Transformation of sulfaquinoxaline by chlorine and UV light in water: kinetics and by-product identification

Sulfaquinoxaline (SQX) is an antimicrobial of the sulfonamide class, frequently detected at low levels in drinking and surface water as organic micropollutant. The main goal of the present study is the evaluation of SQX reactivity during chlorination and UV irradiations which are two processes mainly used in water treatment plants. The SQX transformation by chlorination and UV lights (254 nm) was investigated in purified water at common conditions used for water disinfection (pH =?7.2, temperature =?25 °C, [chlorine] =?3 mg L^?1). The result shows a slow degradation of SQX during photolysis compared with chlorination process. Kinetic studies that fitted a fluence-based first-order kinetic model were used to determine the kinetic constants of SQX degradation; they were equal to 0.7?×?10^?4 and 0.7?×?10^?2 s^?1corresponding to the half time lives of 162 and 1.64 min during photolysis and chlorination, respectively. In the second step, seven by-products were generated during a chlorination and photo-transformation of SQX and identified using liquid chromatography with electrospray ionization and tandem mass spectrometry (MS-MS). SO₂ extrusion and direct decomposition were the common degradation pathway during photolysis and chlorination. Hydroxylation and isomerization were observed during photodegradation only while electrophilic substitution was observed during chlorination process.     

Dissipation and metabolism of C-spiroxamine in soil under laboratory condition

Spiroxamine [SPX] belongs to a spiroketalamine group of substances. The biodegradation of [1,3-dioxolane-4-¹⁴C]-SPX has been examined in 2 soils of different physicochemical properties. The total recovery of radioactivity from soils was 98.6-103.5% of that applied. The total amount of extractable radioactivity declined with a simultaneous increase in non-extractable radioactivity. Volatile organics were detected at lower levels; however, mineralization played a marked effect on the route of SPX dissipation. The half-life ranges between 37 and 44 d. SPX does not undergo any enantioselective degradation. 4 metabolites: despropyl-SPX, desethyl-SPX, SPX N-oxide and SPX acid were identified, applying mass spectrometric technique. Sorption-desorption data fitted well with a Freundlich model in log form (r², 0.99). K_Dsorp ranged between 44 and 230, suggesting SPX ought to be considered as a substance with low leaching potential [groundwater ubiquity score (GUS), <1.8]. Furthermore, an overall low desorption of 1-11% indicates firm retention of SPX by the soils.     

Influence of hydroxypropyl-β-cyclodextrin on the biodegradation of C-phenanthrene and C-hexadecane in soil

Soil was spiked with [9-¹⁴C]phenanthrene and [1-¹⁴C]hexadecane at 50 mg kg⁻¹ and aged for 1, 25, 50, 100 and 250 d. At each time point, the microcosms were amended with aqueous solutions of cyclodextrin (HP-β-CD) at a range of concentrations (0-40 mM). Mineralisation assays and aqueous HP-β-CD extractions were performed to assess the effect of the amendments on microbial degradation. The results showed that amendments had no significant impact on the microbial degradation of either of the ¹⁴C-contaminants. Further, HP-β-CD extractions were correlated with the mineralisation of the target chemicals in each of the soil conditions. It was found that the HP-β-CD extraction was able to predict mineralisation in soils which had not been amended with cyclodextrin; however, in the soils containing the HP-β-CD, there was no predictive relationship. Under the conditions of this study, the introduction of HP-β-CD into soils did not enhance the biodegradation of the organic contaminants.     

