Biosorption of Cd2+ and Cu2+ on immobilized Saccharomyces cerevisiae

The biosorption of Cd²⁺ and Cu²⁺ onto the immobilized Saccharomyces cerevisiae (S. cerevisiae) was investigated in this study. Adsorption kinetics, isotherms and the effect of pH were studied. The results indicated that the biosorption of Cd²⁺ and Cu²⁺ on the immobilized S. cerevisiae was fast at initial stage and then became slow. The maximum biosorption of heavy metal ions on immobilized S. cerevisiae were observed at pH 4 for Cd²⁺ and Cu²⁺. by the pseudo-second-order model described the sorption kinetic data well according to the high correlation coefficient (R ²) obtained. The biosorption isotherm was fitted well by the Langmuir model, indicating possible mono-layer biosorption of Cd²⁺ and Cu²⁺ on the immobilized S. cerevisiae. Moreover, the immobilized S. cerevisiae after the sorption of Cd²⁺ and Cu²⁺ could be regenerated and reused.     

Equilibrium,kinetics and thermodynamics of hexavalent chromium biosorption on pristine and zinc chloride activated Senna siamea seed pods

Hexavalent chromium contamination in water is an issue of huge concern due to its use at a high scale, toxicity and non-biodegradability. Biosorption is a cost effective and unconventional strategy for the elimination of Cr(VI). Here, a novel biosorbent Senna siamea seed pod biomass and its chemically activated form have been investigated for the elimination of hexavalent chromium from aqueous solution. The biosorbent was characterized by using BET, FTIR, FESEM-EDX and TGA techniques. Parameters controlling the biosorption process were optimized as pH 2.0, temperature 30°C, initial Cr(VI) concentration 500?mg/L, biosorbent dose 0.5?g/L. Optimized contact time was 210 and 180 min for pristine biomass and activated carbon, respectively. Langmuir isotherm correlated well with experimental data revealing that the biosorption occurred in monolayer pattern. Maximum biosorption capacity calculated by Langmuir biosorption isotherm was 119.18 and 139.86?mg/g for S. siamea pristine biomass and activated carbon, respectively. Pseudo-second order kinetic model correlated well with experimental data. Thermodynamic studies suggested that the biosorption process occurs in a non-spontaneous, stable and endothermic manner. These interesting findings on Cr(VI) biosorption by S. siamea seed pod biomass and S. siamea zinc chloride activated carbon vouches for its potential application as an unconventional biosorbent.     

Modelling the kinetics and equilibrium properties of cadmium biosorption by river green alga and water hyacinth weed

Cadmium biosorption properties of non-living, dried river green alga from a river source, and water hyacinth weed, Eichhornia crassipes from a lake in Zimbabwe have been investigated. The cadmium uptake was found to depend on initial pH, uptake being apparently minimal at low pH values and increasing with an increase in pH. Cadmium biosorption kinetics by both samples is fast, with 80% of total uptake occurring within 60?min. The effect of initial solution pH and initial cadmium concentration on cadmium biosorption from a cadmium solution has been studied. The data for algal biomass fitted the Langmuir monolayer adsorption isotherm, while the biosorption of the metal by water hyacinth weed fitted the Freundlich adsorption isotherm with 1/n values all less than 1. Maximum metal uptake capacities were recorded using 0.35?g of biomass and a 250?mg?L^?1 cadmium solution at pH 6.5 and at 25°C and these were about 85 and 50?mg?L^?1 for water hyacinth weed and green alga, respectively, showing that water hyacinth weed offered a greater potential for cadmium uptake. The absorption was described by pseudo-second order rate model and the rate constant and equilibrium sorption capacity are reported.     

