Temperature influence on silver nanoparticles inhibitory effect on photosystem II photochemistry in two green algae, Chlorella vulgaris and Dunaliella tertiolecta

Purpose

In this study, the effect of silver nanoparticles (AgNPs) on the photosynthetic performance of two green algae, Chlorella vulgaris and Dunaliella tertiolecta, was investigated at 25°C and 31°C.

Methods

To induce AgNPs effect, algal cells were exposed for 24?h to concentrations varying from 0 to 10?mg/L. The polyphasic OJIP fluorescence transient was used to evaluate photosystem II (PSII).

Results

We show that growth media and temperature had different effects in AgNPs agglomerates formation and Zeta potential. When temperature conditions change, inhibitory effect of AgNPs also undergoes changes. Increase of temperature induced higher altering effects to PSII quantum yield, primary photosynthetic electron transport, and consequently higher decrease of total photosynthetic performance if compared to AgNPs effect alone. AgNPs has a negative effect on D. tertiolecta compared to C. vulgaris.

Conclusion

We conclude that temperature tends to enhance the toxic effects on aquatic alga and these alterations might have serious consequences on ecosystem equilibrium and aquatic plant communities.     

Enhanced reduction of phenol content and toxicity in olive mill wastewaters by a newly isolated strain of Coriolopsis gallica

The search for novel microorganisms able to degrade olive mill wastewaters (OMW) and withstand the toxic effects of the initially high phenolic concentrations is of great scientific and industrial interest. In this work, the possibility of reducing the phenolic content of OMW using new isolates of fungal strains (Coriolopsis gallica, Bjerkandera adusta, Trametes versicolor, Trichoderma citrinoviride, Phanerochaete chrysosporium, Gloeophyllum trabeum, Trametes trogii, and Fusarium solani) was investigated. In vitro, all fungal isolates tested caused an outstanding decolorization of OMW. However, C. gallica gave the highest decolorization and dephenolization rates at 30 % v/v OMW dilution in water. Fungal growth in OMW medium was affected by several parameters including phenolic compound concentration, nitrogen source, and inoculum size. The optimal OMW medium for the removal of phenolics and color was with the OMW concentration (in percent)/[(NH₄)₂SO₄]/inoculum ratio of 30:6:3. Under these conditions, 90 and 85 % of the initial phenolic compounds and color were removed, respectively. High-pressure liquid chromatography analysis of extracts from treated and untreated OMW showed a clear and substantial reduction in phenolic compound concentrations. Phytotoxicity, assessed using radish (Raphanus sativus) seeds, indicated an increase in germination index of 23–92 % when a 30 % OMW concentration was treated with C. gallica in different dilutions (1/2, 1/4, and 1/8).

Biosorption of zinc and copper from aqueous solutions by two freshwater green microalgae Chlorella pyrenoidosa and Scenedesmus obliquus

Purpose

The objective of this study was to determine the removal of zinc and copper by two freshwater green microalgae Chlorella pyrenoidosa and Scenedesmus obliquus and to investigate changes of algal ultrastructure and photosynthetic pigment.

Methods

Algal cells were exposed for 8 days to different initial zinc or copper concentrations. Heavy metal concentrations were detected by an atomic absorption spectrophotometer. Algal growth, ultrastructure, and photosynthetic pigment were analyzed by a microplate reader, transmission electron microscope, and spectrophotometer, respectively.

Results

Low zinc and copper concentrations induced increase in algal growth, whereas application of high zinc and copper concentrations suppressed the growth of both algae. High metal concentrations also decreased the photosynthetic pigments and destroyed algal cell ultrastructure. The zinc removal efficiency by both algae increased rapidly during the first day and thereafter remained nearly constant throughout the experiment. The copper removal efficiency by both algae increased slowly during the whole experimental periods. In all cultures, the quantity of both metals removed intracellularly was much lower than the adsorbed quantity on the cell surface.

Conclusions

Both strains of the microalgae had proven effective in removing zinc and copper from aqueous solutions, with the highest removal efficiency being near 100%. In addition, C. pyrenoidosa appeared to be more efficient than S. obliquus for removing copper ions. On the contrary, S. obliquus appeared to be more efficient than C. pyrenoidosa for removing zinc ions.     

