昆明主城区城市地表径流污染特征分析

昆明市位于滇池上游,城市地表径流污染负荷对滇池水质具有直接影响。通过对昆明主城区内不同功能区12个监测点7次降雨径流过程水样的采集与分析,研究了昆明主城区城市地表径流污染特征。结果表明,昆明主城区城市地表径流中TSS、COD、TN和TP的多场降雨平均浓度分别为182.8、138.2、2.37和0.43 mg/L。不同功能区的地表径流水质存在显著差异(p<0.05);各功能区径流污染负荷顺序为:公路区>商业区>住宅区>文教区;不同功能区单场降雨径流水质动态变化规律是:污染物浓度在降雨径流初期相对较高,中后期浓度快速下降,并逐渐趋于稳定;地表利用功能、降雨特征和交通流量是影响城市地表径流水质的主要因素;城市地表径流中COD、TN、TP与TSS之间有较好的相关性,说明大部分的污染物质是以颗粒吸附态存在。     

不同降雨条件下非渗透地表径流TOC、TP输出规律和成因分析研究

研究城市非渗透地表径流TOC和TP的污染特性具有重要意义。以北京工业大学西校区和西大望路为研究对象,选取2015年的4场典型降雨场次(6月26日、7月18日、7月27日和8月31日),对该区域的非渗透地表径流中TOC和TP的输出规律及成因进行研究。结果表明:径流中TOC在各非渗透地表之间的变化差异性比TP大;非渗透屋面、道路和广场的地表径流污染初期冲刷效应显著,其中西大望路TP、TOC的初期径流浓度总体最高;地表径流污染物浓度受到下垫面空隙率、清扫频率和降雨间隔时间的影响,降雨间隔时间越长时TOC和TP的累积量越大,形成的径流浓度就越高,当下垫面空隙率越大时,TOC和TP越易蓄积,形成的径流浓度也越高。     

降雨入渗与地表径流污染减量模拟试验研究

针对造成水体污染的城市降雨地表径流问题,建立模拟降雨系统,选用聚合物与功能材料,改良土壤结构,提高土壤对雨水的渗透性,削减地表径流及径流携带污染物对纳污水体的污染.结果表明,复合施用PAM与沸石使降雨径流过流体土壤结构被改良,对降雨径流的削减作用明显,对土壤的降水渗透有显著的促进.数据表明,沸石与PAM配施对削减降雨地表径流与提高降雨土壤入渗的效果有协同作用.在36、72和108 mm/h不同降雨强度下,处理土壤水的入渗较对照分别提高了35%～76%、32%～66%和18%～47%,降雨后土壤的含水量较对照可提高1～5倍.     

降雨入渗与地表径流污染减量模拟试验研究

针对造成水体污染的城市降雨地表径流问题,建立模拟降雨系统,选用聚合物与功能材料,改良土壤结构,提高土壤对雨水的渗透性,削减地表径流及径流携带污染物对纳污水体的污染.结果表明,复合施用PAM与沸石使降雨径流过流体土壤结构被改良,对降雨径流的削减作用明显,对土壤的降水渗透有显著的促进.数据表明,沸石与PAM配施对削减降雨地表径流与提高降雨土壤入渗的效果有协同作用.在36、72和108 mm/h不同降雨强度下,处理土壤水的入渗较对照分别提高了35%～76%、32%～66%和18%～47%,降雨后土壤的含水量较对照可提高1～5倍.     

北京城市雨水、树冠水和地表径流中有机氯农药的污染特征

对北京降雨过程中雨水、树冠水、地表径流等介质中有机氯农药(OCPs)的污染特征进行了研究,研究的污染物包括六氯苯(HCB)、六六六(HCH)和滴滴涕(DDT)。结果显示,在雨水、树冠水和地表径流中,HCH含量最高(几何平均浓度分别为11.1、21.6和25.1 ng/L),其次是HCB(几何平均浓度分别为3.71、3.54和5.91 ng/L)和DDT(几何平均浓度分别为2.64、4.66和10.6 ng/L)。对地表径流样品中所测的OCPs组分浓度与径流水质参数和气象参数的相关分析显示,所测各OCPs组分浓度与pH呈显著负相关,与径流的溶解性有机碳含量呈显著正相关,降雨量和雨前晴天数对不同组分OCPs的影响并不完全相同。平均贡献率的计算表明,雨水是城市地表径流中OCPs的一个重要来源,树冠水的贡献也不可忽视。     