Metal removal with two biochars made from municipal organic waste: adsorptive characterization and surface complexation modeling

The adsorptive characteristics of biochar produced from garden green waste (S-char) and a mixture of food waste and garden green waste (FS-char) were investigated. Adsorption of Cu²⁺, Zn²⁺, and Mn²⁺ onto the two biochars reached equilibrium within 48 hours. The metal adsorption was effectively described by the pseudo-second-order kinetic and Freundlich isotherm models which suggest heterogeneous chemisorption. The initial solution pH influenced adsorption of Zn²⁺ and Mn²⁺ but not of Cu²⁺. Simulation via a surface complexation model showed that the fraction of XOCu⁺ adsorbed onto biochar was increased with increasing pH until it reached the adsorption maximum at pH 8.5, while the endpoint for the maximum of XOMn⁺ was higher than pH 12.     

Kinetic and equilibrium models for the biosorption of Cr(III) on Streptomyces rimosus

This study focused on the biosorption of trivalent chromium onto mycelial bacterium (Streptomyces rimosus) biomass from effluent of tannery. The biomass was prepared by treatment with alkali. Fourier transforms-infra red analysis of the mycelial bacterial revealed the presence of carboxyl groups as possible binding sites. Experimental parameters affecting biosorption processes such as pH contact time were studied. Langmuir, Freundlich, and Temkin models were applied to describe the biosorption isotherms. The Langmuir model fitted the equilibrium data better than the Freundlich isotherm. The biosorption capacity of S. rimosus biomass for trivalent chromium was found to be 83 mg g^?1 at pH 4.8 and 3 g L^?1 biomass dosage, 300 min equilibrium time and 20°C. Kinetic evaluation of experimental data showed that the biosorption processes of trivalent chromium followed pseudo-second-order kinetics well.     

Capacity of simultaneous removal of zinc and cadmium from contaminated media, by two microalgae isolated from a polluted site

Several aquatic environments have been contaminated with heavy metals dumped via industrial effluents. Numerous studies have been published regarding the removal of single metals from aqueous solutions by microalgal biomass. However, such studies do not reflect the actual problem associated with industrial effluents because usually more than one metal species is present. Here we studied the biosorption capacity of Zn²⁺ and Cd²⁺ as single- and binary-metal systems by two microalgae, Scenedesmus obliquus and Desmodesmus pleiomorphus, isolated from a polluted site in Northern Portugal. For each metal independently, D. pleiomorphus showed a higher metal sorption capacity than S. obliquus, at concentrations ranging from 60 to 300 mg/l (except 150 mg_Cd/l). Maximum amounts of Zn²⁺ and Cd²⁺ removed were 22.3 and 60.8 mg/g by S. obliquus, and 83.1 and 58.6 mg/g by D. pleiomorphus. In binary-metal solutions, S. obliquus was in general able to remove Zn²⁺ to higher extents than Cd²⁺, whereas the opposite was observed with D. pleiomorphus. The simultaneous uptake of Zn²⁺ and Cd²⁺ by both microalgae was considerably lower than that of their single-metal counterparts, at equivalent concentrations. Although microalgal uptake from binary-metal solutions was lower than from single-metal ones, the wild microalgae selected were able to efficiently take up mixtures of Zn²⁺ and Cd²⁺ up to 300 mg/l of both metals—thus materializing a promising bioremediation vector for polluted waters.     

青霉菌对活性艳蓝 KN-R的吸附作用

研究了青霉菌(Penicillium X5)对活性艳蓝KN—R的吸附作用．通过对培养液的波谱分析和宏观现象的观察，结果表明，在72h内，脱色是由吸附引起的．当染料的浓度为100mg/L时，活菌体对染料的吸附率可达88．66％．本实验还研究了对实际应用和吸附过程有影响的几个因素，包括葡萄糖、NaCl、温度和pH.结果表明：葡萄糖浓度在0-20g／L时，随着葡萄糖浓度的增加，菌体的干重相应增加，说明对活性艳蓝KN—R的吸附具有促进作用，但浓度在10-20g／L时，吸附作用不显著；而随着NaCl浓度(0-2％)的增加，吸附率却显著降低．最佳脱色温度为25℃，pH为4．0．活菌体与死菌体的生物吸附均符合Langmuir方程，活菌体比死菌体具有更好的吸附性能．吸附在菌丝体上的染料可以用甲酵进行洗脱，菌丝球在下次使用前用蒸馏水冲洗至pH中性，此菌丝球可重复使用3次．固8表2参11     

