Application of life cycle assessment for hospital solid waste management: A case study

This study was meant to determine environmental aspects of hospital waste management scenarios using a life cycle analysis approach. The survey for this study was conducted at the largest hospital in a major city of Pakistan. The hospital was thoroughly analyzed from November 2014 to January 2015 to quantify its wastes by category. The functional unit of the study was selected as 1 tonne of disposable solid hospital waste. System boundaries included transportation of hospital solid waste and its treatment and disposal by landfilling, incineration, composting, and material recycling methods. These methods were evaluated based on their greenhouse gas emissions. Landfilling and incineration turned out to be the worst final disposal alternatives, whereas composting and material recovery displayed savings in emissions. An integrated system (composting, incineration, and material recycling) was found as the best solution among the evaluated scenarios. This study can be used by policymakers for the formulation of an integrated hospital waste management plan.

Implications: This study deals with environmental aspects of hospital waste management scenarios. It is an increasing area of concern in many developing and resource-constrained countries of the world. The life cycle analysis (LCA) approach is a useful tool for estimation of greenhouse gas emissions from different waste management activities. There is a shortage of information in existing literature regarding LCA of hospital wastes. To the best knowledge of the authors this work is the first attempt at quantifying the environmental footprint of hospital waste in Pakistan.     

苏州市生活垃圾两种处置方法的生命周期影响评价

采用生命周期评价的方法,比较了苏州市垃圾填埋和垃圾焚烧2种处置方法对环境的影响。研究的系统范围主要包括垃圾收集、垃圾运输、垃圾填埋或焚烧以及发电等几个部分。采用收集的垃圾组分数据,利用IPCC推荐的模型等,计算了垃圾填埋和垃圾焚烧时CO₂等气体污染物的排放量。根据对垃圾渗滤液的实测数据,计算了水污染物的排放量。环境影响评价采用日本开发的AIST-LCA Ver4计算机软件进行。计算结果表明：垃圾填埋的生态币值要大得多,可见垃圾焚烧对环境的影响比垃圾填埋的影响要小。所获得的结论较为客观地反映了对环境的影响,可以作为中国城市垃圾处置决策的参考依据。     

Preliminary investigation of greenhouse gas emissions from the environmental sector in Taiwan

The United Nations Framework Conventions on Climate Change (UNFCCC) asks their Parties to submit a National Inventory Report (NIR) for greenhouse gas (GHG) emissions on an annual basis. However, when many countries are quickly growing their economy, resulting in substantial GHG emissions, their inventory reporting systems either have not been established or been able to be linked to planning of mitigation measures at national administration levels. The present research was aimed to quantify the GHG emissions from an environmental sector in Taiwan and also to establish a linkage between the developed inventories and development of mitigation plans. The "environmental sector" consists of public service under jurisdiction of the Taiwan Environmental Protection Administration: landfilling, composting, waste transportation, wastewater treatment, night soil treatment, and solid waste incineration. The preliminary results were compared with that of the United States, Germany, Japan, United Kingdom, and Korea, considering the gaps in the scopes of the sectors. The GHG emissions from the Taiwanese environmental sector were mostly estimated by following the default methodology in the Intergovernmental Panel on Climate Change guideline, except that of night soil treatment and waste transportation that were modified or newly developed. The GHG emissions from the environmental sectors in 2004 were 10,225 kilotons of CO2 equivalent (kt CO2 Eq.). Landfilling (48.86%), solid waste incineration (27%), and wastewater treatment (21.5%) were the major contributors. Methane was the most significant GHG (70.6%), followed by carbon dioxide (27.8%) and nitrous oxide (1.6%). In summary, the GHG emissions estimated for the environmental sector in Taiwan provided reasonable preliminary results that were consistent and comparable with the existing authorized data. On the basis of the inventory results and the comparisons with the other countries, recommendations of mitigation plans were made, including wastewater and solid waste recycling, methane recovery for energy, and waste reduction/sorting.     

广州市生活垃圾高温有氧静态堆肥的生命周期分析

运用生命周期分析(LCA)方法,对广州市生活垃圾高温有氧静态堆肥系统进行分析,计算出全生命周期的资源消耗和环境影响潜值,同时与垃圾焚烧典型工艺的LCA数据进行对比。结果表明,堆肥处理的环境影响负荷为0.023PET90,资源消耗系数为9.238mPET90。环境影响类型中光化学臭氧合成造成的影响最大,占环境总影响的43.8%。与焚烧处理方式相比,高温有氧静态堆肥的环境总影响较小,环境影响负荷相比于焚烧减少20.3%,在降低酸化的影响方面有较为显著的作用。     

