Ti0.7W0.3O2@BiVO4 p-n复合异质结构界面光催化剂的制备及其可见光催化降解苯酚机理的研究

设计并制备了新型Ti_0.7W_0.3O₂/BiVO₄ p-n复合异质结构界面光催化剂应用于可见光条件下降解模拟含苯酚污染物的废水.采用粉末X射线衍射(PXRD)、扫描电镜(SEM)、固体粉末紫外漫反射(DRS)及X射线光电子能谱(XPS)等技术表征了Ti_0.7W_0.3O₂/BiVO₄ p-n复合异质结构界面的性状.结果显示BiVO₄纳米粒子均匀地分布在Ti_0.7W_0.3O₂纳米颗粒周围并构筑了稳定的p-n复合异质结构界面.Ti_0.7W_0.3O₂/BiVO₄ p-n复合异质结构界面光催化剂具有更宽的可见光响应范围和更低的能带宽度.纯BiVO₄和Ti_0.7W_0.3O₂     

Synthesis of novel CeO2-BiVO4/FAC composites with enhanced visible-light photocatalytic properties

To utilize visible light more effectively in photocatalytic reactions, a fly ash cenosphere （FAC）-supported CeO2-BiV04 （CeO2-BiVO4/FAC） composite photocatalyst was prepared by modified metalorganic decomposition and impregnation methods. The physical and photophysical properties of the composite have been characterized by X-ray diffraction （XRD）, scanning electron microscope （SEM） and energy dispersive X-ray spectroscopy （EDX）, X-ray photoelectron spectroscopy （XPS）, and UV-Visible diffuse reflectance spectra. The XRD patterns exhibited characteristic diffraction peaks of both BiVO4 and Ce02 crystalline phases. The XPS results showed that Ce was present as both Ce4＋ and Ce3＋ oxidation states in Ce02 and dispersed on the surface of BiV04 to constitute a p-n heterojunction composite. The absorption threshold of the CeO2-BiVO4/FAC composite shifted to a longer wavelength in the UV-Vis absorption spectrum compared to the pure Ce02 and pure BiV04. The composites exhibited enhanced photocatalytic activity for Methylene Blue （MB） degradation under visible light irradiation. It was found that the 7.5 wt.% CeO2-BiVO4/FAC composite showed the highest photocatalytic activity for MB dye wastewater treatment.     

Triton X-100 induced cuboid-like BiVO4 microsphere with high photocatalytic performance

A highly active visible light-induced BiVO₄ photocatalyst was prepared by a simple co-precipitation method using ammonia solution as a pH adjustor and Triton X-100 (TX100) as a structure directing agent. The physical properties of the prepared BiVO₄ photocatalyst were investigated by several techniques such as X-ray diffractometer (XRD), Brunauer–Emmett–Teller (BET) surface area measurement, scanning electron microscopy (SEM), energy dispersive analysis (EDS), Fourier-transformed infrared spectroscopy (FT-IR), photoluminescence (PL), and UV–Vis diffused reflectance spectroscopy (DRS). XRD results revealed the existence of a monoclinic scheelite structure in both the unmodified and the modified samples. The TX100 played a crucial role to control the cuboid-like shape morphology of BiVO₄. The DRS results showed that the as-prepared cuboid BiVO₄ possessed enhanced visible light absorption range compared with that of the unmodified BiVO₄. The photocatalytic activity was evaluated via indigo carmine (IC) degradation under visible light irradiation. The modified BiVO₄ showed higher photocatalytic efficiency than the unmodified BiVO₄ and the commercial P25-TiO₂ which could be ascribed to the better charge separation efficiency.     

