Comparison of carbon capture and storage with renewable energy technologies regarding structural,economic, and ecological aspects in Germany

For the option of “carbon capture and storage”, an integrated assessment in the form of a life cycle analysis and a cost assessment combined with a systematic comparison with renewable energies regarding future conditions in the power plant market for the situation in Germany is done.The calculations along the whole process chain show that CCS technologies emit per kWh more than generally assumed in clean-coal concepts (total CO₂ reduction by 72–90% and total greenhouse gas reduction by 65–79%) and considerable more if compared with renewable electricity. Nevertheless, CCS could lead to a significant absolute reduction of GHG-emissions within the electricity supply system.Furthermore, depending on the growth rates and the market development, renewables could develop faster and could be in the long term cheaper than CCS based plants.Especially, in Germany, CCS as a climate protection option is phasing a specific problem as a huge amount of fossil power plant has to be substituted in the next 15 years where CCS technologies might be not yet available. For a considerable contribution of CCS to climate protection, the energy structure in Germany requires the integration of capture ready plants into the current renewal programs. If CCS retrofit technologies could be applied at least from 2020, this would strongly decrease the expected CO₂ emissions and would give a chance to reach the climate protection goal of minus 80% including the renewed fossil-fired power plants.     

Panel heterogeneous distribution analysis of trade and modernized agriculture on CO2 emissions: The role of renewable and fossil fuel energy consumption

In line with the global target of reducing climate change and its impact, this study explored the causal relationship between CO₂ emissions, modernized agriculture, trade openness, aggregate and disaggregate energy consumption in 14 African countries from 1990–2013 using a panel quantile estimation procedure. The empirical results showed that value addition to agricultural commodities declines CO₂ emissions in countries with high pollution levels. The study revealed a positive nexus between CO₂ emissions and energy consumption homogeneously distributed across quantiles. Trade openness was found to lower CO₂ emissions in countries with lower and higher levels of environmental pollution. While fossil fuel energy consumption was found to exacerbate CO₂ emissions, renewable energy consumption confirmed its mitigating effect on environmental pollution. The institution of climate‐smart agricultural options will sustainably increase productivity and income while adapting to climate change by reducing greenhouse gas emissions. Diversification of energy technologies with clean and modern energy sources like renewables avoid the over‐dependence on fossil fuels for agricultural purposes. Trade policies can stimulate flows of technology and investment opportunities for specialization in production and economies of scale. Hence, the consideration of policies that boost agricultural sector productivity and create an efficient market for international trade in Africa will help in improving livelihoods.     

The impact of electric passenger transport technology under an economy-wide climate policy in the United States: Carbon dioxide emissions,coal use,and carbon dioxide capture and storage

Plug-in hybrid electric vehicles (PHEVs) have the potential to be an economic means of reducing direct (or tailpipe) carbon dioxide (CO₂) emissions from the transportation sector. However, without a climate policy that places a limit on CO₂ emissions from the electric generation sector, the net impact of widespread deployment of PHEVs on overall U.S. CO₂ emissions is not as clear. A comprehensive analysis must consider jointly the transportation and electricity sectors, along with feedbacks to the rest of the energy system. In this paper, we use the Pacific Northwest National Laboratory's MiniCAM model to perform an integrated economic analysis of the penetration of PHEVs and the resulting impact on total U.S. CO₂ emissions. In MiniCAM, the deployment of PHEVs (or any technology) is determined based on its relative economics compared to all other methods of providing fuels and energy carriers to serve passenger transportation demands. Under the assumptions used in this analysis where PHEVs obtain 50–60% of the market for passenger automobiles and light-duty trucks, the ability to deploy PHEVs under the two climate policies modelled here results in over 400 million tons (MT) CO₂ per year of additional cost-effective emissions reductions from the U.S. economy by 2050. In addition to investments in nuclear and renewables, one of the key technology options for mitigating emissions in the electric sector is CO₂ capture and storage (CCS). The additional demand for geologic CO₂ storage created by the introduction of the PHEVs is relatively modest: approximately equal to the cumulative geologic CO₂ storage demanded by two to three large 1000 megawatt (MW) coal-fired power plants using CCS over a 50-year period. The introduction of PHEVs into the U.S. transportation sector, coupled with climate policies such as those examined here, could also reduce U.S. demand for oil by 20–30% by 2050 compared to today's levels.     

