Exposure of German residents to ethylene and propylene glycol ethers in general and after cleaning scenarios

Glycol ethers are a class of semi-volatile substances used as solvents in a variety of consumer products like cleaning agents, paints, cosmetics as well as chemical intermediates.We determined 11 metabolites of ethylene and propylene glycol ethers in 44 urine samples of German residents (background level study) and in urine samples of individuals after exposure to glycol ethers during cleaning activities (exposure study).In the study on the background exposure, methoxyacetic acid and phenoxyacetic acid (PhAA) could be detected in each urine sample with median (95th percentile) values of 0.11 mg L^?1 (0.30 mg L^?1) and 0.80 mg L^?1 (23.6 mg L^?1), respectively. The other metabolites were found in a limited number of samples or in none.In the exposure study, 5–8 rooms were cleaned with a cleaner containing ethylene glycol monobutyl ether (EGBE), propylene glycol monobutyl ether (PGBE), or ethylene glycol monopropyl ether (EGPE). During cleaning the mean levels in the indoor air were 7.5 mg m^?3 (EGBE), 3.0 mg m^?3 (PGBE), and 3.3 mg m^?3 (EGPE), respectively. The related metabolite levels analysed in the urine of the residents of the rooms at the day of cleaning were 2.4 mg L^?1 for butoxyacetic acid, 0.06 mg L^?1 for 2-butoxypropionic acid, and 2.3 mg L^?1 for n-propoxyacetic acid.Overall, our study indicates that the exposure of the population to glycol ethers is generally low, with the exception of PhAA. Moreover, the results of the cleaning scenarios demonstrate that the use of indoor cleaning agents containing glycol ethers can lead to a detectable internal exposure of residents.     

Chlorpyrifos-induced changes in oxidant/antioxidant status and haematological parameters of Cyprinus carpio carpio: Ameliorative effect of lycopene

The present study was carried out to investigate the potential ameliorative effects of lycopene against chlorpyrifos (CPF) toxicity in carp. The fish were divided into 7 different experimental groups and received the following treatments: Group 1, control; Group 2, orally administered corn oil; Group 3, oral lycopene (10 mg kg^?1 body weight); Group 4, exposure to 0.040 mg L^?1 CPF; Group 5, exposure to 0.040 mg L^?1 CPF plus oral administration of 10 mg kg^?1 lycopene; Group 6, exposure to 0.080 mg L^?1 CPF; and Group 7, exposure to 0.040 mg L^?1 CPF plus oral administration of 10 mg kg^?1 lycopene. Treatment was continued for 14 d and samples of the blood and tissue (liver, kidney, and gill) were collected at the end of the experiment and analysed for their oxidant–antioxidant status, including the malondialdehyde (MDA) levels, and the superoxide dismutase (SOD), catalase (CAT), and glutathione peroxidase (GSH-Px) activity. The samples were also measured for changes in the haematological parameters, such as the red blood cell (RBC) and white blood cell (WBC) counts, the haemoglobin concentration (Hb), the haematocrit (Ht) level, and the erythrocyte indices: the mean corpuscular volume (MCV), the mean corpuscular haemoglobin (MCH) and the mean corpuscular haemoglobin concentration (MCHC). The findings of this study demonstrated that CPF had a negative effect on the haematological parameters and the antioxidant enzyme activities of the fish; this toxic effect was neutralised by the administration of lycopene. The present results suggest that lycopene (10 mg kg^?1) can be effective in the protection of CPF-induced toxicity in fish.     

Arsenic in marine sediments from French Mediterranean ports: Geochemical partitioning,bioavailability and ecotoxicology

This work investigates arsenic mobility, bioavailability and toxicity in marine port sediments using chemical sequential extraction and laboratory toxicity tests. Sediment samples were collected from two different Mediterranean ports, one highly polluted with arsenic and other inorganic and organic pollutants (Estaque port (EST)), and the other one, less polluted, with a low arsenic content (Saint Mandrier port (SM)). Arsenic distribution in the solid phase was studied using a sequential extraction procedure specifically developed for appraising arsenic mobility in sediments. Toxicity assessment was performed on sediment elutriates, solid phases and aqueous arsenic species as single substance using the embryo-toxicity test on oyster larvae (Crassostrea gigas) and the Microtox test with Vibrio fischeri. Toxicity results showed that all sediment samples presented acute and sub-chronic toxic effects on oyster larvae and bacteria, respectively. The Microtox solid phase test allow to discriminate As-contaminated samples from the less contaminated ones, suggesting that toxicity of whole sediment samples is related to arsenic content. Toxicity of dissolved arsenic species as single substance showed that Vibrio fischeri and oyster larvae are most sensitive to As(V) than As(III). The distribution coefficient (Kd) of arsenic in sediment samples was estimated using results obtained in chemical sequential extractions. The Kd value is greater in SM (450 L kg^?1) than in EST (55 L kg^?1), indicating that arsenic availability is higher for the most toxic sediment sample (Estaque port). This study demonstrates that arsenic speciation play an important role on arsenic mobility and its bioavailability in marine port sediments.     