Synthesis and characterization of an ion exchanger based on tamarind kernel powder and its application for removal of some metal ions from industrial effluents

A resin synthesized from tamarind kernel powder possesses high selectivity for metal ions. Distribution coefficients for some metal ions has been determined by the batch method. The influence of pH on ion exchange capacity and K _d value of metal ions were studied. The resin has been characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, chemical composition and ion exchange capacity (IEC). The selectivity order is Pb²⁺?>?Cu²⁺?>?Fe²⁺?>?Zn²⁺?>?Ni²⁺. Removal of metal ions from the aqueous solution and from effluents of a steel mill has been studied.     

Study of the interactions of dissolved organic matter with zinc ion and the impact of competitive metal ions (Ca2+ and Mg2+) by in situ absorbance

The bioavailability and toxicity of zinc to aquatic life depend on dissolved organic matter (DOM), such as Suwannee River Fulvic Acid (SRFA), which plays an important role in the speciation of zinc. This study examined reactions of SRFA with zinc at different concentrations from pH 3.0 to 9.0, and competitive binding of calcium/magnesium and zinc to SRFA at pH 6.0, using in situ absorbance. Interactions of Zn²⁺ with SRFA chromophores were evidenced by the emergence of features in Zn-differential spectra. Among all Zn²⁺–SRFA systems, dominant peaks, located at 235, 275 and 385 nm, and the highest intensity at 235 nm indicated the replacement of protons by the bound Zn²⁺. The Zn²⁺ binding with SRFA could be quantified by calculating the changes of the slopes of Zn-differential log-transformed absorbance in the wavelength range of 350–400 nm (denoted as DS_350–400) and by comparing the experimental data with predictions using the Non-Ideal Competitive Adsorption (NICA–Donnan) model. DS_350–400 was correlated well with the bound Zn²⁺ concentrations predicted by NICA–Donnan model with or without Ca²⁺ or Mg²⁺. Ca²⁺ and Mg²⁺ only affect intensity of the Zn-differential and Zn-differential log-transformed absorbance, not shape. In situ absorbance can be used to gain further information about Meⁿ⁺–DOM interactions in the presence of various metals.

     

Biosorption of Cu2+ from aqueous solutions by pretreated Cladosporium sp

In this paper, adsorption properties of a pretreated of Cladosporium sp. for Cu2 were studied. The fungi pretreated with some chemical reagents exhibited higher Cu2+ removal capacities than native biomass. The optimum chemical reagent was 0.2M NaOH. After 0.2M NaOH pretreatment, optimum conditions of biosorption were found to be pH 5.0, temperature 35 degrees C, and stirring speed of 100rpm. Equilibrium isotherms were obtained from adsorption experiments and the biosorption maximun capacity obtained was at 28.31mg/g. The biosorbed metal ions were effectively eluted by 0.05M HNO3 solution. After eluting, the biosorbed metal ions biomass was regenerated by washing with deionized water and then contacted with a solution containing 0. 1M of Ca2+, Mg2+ ions before further adsorption tests. The pretreated fungi biomass could be used for three cycles: biosorption, elution of biosorbed ion, regeneration of biomass.     