Synthesis of [14C]biphenyl and of some chlorinated [14C]biphenyls containing 4-chloro-, 2,4-dichloro- and 2,3,6-trichlorophenyl nuclei from the corresponding labelled anilines

The preparation of ¹⁴C-labelled biphenyl, 2,5-dichlorobiphenyl, 2,4′,5-trichlorobiphenyl, 2,2′,4,5′-tetrachlorobiphenyl, 2′,3,4,4′,5-pentachlorobiphenyl, 2,2′,3,4,4′-pentachlorobiphenyl, 2,3,3′,4′,6-pentachlorobiphenyl and 2,2′,3,3′,6-pentachlorobiphenyl is described [¹⁴C]Aniline hydrogen sulfate used as a starting material was acetylated, chlorinated and deacetylated followed by coupling to benzene or an appropriate chlorobenzene to give the biphenyls labelled in the phenyl nuclei having chlorine atoms at the 4-, 2,4- or 2,3,6-positions, respectively. The structures of the labelled compounds were established by comparison with authentic samples among which 2′,3,4,4′,5- and 2,2′,3,4,4′-pentachlorobiphenyl were not earlier described.A simple method for the preparation of 2,3,6-trichloroacetanilide, unlabelled and labelled, was worked out. 2,6-Dichloroacetanilide in concentrated hydrochloric acid gave the $\text{meta}$ substituted product when treated with chlorine.An improved thin layer chromatographic technique utilizing plates impregnated with certain tetraalkylammonium salts was used for separation of some of the labelled compounds prepared.     

Formation of chlorinated phenols, dibenzo-p-dioxins, dibenzofurans, benzenes, benzoquinnones and perchloroethylenes from phenols in oxidative and copper (II) chloride-catalyzed thermal process

Formation of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and chlorinated phenols on CuCl(2) from unsubstituted phenol and three monochlorophenols was studied in a flow reactor over a temperature range of 100-425 degrees C. Heated nitrogen gas streams containing 8.0% oxygen were used as carrier gas. The 0.00024mol of unsubstituted phenol and 0.00039mol of each monochlorophenol were passed through a 1g and 1cm SiO(2) particle containing 0.5% (Cu by mass) CuCl(2). Chlorination preferentially occurred on ortho-(2, 6) and para-(4) positions. Chlorination increased up to 200 degrees C, and thereafter decreased as temperature increased. Chlorination of phenols plays an important role in the formation of the more chlorinated PCDD/Fs. Chlorinated benzenes are formed possibly from both chlorination of benzene and chlorodehydroxylation of phenols. Chlorinated phenols with ortho chlorine formed PCDD products, and major PCDD products were produced via loss of one chlorine. For PCDF formation, at least one unchlorinated ortho carbon was required.     

Microbial metabolism of N-Phenyl-1-naphthylamine in soil, soil suspensions, and aquatic ecosystems

N-Phenyl-1-naphthylamine (PNA) was degraded and mineralized in nonsterile aquatic and terrestrial samples. Degradation in unsupplemented sewage and lake water was detected in 3 to 6 days with half-lives of 5 and 10 days, respectively. In sewage and lake water supplemented with a readily degradable carbon source, degradation began in 1 and 5 days with half-lives of 2 and 8 days, respectively. Sewage samples converted between 20 and 30% of labeled [¹⁴C]-PNA to ¹⁴CO₂ in 35 days while lake water samples reached 10% conversion to ¹⁴CO₂ in 12 days. Soil samples and soil suspensions converted from 15 to 35% of [¹⁴C]-PnA to ¹⁴CO₂ in 11 days. PNA was microbiologically converted in lake water to two products that were tentatively identified by gas-liquid chromatography and mass spectroscopy as dihydroxy and N-acetyl derivatives.     

Hg Reactions in the Presence of Chlorine Species: Homogeneous Gas Phase and Heterogeneous Gas-Solid Phase

Abstract

The kinetics of Hg chlorination (with HCl) was studied using a flow reactor system with an online Hg analyzer, and speciation sampling using a set of impingers. Kinetic parameters, such as reaction order (α), overall rate constant (k′ ), and activation energy (E _a), were estimated based on the simple overall reaction pathway. The reaction order with respect to C _Hg, k′, and E _a were found to be 1.55, 5.07 x 10^-2exp(-1939.68/T) [(μg/m³)^-0.55(s)^-1], and 16.13 [kJ/mol], respectively. The effect of chlorine species (HCl, CH₂Cl₂) on the in situ Hg capture method previously de-veloped²⁸ was also investigated. The efficiency of capture of Hg by this in situ method was higher than 98% in the presence of chlorine species. Furthermore, under certain conditions, the presence of chlorine enhanced the removal of elemental Hg by additional gas-phase oxidation.     