Production and partial characterization of bioemulsifier from a chromium-resistant actinobacteria

Surface-active compounds such as synthetic emulsifiers have been used for several decades, both for the degradation of hydrocarbons and increasing desorption of soil-bound metals. However, due to their high toxicity, low degradability, and production costs unaffordable for use in larger ecosystems, synthetic emulsifiers have been gradually replaced by those derived from natural sources such as plants or microbes. In previous studies, the bacterium Streptomyces sp. MC1 has shown the ability to reduce and/or accumulate Cr(VI), a highly promising advance in the development of methods for environmental clean-up of sites contaminated with chromium. Here, new studies on the production of emulsifier from this strain are presented. The cultivation factors that have a significant influence on emulsifier biosynthesis, as well as the interactions among them, were studied by factorial design. Based upon optimization studies, maximum bioemulsifier production was detected in the culture medium having an initial pH of 8 with phosphate 2.0 g L^?1 and Ca⁺² 1.0 g L^?1 added, with an emulsification index about 3.5 times greater compared to the basal value. Interestingly, in the presence of 5.0 g L^?1 Cr(VI), Streptomyces sp. MC1 retained about 65% of its emulsifier production ability. Partially purified emulsifier presented high thermo-stability and partial water solubility. These findings could have promising future prospects for the remediation of organic- and metal-contaminated sites.     

The relationship of root porosity and radial oxygen loss on arsenic tolerance and uptake in rice grains and straw

The correlations among arsenic (As) accumulation in grains and straw, rates of radial oxygen loss (ROL), and porosity of roots using 25 rice cultivars were investigated based on two pot experiments: (1) soil with addition of 100 mg As kg^?1 for analysis of As in grains and straw, and (2) deoxygenated solution for analyzing rates of ROL and porosity of roots. The results showed that there were great differences in grain As (0.71–1.72 mg kg^?1) and straw As (15.6–31.7 mg kg^?1), rates of ROL (7.40–13.24 mmol O₂ kg^?1 root d.w. h^?1), and porosity (20.91–33.08%) among the cultivars. There were significant negative correlations between As in grains or straw and ROL and porosity, and significant positive correlations between rates of ROL and porosities, respectively. Rice cultivars with high porosities tended to possess higher rates of ROL, and had higher capacities for limiting the transfer of As to aboveground tissues.     

Phytoremedial assessment of flora tolerant to heavy metals in the contaminated soils of an abandoned Pb mine in Central Portugal

Significant accumulation of heavy metals in soils and flora exists around the abandoned Barbadalhos Pb mine in Central Portugal. Soil and plant samples [49 species] were collected from two line transects, LT 1 and LT 2, in the mineralized and non-mineralized area, respectively to gain a comprehensive picture of heavy metals in soils and flora to assess its potential for phytoremediation. Phytosociological inventories of the vegetation were made using the Braun-Blanquet cover-abundance scale. Metal concentrations in soil ranged from (in mg kg^?1): 98–9330 [Pb], 110–517 [Zn], 7.1–50 [Co], 69–123 [Cr], 31–193 [Cu], 33 400–98 500 [Fe], 7.7–51 [Ni], 0.95–13 [Ag], 2.8–208 [As], and 71–2220 [Mn] along LT 1; and 24–93 [Pb], 30–162 [Zn], 3.7–34 [Co], 61–196 [Cr], 21–46 [Cu], 24 100–59 400 [Fe], 17–87 [Ni], 0.71–1.9 [Ag], 4.3–12 [As], and 44–1800 [Mn] along LT 2. Plant metal content ranged from (in mg kg^?1): 1.11–548 [Pb], 7.06–1020 [Zn], 0.08–2.09 [Co], 0.09–2.03 [Cr], 2.63–38.5 [Cu], 10.4–4450 [Fe], 0.38–8.9 [Ni], and 0.03–1.9 [Ag] along LT 1; and 0.94–11.58 [Pb], 2.83–96.5 [Zn], 0.12–1.44 [Co], 0.21–1.49 [Cr], 1.61–22.7 [Cu], 4.6–2050 [Fe], 0.51–4.81 [Ni], and 0.02–0.31 [Ag] along LT 2. Plants with highest uptake of metals were: Cistus salvifolius (548 mg Pb kg^?1), Digitalis purpurea (1017 mg Zn kg^?1 and 4450 mg Fe kg^?1). Mentha suavolens and Ruscus ulmifolius were seen to hyperaccumulate Ag (1.9 and 1 mg Ag kg^?1, respectively). More metals and higher concentrations were traced in plants from LT 1, especially for Pb and Zn.     

