Phytoremediation of Nickel-Contaminated Soils by Brassica Species

Two Brassica species Brassica juncea and Brassica carinata of the Indian mustard, were grown in an artificially Ni-contaminated soil to study the tolerance and Ni accumulation. Chelating agent, EDTA was applied at the rosette stage for enhancing the metal uptake. Nickel concentration over almost double that in control was observed in both the species with Ni contamination along with EDTA application. Specie B. juncea appeared to be slightly more tolerant and higher accumulator of Ni. In agreement with the earlier reports, the translocation of the pollutant metal to the shoot from the root seemed to be restricted in both of Brassica species at higher rate of Ni application plus EDTA. The results of the present study indicated that B. juncea has the potential to be hyperaccumulator of Ni.     

Phytoremediation of contaminants of emerging concern from soil with industrial hemp (Cannabis sativa L.): a review

Environment, Development and Sustainability - The presence of contaminants of emerging concern (CECs) in wastewater treatment plant effluents is a significant underlying health risk and...     

Phytoaccumulation of heavy metals by aquatic plants

Three aquatic plants were examined for their ability to remove heavy metals from contaminated water: parrot feather (Myriophylhum aquaticum), creeping primrose (Ludwigina palustris), and water mint (Mentha aquatic). The plants were obtained from a Solar Aquatic System treating municipal wastewater. All the three plants were able to remove Fe, Zn, Cu, and Hg from the contaminated water. The average removal efficiency for the three plant species was 99.8%, 76.7%, 41.62%, and 33.9% of Hg, Fe, Cu, and Zn, respectively. The removal rates of zinc and copper were constant (0.48 mg/l/day for Zn and 0.11 mg/l/day for Cu), whereas those of iron and mercury were dependent on the concentration of these elements in the contaminated water and ranged from 7.00 to 0.41 mg/l/day for Fe and 0.0787 to 0.0002 mg/l/day for Hg. Parrot feather showed greater tolerance to toxicity followed by water mint and creeping primrose. The growth of creeping primrose was significantly affected by heavy metal toxicity. The selectivity of heavy metals for the three plant species was the same (Hg>Fe>Cu>Zn). The mass balance preformed on the system showed that about 60.45-82.61% of the zinc and 38.96-60.75% of the copper were removed by precipitation as zinc phosphate and copper phosphate, respectively.     

Phytoremediation of polychlorinated biphenyl-contaminated soils: the rhizosphere effect

The objective in the first phase of this study was to screen alfalfa, flatpea, sericea lespedeza, deertongue, reed canarygrass, switchgrass, and tall fescue for phytoremediation of polychlorinated biphenyl (PCB)-contaminated soil. During the second phase, the focus was rhizosphere characterization to optimize PCB phytoremediation. Aroclor 1248 (PCB) was added to soil at 100 mg x kg(-1) of soil. In the first phase, all of the plant species treatments showed significantly greater PCB biodegradation compared to the unplanted controls and the two most effective species were selected for further study. During the rhizosphere characterization study, soil irradiation did not affect PCB biodegradation, but planting significantly increased PCB biodegradation; 38% or less of the initial PCB was recovered from planted pots, compared to more than 82% from the unplanted control soils. Presence of plants significantly increased the biological activity (microbial counts and enzyme activity) of both irradiated and unirradiated soils. Greater bacterial counts and soil enzyme activity were closely related to higher levels of PCB biodegradation. The data showed that Aroclor 1248 biodegradation in soil seem to be positively influenced by the presence of plants and plant-bacteria interactions. Our results suggested that phytoremediation could be an environmentally friendly alternative for PCB-contaminated soils.     