A comparative study of polychlorinated alkanes as standards for the determination of C10-C13 polychlorinated paraffines in fish samples

Fish samples of different origins have been analysed with short column gas chromatography-electron capture negative ion/mass spectrometry (SCGC/ECNI-MS). The influence of standards composed from different polychlorinated alkanes on the quantification of short chain polychlorinated paraffines (CP) was studied. Concentration values varied very differently with the response of the standards depending on their chlorination degree. The results show, that technical CP products should not be used as standard in most cases, because the composition of polychlorinated alkanes in fish is different from sample to sample.     

Factors on the formation of disinfection by-products MX, DCA and TCA by chlorination of fulvic acid from lake sediments

[3-Chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone] (MX) and chlorinated acetic acids such as dichlorinated acetic acid (DCA) and trichlorinated acetic acid (TCA) have always been the focus of disinfection by-products (DBPs) studies. In order to find out the influences of reaction time, TOC, chlorine dose, pH and temperature on the formation of MX, DCA and TCA, we extracted fulvic acid (FA) from the sediment of Tai Lake, and conducted simulated chlorination of samples rich in FA. Results showed positive relationship between TOC and the yields of MX, DCA and TCA. But the influences of pH, chlorine dose, reaction time, and temperature are quite complex. The optimal chlorination condition for the formation of MX is pH = 2, T = 45 degrees C, C/Cl2 = 1/4, t = 12 h. Lower pH, longer time, greater chlorine dose can result in greater yield of both DCA and TCA, and there is a strong linear relationship between the formation of DCA and TCA.     

Thermal degradation of polychlorinated alkanes

Thermal degradation products of two polychlorinated alkanes (PCA) containing 59 % and 70 % chlorine, respectively, and also a commercial chlorinated paraffin (CP) containing 70 % chlorine were determined by gas chromatography and mass spectrometry. Thermolyses were performed in both inert atmosphere and air at different temperatures and times. Aliphatic and aromatic hydrocarbons and minor amounts of chlorinated substances were identified products of the medium chlorinated PCA. The highly chlorinated PCA and the commercial CP in addition gave products such as polychlorinated benzenes, toluenes, biphenyls and naphthalenes.     

富含活性氯与Al_(13)水处理药剂对铜氰络合物去除效能

含重金属铜离子与氰离子(CN)的络合物广泛存在于电镀、冶金等工业废水中,是一种较难处理的污染物。富含活性氯和Al13聚合体的水处理药剂(PACC)兼具氧化和絮凝效能,在处理含重金属氰络合物([Cu(CN)3]2-)废水方面具有良好的应用前景。研究PACC与[Cu(CN)3]2-的反应计量学、动力学,考察了pH、反应时间和投药量等影响因素,确定PACC的最佳工作参数。结果表明,PACC可同时实现对CN的氧化和对Cu2+的絮凝,有效去除水中[Cu(CN)3]2-。使用PACC对[Cu(CN)3]2-的无害化处置过程分为2个阶段:CN-首先被氧化成氰酸根(OCN-);然后OCN-被进一步氧化并生成碳酸氢根和氮气,同时所释放的游离态铜离子被絮凝去除。这2个阶段反应的最佳pH分别为11和8,去除1 mol[Cu(CN)3]2-的最佳投药量为9.35 mol Cl2的PACC;在此条件下反应43 min后,其出水中CN-和Cu2+的浓度均达到排放标准(GB21900-2008)要求。     

Toxicity of various anions associated with methoxyethyl methyl imidazolium-based ionic liquids on Clostridium sp