Effect of copper(II) on biodegradation of benzo[a]pyrene by Stenotrophomonas maltophilia

Benzo[a]pyrene (BaP) biodegradation by Stenotrophomonas maltophilia was studied under the influence of co-existed Cu(II) ions. About 45% degradation was achieved within 3 d when dealing with 1 mg L^?1 BaP under initial natural pH at 30 °C; degradation reached 48% in 2 d at 35 °C. Efficacy of BaP biodegradation reached the highest point at pH 4. In the presence of 10 mg L^?1 Cu(II) ions, the BaP removal ratio was 45% on 7th day, and maintained stable from 7 to 14 d at 30 °C under natural pH. The favorable temperature and pH for BaP removal was 25 °C and 6.0 respectively, when Cu(II) ions coexisted in the solutions. Experiments on cometabolism indicated that S. maltophilia performed best when sucrose was used as an additional carbon source. GC–MS analysis revealed that the five rings of BaP opened, producing compounds with one or two rings which were more bioavailable.     

Ecotoxicity of xanthene dyes and a non-chlorinated bisphenol in soil

Soil eco-toxicity testing was conducted in support of Canada’s Chemical Management Plan (CMP) to fill data gaps for organic chemicals known to primarily partition to soil, and of which the persistence and inherent toxicity are uncertain. Two compounds representative of specific classes of chemicals: non-chlorinated bisphenols containing an –OH group (4,4′-methylenebis(2,6-di-tert-butylphenol (Binox)) and xanthene dyes (2′,4′,5′,7′-tetrabromo-4,5,6,7-tetrachloro-3′,6′-dihydroxy-, disodium salt (Phloxine B), 2′,4′,5’,7′-tetrabromofluorescein (TBF), 4′,5′-dibromofluorescein (DBF), and 4,5,6,7-tetrachlorofluorescein (TCF)) were evaluated. The effect of these substances on plant growth (Elymus lanceolatus and Trifolium pratense) and soil invertebrate survival and reproduction (Folsomia candida and Eisenia andrei) were assessed using a field-collected sandy soil. Binox was persistent throughout testing (up to 63 d) with an average recovery of 77 ± 2.9% at test end. Binox was not toxic to plants (IC50s > 1076 mg kg^?1) or E. andrei (IC50s > 2651 mg kg^?1); however, a significant reduction in F. candida adult survival and reproduction (IC50 = 89 (44–149) mg kg^?1) was evident. Phloxine B was also persistent throughout testing, with an average recovery of 82 ± 3.0% at test end. Phloxine B was significantly more toxic than Binox, with significant reductions in plant root growth (IC50s ? 11 mg kg^?1) and invertebrate reproduction (IC50s ? 22 mg kg^?1). DBF toxicity was not significantly different from that of Phloxine B for plant root growth (IC50s ? 30 mg kg^?1), but was significantly less toxic for shoot growth (IC50s ? 1758 mg kg^?1), and invertebrate adult survival (IC50s ? 2291 mg kg^?1) and reproduction (IC50s ? 451 mg kg^?1). A comparison between all four xanthene dyes was completed using F. candida, with the degree of toxicity in the order of Phloxine B ? TBF ～ DBF > TCF. The results from these studies will contribute to data gaps for poorly understood chemicals (and chemical groupings) under review for environmental risk assessments, and will aid in the validation of model predictions used to characterize the fate and effects of these substances in soil environments.     