BiVO4表面氧缺陷调控及其光催化氧化三价砷

以乙二醇为溶剂,采用溶剂热-煅烧法制备缺陷型BiVO₄光催化剂,通过控制溶剂热反应时间调控BiVO₄表面氧缺陷以增强对As （III）的光催化氧化性能.同时,借助各种表征手段如XRD、SEM和XPS等分析样品的晶型结构、形貌特征及化学组成等性质,考察其在可见光下对As（III）的光催化氧化性能,并研究其氧化机理.结果表明,溶剂热反应时间对BiVO₄的晶粒尺寸和光吸收性能没有影响,但能通过影响比表面积调控BiVO₄的表面氧缺陷浓度.经优化得到,反应时间为14 h时制备的BiVO₄光催化剂（BiVO-14）对As（III）（6 mg·L^-1）的氧化效率高达95.7%,并具有良好的光催化稳定性.BiVO₄氧化As （III）的主要途径是光生空穴（h⁺）的直接氧化作用.表面氧缺陷能增强导电性能,促进电荷分离和迁移,强化h⁺的氧化作用,从而提高BiVO₄的光催化氧化性能.BiVO-14能有效促使As（III）转化为低毒的As（V）,在饮用水源As污染去除方面具有广阔应用前景.     

Ni2P/Bi2MoO6复合材料的制备及可见光催化活性

分别制备了花状Bi₂MoO₆和片状Ni₂P,采用研磨、水热及超声的方式将两种材料复合,考察了负载方式、负载率和溶液pH值对其可见光下降解亚甲基蓝（MB）的影响;利用XRD、XPS、FTIR、SEM、PL和UV-Vis等测试手段表征了样品的微观结构、形貌和光学性质;研究表明Ni₂P作为助催化剂,可加速电子空穴对分离,显著提高Bi₂MoO₆的光催化活性,其中当Ni₂P负载率为4%时,TOC去除率为64.28%,降解速率为纯Bi₂MoO₆的2倍,且将Ni₂P/Bi₂MoO₆复合催化剂循环利用3次后,同实验条件下降解率为94%,证明复合催化剂稳定性好.     

Mo-TiO2/AC光催化剂的制备及可见光降解L-酸的研究

采用溶胶-凝胶法制备了Mo⁶⁺掺杂TiO₂光催化剂,并将其负载于粒状活性炭上,以1-萘酚-5-磺酸(L-酸)为模型反应物,研究了对L-酸的光催化作用并讨论了不同光源以及负载次数对L-酸的去除率和溶液的总有机碳去除率的影响.结果表明, Mo⁶⁺掺杂扩大了TiO₂催化剂的光谱响应范围.负载于活性炭上的掺杂二氧化钛为锐钛矿相,粒径约为17.8　nm.负载次数增多,催化剂的活性下降.Mo⁶⁺的掺杂不影响负载催化剂的紫外光活性及对L-酸的吸附能力.100　mg·L^-1的L-酸溶液加0.4 g催化剂,在可见光下反应4 h,掺杂催化剂对L-酸和溶液总有机碳的去除率分别为57%和53%,而未掺杂的催化剂去除率分别为13%和10%.催化剂反复使用4次,催化活性没有变化.     

Ag-PANI/BiOI光催化剂湿法脱除气态单质汞

采用原位光还原和简易化学吸附法制备出新型的三元Ag负载聚苯胺/碘氧化铋（PANI/BiOI）系列光催化剂,在模拟烟气条件下考察了光催化剂的脱汞性能,研究了Ag负载量、反应温度和烟气成分等对脱汞活性的影响,采用N₂吸附-脱附、XRD、TEM、XPS、DRS等技术对光催化剂的物理化学属性进行表征.结果表明：添加PANI后,光催化剂的Hg⁰去除性能大幅提升.负载4wt%的Ag后,Ag（4%）PANI/Bi OI具有约98%的脱汞性能.无机阴离子NO₃^-、Cl^-和SO₄^2-对光催化剂脱汞性能的抑制作用较小,但CO₃^2-对光催化剂的活性抑制作用较大,脱汞效率明显下降至82%.与PANI/BiOI相比,Ag（4%）PANI/Bi OI的比表面积和总孔容增大,表明Ag纳米颗粒高度分散在PANI/Bi OI的表面.Ag-PANI/BiOI显示出较强的光吸收能力.Ag纳米颗粒的添加能显著增强PANI/Bi OI表面e^--h⁺对的有效分离.光催化剂高效脱汞的原因在于PANI、Bi OI之间良好的带隙匹配和Ag纳米颗粒的表面等离子体共振（SPR）效应.     

