Assessment of lead, zinc, copper, nickel and chromium in total suspended particulate matter from the workplace in Al-Rusayl Industrial Estate, Oman

Total suspended particulates (TSP) were collected with a high volume sampler from the indoor work environment of 23 industries in Al-Rusayl Industrial Estate in Muscat, Oman. The values measured ranged from 39 microg m(-3) to 1033 microg m(-3). TSP in the ambient air of the area was found to have an average value of 1802 microg m(-3). TSP were analyzed for Pb, Cu, Ni, Zn and Cr. Compared to other metals, Pb emission was high with values ranging from 3 to 15 109 ng m(-3) with the mean value being 1 293 ng m(-3); Cu concentration varied from 3 to 2600 ng m(-3) with a mean value of 131 ng m(-3); Ni concentration ranged from 6 to 46 ng m(-3) with a mean value of 17 ng m(-3); Cr concentration ranged from 1 to 133 ng m(-3) with a mean value of 23 ng m(-3) while that of Zn varied from 0.01 to 1 978 ng m(-3) with the mean value being 464 ng m(-3). The concentrations of Pb, Ni, Cu, Cr, and Zn in the ambient air were also measured and found to have the following values: 122, 18, 16, 5 and 0.01 ng m(-3), respectively. These values indicate that the industries in the area do not contribute significantly to heavy metal air pollution.     

Microscopic and chemical studies of metal particulates in tree bark and attic dust: evidence for historical atmospheric smelter emissions, Humberside, UK

Tree barks and attic dusts were examined as historical archives of smelter emissions, with the aim of elucidating the pathways of pollution associated with a plume of Sn and Pb contamination in top soils, found close to the former Capper Pass smelter, Humberside, UK. Samples were collected from three villages within the area of the contamination plume. Scanning electron microscopy (SEM) and bulk chemical analyses were used to assess particle type, number and deposition patterns. SEM analysis of dusts and bark revealed that Sn and Pb particles were present in samples from all three villages along with copper, zinc and iron particles. These were almost entirely <10 microm in diameter and occurred mostly as oxides, frequently forming clusters of sub-micron crystals. Samples further from the smelter contained considerably fewer particles. We present images of smelter derived Sn particles. Chemical assays of the barks and attic dusts demonstrated that concentrations of Sn, Pb, Cu, As, Sb and Cd diminished with increasing distance from the source. Strong positive correlations were found between Sn and Pb, As, Sb and Cd in the attic dusts. Enrichment factors (EF) were calculated for these trace elements based on topsoil element concentrations obtained from the soil survey of the study area. Decreases in these trace element concentrations and EF values with distance away from the smelter are consistent with trends found in the soil survey for Sn and Pb and are typical of deposition patterns around smelter stacks. The study demonstrates that tree bark and attic dusts can be effective archives of metal particulates deposited from large static emission sources.     

Water and sediment quality of dry season pools in a dryland river system: the upper Leichhardt River, Queensland, Australia

This article presents the geochemical characteristics and physicochemical properties of water and sediment from twelve semi-permanent, dryland pools in the upper Leichhardt River catchment, north-west Queensland, Australia. The pools were examined to better understand the quality of sediments and temporary waters in a dryland system with a well-established metal contamination problem. Water and sediment sampling was conducted at the beginning of the hydroperiod in May and September 2007. Water samples were analyzed for major solute compositions (Ca, Na, K, Mg, Cl, SO(4), HCO(3)) and water-soluble (operationally defined as the <0.45 μm fraction) metals (Cd, Cu, Pb, Zn). Sediment samples were analyzed for total extractable and bioaccessible metals (As, Cd, Cu, Pb, Zn), elemental composition and grain morphology. At the time of sampling a number of pools contained water and sediment with elevated concentrations, compared to Australian regulatory guidelines, of Cu (maximum: water 28 μg L(-1); sediment 770 mg kg(-1)), Pb (maximum: water 3.4 μg L(-1); sediment 630 mg kg(-1)) and Zn (maximum: water 150 μg L(-1); sediment 780 mg kg(-1)). Concentrations of Cd and As in pools were relatively low and generally within Australian regulatory guideline values. Localized factors, such as the interaction of waters with anthropogenic contaminants from modern and historic mine wastes (i.e. residual smelter and slag materials), exert influence on the quality of pool waters. Although the pools of the upper Leichhardt River catchment are contaminated, they do not appear to be the primary repository of water and sediment associated metals when compared to materials in the remainder channel and floodplain. Nevertheless, a precautionary approach should be adopted to mitigating human exposure to contaminated environments, which might include the installation of appropriate warning signs by local health and environmental authorities.     

