Material cycles in Asia: especially the recycling loop between Japan and China

In this article, we clarify the current status of Japanese exports and Chinese imports of secondary resources. A total of around 10 million metric tons (t) of secondary resources are exported annually from Japan to China, Hong Kong, and Korea. Hong Kong plays the role of a transshipment point, especially regarding the trade in plastic waste, and China imports much from the USA and Japan, often through Hong Kong. The secondary resources exported from Japan include both byproducts from manufacturing processes and end-of-life products or materials. The great demand in China, and the difference in prices between countries, drive this transboundary shipment, although Japan has enacted various recycling laws that were implicitly intended to promote domestic recycling. In China, the imported secondary resources are recycled, usually by means of primitive and low-cost hand labor. The greatest concern is whether there are still improper (illegal or polluting) recycling activities in China. International material cycles should prevent environmental pollution and ensure efficient resource utilization. To that end, the following measures are needed: cooperative control of the trade of secondary resources between countries, the alignment of domestic laws with the regulations in other countries based on the actual trade activities, and the realization of sound practices for global resources management.     

The consumption and recycling collection system of PET bottles: A case study of Beijing,China

After studying the recycling collection system of polyethylene terephthalate (PET) bottles worldwide, the authors conducted an intercept survey in Beijing. Two separate questionnaires were issued, one questionnaire to PET bottle consumers and one to PET bottle recyclers. In this study, consumers are defined as people that consume PET-bottled beverages in their daily life. Recyclers were defined as those involved in the collection and recycling of PET bottles. These include scavengers, itinerant waste buyers, small community waste-buying depots, medium/large redemption depots, and recycling companies. In total, 580 surveys were completed, including 461 by consumers and 119 by recyclers. The authors found that consumption of PET bottles in Beijing was nearly 100,000 tonnes in 2012. Age, occupation, gender, and education were identified as significant factors linked to PET-bottled beverage consumption, while income was not a significant factor. 90% Of post-consumed PET bottles were collected by informal collectors (i.e., scavengers and itinerant waste buyers). The survey also found that nearly all PET bottles were reprocessed by small factories that were not designed with pollution control equipment, which allows them to offer higher prices for waste recyclable bottles. As Beijing is trying to build a formal recycling collection system for recyclables, subsidies should be given to the formal recycling sector rather than being charged land use fees, and attention should also be given to informal recyclers that make their living from the collection of recyclables. Informal and formal sectors may work together by employing the scavengers and itinerant waste buyers for the formal sectors. In addition to the recycling of PET bottles, concern should also be allocated to reduce consumption, especially among young people, as they, compared to other groups, have a stronger demand for PET-bottled beverages and will be the main body of society.     

Recent trends in recycling activities and waste management in Japan

Japan's basic approach to municipal solid waste (MSW) is (1) waste reduction, (2) promotion of recycling, (3) volume reduction by intermediate treatment, and (4) environmentally sound final disposal. A brief history of legislative trends in waste management is given as background for current waste management and recycling activities. The material recovery rate for MSW collected by local municipalities was only 5.6% in 1996. More than half of MSW, on a volume basis, consists of containers and packages, while great amounts of landfill space are also taken up by bulky wastes such as electric appliances. Therefore, in order to promote recycling and decrease landfill waste, Japan is targeting containers, packages, and electric appliances. A law promoting separate collection and recycling of containers and packages (Packaging Waste Recycling Law) and a law requiring the recycling of specific home electric appliances into new products (Home Electric Appliance Recycling Law) were introduced in June 1995 and June 1998, respectively. These laws are in line with the OECD policy Extended Producer Responsibility (EPR). Received: September 16, 1998 / Accepted: March 10, 1999     

Environmental burdens in the management of end-of-life cathode ray tubes

We compared the environmental burdens in the management of end-of life cathode ray tubes (CRTs) within two frameworks according to the different technologies of the production of televisions/monitors. In the first case, CRT recycling is addressed to the recovery of the panel and funnel glass for the manufacturing of new CRT screens. In the second case, where flat screen technology has replaced that of CRT, the recycling is addressed to the recovery of the glass cullet and lead for other applications. The impacts were evaluated according to the problem-oriented methodology of the Institute of Environmental Sciences, Leiden University, Leiden, The Netherlands. Our data confirm that in both cases, the recycling treatment allows benefits to be gained for the environment through the recovery of the secondary raw materials. These benefits are higher for the “CRT technology” framework (1 kg CO₂ saved per CRT) than for the “flat screen technology” (0.9 kg CO₂ saved, per CRT, as the highest possible), mainly due to the high energy consumption for lead separation from the funnel glass. Furthermore, the recovery of yttrium from the fluorescent powders that are a residue of the recycling treatment would further improve the CO₂ credit for both the frameworks considered, which would provide a further saving of about 0.75 kg CO₂ per CRT, net of the energy and raw materials needed for the recovery.Overall, this study confirms that, even with a change in the destination of the recovered materials, the recycling processes provide a benefit for the environment: indeed the higher loads for the environment are balanced by avoiding the primary production of the recovered materials.     