Fabrication of electrochemically-modified BiVO4-MoS2-Co3O4composite film for bisphenol A degradation

A new electrochemically-modified BiVO₄-MoS₂-Co₃O₄ (represented as E-BiVO₄-MoS₂-Co₃O₄) thin film electrode was successfully synthesized for environmental application. MoS₂ and Co₃O₄ were grown on the surface of BiVO₄ to obtain BiVO₄-MoS₂-Co₃O₄. E-BiVO₄-MoS₂-Co₃O₄ film was achieved by further electrochemical treatment of BiVO₄-MoS₂-Co₃O₄. The as-prepared E-BiVO₄-MoS₂-Co₃O₄ exhibited significantly enhanced photoelectrocatalytic activity. The photocurrent density of E-BiVO₄-MoS₂-Co₃O₄ thin film is 6.6 times that of BiVO₄ under visible light irradiation. The degradation efficiency of E-BiVO₄-MoS₂-Co₃O₄ for bisphenol A pollutant was 81.56% in photoelectrochemical process. The pseudo-first order reaction rate constant of E-BiVO₄-MoS₂-Co₃O₄ film is 3.22 times higher than that of BiVO₄. And its reaction rate constant in photoelectrocatalytic process is 14.5 times or 2 times that in photocatalytic or electrocatalytic process, respectively. The improved performance of E-BiVO₄-MoS₂-Co₃O₄ was attributed to the synergetic effects of the reduction of interfacial charge transfer resistance, the formation of oxygen vacancies and sub-stoichiometric metal oxides and higher separation efficiency of photogenerated electron-hole pairs. E-BiVO₄-MoS₂-Co₃O₄ is a promising composite material for pollutants removal.     

Visible light responsive N-F-codoped TiO2 photocatalysts for the degradation of 4-chlorophenol

Visible light responsive N-F-codoped TiO₂ photocatalysts exhibit a higher catalytic activity than N-doped TiO₂ for the degradation of 4-chlorophenol due to the synergistic effect of nonmetal elements.     

铋修饰BiOBr/g-C3N4异质结光催化剂合成及其可见光催化性能研究

以尿素为氮化碳（g-C₃N₄）合成的前驱体,柠檬酸（CA）作为还原剂,以一步溶剂热法制备铋修饰BiOBr/g-C₃N₄异质结型复合光催化剂（简称Bi/BiOBr/g-C₃N₄）.通过调控CA的投加量,实现了对Bi/BiOBr/g-C₃N₄可见光催化的可控制备,并以RhB为目标污染物研究其光催化活性.结果表明：1被还原在BiOBr表面上的Bi金属含量随还原剂CA投加量增加而增加,CA最佳投加量为2 mmol,Bi/BiOBr/g-C₃N₄的光生载流子的分离效率最高、禁带宽度最窄（2.43 eV）.而未采用CA改性的BiOBr/g-C₃N₄,其禁带宽度为2.8 eV.2投加CA能调控BiOBr形貌（如结晶度、尺寸大小以及晶粒平均厚度）,进而调控其光催化活性.当CA投加量为2 mmol时,BiOBr纳米微球大小适中,结晶度最高,晶粒平均厚度最小.3Bi修饰BiOBr/g-C₃N₄光催化剂对RhB的可见光降解率高达99.8%,其光催化降解速率达到0.097 k·min^-1,是BiOBr/g-C₃N₄光催化速率（0.026 k·min^-1）的3.73倍.4Bi/BiOBr/g-C₃N₄异质结光降解机理是：在Bi金属等离子体效应、BiOBr表面氧空缺与异质结的协同作用下,提高了Bi/BiOBr/g-C₃N₄异质结对可见光吸收能力和光生载流子的分离效率,从而实现对RhB的高效降解.     

