Time-resolved leaching of cadmium and manganese from lignite and incinerator fly ash

Fly ashes from a lignite fired power plant and a municipal incinerator were leached for 3 hours using 0.1N HC1. Leachate was analyzed for Cd and Mn and plots of concentration versus time for these elements show Cd, a surface adsorbed element in the combustion process, to be rapidly removed from the ash particles in the initial four or five minutes of leaching. Manganese, a fly ash matrix element, is leached at a more constant rate as the ash praticles are dissolved. Total Cd and Mn concentrations in the incinerator fly ash are greater than total concentrations of these elements in the lignite fly ash.     

Extraction of heavy metals from MSW incinerator fly ash using saponins

An extraction process with saponins was evaluated for removing heavy metals from MSW (municipal solid waste) incinerator fly ashes. Two different fly ashes, A and B, were treated on a laboratory scale with three triterpene-glycoside type of saponins, M, Q, and T, in the pH range 4-9. The results were compared with those of the HCI and EDTA treatment. The treatment with saponins extracted 20-45% of Cr from the fly ashes. Saponins were also effective in extracting Cu from fly ash A attaining 50-60% extraction. Saponin T extracted 100% of Pb from fly ash A at pH around 4. The extraction of Zn with the saponin treatment was similar to that of the HCl treatment. Further, Cr, Cu, Pb, and Zn were fractionated by sequential extraction to investigate the effect of saponins on each fraction. Extraction behavior of other elements during the saponin treatment was also studied. The leaching test on the residues received after the saponin treatment showed that the fly ashes were successfully detoxified to meet the landfilling guideline.     

Bioavailability of 2,3,7,8-tetrachlorodibenzo-p-dioxin from municipal incinerator fly ash to freshwater fish

The bioavailability of 2,3,7,8-TCDD from municipal incinerator fly ash to freshwater fish was determined. It was observed that carp exposed to fly ash containing all 22 TCDD isomers, or the solvent extract of the fly ash, retain only 2,3,7,8-TCDD. Exposures with fly ash appears to follow a dose response relationship for bioconcentration, however, the bioavailability of 2,3,7,8-TCDD was not directly related to the level of 2,3,7,8-TCDD in fly ash for two fly ash samples studied.     

Adsorption and thermal reactions of 1,2,3,4-tetrachlorodibenzo-p-dioxin on fly ash from a municipal incinerator

Adsorption and thermal reactions of 1,2,3,4-tetrachlorodibenzo-p-dioxin (TCDD) on fly ash from a municipal incinerator were determined for temperatures between 100 to 300°C in air and in helium atmospheres. Results show 1,2,3,4-TCDD undergoes partial irreversable adsorption or decomposition in air at these temperatures. However, no decomposition products in air atmosphere were detected using gas chromatographic/mass spectrometric analysis of fly ash extracts and effluent.     

Chemical kinetic modelling of PCDD formation from chlorophenol catalysed by incinerator fly ash

A kinetic model is developed for PCDD formation from chlorophenol catalysed by incinerator fly ash. The key step in the model is a Langmuir-Hinshelwood type elementary step for the coupling of two adsorbed chlorophenol species to PCDD. Kinetic expression is derived which can relate PCDD formation rates with process variables including temperature, precursor concentration, fly ash loading and number of active sites in fly ash. Calculated PCDD formation rates based on this kinetic model are in good agreement with laboratory measurements reported in the literature. When the model is applied to industrial incinerator conditions, at maximum a PCDD yield of 10(-3) microg/N m3 is calculated.     

Effects of the basicity on the comelting conditions of municipal solid waste incinerator fly ash and sewage sludge ash

In this study, the effects of the basicity on the pouring point of the municipal solid waste incinerator fly ash-sewage sludge ash mixture is investigated. Four kinds of sewage sludge ash, which were collected from several primary and secondary sewage treatment plants and were produced by different processes and sludge conditioning alternatives, were used as modifiers. The results indicate that the pouring point of the mixture increased with increasing basicity, within the range of 0.65-1.90. The pouring point is affected by the contents of the mixtures (CaO, SiO2, Al2O3, and the flux). It is suggested that an increase in the CaO content tends to raise the pouring point, whereas an increase in the SiO2 and/or the Al2O3 contents cause as adverse reaction. The prediction equation, obtained by multilinear regression (significant level is 0.05), is as follows: pouring temperature = 1189.6 + 4.19 CaO - 0.96 SiO2 - 4.33 Al2O3 (R2 = 0.91). In general, the pouring point decreased when the basicity was < 1. The pouring point apparently increased when the basicity was > 1.2. The regression squares for the different basicities were between 0.84 and 0.91. From these relationships, we note that a basicity index of 5 gave the best R2 (0.91). From the results of this study, it can be concluded that the modification of the basicity of the fly ash by the addition of sewage sludge ash to lower the pouring point is feasible and leads to a more energy-efficient melting process. In addition, these synthetic slags have a good pozzolanic reactive activity.     