不同地表雨水径流冲刷特性分析

选择北京市某城区典型地表(校园、自行车道、商业街和高架桥)的雨水径流作为研究对象,系统分析了不同地表雨水径流的冲刷特性。分析结果表明:不同地表初期冲刷现象都比较明显,控制不同地表20%的初期雨水可以削减污染物总量的40%～60%,高架桥初期雨水径流中COD、SS和TP浓度最高,校园初期雨水径流中TN浓度最高。不同地表雨水径流的水质优劣顺序为:校园>商业街>自行车道>高架桥。校园和自行车道在整个降雨过程中D50和D90粒径大小相近,分别为30μm和50μm左右,且变化幅度都较小。高架桥和商业街在雨水径流初期D50和D90粒径有明显减小,但后期均出现较大幅度的波动,其粒径明显大于校园和自行车道。上述研究成果对于城市不同地表雨水径流污染控制和场地开发具有重要意义。     

西安市城市主干道路面径流污染及沉淀特性研究

在西安市城市主干道南二环路建立路面径流采样站,利用自制流量等比例采样装置,采集2009年3-11月的34场降雨径流,测试研究径流SS、COD事件平均浓度(EMC)、有机污染物赋存状态,并就降雨特征对径流污染的影响进行相关分析,还采用累积曲线法对16场径流水样进行沉淀实验,研究沉淀对径流中污染物的去除效果.结果表明,城市...     

河岸缓冲带对地表径流及悬浮颗粒物的阻控效应

河岸缓冲带可以有效地截留阻控农业非点源污染物向水体中迁移。构建草木犀带T2、草木犀与枫杨混合带(T3林草带)和杂草带(T1对照)3种类型人工河岸缓冲带,通过野外径流实验区2年的实地观测,对寒冷地区不同类型及不同宽度植被缓冲带阻控地表径流和悬浮颗粒物(SS)的能力进行了初步的研究。实验共收集21次降雨径流和3次融雪径流,通过对径流水样分析,结果表明,3种类型缓冲带均能有效截留降雨径流,5 m宽T3缓冲带的截留效率达78%。河岸缓冲带对降雨径流的阻控效应明显高于融雪径流,且对地表径流中SS质量的截留明显高于对浓度的截留作用。枫杨与草木犀的混合种植并没有显著减少融雪径流中悬浮颗粒物的含量,宽度达到13 m时,其阻控作用才明显。总体上,林草带对地表径流及悬浮颗粒物的阻控能力最强。     

基于平均负荷的降雨径流污染负荷模型研究

在九寨沟旅游景区,对公路和栈道进行人工降雨径流污染负荷的过程研究。浓度过程曲线表明,初始高浓度与平台期浓度之间相差3~5倍,而负荷过程曲线表明,各时段负荷曲线无明显峰值存在。这意味着污染物平均浓度的获取,需要降雨径流的水量水质同步监测数据的较大样本,才能消除随机性影响。而各时段负荷数据向平均负荷期望收敛的速度,将比平均浓度期望更快。利用这一规律,以平均负荷值代替降雨事件的污染物平均浓度(EMC),构建了基于平均负荷值的年地表径流负荷模型。本模型只需要有限场水量水质同步监测数据,就可获得特定地区面源污染物的平均负荷值。在消除随机不确定性同时,提高了可操作性。采用研制的模型,计算出九寨沟各子区公路面源的TP排放负荷,在0.87~2.07 kg/a之间,栈道面源TP排放负荷,在0.27~1.22 kg/a之间。     

城市区域不同屋顶降雨径流水质特征

城市屋顶降雨径流是城市面源污染的主要组成部分之一。为了解城市不同屋顶降雨径流的水质特性,以重庆地区5种屋顶为例进行了20场降雨径流的水质监测。研究结果表明,不透水屋顶降雨径流污染物浓度均随降雨历时的延长而降低,混凝土屋顶降雨径流的COD、TP、TN、NH3-N平均浓度分别是瓦屋顶的1.6、1.7、1.4和1.5倍,且不透水屋顶降雨径流总氮的70%~80%为无机氮,总磷的20%~32%为磷酸盐;浅层屋顶降雨径流COD、TN、TP、NH3-N和NO-3-N浓度分别是深层绿色屋顶的0.25~0.26、0.3~0.5、0.07~0.09、0.3~0.6、0.05~0.06倍,且绿色屋顶降雨径流总氮的60%~80%为硝态氮。前期干旱天数和混凝土屋顶径流中的TN、接骨草屋顶径流中的氨氮浓度呈显著正相关关系,混凝土屋顶径流TP浓度与降雨强度显著正相关,降雨持续时间和瓦屋顶径流TSS平均浓度显著正相关。研究结果为城市建筑屋顶降雨径流的科学管理提供了参考。     

Investigation of the characteristics of the reflectivity of clouds

This paper investigates some of the reflectivity characteristics that clouds (when modelled as solid bodies) must exhibit to be compatible with observations that the reflecting surface of a cloud (i) appears almost equally bright across its face, (ii) is brightest when the cloud is opposite to the Sun but decreases in brightness as the cloud moves to other positions and (iii) increases in brightness with increasing optical thickness of the cloud in the observer's line of sight. These observations, respectively, are shown to imply that the peak value of the bidirectional total reflectivity from a cloud surface (i) increases in inverse proportion to the cosine of the angle between the Sun and the normal to the cloud surface, as the incident angle increases, (ii) appears to be directed back in the direction of the incident radiation, and (iii) increases as optical thickness of the cloud in the observer's line of sight increases. The results could have application in many fields (e.g. modelling diffuse radiance distributions for cloudy skies).     

