BETR North America: a regionally segmented multimedia contaminant fate model for North America

We present the Berkeley-Trent North American contaminant fate model (BETR North America), a regionally segmented multimedia contaminant fate model based on the fugacity concept. The model is built on a framework that links contaminant fate models of individual regions, and is generally applicable to large, spatially heterogeneous areas. The North American environment is modeled as 24 ecological regions, within each region contaminant fate is described using a 7 compartment multimedia fugacity model including a vertically segmented atmosphere, freshwater, freshwater sediment, soil, coastal water and vegetation compartments. Inter-regional transport of contaminants in the atmosphere, freshwater and coastal water is described using a database of hydrological and meteorological data compiled with Geographical Information Systems (GIS) techniques. Steady-state and dynamic solutions to the 168 mass balance equations that make up the linked model for North America are discussed, and an illustrative case study of toxaphene transport from the southern United States to the Great Lakes Basin is presented. Regionally segmented models such as BETR North America can provide a critical link between evaluative models of long-range transport potential and contaminant concentrations observed in remote regions. The continent-scale mass balance calculated by the model provides a sound basis for evaluating long-range transport potential of organic pollutants, and formulation of continent-scale management and regulatory strategies for chemicals.     

Development of continental scale multimedia contaminant fate models: integrating GIS

The incentives and approaches for modelling chemical fate at a continental scale are discussed and reviewed. It is suggested that a multi-media model consisting of some 20-30 regions, each of which contains typically seven environmental compartments represents a reasonable compromise between the issues of the need for detailed resolution, avoidance of excessive data demands and inherent complexity and transparency. Strategies adopted in compiling the Berkley-Trent (BETR) model for North America are discussed and used to illustrate the issues of selecting appropriate number and nature of segments, treatment of air and water flows and the acquisition of environmental data. It is suggested that GIS software can play a valuable role in gathering and processing such data and in the display and interpretation of the results of the model assessment. The BETR model will be a useful tool for describing the nature of persistence and long-range transport of chemicals of concern in the North American environment.     

Evaluation and comparison of multimedia mass balance models of chemical fate: application of EUSES and ChemCAN to 68 chemicals in Japan

The European Union System for Evaluation of Substances (EUSES) and the ChemCAN chemical fate model are applied to describe the fate of 68 chemicals on two spatial scales in Japan. Emission information on the chemicals has been obtained from Japan's Pollutant Release and Transfer Registry and available monitoring data gathered from government reports. Environmental concentrations calculated by the two models for the four primary environmental media of air, water, soil and sediment agree within a factor of 3 for over 70% of the data, and within a factor of 10 for over 87% of the data. Reasons for certain large discrepancies are discussed. Concentrations calculated by the models are generally consistent with the lower range of concentrations that are observed in the environment. Agreement between modeled and observed concentrations is considerably improved by including an estimate of the advective input of chemicals in air from outside Japan. The agreement between the EUSES and ChemCAN models suggests that results of individual chemical assessments are not likely to be significantly affected by the choice of chemical fate model. Primary sources of discrepancy between modeled and observed concentrations are believed to be uncertainties in emission rates, degradation half-lives, and the lack of data on advective inflow of contaminants in air.     

Modelling the fate of persistent organic pollutants in Europe: parameterisation of a gridded distribution model

A regionally segmented multimedia fate model for the European continent is described together with an illustrative steady-state case study examining the fate of gamma-HCH (lindane) based on 1998 emission data. The study builds on the regionally segmented BETR North America model structure and describes the regional segmentation and parameterisation for Europe. The European continent is described by a 5 degrees x5 degrees grid, leading to 50 regions together with four perimetric boxes representing regions buffering the European environment. Each zone comprises seven compartments including; upper and lower atmosphere, soil, vegetation, fresh water and sediment and coastal water. Inter-regions flows of air and water are described, exploiting information originating from GIS databases and other georeferenced data. The model is primarily designed to describe the fate of Persistent Organic Pollutants (POPs) within the European environment by examining chemical partitioning and degradation in each region, and inter-region transport either under steady-state conditions or fully dynamically. A test case scenario is presented which examines the fate of estimated spatially resolved atmospheric emissions of lindane throughout Europe within the lower atmosphere and surface soil compartments. In accordance with the predominant wind direction in Europe, the model predicts high concentrations close to the major sources as well as towards Central and Northeast regions. Elevated soil concentrations in Scandinavian soils provide further evidence of the potential of increased scavenging by forests and subsequent accumulation by organic-rich terrestrial surfaces. Initial model predictions have revealed a factor of 5-10 underestimation of lindane concentrations in the atmosphere. This is explained by an underestimation of source strength and/or an underestimation of European background levels. The model presented can further be used to predict deposition fluxes and chemical inventories, and it can also be adapted to provide characteristic travel distances and overall environmental persistence, which can be compared with other long-range transport prediction methods.     