北京和上海典型复合包装废物处置环境影响比较

采用生命周期评价法研究比较了北京和上海两地纸塑铝复合包装处置阶段的环境影响。通过现场和资料调研的方式获得此阶段的能量物质的输入输出和环境外排数据。结果表明:北京和上海两地纸塑铝复合包装处置阶段的环境影响潜值分别为-0.428 Pt和9.776 Pt,其主要集中在气候变化、土地占用和无机物对健康的损害三方面;每提高10%的回收率,其环境影响潜值北京和上海可分别降低5.446 Pt和5.799 Pt;上海地区纸塑铝复合包装处置阶段对环境的影响在任何同回收率的情况都要高于北京地区,其主要原因是上海地区填埋产生的温室气体释放量过大和再生企业距离打包点较远。     

安全土地填埋技术在我国的应用

沈阳市固体废物处置中心对工业危险废物采用了安全土地填埋技术 ,它的主要特点是安全、工艺简单、可操作性强。能够杜绝危险废物渗析液下渗污染地下水 ,同时又避免了危险废物污染环境卫生。本文主要以沈阳工业危险废物处置填埋场为例 ,介绍安全土地填埋的技术要求、设计要点等     

Emission inventory for greenhouse gases in the City of Barcelona, 1987–1996

Emissions of greenhouse gases for the City of Barcelona are estimated for the period 1987–1994. The sources considered are: public and private transportation; industrial, commercial and domestic activities; and municipal solid waste disposal. The results show that the main source of CO₂ emissions in Barcelona is private vehicle transportation, which accounts, as an average for the period studied, for 35% of total emissions. The second most important source is the municipal solid waste landfill facility of the city (24% of total emissions). The percentages for the remaining sources under consideration were: 14% electricity, 12% natural gas, 5% incineration, and 3% liquefied petroleum gases. However, the values for CO₂ emissions per inhabitant over the period studied are lower than those for any other industrialized city available for comparison. This is closely related to the high percentage of electricity generation from nuclear power stations and hydro power facilities, and also to the extensive use of natural gas for domestic uses.     

Investigation of 1,4-dioxane originating from incineration residues produced by incineration of municipal solid waste

As a groundwater contaminant, 1,4-dioxane is of considerable concern because of its toxicity, refractory nature to degradation, and rapid migration within an aquifer. Although landfill leachate has been reported to contain significant levels of 1,4-dioxane, the origin of 1,4-dioxane in leachate has not been clarified until now. In this study, the origins of 1,4-dioxane in landfill leachate were investigated at 38 landfill sites and three incineration plants in Japan. Extremely high levels of 1,4-dioxane 89 and 340 microg l(-1), were detected in leachate from two of the landfill sites sampled. Assessments of leachate and measurement of 1,4-dioxane in incineration residues revealed the most likely source of 1,4-dioxane in the leachate to be the fly ash produced by municipal solid waste incinerators. Effective removal of 1,4-dioxane in leachate from fly ash was achieved using heating dechlorination systems. Rapid leaching of 1,4-dioxane observed from fly ash in a sequential batch extraction indicated that the incorporation of a waste washing process could also be effective for the removal of 1,4-dioxane in fly ash.     

天津市文明生态村生活垃圾处理方案优选

根据天津市文明生态村生活垃圾的特点和组成成分,以垃圾的分类收集和分类处理为前提,采用费用-效益分析法和层次分析法,对填埋、堆肥和焚烧处理方案分别进行费用-效益分析和经济、技术、环境、政策综合分析。结果表明,堆肥和焚烧的费用-效益分析得分为0.96和0.786,填埋不产生效益;堆肥、焚烧和填埋的层次分析法得分为7.74、4.28和5.45,堆肥方案的得分最高,其次为填埋,天津市文明生态村生活垃圾宜采用堆肥+填埋处理方案。     

Ammonia emissions from the composting of different organic wastes. Dependency on process temperature

Ammonia emissions were quantified for the laboratory-scale composting of three typical organic wastes with medium nitrogen content: organic fraction of municipal solid wastes, raw sludge and anaerobically digested sludge; and the composting of two wastes with high nitrogen content: animal by-products from slaughterhouses and partially hydrolysed hair from the leather industry. All the wastes were mixed with the proper amount of bulking agent. Ammonia emitted in the composting of the five wastes investigated revealed a strong dependence on temperature, with a distinct pattern found in ammonia emissions for each waste in the thermophilic first stage of composting (exponential increase of ammonia emitted when increasing temperature) than that of the mesophilic final stage (linear increase of ammonia emissions when increasing temperature). As composting needs high temperatures to ensure the sanitisation of compost and ammonia emissions are one of the main environmental impacts associated to composting and responsible for obtaining compost with a low agronomical quality, it is proposed that sanitisation is conducted after the first stage in large-scale composting facilities by a proper temperature control. CAPSULE: Ammonia emission pattern and correlation with process temperature are presented for the composting process of different organic wastes.     