Optimization of Height of Release of Air Pollutants

A number of key projects in the Environmental Protection Agency (EPA) particulate R&;D program having applicability to industry are presented. For electrostatic precipitators (ESP) there is presented the result of work on large diameter discharge electrodes which provide a decrease in penetration of up to a factor of 4 when compared to conventional small diameter electrodes. Also discussed is the multistage ESP which provides a collection efficiency that would require a collecting plate area 4 or 5 times larger with conventional ESP technology. The E-SOX technology makes use of the multistage concept to free up space in the ESP for SO₂ removals of up to 90%. Electrostatically augmented fabric filtration provides a reduction in pressure drop of about 5 0% as compared to conventional fabric filtration. Wind tunnel modeling of windbreaks for material storage piles indicates a potential for providing engineering design data that would allow significant emission reduction caused by wind erosion     

Estimation of uncertainty of sampling for analysis of pesticide residues

Abstract

A computer model was used to take random samples from primary sample populations obtained from field trials to simulate the uncertainty of sampling for residue analysis of plant commodities and soil. The results indicate about 40%, 30% and 20% relative uncertainty when random samples of size 5, 10 and 25 are taken respectively, from a single lot. Therefore the sample size should be the same for establishing and enforcing legal limits.     

扬中生态环境建设的思考与实践

结合扬中生态环境的基本情况和存在的不足，进行了具体分析，对扬中未来生态建设的发展方向提出了建议及实施措施。     

An application of the theory of kinematics of mixing to the study of tropospheric dispersion

The most common technique used for numerical simulations of tracer mixing is that of the numerical solution of the advection–diffusion equation with the unresolved fluxes parameterized using the similarity theory. Despite correct predictions of the overall directions of transport, models based on a numerical solution of the advection–diffusion equation lack sufficient accuracy to correctly reproduce the coupling of mixing with small scale processes which are sensitive to the microstructure of the tracer distribution. The objective of this paper is to revisit the basic formalism employed in numerical models used to investigate atmospheric tracers. The main mathematical method proposed here is the theory of kinematics of mixing which could be applied effectively for simulations of atmospheric transport processes. At the beginning of the paper, we introduce simple mathematical transformations in order to demonstrate how complex topological structures are created by mixing processes. These idealistic flow systems are essential to explain transport properties of much more complex three-dimensional geophysical flows. An example of the application of the kinematics of mixing to the analysis of tracer transport on a planetary scale is presented in the following sections. The complex filamentary structures simulated in the numerical experiment are evaluated using some commonly applied statistical measures in order to compare the results with the data published in the literature. The results of the experiment are also analysed with the help of simple conceptual models of fluid filaments. The microstructure of the tracer distribution introduced in the paper is essential to increase our understanding of atmospheric transport and to develop more realistic parameterizations of small-scale mixing. The presented results could also be used to improve calculations of the coupling between microphysical processes and tracer mixing.     

实验室质量管理体系内部审核的实施

在实施ISO／IEC17025：1999标准《检测和校准实验室能力的通用要求》过程中，通过实验室质量管理体系内部审核的实践与系统分析，识别出内部审核实施阶段的关键环节，提出召开首次会议、收集审核证据、确定审核发现和召开末次会议的技术方法，对提高内部审核的质量和有效性、获得可靠的审核结论具有重要意义。     

次氯酸钠发生器的研制

介绍了电解法生产次氯酸钠的原理 ,并在原有生产工艺的基础上进行了重新设计和对设备的重新选择、改造 ,得出了各个工艺参数的最佳值 ,生产出高品质的次氯酸钠     

Spectrophotometric Determination of Atmospheric Acidity by means of the Displacement of the Equilibrium of Acid-Base Indicators

A method is described for determining acidity by means of the spectrophotometric determination of the displacement of the equilibrium of açid-base indicators. The method is simple, sensitive and free of known interferences. There is no dependence on costly or sophisticated equipment and the results obtained are reliable and reproducible.     

嗜盐菌的特性与高盐废水生物处理的进展

论述了嗜盐菌的形态特征、营养构成、生理特性和嗜盐机理，以及利用其特性在含盐有机废水处理中的应用，综述了国内外生化处理高含盐量有机工业废水的实验研究成果、在实际废水工程中的应用及其发展方向。对嗜盐菌的培养与驯化有一定的参考价值，对含盐废水处理工程的设计与运行有指导意义。