Raw and fungal-treated olive-mill wastewater effects on selected parameters of lettuce (Lactuca sativa L.) growth--the role of proline

Olive-mill wastewater (OMW) constitutes a major agricultural waste stream for which disposal is associated with significant environmental repercussions. No data are available on the effects of biotreated OMW and of the protective role of exogenously provided proline on plant physiology. In the present study, OMW was administered, either raw or previously treated by the white-rot fungus Pleurotus ostreatus, with or without proline amendment, to lettuce plants growing in sterilized sand. Biotreated OMW and proline addition resulted in significant moderation of OMW adverse effects on plant biomass production and ascorbic acid content, while their synergistic action alleviated the severe negative impact on net photosynthetic rate, water use efficiency and photosynthetic activity (Fv/Fo) invoked by the effluent. Moreover, biotreated OMW supplemented with proline, moderated the decrease in chlorophylls exerted by raw OMW, but it did not contribute at restoring carotenoids content. Restoration of plant transpiration was complete when biotreated OMW was used (with or without proline); proline alone mitigated the negative impact of OMW on photosynthetic efficiency (Fv/Fm and Fv'/Fm'). It seems that key photosynthetic parameters could be exploited as suitable evaluators of wastewater-induced plant toxicity, while plant fertigation with biotreated and/or supplemented OMW could be an interesting prospect in valorizing this effluent.     

Acute effect of benzo[a]anthracene on the biodegradation of peptone under aerobic conditions

Background

This study investigated the acute effect of benzo[a]anthracene, a significant compound among polycyclic aromatic hydrocarbons, on the biodegradation of a synthetic organic substrate??a peptone/meat extract mixture??under aerobic conditions.

Methods

A laboratory-scale sequencing batch reactor was sustained at steady state at a sludge age of 10?days with substrate feeding. Inhibition tests involved running a series of batch reactors initially seeded with the biomass obtained from the parent reactor. After the biomass seeding, the reactors were started with the peptone mixture and a range of initial benzo[a]anthracene concentrations between 0.5 and 88?mg/L. Experimental profiles of oxygen uptake rates and polyhydroxyalkanoates were evaluated by calibration of a selected model.

Results

Lower doses of benzo[a]anthracene had no effect on process kinetics. The noticeable acute impact was only observed with the addition of 88?mg/L of benzo[a]anthracene, but it was limited with the storage mechanism: the amount of organic substrate diverted to polyhydroxyalkanoates was significantly reduced with a corresponding decrease in the maximum storage rate, k _STO, from 2.7 down to 0.6?day^?1. Similarly, the maximum growth rate from internally stored polyhydroxyalkanoates was lowered from 2.3 to 1.0?day^?1.

Conclusion

Among the mechanisms for direct substrate utilization, only the hydrolysis rate was slightly reduced, but otherwise, the overall COD removal efficiency was not affected.     

Harvesting of Chlorella sp. using hollow fiber ultrafiltration

Introduction

The suitability of the application of ultrafiltration (UF) to harvest Chlorella sp. from the culture medium was examined. We investigated the effects of two improved UF system, forward air?Cwater flushing and backwash with permeate, on the concentration process.

Materials and methods

Backwash with permeate was selected as an optimization of the improved UF system, which was more effective for permeate flux recovery. Moreover, the hollow fiber UF system by adding periodical backwash with permeate was examined for Chlorella sp. harvesting.

Results and discussion

It was found that Chlorella sp. could be concentrated with high recovery in a lab-scale experiment. An overall algal biomass recovery of above 90% was achieved when the volume concentration factor was 10. For an original biomass of 1.3?±?0.05?g/L, 1?min backwash followed by 20?min forward concentrating was more effective, which resulted in a recovery of 94% and a high average flux of 30.3?L/m²/h. In addition, the algal recovery was highly correlated to the volume concentration factor and the initial biomass. A high concentration factor or a high initial biomass resulted in a low biomass recovery.     

Evaluation of the individuality of white rot macro fungus for the decolorization of synthetic dye

Introduction

A biosorbent was developed by simple dried Agaricus bisporus (SDAB) and effectively used for the biosorption of cationic dyes, Crystal Violet and Brilliant Green.

Materials and methods

For the evaluation of the biosorbent system, all the batch equilibrium parameters like pH, biomass dose, contact time, and temperature were optimized to determine the decolorization efficiency of the biosorbent. The maximum yields of dye removal were achieved at pH 4.0 for Crystal Violet (CV) and pH 5.0 for Brilliant Green (BG), which are closer to their natural pH also.