A review of a community-based approach to combating land degradation: dryland salinity management in Australia

Degradation of farmland caused by salinisation is a major environmental issue in Australia. To combat salinisation a community-based approach has been adopted. This paper reviews the nature and effectiveness of this approach, describing its rationale, strengths and weaknesses. The community-based approach is shown to have been highly successful in raising awareness and providing education about the problem of dryland salinity in Australia, and has encouraged group participation in managing the problem. The approach has allowed some internalisation of the externalities associated with dryland salinity, with peer group and community pressure helping to address some salinity problems. However, the approach has not greatly lessened the threat of salinisation. Community and regional groups continue to receive the bulk of salinity management funding yet it is funding for development of new innovations, technologies and policies that is also critical to combating salinity. A conclusion is that there may have been an over-investment in the community-based approach and under-investment in the development of skills and research infrastructure required to develop innovative solutions to lessen the cost of salinity. Readers should send their comments on this paper to BhaskarNath@aol.com within 3 months of publication of this issue.     

Phytoremediation of aquaculture wastewater for water recycling and production of fish feed

Five plants were examined for their ability to remove nutrients from aquaculture wastewater and suitability as fish feed: alfalfa, white clover, oat, fall rye, barley. The seeds were first germinated in water in a hydroponic system, and the plants were fed wastewater from Tilapia production facility. Clover and alfalfa seeds were infected with fungus shortly after germination, and their roots were completely destroyed by day 14. Oat, rye and barley had the fastest growth and showed greater tolerance to fungal disease compared with alfalfa and clover. Although substantial amounts of soluble and insoluble substances were released by the seeds during the germination period, the plants were able to remove all the pollutants in wastewater and significant portions of those released substances. The total reductions in total solids, COD, NO3-N, NO2-N, phosphate and potassium ranged from 54.7% to 91.0%, 56.0% to 91.5%, 82.9% to 98.1%, 95.9% to 99.5%, 54.5% to 93.6% and 99.6% to 99.8%, respectively. Oat, barley and rye grow well in this type of hydroponic system and can be used as a fish feed after being supplemented with fat, Ca, Na, Mn and Fe. Oil seeds and the chlorides of these elements could be added to these plants when formulating the fish feed. For a continuous operation, a two-unit system could be configured to allow for one week germination and one week cleaning and startup in one unit while the other unit is in operation.     

Predicting hot-spots of land use changes in Italy by ensemble forecasting

In the context of environmental change projections at the regional level, not only the climate but also the land use plays a key role. The limited availability of historical information reduces the possibility to calibrate land use change (LUC) models. Even in case of successful calibration, using it both for diagnostic and prognostic studies does not guarantee the reliability of single future simulations. Through ensemble forecasting, useful LUC predictions are evaluable. In this work, after introducing a modified version of the well-assessed CLUE-S model, we present reasonable hot-spots of LUC in Italy for the end of 21st century, derived from the agreement of a 32 simulation ensemble performed alternating two choices for five model configurations or inputs: (1) two different climate projections (reflecting A2 and B2 emission scenarios by IPCC, respectively); (2) two different degrees (slight and strong) of demographic increase; (3) the conservation (or not) of protected areas; (4) the influence (or not) among adjacent land uses in determining their shift; and (5) the importance (or not) of past/recent LUC trends. Results, in terms of LUC hot-spot distribution, were evaluated at administrative, biogeographical, physiographic, and watershed level. The main findings highlighted that some trends of land use substitution will be likely opposite to the past and that a more detailed spatial scale can detect situations neglected by coarser scale evaluations, and due to different transpositions of directives from high-levels to local scales. Biogeographical and physiographic settings seem strongly influencing LUCs, and administrative and catchment units across Italy show very different developments and a highly fragmented territory in terms of LUC hot-spots, all that to be considered in landscape and resource planning.     

Strategies of heavy metal uptake by plants growing under industrial emissions

Total concentrations of Al, Ba, Ca, Cr, Cu, Fe, K, Mg, Mn, Pb and Zn have been estimated in soil (A-horizon) and in leaves and stem samples of two Mediterranean species (Nerium oleander L. and Pinus pinea L.) growing in an industrial area in Spain (Huelva). Both species showed a different behaviour for the elements studied. Bark and leaves of both species acted as excluders of Al, Ba, Cr, Fe and Pb, N. oleander acted as indicator of Cu and Zn and, needles and bark of P. pinea behaved as accumulators of Cu. The enrichment ratio data indicated that Cu in soil and plant was enhanced with anthropogenic activities, with industrial activities being the primary contributor for Cu. All the other elements studied were controlled by natural source variations, but Pb could also be anthropogenically enhanced. Wood did not accumulate pollutants, with the translocation from bark being rather reduced. Uptake patterns of metals into foliage and bark tissues were more or less the same in both species for almost all the studied elements, which indicates that both plant parts could be indifferently used as biomonitors.     