Synthesis, characterization, and photocatalytic activity of porous La–N–co-doped TiO2 nanotubes for gaseous chlorobenzene oxidation

The photocatalytic oxidation of gaseous chlorobenzene(CB) by the 365 nm-induced photocatalyst La/N–Ti O2, synthesized via a sol–gel and hydrothermal method, was evaluated. Response surface methodology(RSM) was used to model and optimize the conditions for synthesis of the photocatalyst. The optimal photocatalyst was 1.2La/0.5N–Ti O2(0.5) and the effects of La/N on crystalline structure, particle morphology, surface element content, and other structural characteristics were investigated by XRD(X-ray diffraction), TEM(Transmission Electron Microscopy), FTIR(Fourier transform infrared spectroscopy), UV–vis(Ultraviolet–visible spectroscopy), and BET(Brunauer Emmett Teller). Greater surface area and smaller particle size were produced with the co-doped Ti O2 nanotubes than with reference Ti O2. The removal of CB was effective when performed using the synthesized photocatalyst,though it was less efficient at higher initial CB concentrations. Various modified Langmuir-Hinshelwood kinetic models involving the adsorption of chlorobenzene and water on different active sites were evaluated. Fitting results suggested that competitive adsorption caused by water molecules could not be neglected, especially for environments with high relative humidity. The reaction intermediates found after GC–MS(Gas chromatography–mass spectrometry) analysis indicated that most were soluble, low-toxicity, or both. The results demonstrated that the prepared photocatalyst had high activity for VOC(volatile organic compounds) conversion and may be used as a pretreatment prior to biopurification.     

CH3O·引发的溴酸盐还原机制探究

针对溴酸盐(BrO-3)污染,本研究以三聚氰胺为前驱体制备石墨相氮化碳(g-C3N4)为自由基诱导催化材料.通过XRD、TEM、UV/Vis-DRS对其物相组成和光催化性能进行表征发现,制备的层状g-C3N4有稳定片层结构及可见光响应的禁带宽度(~2.70 e V).可见光照射下,g-C3N4表面产生的光生载流子不能直接还原溴酸盐.然而,若有有机小分子(如甲醇)存在,光催化还原效率迅速增大.通过原位电子顺磁共振谱(EPR)及对材料表面的光电化学测试分析,我们探索了该体系的光催化还原Br O-3的机制.结果表明,g-C3N4带隙较窄其空穴氧化能力较弱,在光催化过程中空穴只能将甲醇分子转化为CH3O·自由基,因而甲醇分子的存在提升了光生载流子的分离效率,加剧了自由基的累积.该自由基具有较高的还原活性,可迅速将水相中的溴酸根还原至溴离子.     

TiO2/粉煤灰光催化降解双氯芬酸钠研究

以燃煤电厂外排的废弃物粉煤灰(CFA)为载体,采用混合泥浆法将TiO2负载在CFA的表面,得到一种新型的复合光催化剂TiO2/CFA.对TiO2/CFA进行了扫描电镜分析、X射线衍射分析和氮吸附测试,并以双氯芬酸钠的光催化降解为评价手段,研究了TiO2负载量对TiO2/CFA光催化性能及重复使用性能的影响.结果表明,TiO2负载量的增加有助于提高TiO2/CFA的光催化性能,但当TiO2负载量过高时,CFA上的TiO2在水处理过程中容易脱落,对TiO2/CFA光催化剂的重复使用性能不利.本研究中,最佳的TiO2负载量约为50%,循环使用6次,其光催化降解效率没有明显降低,双氯芬酸钠的降解率均可达70%以上.     