We investigated the effects on the growth of the anaerobic bacterium, Clostridium sp., of the ionic liquid, 1-methoxyethyl-3-methyl imidazolium [MOEMIM]⁺, derived from imidazolium cation and paired with one of a variety of counter-ions, viz., tetrafluoroborate [BF₄]^-, hexafluorophosphate [PF₆]^-_, trifluoroacetate [CF₃COO]^-, bis(trifluoromethane)sulfonamide [Tf₂N]^-, methane sulfonate [OMS], and 1-butyl-3-methyl imidazolium tetrafluoroborate [BMIM][BF₄]. These anions, in association with [MOEMIM]⁺ lowered the growth rate of the bacterium, showing the following trend: [Tf₂N]^- ≧ [PF₆]^- > [BF₄]^- > [CF₃COO]^- > [OMS]⁻. Anions incorporating fluorine were more toxic than those without it, and their toxicity rose with an increase in the number of fluorine atoms. Also, [MOEMIM]⁺[BF₄]^- was less toxic than [BMIM]⁺[BF₄]^-, probably due to the presence of a methoxyethyl functional group integrated in the cation side chain.     

Chlorination of chlortoluron: kinetics, pathways and chloroform formation

Chlortoluron chlorination is studied in the pH range of 3-10 at 25 ± 1 °C. The chlorination kinetics can be well described by a second-order kinetics model, first-order in chlorine and first-order in chlortoluron. The apparent rate constants were determined and found to be minimum at pH 6, maximum at pH 3 and medium at alkaline conditions. The rate constant of each predominant elementary reactions (i.e., the acid-catalyzed reaction of chlortoluron with HOCl, the reaction of chlortoluron with HOCl and the reaction of chlortoluron with OCl⁻) was calculated as 3.12 (± 0.10) × 10⁷ M⁻² h⁻¹, 3.11 (±0.39) × 10² M⁻¹ h⁻¹ and 3.06 (±0.47) × 10³ M⁻¹ h⁻¹, respectively. The main chlortoluron chlorination by-products were identified by gas chromatography-mass spectrometry (GC-MS) with purge-and-trap pretreatment, ultra-performance liquid chromatography-electrospray ionization-MS and GC-electron capture detector. Six volatile disinfection by-products were identified including chloroform (CF), dichloroacetonitrile, 1,1-dichloropropanone, 1,1,1-trichloropropanone, dichloronitromethane and trichloronitromethane. Degradation pathways of chlortoluron chlorination were then proposed. High concentrations of CF were generated during chlortoluron chlorination, with maximum CF yield at circumneutral pH range in solution.     

Hydroxylated polychlorobornanes--synthesis and characterization of new potential toxaphene metabolites

For decades, toxaphene had been used as a major chloropesticide. Degradation of the multicomponent mixture in the environment was mainly reported to be due to anaerobic dechlorination and hydrodechlorination. Little was known about oxidative transformation processes and the potential hydroxylated metabolites were not available as standard compounds. For this reason we synthesized hydroxylated polychlorobornanes by the UV-induced photochlorination of 2-endo-bornyl acetate with sulfuryl chloride followed by hydrolysis of the acetate moiety. The released polychlorinated 2-endo-hydroxybornanes were slightly higher chlorinated the longer the reaction was maintained. After 8 h, the main products were pentachlorinated hydroxybornanes followed by hexa- and heptachlorinated homologues. Traces of octachlorinated hydroxybornanes were also observed. The GC/ECNI-MS spectra of the products were characterized by the molecular ions and the [M-Cl]⁻ fragment ions. The molecular ions of the polychlorinated hydroxybornanes are isobaric with those of polychlorinated biphenyls. E.g. hexachlorohydroxybornanes (C₁₀H₁₂Cl₆O) and hexachlorobiphenyls (C₁₂H₄Cl₆) show the molecular ion at m/z 358. Based on fractionation experiments on silica with the synthesis products it might be possible that OH-CTTs if present in samples will elute into a more polar fraction usually discarded or not collected. Both problems might explain why these compounds have not been more frequently described in the scientific literature.     