Alternative energy balances for Bulgaria to mitigate climate change

Alternative energy balances aimed to mitigate greenhouse gas (GHG) emissions are developed as alternatives to the baseline energy balance. The section of mitigation options is based on the results of the GHG emission inventory for the 1987–1992 period. The energy sector is the main contributor to the total CO₂ emissions of Bulgaria. Stationary combustion for heat and electricity production as well as direct end-use combustion amounts to 80% of the total emissions. The parts of the energy network that could have the biggest influence on GHG emission reduction are identified. The potential effects of the following mitigation measures are discussed: rehabilitation of the combustion facilities currently in operation; repowering to natural gas; reduction of losses in thermal and electrical transmission and distribution networks; penetration of new combustion technologies; tariff structure improvement; renewable sources for electricity and heat production; wasteheat utilization; and supply of households with natural gas to substitute for electricity in space heating and cooking. The total available and the achievable potentials are estimated and the implementation barriers are discussed.

     

The environmental life cycle assessment of agricultural sector in Thailand: EIO‐LCA approach

Agriculture is one of the major sectors in Thailand, with more than half of the population employed in agriculture‐related occupations. This study evaluated energy consumption and greenhouse gas (GHG) emissions of the Thai agricultural sector by applying the economic input–output life cycle assessment (EIO‐LCA) approach. The model evaluates the entire agricultural sector supply chain. Based on one million Thai baht (approximately $27,800 U.S. dollars) final demand of the rice paddy sector, the carbon dioxide (CO₂) emissions from the electricity sector are responsible for 27% (1,246 kilograms [kg] CO₂) of the total CO₂ emissions, whereas the emissions from paddy activities associated with the fertilizers and pesticides sector account for 16% (760 kg CO₂) and 11% (513 kg CO₂), respectively. The top three largest GHG emissions from the total agricultural sector supply chain are associated with the oil palm, the coffee and tea, and the fruit sectors. The government should promote and encourage sustainable agriculture by reducing the use of fertilizers and pesticides and by utilizing energy‐saving technologies.     

A disaggregated emissions inventory for Taiwan with uses in hybrid input‐output life cycle analysis (IO‐LCA)

This paper reports on a life‐cycle analysis (LCA) of Taiwan's “agriculture and forestry”, “crude petroleum, coal and natural gas extraction” and “electricity generation” sectors, revealing for the first time Taiwan's CO₂ and CH₄ emissions inventories and matching Taiwan's input‐output sectors. Integrated hybrid input‐output life cycle analysis is used to disaggregate the electricity generation sector into nuclear, hydro, gas, oil and coal, and cogeneration. Results show that the fossil‐fuel‐related electricity sub‐sectors have higher CO₂ emissions intensity than the remaining sectors in the economy and that the “paddy rice” sector is Taiwan's most CH₄‐intensive sector, making rice cultivation an important source of CH₄ emissions. This work is vital to sound policy decisions concerning power generation, coal, and agriculture and forestry at the national level.     

A multi-period optimization model for energy planning with CO2 emission consideration

A novel deterministic multi-period mixed-integer linear programming (MILP) model for the power generation planning of electric systems is described and evaluated in this paper. The model is developed with the objective of determining the optimal mix of energy supply sources and pollutant mitigation options that meet a specified electricity demand and CO₂ emission targets at minimum cost. Several time-dependent parameters are included in the model formulation; they include forecasted energy demand, fuel price variability, construction lead time, conservation initiatives, and increase in fixed operational and maintenance costs over time. The developed model is applied to two case studies. The objective of the case studies is to examine the economical, structural, and environmental effects that would result if the electricity sector was required to reduce its CO₂ emissions to a specified limit.     