Assessment of potential health risk for inhabitants living near a former lead smelter. Part 1: metal concentrations in soils, agricultural crops, and homegrown vegetables

Soil contamination by metals engenders important environmental and health problems in northern France where a smelter (Metaleurop Nord) was in activity for more than a century. This study aims to look at the long-term effects of the smelter after its closedown by combining data on the degree of soil contamination and the quality of the crops grown (agricultural crops and homegrown vegetables) in these soils for a better assessment of the local population’s exposure to Cd, Pb, and Zn. Seven years after the Metaleurop Nord closedown, (1) the agricultural and urban topsoils were strongly contaminated by Cd, Pb, and Zn; (2) the kitchen garden topsoils were even more polluted than the agricultural soils, with great variability in metal concentrations within the gardens studied; (3) a high proportion of the agricultural crops for foodstuffs did not conform with the European legislation; (4) for feedstuffs, most samples did not exceed the Cd and Pb legislation limits, indicating that feedstuffs may be an opportunity for most agricultural produce; and (5) a high proportion of the vegetables produced in the kitchen gardens did not conform with the European foodstuff legislation. The high contamination level of the soils studied continues to be a risk for the environment and the population’s health. A further investigation (part 2) assesses the associated potential health risk for local inhabitants through consumption of homegrown vegetables and ingestion of soil particles by estimating the site-specific human health assessment criteria for Cd and Pb.     

Contamination from historic metal mines and the need for non-invasive remediation techniques: a case study from Southwest England

The UK is legally required by the EU Water Framework Directive (WFD) to improve the environmental quality of inland and coastal waters in the coming years. Historic metal mine sites are recognised as an important source of some of the elements on the WFD priority chemicals list. Despite their contamination potential, such sites are valued for their heritage and for other cultural and scientific reasons. Remediating historic mining areas to control the contamination of stream waters, whilst also preserving the integrity of the mine site, is a challenge but might be achieved by novel forms of remediation. In this study, we have carried out environmental monitoring at a historic, and culturally-sensitive, lead-silver mine site in southwest England and have undertaken a pilot experiment to investigate the potential for a novel, non-invasive remediation method at the site. Concentrations of Pb and Zn in mine spoil were clearly elevated with geometric mean concentrations of 6,888 and 710 microg g(-1), respectively. Mean concentrations of Pb in stream waters were between 21 and 54 microg l(-1), in exceedance of the WFD environmental quality standard (EQS) of 7.2 microg l(-1) (annual average). Mean Zn concentrations in water were between 30 and 97 microg l(-1), compared to the UK EQS of 66.5 microg l(-1) (average). Stream sediments within, and downstream from, the mining site were similarly elevated, indicating transport of mine waste particles into and within the stream. We undertook a simple trial to investigate the potential of hydroxyapatite, in the form of bonemeal, to passively remove the Pb and Zn, from the stream waters. After percolating through bonemeal in a leaching column, 96-99% of the dissolved Pb and Zn in stream water samples was removed.     