超临界水无害化共处理PVC和医疗垃圾焚烧飞灰的可行性探讨

采用超临界水氧化降解PVC同时无害化处理医疗垃圾焚烧飞灰,利用PVC脱氯形成的中间产物盐酸提取医疗垃圾焚烧飞灰中的重金属,达到飞灰无害化的目的。结果显示,超临界水可以将飞灰颗粒打碎,从而提高盐酸提取重金属的速率和效果,但是在超临界水中还存在重金属的固定过程,过长的反应时间和过高的反应温度都会降低重金属的提取效率。在提取过程中,Cu和Zn优先于Pb被盐酸浸出,而Pb被浸出后很容易被超临界水进一步固定。综合考虑重金属在超临界水中的变化特性,总结出超临界水处理飞灰和PVC的最佳条件为:PVC与飞灰质量比0.5:1,温度400℃,提取时间90 min。处理后的飞灰再次经过水洗后,其重金属浸出浓度低于USEPA规定的限制值。本研究为飞灰的无害化处理提供一条新的思路。     

Isomer dependent bioavailability of polychlorinated dibenzo-p-dioxins and dibenzofurans from municipal incinerator fly ash to carp

The isomer dependent bioavailability of PCDDs and PCDFs from municipal incinerator fly ash to freshwater fish was determined. It was observed that carp exposed to fly ash in a continuous flow exposure readily accumulated select isomers of PCDDs and PCDFs. A preference for greater retention of isomers substituted in the 2, 3, 7 and 8 positions was observed. The Bioavailability Index (ratio of contaminant level in fish to level in fly ash) decreased with increasing degree of chlorination.     

垃圾焚烧飞灰物理化学性质的实验研究

应用激光粒度粒形分析仪、灰熔融性测定仪、原子吸收光谱仪和XRD等仪器手段对国内2种垃圾焚烧飞灰的密度、颗粒特性、熔点、成分和晶相结构等物理化学性质进行了详细的研究。研究发现，2种灰样颗粒直径的数量积分分布非常接近，其中基本没有超过40 μm的颗粒。由于垃圾焚烧飞灰在化学成分上存在的差异导致了其熔点有很大的不同。此外，XRD结果显示不同来源的飞灰其晶相结构存在较大的差别，这可能与垃圾的来源和焚烧工艺以及烟气处理方法有关。实验结果为飞灰无害化低温烧结工艺的选择和运行参数的制定提供了依据。     

水泥对垃圾焚烧飞灰中重金属的固化研究

采用水泥固化法处理垃圾焚烧飞灰,研究了飞灰与水泥质量比、养护时间、添加剂和化学预处理对垃圾焚烧飞灰固化块中重金属Zn、Pb、Cu、Cd、Cr浸出的影响.结果表明,当飞灰与水泥质量比为3:4,养护时间为11d的条件下,以砂浆塑化剂为添加剂,固化块Pb、Cu、Cd和Cr的浸出浓度分别降低了72.4％、70.6％、60.0％...     

Study of PCDD/Fs distribution in fly ash,ash deposits,and bottom ash from a medical waste incinerator in China

Over the past decades in China, the number of medical waste incinerators (MWIs) has been rising rapidly, causing emissions of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). In this study, samples of fly ash, ash deposits, and bottom ash from typical MWIs were analyzed for PCDD/Fs and their distribution characteristics. Results showed international toxic equivalent (I-TEQ) values in the range of 6.9–67 ng I-TEQ/g in fly ash and ash deposits, whereas the concentration in bottom ash was extremely low (only 1.33 pg I-TEQ/g), yet the generation of PCDD/Fs was mostly de novo synthesis in fly ash and ash deposits according to the ratio of PCDFs to PCDDs; the major distribution differences of PCDD/Fs in fly ash was manifested by the content of toxic furan 2,3,7,8-TCDF, but other toxic PCDD/Fs showed similar distribution. Other findings are that 2,3,4,7,8-PeCDF had the most contribution to TEQ concentration, and that the most abundant toxic furan congener is 1,2,3,4,6,7,8-HpCDF. Correlation analysis showed that there was no significant correlation between PCDD/Fs concentration and several other physical and chemical parameters.