Behaviour of [ring-C] hydroxy-simazine in a parabraun soil

[Ring-¹⁴C] hydroxy-simazine was incubated in a parabraun soil for 102 days at 22°C and 65 % of the maximum water-holding capacity. Soil samples were analyzed according to two different extraction methods on the day of application as well as after 13, 62 and 102 days. Furthermore, the influence of air-drying the soil specimens on the extraction yield was also studied. Hydroxy-simazine was converted to ¹⁴CO₂ only up to 0.2 % of the applied radioactivity. A rapid bonding of the radioactivity to the organic mass of the soil was observed, especially in the fulvic acid and humin fractions. 62 days after beginning conversion these two fractions already altogether contained up to 85 % of the labelled ring carbon applied. Whereas in the humic acids only a maximum of 4.5 % was discovered.     

Radiosynthesis of perfluorooctanesulfonate (PFOS) and perfluorobutanesulfonate (PFBS), including solubility, partition and adhesion studies

Here, we describe for the first time the synthesis of [³⁵S] PFOS and [³⁵S] PFBS with sulfur-35 enriched sulfur dioxide as the radiolabelled reagent, resulting in 2.5 and 2.3 mCi of product, respectively. Basic information concerning the physicochemical properties of perfluorooctanesulfonate (PFOS), perfluorobutanesulfonate (PFBS) and perfluorooctanoic acid (PFOA) are still limited. Hence, we utilized these radiolabelled perfluoroalkanesulfonates (PFSAs), as well as carbon-14 labelled perfluorooctanoic acid ([¹⁴C] PFOA) to determine some basic characteristics of physiological and experimental significance.The solubility of PFOS in buffered aqueous solutions at pH 7.4 was found to be severely reduced in the presence of potassium and sodium ions, which, however, did not reduce the solubility of PFOA or PFBS. PFOS was found to adhere to a small extent to polypropylene and polystyrene, whereas no such adhesion of PFOA or PFBS was detected. The extents of adhesion of PFOS and PFOA to glass were found to be 20% and 10%, respectively. For the first time, the partition coefficients for PFOS, PFBS and PFOA between n-octanol and water were determined experimentally, to be −0.7, −0.3, and 1.4, respectively, reflecting the difference in the amphiphilic natures of these molecules.     

Anaerobic testosterone degradation in Steroidobacter denitrificans - Identification of transformation products

The transformation of the androgenic steroid testosterone by gammaproteobacterium Steroidobacter denitrificans was studied under denitrifying conditions. For the first time, growth experiments showed that testosterone was mineralized under consumption of nitrate and concurrent biomass production. Experiments with cell suspensions using [4-¹⁴C]-testosterone revealed the intermediate production of several transformation products (TPs). Characterisation of ten TPs was carried out by means of HPLC coupled to high resolution mass spectrometry with atmospheric pressure chemical ionization as well as ¹H and ¹³C NMR spectroscopy. 3β-hydroxy-5α-androstan-17-one (trans-androsterone) was formed in the highest amount followed by 5α-androstan-3,17-dione. The data suggests that several dehydrogenation and hydrogenation processes take place concurrently in ring A and D because no consistent time-resolved pattern of TP peaks was observed and assays using 2 TPs as substrates resulted in essentially the same TPs. The further transformation of testosterone in S. denitrificans seems to be very efficient and fast without formation of detectable intermediates.     

Determination of trichloroacetic acid in environmental studies using carbon 14 and chlorine 36