Result and discussion

Equilibrium was established at 60 and 40 min for CV and BG, respectively. Pseudo first-order, pseudo second-order, and intraparticle-diffusion kinetic models were studied at different temperatures. Isotherm models such as Freundlich, Langmuir, and Dubinin–Radushkevich were also studied. Biosorption processes were successfully described by Langmuir isotherm model and the pseudo second-order kinetic model.

Conclusions

The biosorption capacity of A. bisporus over CV and BG were found as 21.74 and 12.16 mg gm^?1. Thermodynamic parameters indicated that the CV and BG dye adsorption onto A. bisporus is spontaneous and exothermic in the single and ternary systems. Scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy were used for the surface morphology, crystalline structure of biosorbent, and dye–biosorbent interaction, respectively. This analysis of the biosorption data confirmed that these biosorption processes are ecofriendly and economical. Thus, this biomass system may be useful for the removal of contaminating cationic dyes.     

Physiological effects of arsenate on transplant thalli of the lichen Pyxine cocoes (Sw.) Nyl

Introduction

The changes in photosynthetic pigments, chlorophyll fluorescence, protein content, and antioxidant enzymes were investigated in a foliose lichen Pyxine cocoes, which was subjected to increasing concentrations of arsenate.

Methods

The arsenate concentrations of 10, 25, 50, 75, 100, and 200???M were sprayed every alternate day on the lichen thallus. The thalli were then harvested on 10, 20, 30, and 45?days.

Results

The quantity of photosynthetic pigments exhibited a decreasing trend till 20?days but increased from 30?days onwards. Concomitantly, chlorophyll fluorescence also showed a decreasing trend with increasing arsenic treatment duration as well as concentration. The higher concentration of arsenate was found to be deleterious to the photosynthesis of lichen as the chlorophyll fluorescence and the amount of pigments decreased significantly. The protein content of lichen increased uninterruptedly as the concentration of arsenate as well as duration of treatment increased. The activities of superoxide dismutase and ascorbate peroxide increased initially at lower concentration of arsenate but declined at higher concentrations and longer duration of treatment.

Conclusions

The catalase activity was found to be most susceptible to arsenate stress as its activity started declining from very beginning of the experiment. P. cocoes also proved to be an excellent accumulator of arsenate whose concentration increased in the thallus corresponding to its increase in the treatment and duration. Thus, it can be utilized for active biomonitoring of arsenic pollution.     

Characterization and lead(II), cadmium(II), nickel(II) biosorption of dried marine brown macro algae Cystoseira barbata

Purpose

The objectives of this research are to identify the functional groups and determine corresponding pK _a values of the acidic sites on dried brown algae Cystoseira barbata using FTIR and potentiometric titrations, and to investigate the biosorption ability of biomass towards divalent nickel, cadmium, and lead ions. Adsorption was studied as a function of solution pH and contact time, and experimental data were evaluated by the Langmuir isotherm model.

Methods

CaCl₂ pretreatment was applied to the sorbent for enhancing the metal uptake capacity. The effect of solution pH on biosorption equilibrium was investigated in the pH range of 1.5?C5.0. Individual as well as competitive adsorption capacity of the sorbent were studied for metal cations and mixtures.

Results

The retention of the tested metal ions was mostly influenced from pH in the range of 1.5?C2.5, then stayed almost constant up to 5.0, while Ni(II) uptake showed the highest variation with pH. Potentiometric titrations were performed to find the number of strong and weak acidic groups and their acidity constants. The density of strong and weak acidic functional groups in the biomass were found to be 0.9 and 2.26?mmol/g, respectively. The FTIR spectra of the sorbent samples indicated various functionalities on the biomass surface including carboxyl, hydroxyl, and amino and sulphonate groups which are responsible for the binding of metal ions.

Conclusions

The capacity of the biomass for single metal ions (around 1?mmol/g) was increased to 1.3?mmol/g in competitive adsorption, Pb(II) showing the highest Langmuir intensity constant. Considering its extremely high abundance and low cost, C. barbata may be potentially important in metal ion removal from contaminated water and industrial effluents.     