The impact of municipal solid waste management on greenhouse gas emissions in the United States

Technological advancements, environmental regulations, and emphasis on resource conservation and recovery have greatly reduced the environmental impacts of municipal solid waste (MSW) management, including emissions of greenhouse gases (GHGs). This study was conducted using a life-cycle methodology to track changes in GHG emissions during the past 25 years from the management of MSW in the United States. For the baseline year of 1974, MSW management consisted of limited recycling, combustion without energy recovery, and landfilling without gas collection or control. This was compared with data for 1980, 1990, and 1997, accounting for changes in MSW quantity, composition, management practices, and technology. Over time, the United States has moved toward increased recycling, composting, combustion (with energy recovery) and landfilling with gas recovery, control, and utilization. These changes were accounted for with historical data on MSW composition, quantities, management practices, and technological changes. Included in the analysis were the benefits of materials recycling and energy recovery to the extent that these displace virgin raw materials and fossil fuel electricity production, respectively. Carbon sinks associated with MSW management also were addressed. The results indicate that the MSW management actions taken by U.S. communities have significantly reduced potential GHG emissions despite an almost 2-fold increase in waste generation. GHG emissions from MSW management were estimated to be 36 million metric tons carbon equivalents (MMTCE) in 1974 and 8 MMTCE in 1997. If MSW were being managed today as it was in 1974, GHG emissions would be approximately 60 MMTCE.     

有机垃圾的处理和资源化技术进展

有机垃圾具有易腐烂、热值低、有机质含量丰富等特点,常规的填埋和焚烧难以妥善处理。文章在分析各类有机垃圾组成和特性的基础上,认为堆肥化处理、厌氧发酵和综合利用应是有机垃圾处理和处置的发展趋势,这不仅有利于消除污染、保护环境,还能最大程度地实现物质和能量的自然循环。     

城市生活垃圾卫生填埋场恶臭的防治技术进展

恶臭污染已成为垃圾处理和处置过程中的严重公害。在分析中,介绍了填埋场各区域恶臭的控制措施,综述了卫生填埋场恶臭的常规防治技术,重点讨论了生物技术在填埋场脱臭中的应用,这些防治技术对各类环境卫生设施,如垃圾收集站、中转站、焚烧场、堆肥厂及粪便处理厂的臭气治理均有借鉴意义。     

Application of fluidized bed combustion to industrial waste treatment

Landfill and sea-dumping appear to be on their way out as acceptable methods for the disposal of untreated industrial wastes in Taiwan. Recently, there has been interest in the application of fluidized bed technology to waste incineration for efficient energy utilization and environmental protection. A pilot fluidized bed combustion system was used to investigate the incineration performance and parametric test for the waste from an industrial park. According to the experimental results, the appropriate operating conditions, including temperatures of 800-840 degrees C, aeration rates of U(0)/Um(f)-2.0 or so, and on-bed feeding, were recommended to treat such waste. The emissions of SO(x), NO(x) and CO in flue gas meet the ROC-EPA regulation.     

Life cycle and economic assessment of source-separated MSW collection with regard to greenhouse gas emissions: a case study in China

In China, the continuously increasing amount of municipal solid waste (MSW) has resulted in an urgent need for changing the current municipal solid waste management (MSWM) system based on mixed collection. A pilot program focusing on source-separated MSW collection was thus launched (2010) in Hangzhou, China, to lessen the related environmental loads. And greenhouse gas (GHG) emissions (Kyoto Protocol) are singled out in particular. This paper uses life cycle assessment modeling to evaluate the potential environmental improvement with regard to GHG emissions. The pre-existing MSWM system is assessed as baseline, while the source separation scenario is compared internally. Results show that 23 % GHG emissions can be decreased by source-separated collection compared with the base scenario. In addition, the use of composting and anaerobic digestion (AD) is suggested for further optimizing the management of food waste. 260.79, 82.21, and ?86.21 thousand tonnes of GHG emissions are emitted from food waste landfill, composting, and AD, respectively, proving the emission reduction potential brought by advanced food waste treatment technologies. Realizing the fact, a modified MSWM system is proposed by taking AD as food waste substitution option, with additional 44 % GHG emissions saved than current source separation scenario. Moreover, a preliminary economic assessment is implemented. It is demonstrated that both source separation scenarios have a good cost reduction potential than mixed collection, with the proposed new system the most cost-effective one.     