Implications: This paper is of interest because it presents the emission performances of PCDD/Fs in ash from medical waste incineration in China. PCDD/F contents in fly ash and ash deposits vary between 6.9 and 67.3 ng I-TEQ/g. However, the concentration in bottom ash was extremely low (only 1.33?×?10^?3 ng I-TEQ/g). The fingerprints of PCDD/Fs in fly ash are almost similar, except for 2,3,7,8-TCDF. There is no marked correlation between PCDD/Fs and other physicochemical properties.

Supplemental Materials: Supplemental materials are available for this paper. Go to the publisher's online edition of the Journal of the Air & Waste Management Association.     

Isomeric analysis of PCDD/PCDF in waste incinerator fly ash by GC-MS/MS

The development of an analytical method for the analysis of PCDD/PCDF in flyash using a bench analytical system comprising of a gas chromatograph fitted with an ion trap detector operated in the tandem MS mode is described. The optimum settings for the most important MS/MS parameters are given, including those for the less reported mono- to tri-chlorinated dioxin and furan congener groups. Flyash samples from three waste incineration plants representing a decommissioned 1970s plant design, an upgraded and still operating plant originally designed in the 1970s, and a modern 1990s design operating plant have been analysed for PCDD/PCDF. The flyash samples were analysed for PCDD/PCDF using the methods developed and the total PCDD/PCDF, I-TEQ values and isomeric profiles are reported. The flyash from the older decommissioned incinerator had very significantly higher concentrations of PCDD/PCDF compared to the modern incinerator flyash.     

不同方法处理飞灰对亚甲基蓝的吸附性能

为了研究不同方法处理飞灰对亚甲基蓝的吸附性能和吸附上清液中重金属的浸出毒性,分析了水洗、硫酸洗和醋酸洗飞灰及在吸附过程中投加NaOH和Na2CO3对亚甲基蓝的吸附效果的影响,以及吸附上清液中Pb和Cr的浸出情况。实验得出,不同方法处理飞灰对亚甲基蓝的脱色率均达70%以上,最高可达100%,通过水洗和酸洗,飞灰的稳定性显著提高,1%硫酸和5%醋酸洗飞灰吸附上清液中Pb和Cr的浸出量远远低于《危险废物鉴别标准浸出毒性鉴别》的限定值。飞灰经过稳定化处理,用以处理染料废水具有巨大潜能。     

用于粉煤灰排放的加湿卸灰设备

针对粉煤灰排放产生二次污染问题,经过分析比较,选用了科学的加湿排放工作原理,设计了用于粉煤灰排放的新型灰料加湿卸灰机。     

用于粉煤灰排放的加湿卸灰设备

针对粉煤灰排放产生二次污染问题，经过分析比较，选用了科学的加湿排放工作原理，设计了用于粉煤灰排放的新型灰料加湿卸灰机。     

垃圾焚烧厂焚烧底灰的处理研究

系统地研究了常州市环境卫生综合厂垃圾焚烧车间的底灰。研究结果表明，根据中国现行的污染控制标准，该厂的底灰属于一般废物，可以以建筑垃圾的方式处理。但对底灰的分选和分类研究结果表明，底灰含有一定量的未燃烬的有机废物，也有一些可回收利用的废物。因此，底灰应该先分选后，再对无利用价值的渣土作填埋或其他处置。     

Latent hydraulic reactivity of blended cement incorporating slag made from municipal solid waste incinerator fly ash