Biofilm formation and microbial community analysis of the simulated river bioreactor for contaminated source water remediation

Background, aim, and scope

The start-up pattern of biofilm remediation system affects the biofilm characteristics and operating performances. The objective of this study was to evaluate the performances of the contaminated source water remediation systems with different start-up patterns in view of the pollutants removal performances and microbial community succession.

Methods

The operating performances of four lab-scale simulated river biofilm reactors were examined which employed different start-up methods (natural enrichment and artificial enhancement viadischarging sediment with influent velocity gradient increase) and different bio-fillers (Elastic filler and AquaMats? ecobase). At the same time, the microbial communities of the bioreactors in different phases were analyzed by polymerase chain reaction, denaturing gradient gel electrophoresis, and sequencing.

Results and discussion

The pollutants removal performances became stable in the four reactors after 2 months?? operation, with ammonia nitrogen and permanganate index (COD_Mn) removal efficiencies of 84.41?C94.21% and 69.66?C76.60%, respectively. The biomass of mature biofilm was higher in the bioreactors by artificial enhancement than that by natural enrichment. Microbial community analysis indicated that elastic filler could enrich mature biofilm faster than AquaMats?. The heterotrophic bacteria diversity of biofilm decreased by artificial enhancement, which favored the ammonia-oxidizing bacteria (AOB) developing on the bio-fillers. Furthermore, Nitrosomonas- and Nitrosospira-like AOB coexisted in the biofilm, and Pseudomonas sp., Sphaerotilus sp., Janthinobacterium sp., Corynebacterium aurimucosum were dominant in the oligotrophic niche.

Conclusion

Artificial enhancement via the combination of sediment discharging and influent velocity gradient increasing could enhance the biofilm formation and autotrophic AOB enrichment in oligotrophic niche.     

The characteristics of waste Saccharomyces cerevisiae biosorption of arsenic(III)

Purpose

The potential of using waste Saccharomyces cerevisiae as adsorbent for the adsorption of As(III) from aqueous solution was assessed.

Methods

The biosorbent was characterized by Fourier transform infrared (FTIR) spectroscopy analysis. Various parameters including pH, biosorbent dosage, contact time, and temperature were systematically investigated.

Results and conclusions

The FTIR results of S. cerevisiae biomass showed that biomass has different functional groups, and these functional groups are able to react with metal ion in aqueous solution. Several biosorption isotherms were used to fit the equilibrium data, showing sorption to be monolayer on the heterogeneous surface of the biosorbent. The maximum biosorption capacity calculated using Langmuir model was found to be 62.908???g/g at pH?5.0, biosorbent dosage 5?g/L, contact time 240?min, and temperature 35?°C. The kinetic studies indicated that the biosorption process of the As(III) followed well the pseudo-second-order equation. The intraparticle diffusion and Richenberg models were applied to the data, and we found that the biosorption of As(III) was governed by film diffusion followed by intraparticle diffusion. The thermodynamics constants indicated that the biosorption of As(III) onto S. cerevisiae was spontaneous and endothermic under examined conditions. Biosorbent could be regenerated using 0.5?M NaOH solution, with up to 75?% recovery.     

Identification of cadmium-excluding welsh onion (Allium fistulosum L.) cultivars and their mechanisms of low cadmium accumulation

Purpose

Screening out cadmium (Cd) excluding cultivars of a crop in agricultural production is an effective way to prohibit Cd entering into food chain.

Methods

A judging criterion for Cd-excluding cultivars based on food safety was suggested and used in the identification of Cd-excluding welsh onion (Allium fistulosum L.) cultivars. A pot culture experiment was carried out to screen out Cd-excluding cultivars, of which the results were confirmed by plot experiments. The relevant factors of Cd accumulation in the pseudostem were analyzed and used in the correlation analysis aiming to study the low Cd accumulation mechanisms.

Results

The concentration of Cd in the pseudostem of welsh onions was 0.08?C0.20, 0.18?C0.41, and 0.26?C0.61?mg/kg fresh weight (FW) under three treatments (1.0, 2.5, and 5.0?mg/kg), respectively. The significant (p? ₃ ^? ?CN, and eight other elements in the tested welsh onion cultivars. Two cultivars were identified as Cd-excluding cultivars, mainly because the accumulation of Cd in their pseudostem was only 0.041?±?0.003 and 0.046?±?0.002?mg/kg FW, and 0.054?±?0.001 and 0.066?±?0.011?mg/kg FW, when growing in plots with Cd concentration of 0.49 and 0.99?mg/kg, respectively.

