污水生物除磷研究进展

水体富营养化是世界性难题,其中磷通常是主要限制因子.生物除磷工艺简单,污泥产量少,可节约能源,运行费用也较低,便于操作和磷的回收.在介绍水体中磷的来源、污染特点及其造成危害的基础上,着重综述了国内外生物除磷的研究进展,并对生物除磷存在的问题和发展趋势提出了一些看法.     

Toward a high-rate enhanced biological phosphorus removal process in a membrane-assisted bioreactor.

A membrane enhanced biological phosphorus removal (MEBPR) process was studied to determine the impact of hydraulic retention time (HRT) and solids retention time (SRT) on the removal of chemical oxygen demand (COD), nitrogen, and phosphorus from municipal wastewater. The MEBPR process was capable of delivering complete nitrification independent of the prevailing operating conditions, whereas a significant improvement in COD removal efficiency was observed at longer SRTs. In the absence of carbon-limiting conditions, the MEBPR process was able to achieve low phosphorus concentrations in the effluent at increasingly higher hydraulic loads, with the lowest HRT being 5 hours. The MEBPR process was also able to maintain optimal phosphorus removal when the SRT was increased from 12 to 20 days. However, at higher suspended solids concentrations, a substantial increase was observed in carbon utilization per unit mass of phosphorus removed from the influent. These results offer critical insights to the application of membrane technology for biological nutrient removal systems.     

Functionally relevant microorganisms to enhanced biological phosphorus removal performance at full-scale wastewater treatment plants in the United States

The abundance and relevance ofAccumulibacter phosphatis (presumed to be polyphosphate-accumulating organisms [PAOs]), Competibacter phosphatis (presumed to be glycogen-accumulating organisms [GAOs]), and tetrad-forming organisms (TFOs) to phosphorus removal performance at six full-scale enhanced biological phosphorus removal (EBPR) wastewater treatment plants were investigated. Coexistence of various levels of candidate PAOs and GAOs were found at these facilities. Accumulibacter were found to be 5 to 20% of the total bacterial population, and Competibacter were 0 to 20% of the total bacteria population. The TFO abundance varied from nondetectable to dominant. Anaerobic phosphorus (P) release to acetate uptake ratios (P(rel)/HAc(up)) obtained from bench tests were correlated positively with the abundance ratio of Accumulibacter/(Competibacter +TFOs) and negatively with the abundance of (Competibacter +TFOs) for all plants except one, suggesting the relevance of these candidate organisms to EBPR processes. However, effluent phosphorus concentration, amount of phosphorus removed, and process stability in an EBPR system were not directly related to high PAO abundance or mutually exclusive with a high GAO fraction. The plant that had the lowest average effluent phosphorus and highest stability rating had the lowest P(rel)/HAc(up) and the most TFOs. Evaluation of full-scale EBPR performance data indicated that low effluent phosphorus concentration and high process stability are positively correlated with the influent readily biodegradable chemical oxygen demand-to-phosphorus ratio. A system-level carbon-distribution-based conceptual model is proposed for capturing the dynamic competition between PAOs and GAOs and their effect on an EBPR process, and the results from this study seem to support the model hypothesis.     

强化生物除磷的机理模型研究进展

主要论述了以乙酸盐及葡萄糖作为基质的强化生物除磷的相关机理模型。当以乙酸盐为底物时．重点需要明确导致工艺中微生物代谢模式差异的原因及厌氧条件下还原力供给方式的问题;当以葡萄糖为底物时．主要需要解决厌氧条件下供能方式以及各种微生物之间的关系。某些抑制条件(如供氧不足)可能会促进强化生物除磷效果的实现。强化生物除磷各种机理的差异主要由所驯化的优势微生物种类及其代谢模式不同而造成的。     

Effect of initial pH control on enhanced biological phosphorus removal from wastewater containing acetic and propionic acids

In the literature most of the studies on the effect of pH on enhanced biological phosphorous removal were conducted with the acetate wastewater, and the pH was controlled during the entire anaerobic and aerobic stages. This paper investigated the influence of anaerobic initial pH control, which will be more practical than the entire process pH control strategy, on enhanced biological phosphorus removal from wastewater containing acetic and propionic acids. Typical pH profile showed that both the initial alkaline and acidic pH tended to neutralize due to the consumption of short-chain fatty acid (SCFA) and intracellular pH regulation by polyphosphate accumulating organisms (PAOs). It was observed that the glycogen degradation and polyhydroxyalkanoates (PHA) accumulation decreased with increasing initial pH, which disagreed with previous reports. In the literature the metabolisms of both glycogen and PHA by PAOs in the acetate wastewater were independent of pH. An anaerobic mechanism model was proposed to explain the intra- and extra-cellular pH buffer nature of PAOs, and to address the reasons for increased polyphosphate degradation and decreased PHA synthesis and glycogen degradation at higher pH. The optimal initial pH for higher soluble ortho-phosphorus (SOP) removal efficiency should be controlled between 6.4 and 7.2. This pH control strategy will be easier to use in practice of wastewater treatment plant.     