Time-series product and substance flow analyses of end-of-life electrical and electronic equipment in China

Given the amounts of end-of-life electrical and electronic equipment (EoL-EEE) being generated and their contents of both harmful and valuable materials, the EoL-EEE issue should be regarded not only as an emerging environmental problem but also as a resource management strategy in China. At present, in order to provide the basis for managing EoL-EEE at both product and substance levels in China, it is necessary to carry out a quantitative analysis on EoL-EEE and to determine how much of it will be generated and how much materials and substances it contains. In this study, the possession and obsolescence amounts of five types of household appliance (HA) including television (TV) sets and the amounts of substances contained in EoL TV sets were estimated using time-series product flow analysis (PFA) and substance flow analysis (SFA). The results of PFA indicated that the total possession amounts of those five types of HAs will exceed 3.1 billion units in 2030, which will be two times higher than those in 2010. In addition, it was estimated that cumulatively over 4.8–5.1 billion units of these five types of EoL HA would be obsoleted between 2010–2030. The results of SFA on TV sets indicated that the generated amounts of most of the less common metals and a part of common metals such as copper (Cu) would tend to decrease, whereas those of other common metals such as iron (Fe) as well as precious metals would tend to increase in EoL TV sets in 2015–2030. The results of this study provide a quantitative basis for helping decision makers develop strategic policies for the management of EoL-EEE considering both environmental and resource aspects. Moreover, a calculation scheme of obsolete HAs presented in this study can be applied to estimate other types of EoL durable good. Meanwhile, the frameworks of this study will help not only the policy decision makers in the Chinese government but also those in developing countries that are facing similar problems.     

The contemporary copper cycle of Asia

A regional stock and flow model for an industrial metal was developed based on the substance-flow framework. Using this model, the contemporary copper cycle of the Asian region was constructed by aggregating country-level production and import and export data for different stages of the copper cycle. The reliability and availability of data were assessed both qualitatively and quantitatively. Asia as a region is a net importer of copper. There is a significant build-up of copper in use at a rate of nearly 3TgCu/year. The per capita generation of copper waste (0.4kgCu/(capita-year)) and the rate of secondary recovery of copper are low compared with Europe and North America. Japan's rates of use, waste generation, and recycling of copper are all much larger than the continental average. A tremendous potential exists in the region to utilize the copper content of the in-use reservoir, and subsequently to enhance copper recycling rates in the future. A set of metrics for the copper cycle is suggested in order to address sustainability issues related to resource policy and the environmental management of copper.     

循环经济发展中的物质代谢分析

介绍了循环经济发展过程中物质代谢系统边界的确定、代谢主体的认定、物质流的组成,分析了单位产值物质需求量、人均物质消耗强度和物质生产力等物质代谢效率的评价指标,探讨了物质代谢调控对象和手段,提出了当前循环经济理论研究应该从物质代谢入手,从产品的整个生命周期来研究经济系统与生态环境之间的物质流动规律,以形成闭合的物料循环系统。     

Anthropogenic metal cycles in China

The flows and stocks of seven important industrial metals were characterized for mainland China for several years in the dynamically changing decade of 1994–2004. One-year snapshot cycles are provided for chromium, nickel, and silver. For copper, zinc, lead, and iron, multiple-year cycles have been completed; they demonstrate that the flows of these metals into use in China doubled between 2000 and 2004. Although the Chinese per capita flows from production to disposal are mostly shown to be below the global average rate, they are increasing or are expected to increase dramatically. The metal resource efficiency is evaluated for several indicators of material flow analysis; these metrics for China are also below the global average values. The research quantitatively illustrates that China’s metal cycles may pose significant resource and environmental challenges in terms of their magnitudes and potential for growth.     

消耗臭氧层物质销毁技术探讨——以天津市废家电拆解企业为例

以天津市消耗臭氧层物质(ODS)销毁示范项目为背景,介绍了天津市废家电拆解企业涉及ODS的回收及处置情况,并参考国内外淘汰ODS处置经验,以含ODS的废冰箱泡棉为例,介绍了较为适用的焚烧处置技术,为后期大量淘汰的ODS物质处置工作提供了技术参考.     