Biosorption of lead and cadmium using marine algae

The use of algae (Ulva fasciata, green and Sargassum sp., brown) to reduce lead and cadmium levels from mono-metal solutions was investigated. The brown algae showed higher efficiency for the accumulation of lead (～1.5 times) and cadmium (～2 times) than green algae. The optimum pH value is found to be between 4 and 5.5. Regarding biomass concentration, an increase in metals percentage removal and a decrease in metal uptake capacity coincided with the increase in biomass concentration. All light metals (Ca, Mg and Na) showed a suppressive effect on biosorption capacity. The enhancement of biosorption in the case of NaOH was obvious. The biosorption process (65–90%) occurred within 3?min. Experimental data were in high agreement with the pseudo-second-order kinetic model and Freundlich model for lead and cadmium biosorption using different biosorbents. In the desorption study, 0.2?mol?L^?1 HCl recorded the best concentration for the elution of metals from the biomass. The biosorption capacity decreased over the four operational cycles for both lead and cadmium. Infrared analysis showed that amino, hydroxyl and carboxyl functional groups provide the major biosorption sites for metal binding. Use of the above-mentioned algae for cheap metal absorbance is considered as one water treatment criterion.     

Biosorption of low level Cd~（2＋） in water by Aspergillus sojae

以酱油曲霉（Aspergillus sojae）为吸附剂,对水溶液中微量Cd2＋进行了吸附研究.实验考察了预处理方法、菌体用量、pH、温度和吸附时间对吸附的影响,同时分析了其吸附动力学和吸附等温线特性,并对酱油曲霉菌体吸附Cd2＋的可能作用机理进行了探讨.结果表明,碱预处理的菌体吸附效果最好.在菌体用量为0.08 g时,对Cd2＋的吸附量达到最大,为0.095 mg.g-1.pH值在3.4—8之间,酱油曲霉菌体对Cd2＋的吸附效果比较稳定,其最大吸附率出现在pH 3.4.温度在15℃—30℃之间时,菌体对Cd2＋的吸附率差异很小,吸附率在88.3%—94.4%之间.二级动力学方程能很好地表征酱油曲霉吸附微量Cd2＋的过程,R2在0.99以上,其吸附平衡时间大约2.5 h,线性模型更适于描述该吸附平衡过程.SEM、FTIR分析得出,Cd2＋可能是与酱油曲霉菌体表面的羟基、酰胺基、羧基、磷酸基和胺基等基团相络合而被吸附,也可能是形成颗粒沉淀而附着在菌丝上.     

Utilization of fly ash in adsorption of heavy metals from wastewater

The aim of this study was to assess the toxicity reduction of wastewaster after treatment with fly ash. Fly ash is a waste material which is formed as a result of coal burning in power plants, but has the potential to adsorb heavy metal ions. The present study examined the adsorption capacity of fly ash to adsorb Pb²⁺, Cu²⁺, and Zn²⁺ from waste water under different conditions of contact time, pH, and temperature. Uptake of metal ions by fly ash generally rose with increasing pH. At lower temperatures the uptake of heavy metal adsorption were enhanced. Significant reduction in Pb²⁺ (79%), Cu²⁺ (53%), and Zn²⁺ (80%) content was found after treatment with fly ash of waste water treatment. Using the microtox test toxicity of the effluent was reduced by 75% due to removal of Pb²⁺ ion by the fly ash. Data indicated that fly ash generated by power plants may be used beneficially to remove metals from waste water.     

Single and combined effects of heavy metals and hormones on lysosomes of haemolymph cells from the mussel Mytilus galloprovincialis