Decolorization of azo dye reactive black B by Bacillus cereus strain HJ-1

Reactive black B (RBB) is a group of azo dyes that are widely used in the textile industry. In this study, a new microbial strain was isolated from azo dye contaminated river sediment which is capable of degrading RBB. The strain was identified as Bacillus cereus strain HJ-1 by 16S rRNA gene sequences analysis. The optimal conditions for RBB decolorization by B. cereus strain HJ-1 are: 25 °C, pH 8, 1 CMC of triton X-100, 0.15 g L^?1 of added yeast extract, 0.125 g L^?1 of added glucose and static culture. Then the toxicity of RBB on the green algae Chlorella vulgaris was determined. The results showed that the median effective concentration (EC₅₀) of RBB for C. vulgaris is 48 mg L^?1 and toxicity will really decrease after decolorization. In the end, B. cereus strain HJ-1 was amended into the origin river sediment and analyzed the whole microbial community structure of river sediment samples by PCR-DGGE technique. The result showed that B. cereus strain HJ-1 could survive in the river sediment after 12 d of incubation. Based on this work, we hope that these findings could provide some useful information for applying the decolorization of RBB in our environment.     

Determination of oral uptake and biodistribution of platinum and chromium by the garden snail (Helix aspersa) employing nano-secondary ion mass-spectrometry

Environmental heavy metal contamination is a case of concern for both animal and human health. Studying the fate of metals in plant or animal tissues may provide information on pollution. In the present study, we investigated the possibility to follow the biological fate of chromium and platinum uptake in common garden snails (Helix aspersa), typically accumulating high concentrations of metals from their environment. Chromium and platinum were administered orally to snails in 5 groups (n = 25/group): control, food contaminated by ca. 2.5 μg g^?1 and 19 μg g^?1 chromium and 2.5 μg g^?1 and 25 μg g^?1 platinum, for 8 weeks. Following exposure, surviving snails were sacrificed, shell and remaining tissue investigated by ICP-MS, and shell, midgut gland and mantle by nano-secondary ion mass-spectrometry (Nano-SIMS). ¹²C¹⁴N-normalized platinum and ⁴⁰Ca-normalized chromium measurements indicated highest enrichments in cellular vesicles of the midgut gland, and lower concentrations in mantle and shell, with significantly higher platinum and chromium concentrations in the 2 exposure groups vs. control (P < 0.05), with somewhat differing distribution patterns for chromium and platinum. Comparable results were obtained by ICP-MS, with both chromium and platinum fed snails showing drastically elevated concentrations of metals in shell (up to 78 and 122 μg g^?1 dw platinum and chromium, respectively) and in other tissues (up to 200 and 1125 μg g^?1 dw platinum and chromium, respectively). Nano-SIMS allowed for semi-quantitative comparison of metal fate in snail tissues, making this an interesting technique for future studies in the area of environmental pollution.     

Responses of antioxidant status and Na+–K+-ATPase activity in gill of rainbow trout,Oncorhynchus mykiss,chronically treated with carbamazepine

In recent years, chemical pollution by the residual pharmaceuticals has been increasingly important issue due to its widely present in the aquatic environment. However, the toxicological effects of residual pharmaceuticals on fish have not been adequately researched. The aim of this work is to investigate the toxic effect of CBZ, an anticonvulsant drug commonly present in aquatic environment, on antioxidant status and Na⁺–K⁺-ATPase in gill of rainbow trout exposed to sublethal CBZ (1.0 μg L⁻¹, 0.2 mg L⁻¹ and 2.0 mg L⁻¹) for 7, 21 and 42 d. After prolonged exposure of CBZ at higher test concentration (0.2 or 2.0 mg L⁻¹), oxidative stress was apparent as reflected by the significant higher LPO and CP levels in fish gill, as well as the significant inhibition of antioxidant enzymes activities including SOD, CAT, GR and GPx. Besides, reduced glutathione level and Na⁺–K⁺-ATPase activity were significantly lower than those of the control after 42 d of exposure to CBZ at higher test concentration (0.2 or 2.0 mg L⁻¹). The results of this study indicate that chronic exposure of CBZ has altered multiple physiological indices in fish gill; however, before those parameters are used as special biomarkers for monitoring residual pharmaceuticals in aquatic environment, more detailed experiments in laboratory need to be performed in the future.     