E-waste assessment methodology and validation in India

An attempt has been made to establish an approach and a methodology to quantify electronic waste (e-waste) in India. The study was limited to personal computers (PCs) and televisions (TVs) within the state boundaries of Delhi and in selected areas in the National Capital Region (NCR). Material flow analysis was used to establish an e-waste trade value chain, where cathode ray tubes (CRTs) were tracked in the e-waste dismantling stream of the CRT regunning process. The market supply method was used to estimate the theoretical amount of e-waste for each item. Sensitivity analysis was carried out for PCs, using 5 years and 7 years as the average life, and for TVs, using 10 years and 12 years as the average life. Externalities such as e-waste entering the study area from outside were factored into the final e-waste analysis. Sensitivity analysis on the average life also factored in elements of active usage, reuse, and storage of electronic items and consumer behavior into assumptions about the obsolescence rate in market supply method. A primary survey indicated an output of 1800–2100 CRTs per day from all regunning units in the study area. This range validated the theoretical output for an average life of 7 years for a PC and 12 years for a TV. Using this approach, e-waste was estimated to reach 2 million units from the domestic market by 2010.     

Research on the recycling industry development model for typical exterior plastic components of end-of-life passenger vehicle based on the SWOT method

In-depth studies on the recycling of typical automotive exterior plastic parts are significant and beneficial for environmental protection, energy conservation, and sustainable development of China. In the current study, several methods were used to analyze the recycling industry model for typical exterior parts of passenger vehicles in China. The strengths, weaknesses, opportunities, and challenges of the current recycling industry for typical exterior parts of passenger vehicles were analyzed comprehensively based on the SWOT method. The internal factor evaluation matrix and external factor evaluation matrix were used to evaluate the internal and external factors of the recycling industry. The recycling industry was found to respond well to all the factors and it was found to face good developing opportunities. Then, the cross-link strategies analysis for the typical exterior parts of the passenger car industry of China was conducted based on the SWOT analysis strategies and established SWOT matrix. Finally, based on the aforementioned research, the recycling industry model led by automobile manufacturers was promoted.     

Emission inventory of deca-brominated diphenyl ether (DBDE) in Japan

Atmospheric emissions of deca-brominated diphenyl ether (DBDE) in Japan were estimated based on the material flow of DBDE products and their emission factors. In 2002, the demand for DBDE in Japan was 2200 ton/year and the stock level was about 60 000 ton. The DBDE flow into the waste stream was estimated to be about 6000 ton/year and the flow out through second-hand product exports was more than 700 ton/year. Home appliance recycling facilities dismantle and crush domestic wastes containing about 600 ton of DBDE annually. Material recycling of crushed plastics is not commonly practiced as yet. Emission factors from plastics processing (2 × 10⁻⁹–1 × 10⁻⁷), textile processing (9 × 10⁻⁷), home appliance recycling (8 × 10⁻⁹–5 × 10⁻⁶), and waste incineration (1 × 10⁻⁷–2 × 10⁻⁶) were estimated using field measurement data. The DBDE emission rate through house dust during the service life of final products (2 × 10⁻⁷–9 × 10⁻⁷ per year) was estimated using the DBDE concentration in dust and the amount of dust in used televisions. Emission factors from previous studies were also used. The estimated total DBDE emission was 170–1800 kg/year. These results suggest the necessity of characterizing emissions during the service life of products, which is essential information for formulating an appropriate e-waste recycling strategy.     

Importance of patient education on home medical care waste disposal in Japan

To determine current practices in the disposal and handling of home medical care (HMC) waste, a questionnaire was mailed to 1965 offices nationwide. Of the office that responded, 1283 offices were analyzed. Offices were classified by management configuration: those attached to hospitals were classified as ”attached offices” and others as “independent offices”. More nurses from attached offices recovered medical waste from patients’ homes than those from independent offices. Most nurses educated their patients on how to store HMC waste in their homes (79.3% of total) and on how to separate HMC waste (76.5% of total). On the other hand, only around half of nurses (47.3% from attached offices and 53.2% from independent offices) educated their patients on where to dispose of their HMC waste. 66.0% of offices replied that patients had separated their waste appropriately. The need for patient education has emerged in recent years, with education for nurses under the diverse conditions of HMC being a key factor in patient education.     

The contemporary cement cycle of the United States

A country-level stock and flow model for cement, an important construction material, was developed based on a material flow analysis framework. Using this model, the contemporary cement cycle of the United States was constructed by analyzing production, import, and export data for different stages of the cement cycle. The United States currently supplies approximately 80% of its cement consumption through domestic production and the rest is imported. The average annual net addition of in-use new cement stock over the period 2000–2004 was approximately 83 million metric tons and amounts to 2.3 tons per capita of concrete. Nonfuel carbon dioxide emissions (42 million metric tons per year) from the calcination phase of cement manufacture account for 62% of the total 68 million tons per year of cement production residues. The end-of-life cement discards are estimated to be 33 million metric tons per year, of which between 30% and 80% is recycled. A significant portion of the infrastructure in the United States is reaching the end of its useful life and will need to be replaced or rehabilitated; this could require far more cement than might be expected from economic forecasts of demand for cement.     