Grey relation analysis of carbon dioxide emissions from industrial production and energy uses in Taiwan

This study aims to identify key factors affecting energy-induced CO₂emission changes from 34 industries in Taiwan, in order to have an integrated understanding of the industrial environmental-economic-energy performance and to provide insights for relevant policy making in Taiwan. Grey relation analysis was used in this paper to analyse how energy-induced CO₂emissions from 34 industries in Taiwan are affected by the factors: production, total energy consumption, coal, oil, gas and electricity uses. The methodology was modified by taking account of the evolutionary direction among relevant factors. Furthermore, tests of sensitivity and stability, which are seldom discussed in most grey relation analyses, were conducted to ensure the reliability of outcomes. We found that values ranging from 0·3 to 0·5 are appropriate, and the analytical results with value of 0·5 offer moderate distinguishing effects and good stability. Results indicate that industrial production has the closest relationship with aggregate CO₂emission changes; electricity consumption the second in importance. It reveals that the economy in Taiwan relied heavily on CO₂intensive industries, and that electricity consumption had become more important for economic growth. The relational order of fuels is electricity, coal, oil then gas, accordant with their CO₂emission coefficients in Taiwan. The positive relational grade of aggregate production implies that the aggregate industrial CO₂intensity tended to decline. The total energy consumption had a smaller and negative relational grade with CO₂emissions, and implies an improvement on aggregate energy intensity, while the CO₂emission coefficient increased. For industries with significant influence on CO₂emissions, the total energy consumption had the largest relational grades. It is important to reduce the energy intensity of these industries. Nevertheless, it is also critical to decouple energy consumption and production to reduce the impacts of CO₂mitigation on economic growth.     

Desorption of CO2 from activated carbon fibre–phenolic resin composite by electrothermal effect

CO₂ capture by electrothermal swing adsorption is considered superior over conventional adsorption approaches: temperature swing adsorption and pressure swing adsorption. In this work, the effects of electricity, preheating and flow rate were studied. An increase in energy input by electricity has been found able to improve desorption performance more significantly than an increase in current level. However, higher current level is recommended because it can minimise energy loss while passing electricity. Higher flow rate can also be beneficial due to the improved desorption rate and reduced desorption time. However, there is a drop in CO₂ concentration in the effluent gas. When desorption takes place at a high current level, preheating is not required as it extends desorption duration with no obvious improvement in desorption rate. CO₂ capture by electrothermal swing adsorption has also been tested with different concentrations of CO₂. It is found that electrothermal swing adsorption can be more energy efficient while dealing with higher concentration CO₂.     

Processing of Straw/Corn Stover: Comparison of Life Cycle Emissions

The LCA emissions from four renewable energy routes that convert straw/corn stover into usable energy are examined. The conversion options studied are ethanol by fermentation, syndiesel by oxygen gasification followed by Fischer Tropsch synthesis, and electricity by either direct combustion or biomass integrated gasification and combined cycle (BIGCC). The greenhouse gas (GHG) emissions of these four options are evaluated, drawing on a range of studies, and compared to the conventional technology they would replace in a western North American setting. The net avoided GHG emissions for the four energy conversion processes calculated relative to a “business as usual” case are 830 g CO₂e/kWh for direct combustion, 839 g CO₂e/kWh for BIGCC, 2,060 g CO₂e/L for ethanol production, and 2,440 g CO₂e/L for FT synthesis of syndiesel. The largest impact on avoided emissions arises from substitution of biomass for fossil fuel. Relative to this, the impact of emissions from processing of fossil fuel, e.g., refining of oil to produce gasoline or diesel, and processing of biomass to produce electricity or transportation fuels, is minor.     