Characterisation of particulate matter emissions from the Zimbabwe Mining and Smelting Company (ZIMASCO) Kwekwe Division (Zimbabwe): a ferrochrome smelter

Particulate matter emissions from stack number 2 of a majorferrochrome smelter, Zimbabwe Mining and Smelting Company(ZIMASCO) were characterized and the rates at which the elementsCr, Fe, Cu and Zn and total ferrochrome dust are emitted into theatmosphere were determined. The extent of soil contamination bythe dust deposited around the smelter in the generally prevailingsoutheasterly wind direction around the smelter was carried out.The highest concentrations of Cr and Fe occurred in the fineparticulates of sizes less than 59 m whilst that of Cu and Znoccurred in the coarse particulates of size range 70-100 m.The emission rates from stack 2 were; total ferrochromeparticulates 62.17 kg h^-1, Cr 6.217 kg h^-1, Fe 2.423 kg h^-1, Zn42 mg h^-1 and 6 mg h^-1 for Cu. Particulate matter was emitted at arate of 289 mg m^-3 from stack number 2. This value exceeds thelegal limit of 200 mg m^-3. Chromium and iron are the metalsin the largest amounts. The particles that constitute the largestproportion of the dust were in the range of 58-107.5 m. Thisis a characteristic feature of the particulate matter emissionsfrom ZIMASCO. Soils in the downwind direction from the smelterwere polluted with Cr up to a distance of about 700 m outward fromthe perimeter of the boundary of the smelter.     

Heavy Metal Concentrations in and Around Households Near a Secondary Lead Smelter

Housedusts and garden soils were sampled in 14 houses in the vicinity of a secondary Pb smelter and analysed for concentrations of Pb, Zn, Cu, Cd, As, and Hg. Sixty-one topsoil samples were also taken from a 2 km² grid covering the smelter grounds and surrounding residential areas and analysed for concentrations of Pb, Zn, Cd and Cu. Contour maps generated from the grid data indicate significant contamination in the area (maximum Pb concentration 58 500 g g^-1), particularly down-wind of the smelter grounds. A geometric mean Pb concentration of 2225 g g^-1 was recorded in garden soil and similarly elevated levels were recorded for Zn, Cd, As and Sb. In housedusts, a geometric mean Pb concentration of 1668 g g^-1 was observed. Whilst housedust metal concentrations were generally elevated, compared to other urban or residential areas, there appears to be a large degree of attenuation of the metals between the exterior and interior environments of the homes studied. A significant correlation was not recorded between metal concentrations of garden soils and housedusts. There were significant correlations for: distance from the smelter against garden soil metal concentrations; garden soil metal concentrations against each other; housedust metal concentrations against each other; and house age against garden soil metal concentrations.     

Airborne particulate matter and BTEX in office environments

Total suspended particulate (TSP), PM(2.5) and BTEX were collected in nine offices in the province of Antwerp, Belgium. Both indoor and outdoor aerosol samples were analysed for their weight, elemental composition, and water-soluble fraction. Indoor TSP and PM(2.5) concentrations ranged from 7-31 microg m(-3) and 5-28 microg m(-3), with an average of 18 and 11 microg m(-3), respectively. Of all the elements analysed in indoor TSP, more than 95% was represented by Al, Si, K, Ca, Fe, Cl and S, accounting for 12% of the TSP by mass. The other elements showed significant enrichment relative to the earth's crust. The water-soluble ionic fraction accounted for almost 30% of the sampled indoor TSP by weight, and was enriched by anthropogenic activities. It was shown that the indoor PM levels varied among the offices, depending on the ventilation pattern, location, and occupation density of the office. Indoor BTEX levels ranged together from 5-47 microg m(-3) and were considerably higher than the corresponding outdoor levels. It was observed that some recently constructed and renovated buildings were clearly burdened with elevated levels for toluene, ethyl benzene, and xylenes, while outdoor air was found to be the main source for BTEX levels at the 'older' offices.     