The reactivity of cement pastes made by blending Portland cement with slag from municipal solid waste incinerator (MSWI) fly ash was investigated to assess the potential of recycling MSWI fly ash slag. The slag, prepared by melting MSWI fly ash at 1400 degrees C for 30 min, was pulverized and ground, then blended with ordinary Portland cement (OPC), using various substitution levels to make slag-blended cement (SBC). The pozzolanic reactivity of the ecocement was then characterized by determining variations in the compressive strength, degree of hydration, microstructure, speciation, and mineralogical crystalline phases. The results suggest that the strength of the pastes at an early age decreased with increasing substitution levels, whereas the strength at a later age of the tested pastes (with substitution levels less than 10%) outperformed OPC paste because of typical SBC properties. The development of strength at a later age was also confirmed by X-ray diffraction and scanning electron microscopy techniques. This implies that active silica (Si) and alumina (Al) react with the hydration product, calcium hydroxide (Ca(OH)2), to form calcium silicate hydrate (C-S-H), which contributed to strength development at a later age by the filling up of pores in the SBC pastes. The pozzolanic activity of the SBC pastes indicates that it is suitable for use as a substitute for OPC in blended cement.     

Metals leachability from medical waste incinerator fly ash: A case study on particle size comparison

This paper presents the results from a study of metals leachability of medical waste incinerator fly ash in Japan on the basis of particle size. Sequential extraction and Toxicity Characteristic Leaching Procedure (TCLP) analysis were carried out in order to quantify the leaching amount of metals in each categorized particle size. Sequential extraction was also subjected to identify the preference of binding matrix of metals. The results of sequential extraction showed an increase both exchangeable and carbonate associated chromium concentrations in the bigger particle size fractions. Likewise, concentrations of carbonate matrix of arsenic and tin tended to increase in the bigger particle size fractions. In contrast, exchangeable associated cadmium as well as both exchangeable and carbonate matrices of barium were found higher in the smaller particle size fractions. However, no correlation was found in Kendal-tau correlation analysis between particle size of the ash and metals leachability of the TCLP.     

Arrested municipal solid waste incinerator fly ash as a source of heavy metals to the UK environment

Arrested fly ash samples from most currently operating municipal solid waste (MSW) incinerators in the UK have been analysed for a range of elements. Some of the more important heavy metals ranged in concentration as follows: Cd, 21-4646 (median = 271) mg kg(-1); Cu, 296-1307 (642) mg kg(-1); Cr, 44-1328 (574) mg kg(-1); Ni, 45-2204 (74) mg kg(-1); Pb, 447-9704 (4337) mg kg(-1); and Zn, 2285-13,500 (9232) mg kg(-1). These concentrations represent considerable enrichments relative to median UK soil concentrations. Enrichment ratios (defined as median fly ash: median UK soil) were as follows: Mn 1.6; Co 2.6; Ni 3.3; Ba 11; Sr 11; Cr 15; Cu 35; Pb 108; Zn 113; Cd 387. It is estimated that MSW incinerator ash contributes c. 15 t Cd and 241 t Pb to UK landfill sites per annum. These figures compare with previous studies by Hutton & Symon (Hutton, M. & Symon, C. (1986). The quantities of cadmium, lead, mercury and arsenic entering the UK environment from human activities. Sci. Total Environ., 57, 129-50.) which estimated that annual inputs to UK landfills from coal fly ash are c. 60 t Cd and 1270 t Pb. However, it is argued that metals associated with MSW ashes are potentially of greater environmental significance than in coal ashes, because they are much more available and present at much higher concentrations.     

Influence of coexisting surface-active agents on leachability of dioxins in raw and treated fly ash from an MSW incinerator

The leaching behavior of dioxins from raw and treated fly ash (FA) under the coexistence of several types of surface-active agents (SAAs) was examined by batch leaching tests to obtain significant information not only for evaluating leachability of dioxins as hydrophobic organic pollutants (HOPs) under the severe environment in which SAAs coexist, but also for evaluating the reduction efficiency of dioxin-leachability from the treated FA. Enhancement of dioxin-leachability by sufficient addition of SAAs was observed in the leaching test, whereas addition of a smaller quantity depressed the leachability. The higher the degree of chlorination in PCDDs/PCDFs homologues, the more effectively the SAAs enhanced the leachability. Moreover, there was a large difference in the potential for leachability enhancement due to each surface activity, based on critical micelle concentration (CMC) of the SAAs although Aldrich humic acid enhanced the leachability at a much lower concentration than CMC. A comparison of the leachability in FA treated by several methods showed a difference in the reduction efficiency of leachability, depending on the adsorption of SAAs by each treated FA.