Evaluation of different CHP options for refinery integration in the context of a low carbon future

This study presents a comparison of different concepts for delivering combined heat and power (CHP) to a refinery in Norway. A reference case of producing high pressure steam from natural gas in boilers and electricity in a combined cycle power plant, is compared to a: (1) natural gas fueled CHP without any CO₂ capture; (2) hydrogen fueled CHP with hydrogen produced from steam methane reforming (SMR); (3) hydrogen fueled CHP with hydrogen produced from autothermal reforming (ATR); and finally (4) natural gas fueled CHP with postcombustion CO₂ removal. The options are compared on the basis of first law efficiency, emissions of CO₂ and a simplified cash flow evaluation. Results show that in terms of efficiency the standard natural gas fueled CHP performs better than the reference case as well as the options with carbon capture. The low carbon options in turn offer lower emissions of greenhouse gases while maintaining the same efficiency as the reference case. The cash flow analysis shows that for any option, a certain mix of prices is required to produce a positive cash flow. As expected, the relationship between natural gas price and electricity price affects all options. Also the value of heat and CO₂ emissions plays an important role.     

Toward a CO2 zero emissions energy system in the Middle East region

Climate change and energy security are global challenges requiring concerted attention and action by all of the world’s countries. Under these conditions, energy supplier and exporter countries in the Middle East region are experiencing further challenges, such as increasing domestic energy demand while energy exports have to concurrently be kept at high levels. Middle East countries process the largest proven oil and gas reserves in the world and contribute a large fraction of the world’s CO₂ emissions from the use of these as fuels both domestically and internationally. This paper addresses different policies that could dramatically change the future course of the Middle East region toward a zero CO₂ emission energy system. To this aim, an integrated energy supply–demand model has been developed to analyze required commitments including renewable energy and energy efficiency targets and the potential of nuclear power, all of which should need to be considered in order to reduce CO₂ emissions by 2100. The results indicate that nearly 43% of the global energy of the Middle East region can be supplied from non-fossil fuel resources in 2100.     

A model for the CO2 capture potential

Global warming is a result of increasing anthropogenic CO₂ emissions, and the consequences will be dramatic climate changes if no action is taken. One of the main global challenges in the years to come is therefore to reduce the CO₂ emissions.Increasing energy efficiency and a transition to renewable energy as the major energy source can reduce CO₂ emissions, but such measures can only lead to significant emission reductions in the long-term. Carbon capture and storage (CCS) is a promising technological option for reducing CO₂ emissions on a shorter time scale.A model to calculate the CO₂ capture potential has been developed, and it is estimated that 25 billion tonnes CO₂ can be captured and stored within the EU by 2050. Globally, 236 billion tonnes CO₂ can be captured and stored by 2050. The calculations indicate that wide implementation of CCS can reduce CO₂ emissions by 54% in the EU and 33% globally in 2050 compared to emission levels today.Such a reduction in emissions is not sufficient to stabilize the climate. Therefore, the strategy to achieve the necessary CO₂ emissions reductions must be a combination of (1) increasing energy efficiency, (2) switching from fossil fuel to renewable energy sources, and (3) wide implementation of CCS.     

Feasibility of storing CO2 in the Utsira formation as part of a long term Dutch CCS strategy: An evaluation based on a GIS/MARKAL toolbox

This study provides insight into the feasibility of a CO₂ trunkline from the Netherlands to the Utsira formation in the Norwegian part of the North Sea, which is a large geological storage reservoir for CO₂. The feasibility is investigated in competition with CO₂ storage in onshore and near-offshore sinks in the Netherlands. Least-cost modelling with a MARKAL model in combination with ArcGIS was used to assess the cost-effectiveness of the trunkline as part of a Dutch greenhouse gas emission reduction strategy for the Dutch electricity sector and CO₂ intensive industry. The results show that under the condition that a CO₂ permit price increases from €25 per tCO₂ in 2010 to €60 per tCO₂ in 2030, and remains at this level up to 2050, CO₂ emissions in the Netherlands could reduce with 67% in 2050 compared to 1990, and investment in the Utsira trunkline may be cost-effective from 2020–2030 provided that Belgian and German CO₂ is transported and stored via the Netherlands as well. In this case, by 2050 more than 2.1 GtCO₂ would have been transported from the Netherlands to the Utsira formation. However, if the Utsira trunkline is not used for transportation of CO₂ from Belgium and Germany, it may become cost-effective 10 years later, and less than 1.3 GtCO₂ from the Netherlands would have been stored in the Utsira formation by 2050. On the short term, CO₂ storage in Dutch fields appears more cost-effective than in the Utsira formation, but as yet there are major uncertainties related to the timing and effective exploitation of the Dutch offshore storage opportunities.     