Conclusions

Ribentiegancongwang and Wuyeqi could be identified as Cd-excluding cultivars. Low bioaccumulation factor of the roots was the main mechanism of Cd-excluding welsh onion cultivars.     

Composition analysis and application of degradation products of whole feathers through a large scale of fermentation

Purpose

Feathers are one of the most abundant bioresources. They are discarded as waste in most cases and could cause environmental pollution. On the other hand, keratin constituted by amino acids is the main component of feathers. In this article, we reported on biorefined feathers and integrants and application of degraded products.

Materials and methods

The fermentation of whole chicken feathers with Stenotrophomonas maltophilia DHHJ in a scale-up of a 5-L bioreactor was investigated in this article. The fermentation process was controlled at 0.08 MPa pressure, 2.5 L/min airflow, and 300 rpm as 100% oxygen saturation level, 40°C, and pH 7.8.

Results

Feathers were almost completely degraded in the tested fermentation reaction with the following conditions: 80 g of whole feathers in 3 L fermentation broth for 72 h, seed age of 16 h, 100 mL inoculation amount, and 50% oxygen saturation level. The degraded products contain 397.1 mg/L soluble protein that has mass weight ranging from 10 to 160 kD, 336.9 mg/L amino acids, and many kinds of metal ions. The fermentation broth was evaluated as leaf fertilizer and found to increase plant growth to 82% or 66% for two- or fourfold dilutions, respectively. In addition, in a hair care assay, the broth showed a hair protective function by increasing weight, flexibility, and strength of the treated hair.

Conclusions

The whole feathers were degraded completely by S. maltophilia DHHJ. The degraded product includes many factors to life, such as peptides, amino acids, and mineral elements. It could be applied as leaf fertilizer and hair care product.     

Monitoring heavy metal pollution by aquatic plants

Introduction

The copper bioaccumulation by the floating Lemna minor and by the completely submerged Ranunculus tricophyllus as a function of exposure time and copper concentration was studied, with the aim of proposing these species as environmental biosensors of the water pollution.

Results

The results show that both these aquatic angiosperms are good indicators of copper pollution because the copper uptake is the only function of metal concentration (water pollution).

Conclusion

Uptake behavior is reported as a function of the time and concentration, based on the results of a 3-year study. Kinetic evaluations are proposed.     

Equilibrium, kinetic and thermodynamic studies on the biosorption of reactive acid dye on Enteromorpha flexuosa and Gracilaria corticata

Purpose

Biosorption is an emerging, eco-friendly and economical method for treating the wastewater effluents. Compared to many other biological materials, algae biomass proved to be the better biosorbent due to the presence of cell wall polymers in them.

Methods

Algal biomasses namely Enteromorpha flexuosa and Gracilaria corticata were dried, crushed and used as biosorbents. Ponceau S, a diazo dye was used as a model adsorbate for the biosorption studies. The biosorbents were characterized by Scanning Electron Microscopy, FT-IR and zero point charge. Batch studies were performed by varying pH, biosorbent dosage and initial dye concentrations. Adsorption isotherms, kinetic and thermodynamic analyses were carried out. The effect of electrolytes was also studied. Batch desorption studies were also carried out using various reagents.

Results

Isotherm data were tested with Langmuir and Freundlich isotherm models and the results suggested that the Freundlich isotherm fitted the data well. Kinetic studies were performed with varying initial dye concentrations and the data were incorporated with pseudo first-order and pseudo second-order kinetic equations and was found that the studied biosorption processes followed pseudo second-order kinetic equation. Thermodynamic parameters were evaluated at three different temperatures 293?K, 300?K and 313?K. About 95% of the dye could be desorbed from both the biosorbents.

Conclusion

Both the algal biomasses had heterogeneous surfaces and followed pseudo second-order chemical kinetics. Thermodynamic parameters proved that the biosorption by both the biomasses were spontaneous, feasible and endothermic processes. Desorption studies proved the worth of the algal biomasses as biosorbents in industrial level.     

Interpretation of ground-level ozone episodes with atmospheric stability index measurement

Purpose

This paper presents a novel approach to interpret ground-level O₃ with the measured atmospheric stability index (ASI).