Methane balance of a bioreactor landfill in Latin America

This paper presents results from a methane (CH4) gas emission characterization survey conducted at the Loma Los Colorados landfill located 60 km from Santiago, Chile. The landfill receives approximately 1 million metric tons (t) of waste annually, and is equipped with leachate control systems and landfill gas collection systems. The collected leachate is recirculated to enable operation of the landfill as a bioreactor. For this study, conducted between April and July 2000, a total of 232 surface emission measurements were made over the 23-ha surface area of the landfill. The average surface flux rate of CH4 emissions over the landfill surface was 167 g x m(-2) x day(-1), and the total quantity of surface emissions was 13,320 t/yr. These values do not include the contribution made by "hot spots," originating from leachate pools caused by "daylighting" of leachate, that were identified on the landfill surface and had very high CH4 emission rates. Other point sources of CH4 emissions at this landfill include 20 disconnected gas wells that vent directly to the atmosphere. Additionally, there are 13 gas wells connected to an incinerator responsible for destroying 84 t/yr of CH4. The balance also includes CH4 that is being oxidized on the surface of the landfill by meth-anotrophic bacteria. Including all sources, except leachate pool emissions, the emissions were estimated to be 14,584 t/yr CH4. It was estimated that less than 1% of the gas produced by the decomposition of waste was captured by the gas collection system and 38% of CH4 generated was emitted to the atmosphere through the soil cover.     

Optimization for municipal solid waste treatment based on energy consumption and contaminant emission

This paper analyzes the characterization of energy consumption and contaminant emissions from a municipal solid waste (MSW) treatment system that comprises transfer station, landfill site, combustion plant, composting plant, dejecta treatment station, and an integrated MSW treatment plant. The consumed energy and energy medium materials were integrated under comprehensive energy consumption (CEC) for comparison. Among typical MSW disposal methods such as combustion, composting, and landfilling, landfilling has the minimum CEC value. Installing an integrated treatment plant is the recommended MSW management method because of its lower CEC. Furthermore, this method is used to ensure process centralization. In landfill sites, a positive linear correlation was observed between the CEC and contaminant removal ratios when emitted pollutants have a certain weight coefficient. The process should utilize the minimum CEC value of 5.3702 kgce/t MSW and consider energy consumption, energy recovery, MSW components, and the equivalent of carbon dioxide emissions.     

砒霜生产化工厂危险废物处置工程设计

通过对砒霜生产化工厂原场址废渣及污染场地调查的基础上,进行了处置方案比选及技术经济比较,确定了就地安全填埋的处置方案。根据区域性危险废物集中安全填埋场的设计经验,本工程采用先进的HDPE双层防渗的安全填埋方式,并设置了雨水分流系统、渗滤液收集系统、封场处理和填埋气体导排系统,整个场区布置合理,对周围环境的影响小,投资少,取得了良好的社会效益和环境效益,并对危险废物处理处置工程设计中应注意的问题提出了建议。     

Polymers as Solid Waste in Municipal Landfills

Abstract

Synthetic polymers reach municipal landfills as components of products such as waste household paints, packaging films, storage containers, carpet fibers, and absorbent sanitary products. Some polymers in consumer products that reach landfills are designed to photodegrade or biodegrade. This article examines the significance of degradable polymers in management of solid waste in municipal landfills. Most landfills are not designed to photodegrade or biodegrade solid waste. Landfill disposal of stable polymers such as polyacrylics and polyethylenes is not associated with significant polymer degradation or mobility. Stability to photodegradation and biodegradation is an advantage when municipal landfills are used for disposal of polymer products as solid waste. Use of landfill disposal can be a responsible means to manage polymer waste and can be part of an overall waste management plan which includes source reduction, recycling, reuse, composting, and waste-to-energy incineration.     

渗滤液回流对不同填埋结构甲烷变化规律的影响研究

建立了大型模拟填埋试验装置,研究了渗滤液回流对不同填埋结构甲烷变化规律的影响.每周对填埋气体中甲烷浓度进行监测.结果表明:厌氧填埋中回流操作使甲烷浓度峰值提前了147 d,峰值为59.6%(体积分数,下同);准好氧填埋中回流操作使甲烷浓度峰值提前259 d,峰值为44.7%.回流操作使甲烷产气高峰提前,增加产气量,加快填埋垃圾稳定,减轻渗滤液污染.厌氧填埋中进行回流操作有利于甲烷的回收利用;准好氧填埋结构可有效减少甲烷的排放,减小对环境的危害.稳定期的垃圾填埋体进行回流产生一定的甲烷,但浓度较低,最高仅26.0%,没有利用价值.