Effects of heavy metals on lysosomes were studied in living cells from the mussel (Mytilus galloprovincialis Lam.). Haemolymph cells were obtained from the mussel adductor muscle, stained with neutral red (NR), and analysed by digital imaging to evaluate NR retention times within lysosomes. Exposure to Hg²⁺, Cd²⁺ and Cu²⁺ induced a reduction of NR retention time, indicating lysosomal membrane destabilisation. The intensity of these effects was correlated with the metal affinity for sulfhydryls. In contrast, Zn²⁺ showed no effect on lysosomes. Moreover, 200 μM Zn²⁺ protected lysosomes against the effects of Cd²⁺ and Cu²⁺, but not against Hg²⁺. Cell loading with the fluorescent pH probe Lyso Sensor followed by digital imaging showed a rise of lysosomal pH induced by Cd²⁺ and Hg²⁺, while Zn²⁺ prevented the effect of Cd²⁺ and also partially that of Hg²⁺. The different protective effect of Zn²⁺ against Hg²⁺ suggests a dual action of Hg²⁺ on lysosomes, possibly involving both membrane destabilisation and proton pump inhibition. Cell exposure to 17 β-estradiol also caused a reduction of NR retention time, which was synergistic to that of Hg²⁺. This suggests a common pathway between metals and hormone, possibly involving Ca²⁺ signaling. Received: 17 November 1999 / Accepted: 29 June 2000     

优势菌种活细胞对天然水体中Pb^2＋和Cd^2＋的吸附

通过对天然水环境———伊通河中优势菌种活细胞吸附Pb2 、Cd2 的研究发现 :pH对Pb2 、Cd2 吸附的影响是不同的 ,对Pb2 的吸附量在 pH =5 .0～ 7.0时变化不大 ,对Cd2 的吸附量在 pH =6 .0～ 8.0时变化不大 ;温度对活细胞吸附Pb2 、Cd2 影响明显不同 ;活细胞对Pb2 、Cd2 的吸附量随着细菌密度的增加而增大 ,随着渗透压的增大而降低 .图 5表 1参 8     

Immobilized Lentinus edodes residue as absorbent for the enhancement of cadmium adsorption performance

To investigate the potential use of Lentinus edodes (L. edodes) residue for Cd²⁺ adsorption, poly alcohol Na alginate (PVA) was applied to immobilize it. The parameters including contact time, pH, adsorbent dosages, and coexisting metal ions were studied. The suitable pH for immobilized L. edodes was 4?C7 wider than that for raw L. edodes (pH 6?C7). In the presence of Pb²⁺ concentration varying from 0 to 30 mg·L^?1, the Cd²⁺ adsorption ratios declined by 6.71% and 47.45% for immobilized and raw L. edodes, respectively. While, with the coexisting ion Cu²⁺ concentration varied from 0 to 30 mg·L^?1, the Cd²⁺ adsorption ratios declined by 12.97% and 50.56% for immobilized and raw L. edodes, respectively. The Cd²⁺ adsorption isotherms in single-metal and dual-metal solutions were analyzed by using Langmuir, Freundlich, and Dubinin-Radushkevich models. The Cd²⁺ adsorption capacities (q _m) in single-metal solution were 6.448 mg·L^?1 and 2.832 mg·L^?1 for immobilized and raw L. edodes, respectively. The q _m of immobilized L. edodes were 1.850 mg Cd·g^?1 in Cd²⁺ + Pb²⁺ solution and 3.961 mg Cd·g^?1 in Cd²⁺ + Cu²⁺ solution, respectively. The Cd²⁺ adsorption processes subjected to both adsorbents follow pseudo-second-order model. Mechanism study showed the functional group of L. edodes was -OH, -NH, -CO, and PVA played an important role in metal adsorbing. Mining wastewater treatment test showed that PVA-SA-immobilized L. edodes was effective in mixed pollutant treatment even for wastewater containing metal ions in very low concentration.     

Removal of metal ions from aqueous solution by chelating polymeric hydrogel

Polysaccharide natural seed coat from the tree Magonia pubescens, in the form of hydrogel was used to remove metals in aqueous solution. Swelling tests indicate that seed coat presents hydrogel behavior, with maximum water absorption of 292 g water/g. Adsorption experiments performed using Na⁺, Mg²⁺, K⁺, Ca²⁺, Cr³⁺, Fe³⁺ and Zn²⁺ demonstrated that the polysaccharide structure has a high capacity to extract these ions from the aqueous solution. Scanning electron microscopy revealed significant morphological changes of the material before and after water contact. Differential scanning calorimetry measurements indicate a signal shift of the water evaporation temperature in the material with adsorbed zinc. X-ray photoelectron spectroscopy analysis combined with theoretical studies by the density functional theory and on Hartree–Fock (HF) level evidence that the metallic ions were adsorbed through coordination with hydroxyl groups of polysaccharide. In the case of Zn²⁺ the lowest HF energy was observed for the tetracoordination mode, where Zn²⁺ is coordinated by two hydroxyl groups and two water molecules.     