Development of a Dynamic Aquatic Model (DynA Model): Estimating Temporal Emissions of DDT to Lake Maggiore (N. Italy)

- DOI: http://dx.doi.org/10.1065/espr2006.01.009 Background, Aims and Scope Most existing models used to describe the fate of chemicals in surface water and sediment generally consider a 'static scenario', in which a contaminant is discharged at a constant rate and environmental input parameters do not change during the simulation time. This approach is not suitable in environmental scenarios characterized by daily or periodic changes of several input parameters. The aim of this study is to estimate approximate emissions of DDT lo Lake Maggiore using a new surface water model, (DynA Model) that describes the fate of a chemical in a dynamic scenario. Methods The model is developed on the grounds of an existing and validated model (QWASI). A numerical solution was adopted to build the fully dynamic version of the model. Results and Discussion The model was applied to Lake Maggiore emitting DDT at a constant rate until steady-state was reached. Emissions were stopped and later sporadic 'pulse' emissions were added. This was done to calculate the amount of DDT needed to simulate concentrations close to those measured in water and sediments. This allowed the evaluation of the order of magnitude of emissions. An uncertainty analysis for sediment resuspension was also performed, given the lack of measured resuspension rates. Conclusion The model showed the time response of the Lake Maggiore system to varying emission scenarios and provided what are regarded as reasonable estimates of DDT emissions. The model demonstrated the importance of sediment-water exchange. Recommendation and Outlook In order to better calculate DDT concentrations the model should be run with different discharge scenarios to clarify the time trends of concentrations, possibly with the use of different sets of measured data (such as biota and sediment deposition/resuspension rates).     

BETR-World: a geographically explicit model of chemical fate: application to transport of alpha-HCH to the Arctic

The Berkeley-Trent (BETR)-World model, a 25 compartment, geographically explicit fugacity-based model is described and applied to evaluate the transport of chemicals from temperate source regions to receptor regions (such as the Arctic). The model was parameterized using GIS and an array of digital data on weather, oceans, freshwater, vegetation and geo-political boundaries. This version of the BETR model framework includes modification of atmospheric degradation rates by seasonally variable hydroxyl radical concentrations and temperature. Degradation rates in all other compartments vary with seasonally changing temperature. Deposition to the deep ocean has been included as a loss mechanism. A case study was undertaken for alpha-HCH. Dynamic emission scenarios were estimated for each of the 25 regions. Predicted environmental concentrations showed good agreement with measured values for the northern regions in air, and fresh and oceanic water and with the results from a previous model of global chemical fate. Potential for long-range transport and deposition to the Arctic region was assessed using a Transfer Efficiency combined with estimated emissions. European regions and the Orient including China have a high potential to contribute alpha-HCH contamination in the Arctic due to high rates of emission in these regions despite low Transfer Efficiencies. Sensitivity analyses reveal that the performance and reliability of the model is strongly influenced by parameters controlling degradation rates.     

An object-oriented software for fate and exposure assessments

The model system CemoS¹ (Chemical Exposure Model System) was developed for the exposure prediction of hazardous chemicals released to the environment. Eight different models were implemented involving chemicals fate simulation in air, water, soil and plants after continuous or single emissions from point and diffuse sources. Scenario studies are supported by a substance and an environmental data base. All input data are checked on their plausibility. Substance and environmental process estimation functions facilitate generic model calculations. CemoS is implemented in a modular structure using object-oriented programming. e-mail: cemos@aphrodite.mathematik.uni-osnabrueck.de     

Evaluating the environmental fate of atrazine in France

Atrazine is used in large quantities in U.S. and European countries as a weed-control agent. As a result, numerous data on its environmental fate and hazards have been published. Analysis of the literature shows that this herbicide can be found with appreciable concentrations in groundwaters, rivers, lakes, and estuaries. This contamination principally results from leaching and runoff processes. Atrazine can also pollute fog and rain due to its release into the atmosphere through spray applications. This large amount of information constitutes a very attractive basis for assessing the simulation performances of environmental fate models. In this context, CHEMFRANCE, a regional fugacity model level III which calculates the environmental distribution of organic chemicals in twelve defined regions of France has been used to estimate the environmental fate of atrazine. The calculated values are comparable with field and laboratory results. Therefore, CHEMFRANCE can be considered as a useful tool for simulating the environmental fate of this agrochemical.     