纳米酸性水钠锰矿去除亚甲基蓝的研究

酸性水钠锰矿是普遍存在于土壤与海洋、湖泊及河流沉积物中的一种氧化锰矿物,因其颗粒细小、比表面积大、负电荷量高、表面活性强,影响和决定着污染物的行为和归趋。采用回流法制备纳米酸性水钠锰矿,运用X射线衍射(XRD)与Rietveld粉末衍射峰形全谱拟合技术表征其晶体结构,并通过扫描电镜(SEM)和透射电镜表征(TEM)观察其晶体形貌。研究纳米酸性水钠锰矿对亚甲基蓝(Methylene Blue,MB)的去除作用,并讨论影响因素(p H值、矿物浓度、染料浓度和温度)对MB去除的影响。研究结果表明,降低反应p H值、升高锰氧化物浓度、降低染料浓度及升高反应温度都可以促进MB的去除。     

BiOCl-(NH4)3PW12O40复合光催化剂制备及其光催化降解污染物机制

光生电子和空穴的分离效率是影响光催化性能的重要因素.氯氧铋是典型的层状纳米光催化剂,却因光生电子和空穴的快速复合所表现出的低量子效率而受到使用限制.本文通过两步的水热法合成了BiOCl-(NH_4)_3PW_(12)O_(40)复合光催化剂.以甲基橙(MO)为模拟污染物进行光催化活性测试.结果表明,在氙灯模拟的太阳光照射下,Bi与W的原子比为1∶1时,其催化效果最佳.通过自由基猝灭实验对催化剂光降解MO的催化机制进行了研究,发现BiOCl是由空穴,羟基自由基和超氧自由基共同作用来对MO进行降解;而复合催化剂则主要以羟基自由基和超氧自由基为活性物种来降解MO.通过对反应前后的催化剂进行XPS分析,证明了磷钨酸铵可以接收BiOCl产生的光生电子.通过光电流测试,表明复合光催化剂的光生电子的转移和分离效率有了较大的提高,从而提高了光催化活性.     

Porous FeOx/BiVO4-δS0.08：Highly efficient photocatalysts for the degradation of Methylene Blue under visible-light illumination

Porous S-doped bismuth vanadate with an olive-like morphology and its supported iron oxide （y wt.% FeOx/BiVO4-δS0.08, y = 0.06, 0.76, and 1.40） photocatalysts were fabricated using the dodecylamine-assisted alcohol-hydrothermal and incipient wetness impregnation methods, respectively. It is shown that the y wt.% FeOx/BiVO4-δS0.08 photocatalysts contained a monoclinic scheetlite BiVO4 phase with a porous olive-like morphology, a surface area of 8.8-9.2 m^2/g, and a bandgap energy of 2.38-2.42 eV. There was co-presence of surface Bi^5＋, Bi^3＋, V^5＋, V^3＋, Fe^3＋, and Fe^2＋ species in y wt.% FeOx/BiVO4-δS0.08. The 1.40 wt.% FeOx/BiVO4-δS0.08 sample performed the best for Methylene Blue degradation under visible-light illumination. The photocatalytic mechanism was also discussed. We believe that the sulfur and FeOx co-doping, higher oxygen adspecies concentration, and lower baudgap energy were responsible for the excellent visible-light-driven catalytic activity of 1.40 wt.% FeOx/BiVO4-δS0.08.     

Surface modification of polypropylene non-woven fibers with TiO2 nanoparticles via layer-by-layer self assembly method: Preparation and photocatalytic activity

Polypropylene (PP) meltblown fibers were coated with titanium dioxide (TiO₂) nanoparticles using layer-by-layer (LbL) deposition technique. The fibers were first modified with 3 layers of poly(4-styrenesulfonic acid) (PSS) and poly(diallyl-dimethylammonium chloride) (PDADMAC) to improve the anchoring of the TiO₂ nanoparticle clusters. PDADMAC, which is positively charged, was then used as counter polyelectrolyte in tandem with anionic TiO₂ nanoparticles to construct TiO₂/PDADMAC bilayer in the LbL fashion. The number of deposited TiO₂/PDADMAC layers was varied from 1 to 7 bilayer, and could be used to adjust TiO₂ loading. The LbL technique showed higher TiO₂ loading efficiency than the impregnation approach. The modified fibers were tested for their photocatalytic activity against a model dye, Methylene Blue (MB). Results showed that the TiO₂ modified fibers exhibited excellent photocatalytic activity efficiency similar to that of TiO₂ powder dispersed in solution. The deposition of TiO₂ 3 bilayer on the PP substrate was sufficient to produce nanocomposite fibers that could bleach the MB solution in less than 4 hr. TiO₂-LbL constructions also preserved TiO₂ adhesion on substrate surface after 1 cycle of photocatalytic test. Successive photocatalytic test showed decline in MB reduction rate with loss of TiO₂ particles from the substrate outer surface. However, even in the third cycle, the TiO₂ modified fibers are still moderately effective as it could remove more than 95% of MB after 8 hr of treatment.     