Oxidized multiwalled carbon nanotubes modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole for solid phase extraction and preconcentration of some metal ions

In this work, a new procedure for the enrichment of the trace amount of Cu²⁺, Ni²⁺, Co²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions based on the utilization of multiwalled carbon nanotubes (MWCNT) modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole as chelating agent prior to their determination by flame atomic absorption spectrometry has been described. The influence of effective parameters including pH, amount of ligand and MWCNT, composition of eluent, and coexisting ions on recoveries of understudy metal ions was examined. At the optimum pH of 5.0, all metal ions were quantitatively sorbed onto the proposed solid phase and completely desorbed with 8?mL of 5.0?mol?L^?1 HNO₃. The detection limit of Cu²⁺, Co²⁺, Ni²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions was 1.7, 2.4, 2.3, 2.9, 2.8, and 1.4?µg?L^?1, while the preconcentration factor was 63 for Cu²⁺ and 94 for the other metal ions and relative standard deviations between 1.8 less than 3.0%. The proposed procedure was applied for the analysis of various samples.     

Effects of Zn and ZnO nanoparticles and Zn2+ on soil enzyme activity and bioaccumulation of Zn in Cucumis sativus

The increased production and commercial use of nanoparticles (NPs), combined with a lack of regulation regarding their disposal, may result in the unwanted introduction of NPs to soils. In this study, the toxicity on soil enzyme activity and growth of Cucumis sativus treated with Zn or ZnO NPs was evaluated in pot soils. Specifically, C. sativus was cultivated in soils treated with Zn NPs, ZnO NPs or Zn²⁺ for eight weeks, after which the treatment effects on biomass and bioaccumulation were evaluated. In addition, the treatment effects on soil dehydrogenase, β -glucosidase and acid phosphatase were investigated. Soil enzyme activities were influenced by all treatments, with an especially large decrease in dehydrogenase activity in response to Zn²⁺ treatment. Biomass and root length also decreased in response to Zn²⁺ treatment. Finally, the Zn contents of C. sativus were much lower in the Zn NP and ZnO NP treatment groups than in the Zn²⁺ treatment group. Therefore, toxicity on soil microbial activity may have a greater influence than phytotoxicity due to immobilisation and aggregation of NPs in the soil.     

Application of Zr(IV) tungstate for removal of metal ions from aqueous solutions

A heteropolyacid Zr(IV) tungstate-based cation exchanger has been synthesized. An amorphous sample, prepared at pH 1.2 and having a Na⁺ ion exchange capacity of 0.92?meq?g^?1, was selected for further studies. Its physicochemical properties were determined using Fourier transform infrared spectrometer, X-ray diffraction, thermogravimetric, and scanning electron studies. To understand the cation exchange behavior of the material, distribution coefficients (K _d) for metal ions in various solvent systems were determined. Some important binary separations of metal ions, namely Mg²⁺–Bi³⁺, Cd²⁺–Bi³⁺, Fe³⁺–Bi³⁺, Th⁴⁺–Bi³⁺, and Fe³⁺–Zn²⁺, were achieved on such columns. The practical utility of these separations was demonstrated by separating Fe³⁺ and Zn²⁺ ions quantitatively in commercial pharmaceutical formulation. The cation exchanger has been successfully applied also for the treatment of industrial wastewater and a synthetic mixture. All the results suggests that Zr(IV) tungstate has excellent potential for the removal of metals from aqueous systems using packed columns of this material.