The mechanism of enhanced biological phosphorus removal washout and temperature relationships.

In this study, the combined effects of temperature and solids retention time (SRT) on enhanced biological phosphorus removal (EBPR) performance and the mechanism of EBPR washout were investigated. Two pilot-scale University of Cape Town (South Africa) systems fed with synthetic wastewater were operated at 5 and 10 degrees C. The results showed that the phosphorus removal performance was optimum at total SRT ranges of 16 to 24 days and 12 to 17 days for 5 and 10 degrees C, respectively, and steady-state phosphorus removal was greater at the lower temperature. Higher SRT values of up to 32 days at 5 degrees C and 25 days at 10 degrees C slightly reduced EBPR performance as a result of increased extent of endogenous respiration, which consumed internally stored glycogen, leaving less reducing power for poly-hydroxy alkanoate (PHA) formation in anaerobic stages. The phosphorus-accumulating organism (PAO) washout SRTs of the systems were determined as 3.5 days at 5 degrees C and 1.8 days at 10 degrees C, considerably less than the washout SRTs of nitrifiers. Polyphosphorus, the main energy reserve of the EBPR bacterial consortium, was not completely depleted, even at washout points. The inability of EBPR biomass to use glycogen to generate reducing power for PHA formation was the major reason for washout. The results not only suggest that glycogen mechanism is the most rate-limiting step in EBPR systems, but also that it is an integral part of EBPR biochemistry, as proposed originally by Mino et al. (1987), and later others (Pereira et al., 1996, Erdal et al., 2002; Erdal, Z. K., 2002). The aerobic washout SRT values (2.1 and 1.2 days for 5 and 10 degrees C, respectively) of this study did not fit the linear line for PAO washout developed by Mamais and Jenkins (1992). Perhaps this was because the feeds used during this study were chemical-oxygen-demand-limited (acetate-based synthetic feed), whereas the feeds used for their study were phosphorus-limited (external acetate added to domestic wastewater), resulting in different ratios of PAOs and nonPAOs in the biomass.     

Optimization of enhanced biological phosphorus removal after periods of low loading.

Enhanced biological phosphorus removal is a well-established technology for the treatment of municipal wastewater. However, increased effluent phosphorus concentrations have been reported after periods (days) of low organic loading. The purpose of this study was to evaluate different operating strategies to prevent discharge of effluent after such low-loading periods. Mechanisms leading to these operational problems have been related to the reduction of polyphosphate-accumulating organisms (PAOs) and their storage compounds (polyhydroxy alkanoates [PHA]). Increased effluent phosphorus concentrations can be the result of an imbalance between influent loading and PAOs in the system and an imbalance between phosphorus release and uptake rates. The following operating conditions were tested in their ability to prevent a reduction of PHA and of overall biomass during low organic loading conditions: (a) unchanged operation, (b) reduced aeration time, (c) reduced sludge wastage, and (d) combination of reduced aeration time and reduced sludge wastage. Experiments were performed in a laboratory-scale anaerobic-aerobic sequencing batch reactor, using acetate as the carbon source. Without operational adjustments, phosphorus-release rates decreased during low-loading periods but recovered rapidly. Phosphorus-uptake rates also decreased, and the recovery typically required several days to increase to normal levels. The combination of reduced aeration time and reduced sludge wastage allowed the maintenance of constant levels of both PHA and overall biomass. A mathematical model was used to explain the influence of the tested operating conditions on PAO and PHA concentrations. While experimental results were in general agreement with model predictions, the kinetic expression for phosphorus uptake deviated significantly for the first 24 hours after low-loading conditions. Mechanisms leading to these deviations need to be further investigated.     

The removal of phosphorus during wastewater treatment: a review

Phosphorus removal from wastewater can be achieved either through chemical removal, advanced biological treatment or a combination of both. The chemical removal of phosphorus involves the addition of calcium, iron and aluminium salts to achieve phosphorus precipitation by various mechanisms which are discussed. In addition, the effects of operating conditions, especially wastewater characteristics; sludge production in terms of quality and quantity; optimisation of chemical use and re-use; points of chemical addition combined with biological treatment; alternative chemical/physical treatments and examples of full-scale applications are also reviewed. Biological phosphorus removal is dependent upon the uptake of phosphorus in excess of normal bacterial metabolic requirements and is proposed as an alternative to chemical treatment. Early developments and the postulated removal mechanisms are reviewed; these include either natural chemical precipitation, enhanced biological removal, or a combination of both. The nature of excess biological phosphorus removal in activated sludge wastewater treatment plants is evaluated, considering various operating parameters, bacteriology and process designs.     