An assessment of the environmental fate and exposure of benzene and the chlorobenzenes in Canada

Systematic modelling of the fate of benzene and the chlorobenzenes is presented which follows a four-stage process of chemical classification, quantifying discharge rates and environmental concentrations, evaluative assessment of fate and regional mass balance modelling has been carried out for the southern Ontario region. The EQC model was applied to determine the principal transport and transformation processes experienced by this group of chemicals, which vary considerably in volatility and hydrophobicity. Observed environmental concentrations are in satisfactory agreement with the predictions of the steady state Level III ChemCAN model of chemical fate. A multiple pathway human exposure model which estimates intake of contaminants by residents of southern Ontario has been developed and applied to these chemicals. A novel method of deducing maximum tolerable environmental concentrations is presented. Results suggest that benzene and 1,4-dichlorobenzene are present in the environment at levels sufficient to cause exposures near allowable daily intake (ADI) levels for the general population, but the other substances are present at levels which result in exposure ranging from 1/10 to 1/1000 of the ADI.     

Prediction of overall persistence and long-range transport potential with multimedia fate models: robustness and sensitivity of results

The hazard indicators persistence (P) and long-range transport potential (LRTP) are used in chemicals assessment to characterize chemicals with regard to the temporal and spatial extent of their environmental exposure. They are often calculated based on the results of multimedia fate models. The environmental and substance-specific input parameters of such models are subject to a range of methodological uncertainties and also influenced by natural variability. We employed probabilistic uncertainty analysis to quantify variance in P and LRTP predictions for chemicals with different partitioning and transport behavior. Variance found in the results is so large that it prevents a clear distinction between chemicals. Additionally, only small improvements are observed when evaluating the results relative to a benchmark chemical. This can be explained by the dominance of substance-specific parameters and the only small direct influence of environmental parameters on P and LRTP as model outcomes. The findings underline the importance of learning how environmental conditions cause variability in substance behavior for improved substance ranking and classification.     

Spatial variance in multimedia mass balance models: comparison of LOTOS-EUROS and SimpleBox for PCB-153

The aim of this study was to determine whether nested generic box models can be used to predict spatial variance. An inter-comparison study was performed for the nested box model SimpleBox, and the spatially resolved model LOTOS-EUROS, using PCB-153 emissions in Europe as an example. We compared the two models concerning (1) average environmental concentrations, (2) spatial concentration variances, (3) spatial concentration patterns (maps), and (4) agreement with measured concentrations for the air and soil compartments. In SimpleBox, the spatial concentration variances and patterns were calculated subsequently for each separate grid cell surrounded by a regional and a continental shell with homogeneous, averaged circumstances. Average European PCB-153 concentrations calculated by LOTOS-EUROS and SimpleBox for the period 1981-2000 agree well for the air and soil compartments. Moreover, the predicted concentrations of both models are in line with the measured PCB-153 concentrations in Europe during that period. For PCB-153, the prediction of spatial concentration variances with the nested multimedia fate model SimpleBox performs adequately in most cases, except for the lower concentration boundary in the air compartment. It is concluded that SimpleBox can be used to predict the spatial maximum and average concentrations of PCB-153 in the air and soil compartments. The proposed method has to be tested systematically for different types of compounds, emission scenarios, environmental compartments and spatial scales in order to allow conclusions about the general applicability of the method.     

Modeling transport and deposition of contaminants to ecosystems of concern: a case study for the Laurentian Great Lakes

Transfer efficiency (TE) is introduced as a model output that can be used to characterize the relative ability of chemicals to be transported in the environment and deposited to specific target ecosystems. We illustrate this concept by applying the Berkeley-Trent North American contaminant fate model (BETR North America) to identify organic chemicals with properties that result in efficient atmospheric transport and deposition to the Laurentian Great Lakes. By systematically applying the model to hypothetical organic chemicals that span a wide range of environmental partitioning properties, we identify combinations of properties that favor efficient transport and deposition to the Lakes. Five classes of chemicals are identified based on dominant transport and deposition pathways, and specific examples of chemicals in each class are identified and discussed. The role of vegetation in scavenging chemicals from the atmosphere is assessed, and found to have a negligible influence on transfer efficiency to the Great Lakes. Results indicate chemicals with octanol-water (K(ow)) and air-water (K(aw)) partition coefficients in the range of 10(5)-10(7) and 10(-4)-10(-1) combine efficient transport and deposition to the Great Lakes with potential for biaccumulation in the aquatic food web once they are deposited. A method of estimating the time scale for atmospheric transport and deposition process is suggested, and the effects of degrading reactions in the atmosphere and meteorological conditions on transport efficiency of different classes of chemicals are discussed. In total, this approach provides a method of identifying chemicals that are subject to long-range transport and deposition to specific target ecosystems as a result of their partitioning and persistence characteristics. Supported by an appropriate contaminant fate model, the approach can be applied to any target ecosystem of concern.     