Earthworm ecotoxicological assessments of pesticides used to treat seeds under tropical conditions

Ecotoxicological laboratory tests (lower-tier tests) are fundamental tools for assessing the toxicity of pesticides to soil organisms. In this study, using these tests under tropical conditions, we quantified the impact of the insecticides imidacloprid, fipronil, and thiametoxam, and the fungicides captan and carboxin + thiram, all of which are used in the chemical treatment of crop seeds, on the survival, reproduction, and behavior of Eisenia andrei (Oligochaeta). With the exception of imidacloprid, none of the pesticides tested caused mortality in E. andrei in artificial soils. The LC₅₀ of imidacloprid was estimated as 25.53 mg active ingredient kg^?1 of dry soil. Earthworm reproduction rates were reduced by imidacloprid (EC₅₀ = 4.07 mg kg^?1), fipronil (EC₂₀ = 23.16 mg kg^?1), carboxin + thiram (EC₅₀ = 56.38 mg kg^?1), captan (EC₅₀ = 334.84 mg kg^?1), and thiametoxam (EC₅₀ = 791.99 mg kg^?1). Avoidance behavior was observed in the presence of imidacloprid (AC₅₀ = 0.11 mg kg^?1), captan (AC₅₀ = 33.54 mg kg^?1), carboxin + thiram (AC₅₀ = 60.32 mg kg^?1), and thiametoxam (AC₅₀ = >20 mg kg^?1). Earthworms showed a preference for soils with the insecticide fipronil. Imidacloprid was the most toxic of the substances tested for E. andrei. The avoidance test was the most sensitive test for most pesticides studied, but results varied between pesticides. These results offer new insights on the toxicity of pesticides used to treat seeds in tropical regions. However, they should be complemented with higher-tier tests in order to reduce the uncertainties in risk assessment.     

Lead,mercury, cadmium,chromium, nickel,copper, zinc,calcium, iron,manganese and chromium (VI) levels in Nigeria and United States of America cement dust

This study was aimed at investigating the relative abundance of heavy metals in cement dust from different cement dust factories in order to predict their possible roles in the severity of cement dust toxicity. The concentrations of total mercury (Hg), copper (Cu), chromium (Cr), cadmium (Cd), nickel (Ni), manganese (Mn), lead (Pb), iron (Fe) and chromium (VI) (Cr (VI)) levels in cement dust and clinker samples from Nigeria and cement dust sample from the United States of America (USA) were determined using graphite furnace atomic absorption (GFAAS), while Zn and Ca were measured by flame atomic absorption spectrophotometry (FAAS), and Cr (VI) by colorimetric method. Total Cu, Ni and Mn were significantly higher in cement dust sample from USA (p < 0.05), also, both total Cr and Cr (VI) were 5.4–26 folds higher in USA cement dust compared with Nigeria cement dust or clinker (p < 0.001). Total Cd was higher in both Nigeria cement dust and clinker (p < 0.05 and p < 0.001), respectively. Mercury was more in both Nigeria cement dust and clinker (p < 0.05), while Pb was only significantly higher in clinker from Nigeria (p < 0.001). These results show that cement dust contain mixture of metals that are known human carcinogens and also have been implicated in other debilitating health conditions. Additionally, it revealed that metal content concentrations are factory dependent. This study appears to indicate the need for additional human studies relating the toxicity of these metals and their health impacts on cement factory workers.     

Fate of caffeine in mesocosms wetland planted with Scirpus validus

Uptake, accumulation and translocation of caffeine by Scirpus validus grown in hydroponic condition were investigated. The plants were cultivated in Hoagland’s nutrient solution spiked with caffeine at concentrations of 0.5–2.0 mg L^?1. The effect of photodegradation on caffeine elimination was determined in dark controls and proved to be negligible. Removal of caffeine in mesocosms without plants showed however that biodegradation could account for about 15–19% of the caffeine lost from solutions after 3 and 7 d. Plant uptake played a significant role in caffeine elimination. Caffeine was detected in both roots and shoots of S. validus. Root concentrations of caffeine were 0.1–6.1 μg g^?1, while the concentrations for shoots were 6.4–13.7 μg g^?1. A significant (p < 0.05) positive correlation between the concentration in the root and the initial concentrations in the nutrient solution was observed. The bioaccumulation factors (BAFs) of caffeine for roots ranged from 0.2 to 3.1, while BAFs for shoots ranged from 3.2 to 16.9. Translocation from roots to shoots was the major pathway of shoot accumulation. The fraction of caffeine in the roots as a percentage of the total caffeine mass in solution was limited to 0.2–4.4% throughout the whole experiment, while shoot uptake percentage ranged from 12% to 25% for caffeine at the initial concentration of 2.0 mg L^?1 to 50–62% for caffeine at the initial concentration of 0.5 mg L^?1. However, a marked decrease in the concentration of caffeine in the shoots between d-14 and d-21 suggests that caffeine may have been catabolized in the plant tissues subsequent to plant uptake and translocation.     