An observation on sludge granulation in an enhanced biological phosphorus removal process

A sequencing batch reactor (SBR) seeded with flocculated sludge and fed with synthetic wastewater was operated for an enhanced biological phosphorus removal (EBPR) process. Eight weeks after reactor startup, sludge granules were observed. The granules had a diameter of 0.5 to 3.0 mm and were brownish in color and spherical or ellipsoidal in shape. No significant change was observed in sludge granule size when operational pH was changed from 7 to 8. The 208-day continuous operation of the SBR showed that sludge granules were stably maintained with a sludge volume index (SVI) between 30 to 55 mL/g while securing a removal efficiency of 83% for carbon and 97% for phosphorus. Fluorescent in situ hybridization (FISH) confirmed the enrichment of polyphosphate accumulating organisms (PAOs) in the SBR. The observations of sludge granulation in this study encourage further studies in the development of granules-based EBPR process.     

Integrated physicochemical and biological treatment process for fluoride and phosphorus removal from fertilizer plant wastewater

The phosphate fertilizer industry produces highly hazardous and acidic wastewaters. This study was undertaken to develop an integrated approach for the treatment of wastewaters from the phosphate industry. Effluent samples were collected from a local phosphate fertilizer producer and were characterized by their high fluoride and phosphate content. First, the samples were pretreated by precipitation of phosphate and fluoride ions using hydrated lime. The resulting low- fluoride and phosphorus effluent was then treated with the enhanced biological phosphorus removal (EBPR) process to monitor the simultaneous removal of carbon, nitrogen, and phosphorus. Phosphorus removal included a two-stage anaerobic/aerobic system operating under continuous flow. Pretreated wastewater was added to the activated sludge and operated for 160 days in the reactor. The operating strategy included increasing the organic loading rate (OLR) from 0.3 to 1.2 g chemical oxygen demand (COD)/L.d. The stable and high removal rates of COD, NH4(+)-N, and PO4(3-)-P were then recorded. The mean concentrations of the influent were approximately 3600 mg COD/L, 60 mg N/L, and 14 mg P/L, which corresponded to removal efficiencies of approximately 98%, 86%, and 92%, respectively.     

城市污水处理厂反硝化聚磷菌的聚磷持久性

以桂林市第四污水处理厂氧化沟活性污泥为对象,研究在具有厌氧-缺氧-好氧环境的污水处理构筑物中富集存在的反硝化聚磷菌聚磷能力的持久性问题。结果表明,在此环境中富集的反硝化聚磷菌在经过3个周期的厌氧-缺氧条件下运行,最大释磷率由0.90 mg P/（g VSS.h）下降为0.07 mg P/（g VSS.h）,反硝化聚磷率由0.17 mg P/（g VSS.h）下降为0.04 mg P/（g VSS.h）。比较而言,在厌氧-缺氧-好氧环境下最大释磷率及聚磷率降幅较小,释磷率由0.59 mg P/（gVSS.h）下降为0.37 mg P/（g VSS.h）,反硝化聚磷率由0.17 mg P/（g VSS.h）下降为0.10 mg P/（g VSS.h）,厌氧-缺氧-好氧运行条件比单纯的厌氧-缺氧运行条件更有利于维持反硝化聚磷菌的聚磷性能。     

污水生物除磷若干影响因素分析

在系统阐述污水生物除磷机理的基础上,深入分析了微生物群体平衡、城市污水水质、环境因子以及工艺运行参数和运行方式等方面对生物除磷效果的影响.分析结果表明:生物除磷系统的溶解氧浓度不宜太高,一般好氧区DO＜2 mg/L,厌氧区DO＜0.2 mg/L;厌氧段存在硝酸盐对生物释磷有负面影响,缺氧段存在一定浓度的硝酸盐有利于生物聚磷;碳源必须充分、易降解;TKN/COD＜0.1的城市污水有利于生物除磷;pH偏碱性可提高生物除磷效率;低温对生物除磷效果影响不明显.     

Recovery of polyhydroxyalkanoate from activated sludge in an enhanced biological phosphorus removal bench-scale reactor.

A sequencing batch reactor was used to study the possibility of harvesting polyhydroxyalkanoate (PHA) from enhanced biological phosphorus removal (EBPR) processes without compromising treatment quality. Because, in EBPR, the highest PHA concentrations are observed after exposure of the sludge to anaerobic conditions, PHA accumulation was evaluated with collection of waste activated sludge (WAS) at the end of the anaerobic stage, in addition to the traditional removal after the aerobic stage. The system achieved good phosphorus removal, regardless of the point of WAS collection. When sludge was harvested at the end of the anaerobic stage, the PHA content of the sludge ranged from 7 to 16 mg PHA/100 mg mixed liquor volatile suspended solids. Although this level of PHA production is below levels obtained with pure cultures, the demonstrated ability to harvest PHA, while simultaneously satisfying phosphorus removal in an EBPR process, is a key initial step towards of the use of wastewater treatment plants for PHA production.     