燃煤电厂周边大气重金属污染特征及来源解析

为探究燃煤电厂周边大气环境中重金属的污染特征与来源,对广东某山区燃煤电厂周边地区环境和污染源的重金属进行测定,分析其污染特征,采用因子分析法和Pb同位素示踪法对环境中的重金属进行来源解析。结果表明,研究区域室内积尘中重金属浓度水平明显高于土壤重金属,污染空间分布与当地气象条件相关。环境空气TSP中重金属主要来自2个污染源,Cd、Pb、As主要来自电厂燃煤,Ca、Mn、Al、Mg主要来自土壤扬尘。TSP、降尘、积尘样品所含的Pb均与电厂采集的煤、炉渣、粉煤灰样品所含的Pb具有同源性,与其他污染源同源性不明显,说明研究区域大气中Pb污染主要来自电厂燃烧所排放的烟尘,其他污染源影响不大。     

The lichen transplant methodology in the source apportionment of metal deposition around a copper smelter in the former mining town of Karabash, Russia

The lichen transplant monitoring methodology has been tested for source apportionment of metal deposition around the Cu smelter and former mining town of Karabash. Transplants of the lichen Hypogymnia physodes (L.) Nyl., collected from a ‘control’ site in July 2001, were set up at 10 stations along a 60 km NE–SW transect centred on Karabash. Samples were collected after 2 and 3 month monitoring periods and analysed using established wet-chemical techniques. The sources of particulate investigated were the smelter blast furnace and converter, floatation tailings, metallurgical slags, local road dusts, top soils and ambient airborne total suspended particulate. From multi-element least-squares modelling the blast furnace was the main source of particulate in transplants close to the smelter (<10 km). Particulate from the converter, with relatively high Pb and Zn, was found to be more widely dispersed, being finer-grained and so having a longer atmospheric residence time. Ambient airborne particulate, sampled in Karabash town using air-pump apparatus, was almost entirely derived from the converter, very different to the lichen transplants from the same area which mainly contained blast furnace particulate. It is proposed that lichens close to the smelter mainly trapped larger blast furnace-derived particulate as they have a low capture efficiency for smaller (converter) particles. The study demonstrates the utility of lichen transplants for monitoring atmospheric deposition and highlights the caution required in their use to assess ambient air quality in human health studies.     

Trace metal concentrations in suspended particles, sediments and clams (Ruditapes philippinarum) from Jiaozhou Bay of China

Suspended particulate matter (SPM), sediments and clams were collected at three sites in Jiaozhou Bay to assess the magnitude of trace metal pollution in the area. Metal concentrations in SPM (Cu: 40.11-203; Zn: 118-447; Pb: 50.1-132; Cd: 0.55-4.39; Cr: 147.6-288; Mn: 762-1670 microg/g), sediments (Cu: 17.64-34.26; Zn: 80.79-110; Pb: 24.57-49.59; Cd: 0.099-0.324; Cr: 41.6-88.1; Mn: 343-520 microg/g) and bivalves (Cu: 6.41-19.76; Zn: 35.5-85.5; Pb: 0.31-1.01; Cd: 0.51-0.67; Mn: 27.45-67.6 microg/g) are comparable to those reported for other moderately polluted world environments. SPM showed a less clear pattern. Metal concentrations in sediments displayed a clear geographical trend with values increasing with proximity to major urban centers. The clams (on dry weight) showed a complex pattern due to the variability introduced by age-related factors. Cd showed an apparent reverse industrial trend with higher concentrations in clams collected at distant stations. Zn, Pb and Mn showed no clear geographical pattern, whereas Cu increased in the clams collected in the most industrialized area. In addition, the bioaccumulation factors (BAF) were calculated. The result indicated that the studied Ruditapes philippinarum in Jiaozhou Bay possessed different bioaccumulation capacities for Cd, Zn, Cu, Pb and Mn, and Cd, Zn had a relatively high assimilation of those metals from sediment particles. A significant relationship with clam age was observed for Zn (positive) and Cu (negative) suggesting different physiological requirements for both metals with age. Trace metal concentrations measured in the tissue of the investigated clam were in the range considered safe by the WHO for human use.     