Development of a black carbon-inclusive multi-media model: application for PAHs in Stockholm

A multi-media model was developed for predicting the fate of organic chemicals in the Greater Stockholm Area, Sweden, and applied to selected polycyclic aromatic hydrocarbons (PAHs). Although urban models have been previously developed, this model is novel in that it includes sorption to pyrogenically-derived particles, commonly termed "black carbon" (BC), within the model structure. To examine the influence of BC sorption on environmental fate of PAHs, two versions of the model were generated and run: one in which sorption to BC was included and one in which BC sorption was excluded. The inclusion of BC sorption did not cause any significant variations to air levels, but it did cause an average 20-30% increase in sediment concentrations related to increased sediment solids partitioning. The model also predicted reduced advective losses out of the model domain, as well as chemical potential to diffuse from sediments, whilst total chemical inventory increased. In all cases, the lighter PAHs were more affected by BC inclusion than their heavier counterparts. We advocate the addition of sorption to BC in future multi-media fate and exposure models, which as well as influencing fate will also alter (lower) chemical availability and, thus, wildlife exposure to hydrophobic chemicals. A quantification of the latter was derived with the help of the soot-inclusive model version, which estimated a lowering of dissolved water concentrations between five and >200 times for the different PAHs of this study.     

机动车污染排放模型研究综述

过去几十年,为了掌握机动车污染排放的规律和特征,向决策者提供科学有效的机动车污染控制措施,研究者们致力于研究机动车污染物排放的物化原理和影响机动车污染的主要因素,并据此建立多种尺度的机动车排放模型,以模拟城市区域或者街道的污染物排放.为了分析机动车的瞬态排放特征,目前的机动车排放模型研究正逐渐从宏观向微观发展,排放测试方法注重获取逐秒的排放数据,排放模型模拟的时间尺度和空间尺度逐步趋向微观.此外,机动车模型研究正趋向与交通模型进行耦合,从而揭示机动车在实际道路交通流中的排放特征.从机动车排放的主要影响因素、机动车排放测试、机动车排放因子模型及机动车排放清单等4个方面综述了国内外机动车排放研究现状和发展动向,对比并评价各种机动车排放模型方法的优缺点和适用范围,对我国的机动车排放模型发展方向进行了展望.     

Evaluating the environmental fate of lindane in France

Lindane, a highly persistent and lipophilic pesticide, is still used in large quantities. This chemical can be found with appreciable concentrations in biota, atmosphere, and in other environmental compartments in the adsorbed form. This information provided a basis for assessing the simulation performances of CHEMFRANCE, a regional level III fugacity model allowing to generate environmental behavior profile of organic chemicals in France. The comparison between the estimated environmental fate and field and laboratory observations suggests that this fugacity model can be used to determine the processes that control the environmental fate of lindane in France. CHEMFRANCE also provides accurate estimates of environmental compartment contaminations.     

Geographical scenario uncertainty in generic fate and exposure factors of toxic pollutants for life-cycle impact assessment

In environmental life-cycle assessments (LCA), fate and exposure factors account for the general fate and exposure properties of chemicals under generic environmental conditions by means of 'evaluative' multi-media fate and exposure box models. To assess the effect of using different generic environmental conditions, fate and exposure factors of chemicals emitted under typical conditions of (1).Western Europe, (2). Australia and (3). the United States of America were compared with the multi-media fate and exposure box model USES-LCA. Comparing the results of the three evaluative environments, it was found that the uncertainty in fate and exposure factors for ecosystems and humans due to choice of an evaluative environment, as represented by the ratio of the 97.5th and 50th percentile, is between a factor 2 and 10. Particularly, fate and exposure factors of emissions causing effects in fresh water ecosystems and effects on human health have relatively high uncertainty. This uncertainty is mainly caused by the continental difference in the average soil erosion rate, the dimensions of the fresh water and agricultural soil compartment, and the fraction of drinking water coming from ground water.