A review of regulatory decisions for environmental protection: part II - the case-study of contaminated land management in Portugal

This paper provides a case-study analysis of the challenges in the implementation of national soil policies, which was developed by the authors in Part I of the review of regulatory decisions for environmental protection [Rodrigues SM, Pereira ME, Ferreira da Silva E, Hursthouse A, Duarte AC. A review of regulatory decisions for environmental management: Part I-challenges in the implementation of national soil policies. Environ Int 2009. doi:10.1016/j.envint.2008.08.007]. The Portuguese case was selected as a case-study since specific regulatory decisions for contaminated land management are still in the early stages of development. Given the gap between the situation at the EU level and the state of Portuguese soil policy development, it is of merit to consider national contaminated land policy regimes already in place within the EU and to see if these provide a suitable basis to define the main challenges and research needs for the implementation of a Portuguese contaminated land management strategy. A framework combining the D-P-S-I-R (drivers-pressures-sources-impacts-responses) structure of policy evaluation with the Source-Pathway-Receptor approach to health risk assessment is proposed to derive an effective regulatory framework for managing contaminated land in Portugal, using available information and only to develop new data and research where knowledge gaps exist. Funding site clean-up and assigning liability were identified as relevant factors currently hampering site remediation. Most relevant research needs for the development of contaminated land management practices in Portugal are those associated to the definition of a risk assessment framework and setting guidelines for the evaluation of risks posed to both humans and ecosystems. Other relevant and innovative features are the integration of soil function analysis into site investigations and the definition of a framework that combines risk assessment with soil function analysis. The analysis of the Portuguese case also provides insight into the discussions needed for the effective development of regulatory decisions for contaminated land management in countries with no history of implementing specific soil policies.     

Removal of nutrients and heavy metals from anaerobic waste by aerobiological treatment

This study was conducted to investigate the effectiveness of aerobic biological treatment in removal of nitrogen, phosphorous, and heavy metals from a unique anaerobic liquid waste, produced at a solid waste-to-methane anaerobic digestion facility. Laboratory scale continuous flow activated sludge reactors were employed in this study. The liquid waste has moderate BOD/COD ratio with BOD concentration of 1300 mg/L and high concentration of essential nutrients, making the liquid waste biologically treatable. Results showed that aerobic biological treatment can remove nitrogen and phosphorous on the order of 85%. Metal removal efficiencies vary widely for 11 metals studied in this investigation.     

A critical review of the bioavailability and impacts of heavy metals in municipal solid waste composts compared to sewage sludge