Fate of metals contained in waste electrical and electronic equipment in a municipal waste treatment process

In Japan, waste electrical and electronic equipment (WEEE) that is not covered by the recycling laws are treated as municipal solid waste. A part of common metals are recovered during the treatment; however, other metals are rarely recovered and their destinations are not clear. This study investigated the distribution ratios and substance flows of 55 metals contained in WEEE during municipal waste treatment using shredding and separation techniques at a Japanese municipal waste treatment plant. The results revealed that more than half of Cu and most of Al contained in WEEE end up in landfills or dissipate under the current municipal waste treatment system. Among the other metals contained in WEEE, at least 70% of the mass was distributed to the small-grain fraction through the shredding and separation and is to be landfilled. Most kinds of metals were concentrated several fold in the small-grain fraction through the process and therefore the small-grain fraction may be a next target for recovery of metals in terms of both metal content and amount. Separate collection and pre-sorting of small digital products can work as effective way for reducing precious metals and less common metals to be landfilled to some extent; however, much of the total masses of those metals would still end up in landfills and it is also important to consider how to recover and utilize metals contained in other WEEE such as audio/video equipment.     

The changing character of household waste in the Czech Republic between 1999 and 2009 as a function of home heating methods

The authors of this paper report on the changing character of household waste, in the Czech Republic between 1999 and 2009 in households differentiated by their heating methods. The data presented are the result of two projects, financed by the Czech Ministry of Environment, which were undertaken during this time period with the aim of focusing on the waste characterisation and complete analysis of the physicochemical properties of the household waste. In the Czech Republic, the composition of household waste varies significantly between different types of households based on the methods of home heating employed. For the purposes of these studies, the types of homes were divided into three categories – urban, mixed and rural. Some of the biggest differences were found in the quantities of certain subsample categories, especially fine residue (matter smaller than 20 mm), between urban households with central heating and rural households that primarily employ solid fuel such coal or wood. The use of these solid fuels increases the fraction of the finer categories because of the higher presence of ash. Heating values of the residual household waste from the three categories varied very significantly, ranging from 6.8 MJ/kg to 14.2 MJ/kg in 1999 and from 6.8 MJ/kg to 10.5 MJ/kg in 2009 depending on the type of household and season. The same factors affect moisture of residual household waste which varied from 23.2% to 33.3%. The chemical parameters also varied significantly, especially in the quantities of Tl, As, Cr, Zn, Fe and Mn, which were higher in rural households. Because knowledge about the properties of household waste, as well as its physicochemical characteristics, is very important not only for future waste management, but also for the prediction of the behaviour and influence of the waste on the environment as the country continues to streamline its legislation to the European Union’s solid waste mandates, the results of these studies were employed by the Czech Ministry of Environment to optimise the national waste management strategy.     

流动注射分光光度法测定废水中挥发酚

基于４－氨基安替比林显色原理,采用流动注射技术,建立了炼油废水中挥发酚的快速测定方法。分析速率为每小时４０个试样,线性范围为０．７５－２３．０ｍｇ／Ｌ。对１．５０ｍｇ／Ｌ苯酚标准溶液连续测定１０次,相对标准偏差为２．８％。对炼油废水样,本法测定结果与标准方法无显著性差异。     

流动注射分光光度法测定水中铝的含量

以桑色素作显色剂,采用流动注射分光光度法测定水中铝的含量。在桑色素质量浓度为0．8g／L、聚氧乙烯辛基苯基醚体积分数为1．0％、进样环体积为400μL、检测波长420nm的条件下,采用流动注射分光光度法对水中铝的含量进行测定,本方法的线性范围为2～300μg／L,检出限（信噪比为3）为0．124μg／L,相对标准偏差为2．9％,加标回收率为96．4％～101．8％。     

流动注射分光光度法测定水中痕量氟化物

研究并建立了测定水中痕量氟化物的氟试剂（ＡＬＣ）－流动注射分光光度法。将水样注入到水载流中,与ＡＬＣ－Ｌａ丙酮水溶液混合,在５０℃时反应生成蓝色三元络合物,在分光光度计上于波长６１８ｍｍ处进行检测。Ｆ＾－测定的线性范围为０．０４－３．０ｍｇ／Ｌ,检出限为０．０３６ｍｇ／Ｌ。