Ferric iron amendment increases Fe(III)-reducing microbial diversity and carbon oxidation in on-site wastewater systems

Onsite wastewater systems, or septic tanks, serve approximately 25% of the United States population; they are therefore a critical component of the total carbon balance for natural water bodies. Septic tanks operate under strictly anaerobic conditions, and fermentation is the dominant process driving carbon transformation. Nitrate, Fe(III), and sulfate reduction may be operating to a limited extent in any given septic tank. Electron acceptor amendments will increase carbon oxidation, but nitrate is toxic and sulfate generates corrosive sulfides, which may damage septic system infrastructure. Fe(III) reducing microorganisms transform all major classes of organic carbon that are dominant in septic wastewater: low molecular weight organic acids, carbohydrate monomers and polymers, and lipids. Fe(III) is not toxic, and the reduction product Fe(II) is minimally disruptive if the starting Fe(III) is added at 50–150 mg L^?1. We used ¹⁴C radiolabeled acetate, lactate, propionate, butyrate, glucose, starch, and oleic acid to demonstrate that short and long-term carbon oxidation is increased when different forms of Fe(III) are amended to septic wastewater. The rates of carbon mineralization to ¹⁴CO₂ increased 2–5 times (relative to unamended systems) in the presence of Fe(III). The extent of mineralization reached 90% for some carbon compounds when Fe(III) was present, compared to levels of 50–60% in the absence of Fe(III). ¹⁴CH₄ was not generated when Fe(III) was added, demonstrating that this strategy can limit methane emissions from septic systems. Amplified 16S rDNA restriction analysis indicated that unique Fe(III)-reducing microbial communities increased significantly in Fe(III)-amended incubations, with Fe(III)-reducers becoming the dominant microbial community in several incubations. The form of Fe(III) added had a significant impact on the rate and extent of mineralization; ferrihydrite and lepidocrocite were favored as solid phase Fe(III) and chelated Fe(III) (with nitrilotriacetic acid or EDTA) as soluble Fe(III) forms.     

A highly resolved anion-exchange chromatographic method for determination of saccharidic tracers for biomass combustion and primary bio-particles in atmospheric aerosol

An improved high-performance anion-exchange chromatography (HPAEC) with pulsed amperometric detection (PAD) method is developed and validated for simultaneous determination of atmospherically relevant sugar alcohols, monosaccharides, and monosaccharide anhydrides. The improved method enables the separation of levoglucosan and arabitol which were not or insufficiently separated by the previous HPAEC–PAD methods. Reproducibility of the method was tested for both standard solutions and atmospheric aerosol samples. The peak area relative standard deviation (RSD%) of standard solutions were found to be lower than 1.5% for consecutive analyses (n = 3) and lower than 4% for day to day variation (n = 9). The peak area RSD% of atmospheric samples with typical European wintertime monosaccharide concentrations (n = 9) was found to be similar to that of standard solutions. Limits of detection ranged from 0.002 mg L^?1 for inositol to 0.08 mg L^?1 for fructose. The developed method offers a simple, reliable and cost effective determination of atmospheric tracers for biomass combustion and for selected bio-aerosol components at sub-nanogram per cubic-meter-air concentration levels for routine analysis.     

Effects of aqueous stable fullerene nanocrystals (nC60) on Daphnia magna: Evaluation of sub-lethal reproductive responses and accumulation

Concerns exist regarding the inadvertent release of engineered nanomaterials into natural systems, and the possible negative ecosystem response that may occur. Understanding sub-lethal effects may be particularly important to determining ecosystem responses as current levels of nanomaterial release are low compared to levels projected for the future. In this work, the sub-lethal effects and bioaccumulation of water stable, nanocrystalline fullerenes as C₆₀, (termed nC₆₀) were studied in Daphnia magna, a globally distributed, parthenogenetic zooplankton. Sub-lethal concentrations were first determined for both mature mother (LD₅₀ = 0.4 mg L⁻¹) and neonate (gestating) daphnids (0.2 mg L⁻¹) in standard 48 h exposure tests. Subsequent experiments focused on the accumulation and effects (at temperatures of 18–28 °C) of nC₆₀, during the D. magna reproductive cycle. The results demonstrate that upon sub-lethal exposure, the mortality rates of gestating daphnids increased with time and developmental stage. The maturation of daughter daphnids was negatively impacted. The mother daphnids were unable to reproduce again after exposure during pregnancy, and differential bioaccumulation occurred as a function of lipid content in the daphnia with the highest accumulation level of 7000 mg kg⁻¹ wet weight. Taken together, these results not only describe the accumulation and sub-lethal effects of nC₆₀ on exposed daphnia, but also highlight the importance of sub-lethal exposure scenarios, which are critical to fully understanding the potential impact of fullerenes and other engineered nanoscale materials on natural systems.     