Ag3PO4/g-C3N4复合光催化剂的制备及其可见光催化性能

采用简单的原位沉淀法合成了可见光驱动型光催化剂Ag₃PO₄/g-C₃N₄.利用X-射线衍射（XRD）、傅里叶红外光谱（FT-IR）、扫描电子显微镜（SEM）、X-射线能谱（XPS）以及紫外可见漫反射光谱（UV-Vis DRS）等表征手段对合成的样品进行了表征.与单一的Ag₃PO₄和g-C₃N₄相比,Ag₃PO₄/g-C₃N₄复合材料对左氧氟沙星表现出了更高的催化效率.根据能带分析和自由基捕获试验,提出了Ag₃PO₄/g-C₃N₄复合材料Z型异质结构的作用机制.     

BiOCl/SiO2/Fe3O4复合材料可见光催化去除水中亚甲基蓝

以FeCl_3·6H_2O、FeCl_2·4H_2O、(C_2H_5)_4SiO_4、Bi(NO_3)_3·5H_2O、KCl为主要原料,采用化学共沉淀法和水热法制备了BiOCl/SiO_2/Fe_3O_4光催化剂,并对其进行EDS、TEM、XRD、FT-IR、UV-Vis表征,最后通过亚甲基蓝降解实验,研究了催化剂在合成过程中pH及催化剂投加量对其光催化性能的影响.结果表明,在pH=6、催化剂初始投加量为0.5 g·L~(-1)时,对亚甲基蓝的可见光催化效果最佳,光照120 min后对10 mg·L~(-1)的亚甲基蓝溶液的脱色率达到93.2%.BiOCl/SiO_2/Fe_3O_4经过简单的无水乙醇和水洗后,可高效重复利用4次.综合表明,BiOCl/SiO_2/Fe_3O_4是一种在处理染料废水中具有应用前景的磁性光催化剂.     

Visible light driven mineralization of spiramycin over photostructured N-doped TiO2 on up conversion phosphors

A novel visible light-active photocatalyst formulation(NdT/OP) was obtained by supporting N-doped TiO_2(NdT) particles on up-conversion luminescent organic phosphors(OP). The photocatalytic activity of such catalysts was evaluated for the mineralization process of spiramycin in aqueous solution. The effect of NdT loading in the range 15–60 wt.% on bulk and surface characteristics of NdT/OP catalysts was investigated by several chemicophysical characterization techniques. The photocatalytic performance of NdT/OP catalysts in the removal of spyramicin from aqueous solution was assessed through photocatalytic tests under visible light irradiation. Total organic carbon(TOC) of aqueous solution,and CO and CO_2 gas concentrations evolved during the photodegradation were analyzed. A dramatic enhancement of photocatalytic activity of the photostructured visible active NdT/OP catalysts,compared to NdT catalyst,was observed. Only CO_2 was detected in gas-phase during visible light irradiation,proving that the photocatalytic process is effective in the mineralization of spiramycin,reaching very high values of TOC removal. The photocatalyst NdT/OP at 30 wt.% of NdT loading showed the highest photocatalytic activity(58%of TOC removed after 180 min irradiation against only 31% removal after 300 min of irradiation of NdT). We attribute this enhanced activity to the high effectiveness in the utilization of visible light through improved light harvesting and exploiting. OP particles act as "photoactive support",able to be excited by the external visible light irradiation,and reissue luminescence of wavelength suitable to promote NdT photomineralization activity.