COD对强化生物除磷系统的影响及OUR的变化规律

以实际生活污水为研究对象,在SBR系统中采用厌氧/好氧运行方式,考察强化生物除磷(EBPR)系统中好氧阶段COD浓度对聚磷菌除磷性能的影响以及不同好氧阶段COD浓度下的OUR变化规律.实验分4个阶段进行,分别为不投加外碳源、厌氧结束时投加不同体积的乙酸钠作为外碳源,使COD分别提高50、100和300mg/L.4种工况...     

酒店废水中LAS的强化生物处理研究

本文主要研究在生长有成熟生物膜的填料上强化LAS生物降解作用,提高生物接触氧化系统的LAS降解能力。试验结果表明,经强化LAS降解作用的二段生物接触氧化系统LAS去除率可由65％提高到80％以上。其中第二段接触氧化的LAS去除率高于第一段接触氧化。     

Effects of anaerobic selector hydraulic retention time on biological foam control and enhanced biological phosphorus removal in a pure-oxygen activated sludge system.

Increased anaerobic selector hydraulic retention times (HRTs) in a high-purity oxygen activated sludge process resulted in an increase in soluble orthophosphate release and biodegradable chemical oxygen demand removal, confirming that enhanced biological phosphorus removal occurs at aeration solids retention times (SRTs) below 1.7 days. Under operating conditions that included biological foam trapping and recycling, an anaerobic selector with HRTs higher than 55 minutes resulted in a decrease in filament counts and effective foam control. Effective norcardioform control is achieved through the combination of metabolic selective pressure and increased soluble organic substrate removal in the anaerobic selector and low aeration SRT.     

Micropollutant removal during biological wastewater treatment and a subsequent ozonation step

The design criteria for wastewater treatment plants (WWTP) and the sludge retention time, respectively, have a significant impact on micropollutant removal. The upgrade of an Austrian municipal WWTP to nitrogen removal (best available technology, BAT) resulted in increased elimination of most of the analyzed micropollutants. Substances, such as bisphenol-A, 17α-ethinylestradiol and the antibiotics erythromycin and roxithromycin were only removed after the upgrade of the WWTP. Nevertheless, the BAT was not sufficient to completely eliminate these compounds. Thus, a pilot scale ozonation plant was installed for additional treatment of the effluent. The application of 0.6 g O₃ g DOC⁻¹ increased the removal of most of the micropollutants, especially for compounds that were not degraded in the previous biological process, as for example carbamazepine and diclofenac. These results indicated that the ozonation of WWTP effluent is a promising technology to further decrease emissions of micropollutants from the treatment process.     

催化铁耦合生物除磷工艺中生物与化学除磷的关系

研究证明,将催化铁添加至传统生物除磷工艺的厌氧段,可使得生物除磷和化学除磷两者作用耦合。为了研究工艺中生物除磷与化学除磷的关系,采用不同催化铁投配率分别为0、1和2 g Fe/(mg P·d)的3组反应器进行实验。结果表明,催化铁投配率为1 g Fe/(mg P·d)时,系统的除磷效率最佳,去除率在90%以上,生物除磷与化学除磷耦合作用好;负荷为2 g Fe/(mg P·d)时,系统在未达到稳定之前即发生恶化,生物除磷作用受到抑制。铁化合物的积累量过多是系统出现恶化的主要原因:在污泥中铁含量小于30 mg Fe/g MLSS时,生物除磷作用与化学除磷作用两者协同,除磷效率提高;当污泥中铁含量超过52.8 mg Fe/g MLSS时,出现竞争,生物除磷作用受到抑制;通过排泥,降低污泥中铁含量,则除磷功能可以得到恢复。     

Design of control strategies for nutrient removal in a biological wastewater treatment process

Wastewater treatment plants (WWTP) are highly non-linear operations concerned with huge disturbances in flow rate and concentration of pollutants with uncertainties in the composition of influent wastewater. In this work, the activated sludge process model with seven reactor configuration in the ASM3bioP framework is used to achieve simultaneous removal of nitrogen and phosphorus. A total of 8 control approaches are designed and implemented in the advanced simulation framework for assessment of the performance. The performance of the WWTP (effluent quality index and global plant performance) and the operational costs are also evaluated to compare the control approaches. Additionally, this paper reports a comparison among proportional integral (PI) control, fuzzy logic control, and model-based predictive control (MPC) configurations framework. The simulation outcomes indicated that all three control approaches were able to enhance the performance of WWTP when compared with open loop operation.