Methods

O₃ concentrations were monitored by automatic analysers at three types of stations: traffic site, residential site and regional background site in 2005, and the ASI was simultaneously measured by observing radon and its short-lived decay products.

Results

The observed results showed a clear annual variation of O₃ concentrations with a maximum in spring, relatively high at the regional background site over 120?ppb, and lower at the residential and traffic sites at about 70?ppb. ASI gives information about the dilution properties of the lower boundary layer and allows to highlight the relevant role of the dilution factor in determining atmospheric pollution events. We demonstrated the analysis of O₃ night peak episodes with vertical wind and ASI.

Conclusions

With the advantage of ASI and vertical wind profiles, it was possible to isolate particular photochemical pollution phenomena of O₃ peaks from the free troposphere reservoir or formed by local reactions. This shows that the index constitutes a powerful and valuable tool for describing O₃ night-peak episodes at background station.     

Phytoremediation of 2,4-dichlorophenol using wild type and transgenic tobacco plants

Introduction

Transgenic plant strategies based on peroxidase expression or overexpression would be useful for phenolic compound removal since these enzymes play an important role in phenolic polymerizing reactions.

Material and methods

Thus, double transgenic (DT) plants for basic peroxidases were obtained and characterized in order to compare the tolerance and efficiency for 2,4-dichlorophenol (2,4-DCP) removal with WT and simple transgenic plants expressing TPX1 or TPX2 gene. Several DT plants showed the expression of both transgenes and proteins, as well as increased peroxidase activity.

Results

DT lines showed higher tolerance to 2,4-DCP at early stage of development since their germination index was higher than that of WT seedlings exposed to 25?mg/L of the pollutant. High 2,4-DCP removal efficiencies were found for WT tobacco plants. TPX1 transgenic plants and DT (line d) reached slightly higher removal efficiencies for 10?mg/L of 2,4-DCP than WT plants, while DT plants (line A) showed the highest removal efficiencies (98%). These plants showed an increase of 21% and 14% in 2,4-DCP removal efficiency for solutions containing 10 and 25?mg/L 2,4-DCP, respectively, compared with WT plants. In addition, an almost complete toxicity reduction of postremoval solutions using WT and DT plants was obtained through AMPHITOX test, which indicates that the 2,4-DCP degradation products would be similar for both plants.

Conclusion

These results are relevant in the field of phytoremediation application and, moreover, they highlight the safety of using DT tobacco plants because nontoxic products were formed after an efficient 2,4-DCP removal.     

Reference gene selection for qPCR in mussel, Mytilus edulis, during gametogenesis and exogenous estrogen exposure

Purpose

The aim of this study is to develop a normalization method for real-time PCR data by analyzing the most stably expressed control genes in mussel (Mytilus edulis) reproductive tissue.

Methods

To facilitate this, six candidate genes, including several commonly used in the literature, were investigated in mussels at different stages of gametogenesis and following experimental exposure to a model estrogen (17b-estradiol). GeNorm and NormFinder softwares were employed to assess the stability of the reference genes.

Results

Our results demonstrate that the most stable reference genes are not the same in mussels at different stages of gametogenesis and in experimentally E2-exposed mussels. Interestingly, HEL (helicase) and ACT (actin) mRNA expression levels were most affected by the stage of gametogenesis and yet, in molluscan studies, ACT is possibly the most frequently used reference gene.

Conclusions

We demonstrate that the experimental results are highly dependent on the reference gene chosen and that statistically significant contrasting differences between sample groups are present or absent depending on the reference gene employed.     

Source apportionment of ultrafine and fine particle concentrations in Brisbane, Australia

Purpose

To investigate the significance of sources around measurement sites, assist the development of control strategies for the important sources and mitigate the adverse effects of air pollution due to particle size.

Methods

In this study, sampling was conducted at two sites located in urban/industrial and residential areas situated at roadsides along the Brisbane Urban Corridor. Ultrafine and fine particle measurements obtained at the two sites in June?CJuly 2002 were analysed by positive matrix factorization.

Results

Six sources were present, including local traffic, two traffic sources, biomass burning and two currently unidentified sources. Secondary particles had a significant impact at site 1, while nitrates, peak traffic hours and main roads located close to the source also affected the results for both sites.

Conclusions

This significant traffic corridor exemplifies the type of sources present in heavily trafficked locations and future attempts to control pollution in this type of environment could focus on the sources that were identified.