Heavy metal distribution in dust from elementary schools in Hermosillo,Sonora, México

The city of Hermosillo, Sonora in northern Mexico was investigated for its heavy metals content. Samples of sedimented dust in roofs from 25 elementary schools were analyzed for their contents of Ni, Cr, Zn, Cd, Co, Ba, V, Pb, Fe and Cu after digestion with nitric acid. The results of the analysis were used to determine spatial distribution and magnitude of heavy metals pollution. The results of this study reveal that heavy metals distribution is different in two areas of the city. The southern area contains higher concentrations of heavy metals than the northcentral area. The mean level of Cd in exterior dust is 5.65 mg kg⁻¹ in the southern area whereas the mean level of Cd is 2.83 mg kg⁻¹ in the northcentral area. Elevated concentrations of Zn (2012 mg kg⁻¹), Pb (101.88 mg kg⁻¹), Cr (38.13 mg kg⁻¹) and Cd (28.38 mg kg⁻¹) in roof dust were found in samples located near industrial areas. Principal component analysis (PCA) was applied to the data matrix to evaluate the analytical results and to identify the possible pollution sources of metals. PCA shows two main sources: (1) Pb, Cd, Cr and Zn are mainly derived from industrial sources, combined with traffic sources; (2) Fe, Co and Ba are mainly derived from natural sources. V and Ni are highly correlated and possibly related to fuel combustion processes. Enrichment factors were calculated, which in turn further confirms the source identification. Ba and Co are dominantly crustal. Anthropogenically added Cd, Pb, Zn and Cr show maximum enrichment relative to the upper continental crustal component. The distribution of the heavy metals in dust does not seem to be controlled only by the topography of the city, but also by the location of the emission sources.     

Mobilization of arsenic in aquifers from the Datong Basin,China: Evidence from geochemical and iron isotopic data

Iron isotope compositions of various Fe pools in aquifer sediments were measured at a known As-contaminated site in the Datong Basin, China. The δ⁵⁶Fe values of HCl-extracted poor-crystalline Fe(III) range widely from ?0.41‰ to 0.36‰. We interpret the low Fe(II)/Fe_Extractable ratios (<50%) and the negative correlation between Fe(II)/Fe_Extractable and δ⁵⁶Fe values in HCl-extracted poor-crystalline Fe to be best explained by redox cycling of Fe induced by microbial Fe(III) reduction. However, the high Fe(II)/Fe_Extractable ratios (?70%) and positive correlation between Fe(II)/Fe_Extractable and δ⁵⁶Fe values for HCl-extracted poor-crystalline Fe indicates production of sulfides (FeSs). The δ⁵⁶Fe values of crystalline Fe(III) extracted by reductant appears to be comparatively small varying from ?0.01‰ to 0.24‰, which is consistent with the δ⁵⁶Fe values for ferric oxides/hydroxides having undergone microbial Fe(III) reduction. The Fe isotope composition of various Fe pools shows the transformation between crystalline Fe(III) and poor-crystalline crystalline Fe(III) and the secondary Fe(II) phases has already occurred or is occurring in aquifer sediments. More importantly, there is a significant difference in the As concentrations in crystalline Fe(III) oxides/hydroxides and HCl-extracted Fe phases. The concentrations of As range from 1.6 to 29.9 mg kg^?1 and from 0.6 to 3.0 mg kg^?1, for crystalline Fe(III) and HCl-extracted Fe phases respectively. Accordingly, the transformation of Fe minerals induced by microbial Fe(III) reduction can contribute to the mobilization of As. This study is the first to examine the Fe isotope compositions in high As aquifer sediments; the results show that the Fe isotope would be an important tool in demonstrating the enrichment of As in groundwater.