kaolinite in absence and presence of separately added humic acid (HA). The HSKA has a TOC content of 4.9 mg g(-1). It was found that the humic matter associated with kaolinite exhibits an immobilizing as well as an mobilizing effect on U(VI). Between pH 3 and 5, humic matter causes an increase of the U(VI) sorption onto kaolinite, whereas at pH above 5 the release of humic matter from the associate into the solution and the formation of dissolved uranyl humate complexes reduces the U(VI) sorption. The U(VI) sorption onto the synthetic HSKA differs from that of U(VI) in the system U(VI)/HA/kaolinite with comparable amounts of separately added HA. Separately added HA causes a stronger mobilizing effect on U(VI) than humic matter present in HSKA. This can be attributed to structural and functional dissimilarities of the humic substances.     

Sorption of tebuconazole onto selected soil minerals and humic acids

The aim of the present study was to investigate tebuconazole sorption on common soil minerals (birnessite, ferrihydrite, goethite, calcite and illite) and humic acids (representing soil organic matter). Tebuconazole was used (i) in the commercial form Horizon 250 EW and (ii) as an analytical grade pure chemical. In the experiment with the commercially available tebuconazole, a significant pH-dependent sorption onto the oxides was observed (decreasing sorption with increasing pH). The highest sorption was found for ferrihydrite due to its high specific surface area, followed by humic acids, birnessite, goethite and illite. No detectable sorption was found for calcite. The sorption of analytical grade tebuconazole on all selected minerals was significantly lower compared to the commercial product. The sorption was the highest for humic acids, followed by ferrihydrite and illite and almost negligible for goethite and birnessite without any pH dependence. Again, no sorption was observed for calcite. The differences in sorption of the commercially available and analytical grade tebuconazole can be attributed to the additives (e.g., solvents) present in the commercial product. This work proved the importance of soil mineralogy and composition of the commercially available pesticides on the behavior of tebuconazole in soils.