Radioisotopes carbon 14 and chlorine 36 were used to elucidate the environmental role of trichloroacetic acid (TCA) formerly taken to be a herbicide and a secondary air pollutant with phytotoxic effects. However, use of ¹⁴C-labeling posed again known analytical problems, especially in TCA extraction from the sample matrix. Therefore—after evaluation of available methods—a new procedure using decarboxylation of [1,2-¹⁴C]TCA combined with extraction of the resultant ¹⁴C-chloroform with a non-polar solvent and its subsequent radiometric measurement was developed. The method solves previous difficulties and permits an easy determination of amounts between 0.4 and 20 kBq (10–500 ng g⁻¹) of carrier-less [1,2-¹⁴C]TCA in samples from environmental investigations. The procedure is, however, not suitable for direct [³⁶Cl]TCA determination in chlorination studies with ³⁶Cl. Because TCA might be microbially degraded in soil during extraction and sample storage and its extraction from soil or needles is never complete, the decarboxylation method—i.e. 2 h TCA decomposition to chloroform and CO₂ in aqueous solution or suspension in closed vial at 90 °C and pH 4.6 with subsequent CHCl₃ extraction—is recommended here, estimated V < 7%. Moreover, the influence of pH and temperature on the decarboxylation of TCA in aqueous solution was studied in a broad range and its environmental relevance is shown in the case of TCA decarboxylation in spruce needles which takes place also at ambient temperatures and might amount more than 10–20% after a growing season. A study of TCA distribution in spruce needles after below-ground uptake shows the highest uptake rate into current needles which have, however, a lower TCA content than older needle-year classes, TCA biodegradation in forest soil leads predominatingly to CO₂.     

The degradation of anilazine and dihydroxy‐anilazine at various soil depths of an orthic luvisol

Abstract

In conformity with Guideline 4.1 of the Federal German Biological Agency, degradation experiments with the fungicide active ingredient [benzene ring‐U‐¹⁴C]anilazine and its major metabolite [triazine ring‐U‐¹⁴C]dihydroxy‐anilazine were carried out in an orthic luvisol. Mineralization of the benzene ring carbon of anilazine amounted to less than 2 % in 110 days and that of the triazine ring carbon of dihydroxy‐anilazine to less than 8 %. Increasing the incubation temperature from 22 °C to 30 °C and adding organic substance influenced the mineralization slightly. In soils which received two or three applications in succeeding years with subsequent ageing in the open‐air lysimeter no stimulation of the mineralization was observed. Extractions after incubation showed that only 10.2 to 18.6 % of the ¹⁴C‐activity applied with anilazine was extractable with acetone/CaCl₂. The major proportion was bound in the fractions of the soil organic matter, namely 45.0 to 59.6 % of the radiocarbon applied was accounted for by the humin fraction, 12.0 to 27.4 % by the fulvic acids, and 9.4 to 15.0 % by the humic acids. In the case of dihydroxy‐anilazine, 28.9 to 89.7 % of the applied ¹⁴C‐activity was extractable with acetone/CaCl₂. Of tJhe radiocarbon bound in the soil, the greatest proportion, i.e. 18.5 to 35.5 % of the radiocarbon applied, was accounted for by the fulvic acids.     

Adsorptive removal of Pb2+ form aqueous solution by macrocyclic calix[4]naphthalene: kinetic, thermodynamic, and isotherm analysis

Background

The adsorption characteristics of Pb²⁺ ions from aqueous solutions onto calix[4]naphthalene have been investigated.

Method

Calix[4]naphthalene was prepared by the condensation of 1-naphthol and formaldehyde (1:2) in presence of hydrochloric acid at 80°C. The effect of various operation parameters, such as solution pH, initial metal ion concentration, contact time, and temperature, on the adsorption capacity of calix[4]naphthalene for Pb²⁺ have been investigated.

Result

Experimental results showed that the adsorption of Pb²⁺ ions increased with the increase in solution pH and temperature. Langmuir and Freundlich isotherms models were used to describe the adsorption behavior of Pb²⁺ by calix[4]naphthalene. Equilibrium data fitted well with the Langmuir isotherm model and the maximum adsorption capacity of calix[4]naphthalene for Pb²⁺ at 30°C was found to be 29.15 mg g^?1. Kinetic studies indicated that the adsorption followed pseudo-second order model and the thermodynamic studies revealed that the adsorption process was spontaneous and endothermic in nature. The obtained results demonstrated that calix[4]naphthalene can be used as an effective adsorbent for Pb²⁺ ions removal from water.