Risk assessment of heavy metals in road and soil dusts within PM2.5, PM10 and PM100 fractions in Dongying city, Shandong Province, China

15 road and 14 soil dust samples were collected from an oilfield city, Dongying, from 11/2009-4/2010 and analyzed by inductively coupled plasma-mass spectroscopy (ICP-MS) for V, Cr, Mn, Co, Ni, Cu, Zn, As, Cd and Pb within PM(2.5), PM(10) and PM(100) fractions synchronously. Metal concentrations, sources and human health risk were studied. Results showed that both soil and road dust exhibited higher values for Mn and Zn and lower values for Co and Cd for the three fractions. Mass concentration ratios of PM(2.5)/PM(10) and PM(10)/PM(100) for metals in road and soil dust indicate that most of the heavy metals tend to concentrate in fine particles. Geoaccumulation index and enrichment factors analysis showed that Cu, Zn and Cd exhibited moderate or heavy contamination and significant enrichment, indicating the influence of anthropogenic sources. Vanadium, Cr, Mn and Co were mostly not enriched and were mainly influenced by crustal sources. For Ni, As and Pb, they ranged from not enriched to moderately enriched and were influenced by both crustal materials and anthropogenic sources. The conclusions were confirmed by multivariate analysis methods. Principle component analysis revealed that the major sources were vehicle emission, industrial activities, coal combustion, agricultural activities and crustal materials. The risk assessment results indicated that metal ingestion appeared to be the main exposure route followed by dermal contact. The most likely cause for cancer and other health risks are both the fine particles of soil and road dusts.     

Fractionation of eleven elements by chemical bonding from airborne particulate matter collected in an industrial city in Argentina

A four-step chemical sequential extraction procedure was used to evaluate the distribution of Al, As, Cr, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn in airborne particulate matter collected on glass fibre filters using a high-volume sampler. Two sets of samples were collected in 2001 (winter and summer campaigns) in representative zones of an industrial city of Argentina. The leaching scheme was applied to PM-10 particles and consisted in extracting the elements in four fractions, namely soluble and exchangeable elements; carbonates, oxides and reducible elements; bound to organic matter and sulfidic metals; and residual elements. Metals and metalloids at microg g(-1) level were determined in each fraction by inductively coupled plasma optical emission spectrometry (ICP OES). Analyte concentration varied from 14 microg g(-1) (equivalent to 1.0 ng m(-3)) for As to 11.8 mg g(-1) (equivalent to 2,089 ng m(-3)) for Al. Seven elements, namely Al, Cr, Fe, Mn, Pb, Ti and Zn showed similar distributions in both seasons while As was distributed in a significantly different manner in each season. The results exhibited low As contents in the first and second fractions that could be associated with routine coal combustion and a high content in the third and fourth fractions of the summer samples that could be linked to the use of pesticides. Aluminium, As, Cu, Mn, Ni, Ti, V and Zn were found in different percentages in the more bioavailable aqueous fraction with As, Mn, V and Zn exhibiting solubilities greater than 1% while Cr and Pb being insoluble. The content of Al, Cr, Cu, Fe, Ni, Pb, and Zn in the residual fraction was, in average, higher than 50%. A comparative assessment of the use of the underlying information available from fractionation studies compared to that obtained from total element content was done for Fe and Mn. It showed that the results obtained using chemical sequential extraction procedures allowed further discrimination of the potential air pollution sources.     

Atmospheric aerosol concentration level and chemical characteristics of water-soluble ionic species in wintertime in Beijing,China