The content, behaviour and significance of heavy metals in composted waste materials is important from two potentially conflicting aspects of environmental legislation in terms of: (a) defining end-of-waste criteria and increasing recycling of composted residuals on land and (b) protecting soil quality by preventing contamination. This review examines the effects of heavy metals in compost and amended soil as a basis for achieving a practical and sustainable balance between these different policy objectives, with particular emphasis on agricultural application. All types of municipal solid waste (MSW) compost contain more heavy metals than the background concentrations present in soil and will increase their contents in amended soil. Total concentrations of heavy metals in source-segregated and greenwaste compost are typically below UK PAS100 limits and mechanical segregated material can also comply with the metal limits in UK PAS100, although this is likely to be more challenging. Zinc and Pb are numerically the elements present in the largest amounts in MSW-compost. Lead is the most limiting element to use of mechanically-segregated compost in domestic gardens, but concentrations are typically below risk-based thresholds that protect human health. Composted residuals derived from MSW and greenwaste have a high affinity for binding heavy metals. There is general consensus in the scientific literature that aerobic composting processes increase the complexation of heavy metals in organic waste residuals, and that metals are strongly bound to the compost matrix and organic matter, limiting their solubility and potential bioavailability in soil. Lead is the most strongly bound element and Ni the weakest, with Zn, Cu and Cd showing intermediate sorption characteristics. The strong metal sorption properties of compost produced from MSW or sewage sludge have important benefits for the remediation of metal contaminated industrial and urban soils. Compost and sewage sludge additions to agricultural and other soils, with background concentrations of heavy metals, raise the soil content and the availability of heavy metals for transfer into crop plants. The availability in soil depends on the nature of the chemical association between a metal with the organic residual and soil matrix, the pH value of the soil, the concentration of the element in the compost and the soil, and the ability of the plant to regulate the uptake of a particular element. There is no evidence of increased metal release into available forms as organic matter degrades in soil once compost applications have ceased. However, there is good experimental evidence demonstrating the reduced bioavailability and crop uptake of metals from composted biosolids compared to other types of sewage sludge. It may therefore be inferred that composting processes overall are likely to contribute to lowering the availability of metals in amended soil compared to other waste biostabilisation techniques. The total metal concentration in compost is important in controlling crop uptake of labile elements, like Zn and Cu, which increases with increasing total content of these elements in compost. Therefore, low metal materials, which include source-segregated and greenwaste composts, are likely to have inherently lower metal availabilities overall, at equivalent metal loading rates to soil, compared to composted residuals with larger metal contents. This is explained because the compost matrix modulates metal availability and materials low in metals have stronger sorption capacity compared to high metal composts. Zinc is the element in sewage sludge-treated agricultural soil identified as the main concern in relation to potential impacts on soil microbial activity and is also the most significant metal in compost with regard to soil fertility and microbial processes. However, with the exception of one study, there is no other tangible evidence demonstrating negative impacts of heavy metals applied to soil in compost on soil microbial processes and only positive effects of compost application on the microbial status and fertility of soil are reported. The negative impacts on soil microorganisms apparent in one long-term field experiment could be explained by the exceptionally high concentrations of Cd and other elements in the applied compost, and of Cd in the compost-amended soil, which are unrepresentative of current practice and compost quality. The metal contents of source-segregated MSW or greenwaste compost are smaller compared to mechanically-sorted MSW-compost and sewage sludge, and low metal materials also have the smallest potential metal availabilities. Composting processes also inherently reduce metal availability compared to other organic waste stabilisation methods. Therefore, risks to the environment, human health, crop quality and yield, and soil fertility, from heavy metals in source-segregated MSW or greenwaste-compost are minimal. Furthermore, composts produced from mechanically-segregated MSW generally contain fewer metals than sewage sludge used as an agricultural soil improver under controlled conditions. Consequently, the metal content of mechanically-segregated MSW-compost does not represent a barrier to end-use of the product. The application of appropriate preprocessing and refinement technologies is recommended to minimise the contamination of mechanically-segregated MSW-compost as far as practicable. In conclusion, the scientific evidence indicates that conservative, but pragmatic limits on heavy metals in compost may be set to encourage recycling of composted residuals and contaminant reduction measures, which at the same time, also protect the soil and environment from potentially negative impacts caused by long-term accumulation of heavy metals in soil.     

Fractionation studies and bioaccumulation of sediment-bound heavy metals in Kolleru lake by edible fish

Kolleru lake is the largest fresh water lake in the districts of East and West Godavari of Andhra Pradesh, India. Many anthropogenic sources contribute to the heavy metal pollution in the lake and the bioaccumulation of heavy metals in fish helps in assessing the aquatic pollution. Total contents and fractionation of selected heavy metals, viz., Zn, Cu, Cd, Pb, Cr, Ni and Co were measured in sediment sample and three edible fish. The investigation aimed at revealing differences in the accumulation pattern of heavy metals in fish inhabiting sediments characterized by varying metal bioavailability. The metal concentrations were found to be greater than the background concentrations of sediments indicating the anthropogenic origin of metals. Good recovery values were obtained for metal contents in sediments and fish. Large fractions of Zn, Cd and Cu were associated with mobile fraction of sediment and showed greater bioaccumulation in fish whereas Ni and Co were least mobilisable. The results clearly indicate that the fish of Kolleru lake are contaminated with metals and not advisable for human consumption.     