Co-production of hydrogen and electricity with CO2 capture

Electricity and hydrogen can be used as energy carriers to reduce emissions of CO₂ from small and mobile energy users. One of the most promising technologies for the production of electricity and hydrogen with low CO₂ emissions is coal gasification with CO₂ capture and storage. Performance and cost data are presented for plants which produce electricity and hydrogen alone and plants which co-produce both of these energy carriers. The co-production plants include plants which produce a fixed ratio of hydrogen to electricity and plants which are able to vary the ratio while continuing to operate the gasification and CO₂ capture parts of the plant at full load. The paper also assesses the ability of these types of plants to satisfy the varying demands for hydrogen and electricity in future energy supply systems. The lowest cost option for the scenarios assessed in the paper is the use of flexible co-production plants with underground buffer storage of hydrogen.     

Gas conditioning—The interface between CO2 capture and transport

Gas conditioning is commonly referred to as the required processing for a produced natural gas to achieve transport and sales specifications. In this paper, gas conditioning as the processing required in the interface between CO₂ capture and transport is studied for nine different natural gas fired power plant concepts and three different CO₂ transport processes. Conditioning processes for both pipeline and ship transport are described and an enhanced process for volatile removal is developed. The energy requirement for the conditioning processes is normally between 90 and 120 kWh/tonne CO₂; however, this depends on the pressure and composition of the captured CO₂-rich stream. The loss of CO₂ in the water purge is small for most capture processes. The waste streams from the gas conditioning processes can contain large amounts of CO₂ and should therefore be further processed or reintroduced at an appropriate point upstream in the capture or gas conditioning process if possible. The integration benefit may vary depending on the composition of the CO₂-rich stream. It could be particularly interesting for processes with “innovative reactors” (membranes, sorbents, chemical looping) to integrate CO₂ capture and gas conditioning.     

Nexus between renewable energy consumption,economic growth,and CO2 emissions in Algeria: New evidence from the Fourier-Bootstrap ARDL approach

Governments often impose new energy strategies to support new CO₂ emission-reducing technologies without affecting economic growth. Hence, this study aims to re-investigate the relationship between economic growth, renewable energy use, and CO₂ emissions in Algeria from 1990 to 2018. Motivated by the mixed findings of the existing literature, which ignore the Fourier function and bootstrap test and apply the newly developed Fourier bootstrap autoregressive distributed lag model (FARDL). Our findings indicate that renewable energy use and growth have a long-run relationship with CO₂ emissions and do not accept the existence of the Environmental Kuznets Curve (EKC) hypothesis for CO₂ emissions in Algeria. In the long term, the results show that renewable energy use has a negative and significant impact, and growth has a positive and statistically significant effect on CO₂ emissions. In the short run, the findings indicate that renewable energy use reduces CO₂ emissions, while both the growth and squared growth had positive and statistically insignificant impacts on CO₂ emissions, confirming the lack of evidence supporting the EKC hypothesis. Moreover, the causality test indicates a one-way causation from growth to renewable energy use, confirming the conservation hypothesis for Algeria and from growth to CO₂ emissions. Interestingly, we found one-way causality from CO₂ emissions to renewable energy use, attributing this to the fact that renewable energy usage has yet to reach a point that it can significantly cause a CO₂ emissions reduction. Based on the results, we recommend that policymakers design appropriate policies to decarbonize energy consumption, e.g., increasing fossil fuel costs and implementing a carbon tax. In contrast, Algeria should promote new CO₂ emission-reducing technologies without affecting economic growth, e.g., tax exemptions and reductions for enterprise owners in the renewable energy industry.     