Total suspended particulate (TSP) samples were collected during wintertime from November 24, 1998 to February 12, 1999 in Beijing. Ionic species including Cl-, NO3(-), SO4(2-), Na+, NH4(+), K+, Mg2+ and Ca2+ were determined by Ion Chromatography (IC). The sum average concentration of all the determined ions accounted for 18.9% of the TSP concentration, and SO4(2-) appeared the dominant ion with an average concentration of 30.84 microg m(-3); the sum mass concentration of SO4(2-), NO3(-), Ca2+ and NH4(+) accounted for about 83.2% of all the eight ions measured. The study indicated that the chemical form of sulfate and ammonium varies with TSP concentration levels. During heavy pollution periods, the average TSP concentration was 0.66 mg m(-3), and the NH4(+)/SO4(2-) molar ratio was low (0.58). It indicated that sulfate may present as CaSO4 and (NH4)2SO4 x CaSO4 x 2H2O. When TSP concentration (average 0.186 mg m(-3)) was relatively low, the NH4(+)/SO4(2-) molar ratio was 1.94, close to the theoretical ratio of 2 of (NH4)2SO4. Under this condition (NH4)2SO4 is expected to exist as the major form of sulfate. When the TSP concentration level was medium (average 0.35 mg m(-3)), the NH4+/SO4(2-) molar ratio appeared an average value (1.27), (NH4)2SO4, (NH4)2SO4 x CaSO4 x 2H2O and CaSO4 are expected to be present in those aerosol particles. Meteorological conditions including wind speed and wind direction were related to the TSP concentration level.     

A new method for the characterisation and quantitative speciation of base metal smelter stack particulates

Base metal smelters may be a source of particulates containing metals of environmental concern released to the atmosphere. Knowledge of the quantitative chemical speciation of particulate releases from base metal smelters will be of value in smelter emission fingerprinting, site-specific risk assessments, predictions of the behaviour of smelter stack particulates released to the environment and in resolving liability issues related to current and historic releases. Accordingly, we have developed an innovative approach comprising bulk chemical analysis, a leaching procedure, X-ray diffraction analysis and scanning electron microscopy/electron probe microanalysis characterisation in a step-wise apportioning procedure to derive the quantitative speciation of particulate samples from the stacks of three copper smelters designated as A, B and C. For the A smelter stack particulates, the major calculated percentages were 29 CuSO₄, 20 ZnSO₄.H₂O, 13 (Cu_0.94Zn_0.06)₂(AsO₄)(OH), 11 PbSO₄ and four As₂O₃. For the B smelter stack particulates, the primary calculated percentages were 20 ZnSO₄.H₂O, 20 PbSO₄, 12 CuSO₄ and nine As₂O₃. Finally, we calculated that the C smelter stack particulates mostly comprised 34 ZnSO₄.H₂O, 19 (Cu_0.84Zn_0.16)(AsO₃OH), 11 PbSO₄, 10 As₂O₃ and nine Zn₃(AsO₄)₂. Between 56% and 67% by weight of the smelter stack particulates, including the As, was soluble in water. For these and other operations, the data and approach may be useful in estimating metals partitioning among water, soil and sediment, as well as predictions of the effects of the stack particulates released to the environment.     

A Statistical Analysis of Particulate Data Sets for Jawaharlal Nehru Port and Surrounding Harbour Region in India

The concentrations of total suspended particulate matter (TSP) and particulate matter less than 10 microns (PM10) were measured at various locations in a Jawaharlal Nehru port and surrounding harbour region. Meteorological data was also collected to establish the correlation with air pollutant concentration. The results are analysed from the standpoint of monthly and seasonal variations, annual trends as well as meteorological effects. The monthly mean concentration of TSP was in the range of 88.2 to 199.3 microg m(-3). The maximum and minimum-recorded value of PM10 was 135.8 and 20.3 microg m(-3), respectively. The annual average concentration of PM10 was 66.1 microg m(-3). There are clear associations between TSP and PM10 data set at all the measured three sites with a correlation coefficient of 0.89, 0.69 and 0.81, respectively. PM10 data appears to be a constant fraction of the TSP data throughout the year, indicating common influences of meteorology and sources. Particle size analysis showed PM10 to be 47% of the total TSP concentration, which is lower than reported for industrial area and traffic junctions in Mumbai. Anthropogenic sources contribute significantly to the PM10 fraction in an industrial region, while contributions from natural sources are more in a port and harbour area. Statistical analysis of air quality data shows that TSP is strongly correlated with wind speed but weakly correlated with temperature. There appears to be a simple inverse relationship between TSP and wind speed data, indicating the dilution and transport by winds.     