Effect of elemental sulphur on solubility of soil heavy metals and their uptake by maize

A pot experiment was conducted to study the influence of elemental sulphur (S) on solubility of soil Pb, Zn and Cd and uptake by maize (Zea mays L.). Two rates of elemental sulphur (S) applied at 0 (S0) and 200 (S200) mmol kg(-1) soil with three rates of each heavy metal at Pb, 0 (Pb0), 200 (Pb200), 400 (Pb400) mg kg(-1) soil, Zn, 0 (Zn0), 100 (Zn100), 200 (Zn200) mg kg(-1) soil and Cd, 0 (Cd0), 50 (Cd50), 100 (Cd100) mg kg(-1) soil, respectively. The result showed that with S application at 200 mmol S kg(-1), soil pH decreased about 0.3 unit and the solubility of the Zn and Cd was significantly increased, but the solubility of Pb had no significant influence. The concentration of Pb, Zn and Cd in maize shoots and roots were increased with increasing rates of heavy metals. However, the concentration of Zn and Cd in shoots and roots were higher with application of S rather than without S but no significant difference was found for Pb. The highest concentration of Zn in the shoots was 2.3 times higher with application of S rather than without at the same rate of Zn, 200 mg kg(-1). Plant biomass was also significantly affected by the application of S and of heavy metals. With heavy metal addition, the shoot and root biomass were decreased with the rates of those of heavy metals increased either with or without application of S. However, the shoot biomass was significantly decreased with S application at the same rate of heavy metals except that with Zn addition. The removal of Cd and Pb by maize uptake and accumulation with application of S had no significant increase compared to that without, but the removal Zn by maize uptake from the soil increased by application of S, 90.9 microg plant(-1) contrast to 25.7 microg plant(-1) at Zn200 within a growth period of only 40 days.     

Land use/land cover change and statistical modelling of cultivated land change drivers in Nigeria

Regional Environmental Change - In recent decades, human activities have significantly influenced land use/land cover. Identifying pattern changes in regional land use/land cover and their drivers...     

Distribution of 90Sr and 137Cs in Arctic soil profiles polluted by heavy metals

Effects of industrial pollution on the behaviour of radionuclides in spruce forest ecosystems were studied along a gradient from of a copper-nickel smelter in Monchegorsk, NW Russia. A reference site was situated in Lapland, Finland, 152 km west of Monchegorsk. Most of the total 137Cs activity in soil was in mineral (E and B) horizons, except at the reference site where the major part was still in the organic surface layer. Most of the total 90Sr activity still remaining in the soil profile was found in the surface layer, but the relative amount decreased with increasing level of industrial pollution. Pollutants from the smelter clearly affected the chemical speciation of radionuclides. Smaller amounts of exchangeable radionuclides were present in the organic surface layer at the most polluted sites. The decline of 137Cs with decreasing distance from the smelter correlated strongly with a similar depletion in exchangeable K and Mg. Total concentrations of 137Cs and 90Sr showed high correlations with exchangeable cations, particularly in the E and upper B horizon. A sudden change in behaviour of 137Cs in the lower B horizon may be associated with changes in clay mineralogy along the soil profile caused by weathering.     