Electricity systems with near-zero emissions of CO2 based on wind energy and coal gasification with CCS and hydrogen storage

Emissions from electricity generation will have to be reduced to near-zero to meet targets for reducing overall greenhouse gas emissions. Variable renewable energy sources such as wind will help to achieve this goal but they will have to be used in conjunction with other flexible power plants with low-CO₂ emissions. A process which would be well suited to this role would be coal gasification hydrogen production with CCS, underground buffer storage of hydrogen and independent gas turbine power generation. The gasification hydrogen production and CO₂ capture and storage equipment could operate at full load and only the power plants would need to operate flexibly and at low load, which would result in substantial practical and economic advantages. This paper analyses the performances and costs of such plants in scenarios with various amounts of wind generation, based on data for power demand and wind energy variability in the UK. In a scenario with 35% wind generation, overall emissions of CO₂ could be reduced by 98–99%. The cost of abating CO₂ emissions from the non-wind residual generation using the technique proposed in this paper would be less than 40% of the cost of using coal-fired power plants with integrated CCS.     

Multi-criteria PSO-based optimal design of grid-connected hybrid renewable energy systems

ABSTRACT

Human-induced climate change through the over liberation of greenhouse gases, resulting in devastating consequences to the environment, is a concern of considerable global significance which has fuelled the diversification to alternative renewable energy sources. The unpredictable nature of renewable resources is an impediment to developing renewable projects. More reliable, effective, and economically feasible renewable energy systems can be established by consolidating various renewable energy sources such as wind and solar into a hybrid system using batteries or back-up units like conventional energy generators or grids. The precise design of these systems is a critical step toward their effective deployment. An optimal sizing strategy was developed based on a heuristic particle swarm optimization (PSO) technique to determine the optimum number and configuration of PV panels, wind turbines, and battery units by minimizing the total system life-cycle cost while maximizing the reliability of the hybrid renewable energy system (HRES) in matching the electricity supply and demand. In addition, by constraining the amount of conventional electricity purchased from the grid, environmental concerns were also considered in the presented method. Various systems with different reliabilities and potential of reducing consumer’s CO₂ emissions were designed and the behavior of the proposed method was comprehensively investigated. An HRES may reduce the annualized cost of energy and carbon footprint significantly.     

The decline of environmental degradation by renewable energy consumption in the MERCOSUR countries: an approach with ARDL modeling

The impact of consumption of renewable energy on CO₂ emissions was investigated, in five MERCOSUR’s countries from 1980 to 2014. The autoregressive distributed lag (ARDL) in the form of Unrestricted Error Correction Model to decompose the total effect of variables into it is the short- and long-run components. The results of preliminary tests showed the presence of cross-sectional dependence between the variables, the stationarity of all variables in the first differences, and the homogeneity in panel data. Moreover, the specification tests pointed to the presence of cross-sectional dependence, non-correlation between the crosses, serial correlation in the panel data model, and the existence of heteroskedasticity. The results of semi-elasticities (short run) and elasticities (long run) of ARDL model pointed that the economic growth and consumption of fossil fuels increase the CO₂ emissions in the short and long run, while the consumption of renewable energy reduces them. Despite the consumption of renewable energy reducing the environmental degradation in the MERCOSUR countries, its impact is small. Finally, this study proved that the consumption of renewable energy is able to reduce the CO₂ emissions, which is responsible for the environmental degradation in the MERCOSUR countries, and that the economic growth of these same countries increases the CO₂ emissions, along with the fact that all MERCOSUR countries are highly dependent of fossil fuels.