Estimation of 210Po and 210Pb and its dose to human beings due to consumption of marine species of Ennore Creek, South India

A systemic study on the natural radionuclides such as (210)Po and (210)Pb in the environmental matrices and biota of Ennore Creek has been undertaken to establish a baseline data on the radiation profile of Ennore Creek environment. The environmental samples such as water, sediment, and biota (seaweeds, molluscs, crustaceans, and fishes) have been subjected to analyses. It has been observed that the concentration of (210)Po and (210)Pb in the water samples of Ennore Creek as 2.7 and 1.63 m Bq L(-1), respectively. The activity concentration of (210)Po and (210)Pb in the sediment sample was 17.9 and 28.9 Bq kg(-1), respectively. The bivalve mollusk Perna viridis have been identified to accumulate higher concentrations of (210)Po and (210)Pb suggesting that they could serve as bioindicator of radionuclides in the Ennore Creek environment. The committed effective dose for human beings was found at 81.13-216.8 and 2.1-297.2 μSv year(-1) for (210)Po and (210)Pb, respectively.     

徽县铅锌冶炼区土壤中重金属的空间分布特征

采集甘肃省徽县铅锌冶炼区域土壤样品,分析该区域内重金属污染分布规律及污染特征。结果表明,表层土壤中Pb、Cd、Cu、Zn的平均含量分别为214、3.12、25.8、79.5 mg/kg。研究区域内重金属的分布特征显示,污染浓度由冶炼厂中心向四周递减。纵向0~30 cm范围内重金属含量逐渐降低,大部分重金属污染物集中在土壤表层的0~20 cm区域,其中0~2 cm区域内含量较高,Pb和Cd的最高含量分别达到3 877、24.8 mg/kg,与国家土壤环境质量二级标准(p H 6.5~7.5)(GB 15618—1995)相比,分别超标13、82倍,属于重度污染。重金属元素的分布与土壤有机碳含量及p H相关。冶炼厂周围的重金属污染应引起有关部门的高度重视,严格控制污染源,尽快采取措施以防止污染范围进一步扩大。     

北方某市环境空气颗粒物中重金属污染状况研究

对我国北方某市大气颗粒物的污染状况进行了研究。在主导风向上设置采样点,于冬季、夏季分别采集TSP、PM₁₀、PM_2.5 3种不同动力学直径的大气颗粒物。采用ICP-MS对TSP、PM₁₀、PM_2.5中的元素浓度进行分析,并对3种不同粒径颗粒物中的10种重金属采用富集因子法进行评价。结果表明,北方某市环境空气颗粒物中富集程度最严重的为Cd、Pb;在采暖期,随着颗粒物粒径变小,Pb、Cd的富集指数呈现逐渐增大的趋势;非采暖期则无此趋势。     

Spatial variability of soil heavy metals in the three gorges area: multivariate and geostatistical analyses

There is a growing concern about environmental contamination in the three gorges area. The objectives of this study were to investigate the spatial variability and the possible influence factors of seven heavy metals (As, Cd, Cr, Cu, Hg, Pb, and Zn) in the center of this area based on multivariate and geostatistical approaches. All analyzed heavy metals were below their background levels, except Cd. The average concentrations of the analyzed elements in topsoil (0-20 cm) were 5.83 mg As kg(-1), 0.21 mg Cd kg(-1), 78.79 mg Cr kg(-1), 21.53 mg Cu kg (-1), 0.049 mg Hg kg(-1), 24.12 mg Pb kg(-1), and 68.5 mg Zn kg(-1). The concentration of As was mostly due to parent materials, whereas the source of Pb was mainly due to vehicle exhaust. The high concentration of Cd was resulted from agricultural practices and parent materials. The concentrations of Cr, Cu, Hg, and Zn were associated with parent materials and human activities.