Habitat function of agricultural soils as affected by heavy metals and polycyclic aromatic hydrocarbons contamination

Ecotoxic activity of soils polluted with polycyclic aromatic hydrocarbon (PAH) and heavy metals (HM) was evaluated in pot and laboratory experiments. Plants and soil microorganisms were chosen as test organisms and six different soil materials were used in the study. The applied levels of HM and PAH were aimed to reflect environmental conditions in the "worst case" situation. Zn(2+), Pb(2+) and Cd(2+) were introduced to the soils as an aqueous solution of the mixture of salts at the concentrations corresponding to 1000, 500 and 3 mg kg(-1), respectively. Mixture of four PAH compounds (flourene, anthracene, pyrene and chrysene) as a CH(2)Cl(2) solution was applied at levels of 10-100 mg summation operator 4PAH kg(-1). Population and activity of soil microflora was evaluated as measured of total bacteria counts, intensity of respiration and enzyme activity (dehydrogenases and phosphatases). Effect on plants was evaluated on the base of the growth (plant at an early stage of their development) and yield (mature plant) measurements. The results indicate that combined effect of PAH and heavy metals on soil microorganisms activity and on some plants at an early stage of their development can be stronger than in soils amended with HM or PAH separately. Reaction of tested organisms was related to soil properties, PAH concentration, time and plant species. Mature plants (maize) were insensitive to the applied levels of both group of contaminants.     

Plant communities in the zone of gas field development and heavy metal accumulation by them

Heavy metal accumulation by plant communities has been studied in different zones of impact of gas field development. The contents of heavy metals in different blocks of plant communities has proved to depend not only on the location of phytocenosis but also on its species composition. Communities dominated by species of the family Poaceae contain smaller amounts of heavy metals than those dominated by species of the family Asteraceae, especially of the genus Artemisia. The order of precedence in the accumulation of heavy metals in different blocks of plant communities has been revealed.     

Long-term environmental problems of radioactively contaminated land

This paper examines the various sources of radiological land contamination; its extent; its impacts on man, agriculture, and the environment; countermeasures for mitigating exposures; radiological standards; alternatives for achieving land decontamination and cleanup; and possible alternatives for utilizing the land. The major potential sources of extensive long-term land contamination with radionuclides, in order of decreasing extent, are nuclear war, detonation of a single nuclear weapon (e.g. terrorist act), serious reactor accidents, and nonfission nuclear weapons accidents that disperse the nuclear fuels (termed) “broken arrows”). Over the long term, external radiation doses are dominated primarily by ¹³⁷Cs and internal radiation doses primarily by ⁹⁰Sr. Plutonium and the transuranic elements are also important, primarily because of their long half-lives and relatively high inhalation doses. Costs for cleanup of contaminated land are very high. For example, cleanup of the broken arrow in Palomares, Spain, was approximately $33,600 per hectare. If cleanup of agricultural land is impractical, alternative land uses might include production of fiber crops, seed-stock crops, or plant biomass for alcohol fuels, or diversion of the land from crop production. Conversion of cropland to pasture or rangeland takes benefit from the generally lower accumulation of radionuclides into animals products compared with plant products. Another alternative is to fence off the land and use it for production of timber. This alternative would allow for 25–100 y or more of radiological decay before recovery of the timber.     

Dynamic evaluation of land productivity in China

For making rational and scientific land-use planning,an inventory indicator of land productivity subject to biophysical limitations and human disturbance is required.This study introduces agricultural land productivity(ALP)as the dynamic indicator to measure land productivity,involving factors that affect agricultural production,such as characteristics of climate,soil,and terrain.As a case study of this dynamic indicator,ALP was estimated at county level and aggregated into provincial level in the whole of China.The result shows that ALP increased during 2000-2010 in China,and the ratios of ALP to the actual grain yield were 65.40%and 66.38%in the years 2000 and 2005,respectively.The ALP is an effective dynamic indicator to estimate the land productivity and to represent the basic conditions about the supply of water,energy,nutrients,and the physical basis for plant growth,as well as the local input.ALP estimation could provide supporting information for policy-making about land production planning and land-use management.     

Dynamics of land use land cover and its impact on carbon stocks in Sub-Saharan Africa: an overview

Environment, Development and Sustainability - Land use land cover change (LULCC) is a global environmental trend that plays a key role in worldwide environmental change and sustainable development....