Adsorption in combination with ozonation for the treatment of textile waste water: a critical review

Intrusion of synthetic textile dyes in the ecosystem has been recognized as a serious issue worldwide. The effluents generated from textiles contain large amount of recalcitrant unfixed dyes which are regarded as emerging contaminants in the field of waste water study. Removal of various toxic dyes often includes diverse and complex set of physico-chemical, biological and advanced oxidation processes adopted for treatment. Adsorption in itself is a well-known technique utilized for treatment of textile effluents using a variety of adsorbents. In addition, ozonation deals with effective removal of dyes using high oxidising power of ozone. The review summarizes dye removal study by a combination of ozonation and adsorption methods. Also, to acquire an effective interpretation of this combined approach of treating wastewater, a thorough study has been made which is deliberated here. Results assert that, with the combined ability of ozone and a catalyst/adsorbent, there is high possibility of total elimination of dyes from waste water. Several synthetically prepared materials have been used along with few natural materials during the combined treatment. However, considering practical applicability, some areas were identified during the study where work needs to be done for effective implementation of the combined treatment.

Open image in new window

     

Mutagenicity assessment of textile dyes from Sanganer (Rajasthan)

Sanganer town, district Jaipur (Rajasthan, India) is famous worldwide for its hand block dyeing and textile printing industries. These industries use a variety of chemicals and dyes during processing and finishing of raw materials. Most of the textile dyes used by these industries have not been evaluated for their impact on health and the environment. The workers in these industries are exposed to such dyes with no control over the length and frequency of exposure. Further, untreated and sometimes even treated effluents from these industries are released into surface waters of Amani Shah drainage or through the drainage systems, seep into the ground water and adjoining water bodies. Since many textile dyes are known carcinogens and mutagens, a complete evaluation of the safety of these dyes in the human environment must include an evaluation of their genotoxicity or mutagenicity. A total of 12 textile dyes from Sanganer were tested for their mutagenicity, by Ames Salmonella reversion assay using strain TA 100 of Salmonella typhimurium. Only 1 dye, Red 12 B showed absence of mutagenic activity. The remaining 11 dyes were all positively mutagenic.     

Polyurethane for removal of organic dyes from textile wastewater

Synthetic organic dyes are extensively used in consumer products from textile to pharmaceuticals. A large amount of organic dyes is ultimately discharged as effluent into water bodies, thus posing a serious threat to environment and life. Therefore, removal of dyes from water bodies is needed. To address this problem, various synthetic and natural materials have been used to adsorb dyes. Here, we review the application of polyurethane for removal of organic dyes. First, we review the application of simple and modified polyurethane as efficient and economic adsorbents for dyes. Secondly, we review the polyurethane-based membranes for separation and adsorption of various dyes. Thirdly, we describe polyurethane composites with improved efficiency of dyes removal. Finally, we review the bioremediation of dyes where polyurethane has been proven as an excellent inert support.     

Analysis of carcinogenic and mutagenic aromatic amines: An overview

The aromatic amines represent a category of considerable importance in terms of their broad industrial utilization per se as well as intermediates in the manufacture, of a wide variety of dyes which have been broadly used in textile, leather, plastic and paper products as well as in permanent and semi‐permanent coloring products. The exposure to these agents, a number of which are carcinogenic and/or mutagenic, can occur primarily via skin contact and inhalation and covers the spectrum of occupational, consumer and the general public. This overview will principally highlight a number of the recently applied methodologies (including GLC, HPLC, and SPF) for the analyses of benzidines, naphthylamines, aminobiphenyls, methylene bis(2‐chloro‐aniline); 2,4‐diaminotoluene and 2,4‐diaminoanisole with a focus on their determination in environmental and occupational samples.     

Removal of textile dyes from aqueous solution using PEG based aqueous biphasic system

Aqueous biphasic systems (ABSs) composed of polyethylene glycol (PEG) and salt have been examined for the removal of textile dyes from textile effluent. The partitioning of four dyes namely Cibacron Scarlet LS 2G, Rhodamine B, Brown ERN and Astacryl Red 3B was investigated. All the dyes studied were found to partition into the upper PEG rich layer. Sodium carbonate was found to be the most efficient salt for extraction of dyes. Sodium sulphate was found to be marginally less efficient. Sodium chloride did not cause partitioning at all. Partitioning occurred at all pH and was almost pH independent. The partitioning of these dyes in larger volume (100?mL) ABS was also demonstrated. Studies using dye bath effluent were also conducted. In all cases very high efficiencies consistently above 98% were obtained.     

Studies on the utility of plant cellulose waste for the bioadsorption of crystal violet dye

Several synthetic dyes employed in textile and food industries are discharged into aquatic environment. These visible pollutants in water damage environment, as they are carcinogenic and toxic to humans. The use of cost effective and ecofriendly plant cellulose based adsorbents have been studied in batch experiments as an alternative and effective substitution of activated carbon for the removal of toxic dyes from waste water. Adsorbents prepared from sugarcane baggase, were successfully used to remove certain textile dye such as crystal violet from an aqueous solution. The present investigation potentiate the use of sugarcane baggase, pretreated with formaldehyde (referred as Raw Baggase) and sulphuric acid (referred as Chemically Activated Baggase), for the removal of crystal violet dye from simulated waste water. Experiments were carried out at neutral pH with various parameters like dye concentration, temperature, contact time and adsorbent dosage. Efficiency of raw baggase was found better than chemically activated baggase for adsorption of crystal violet dye. The data obtained perfectly fits in the Freundlich adsorption isotherm.     

Effect of carbon and nitrogen source amendment on synthetic dyes decolourizing efficiency of white-rot fungus, Phanerochaete chrysosporium

Decolourization activity of Phanerochaete chrysosporium for three synthetic dyes viz., congo red, malachite green and crystal violet and impact of additional carbon and nitrogen supply on decolourization capacity of fungus were investigated. Maximum decolourizing capacity was observed up to 15 ppm. Addition of urea as nitrogen source and glucose as carbon source significantly enhanced decolourizing capacity (up to 87%) of fungus. In all the cases, both colour and COD were reduced more in non-sterilized treatments as compared to sterilized ones. Significant reductions in COD content of dye solutions (79-84%) were recorded by fungus supplied with additional carbon and nitrogen. A highly significant correlation (r = 0.78, p < 0.001) between colour and COD of dye solutions was recorded. Thus, a readily available carbon and nitrogen source is imperative to enhance the bioremediation activity of this fungus which has been the most suitable for synthetic dyes and textile industry wastewater treatment.     

Chitosan-polypropylene imine dendrimer hybrid: a new ecological biomordant for cochineal dyeing of wool

The classical use of synthetic dyes is causing issues of environmental pollution and heath risk. As a consequence natural dyes are gaining interest, but the use of natural dyes still includes toxic reagents such as metals as mordants and acids to enhance color and yield. Therefore, we designed a new chitosan-polypropylene imine dendrimer hybrid at 0–2000 mg/L to treat wool before dyeing with cochineal. We compared dye exhaustion, color depth, color characteristics, and color fastness of the new process with dyed pristine and metal mordanted wool. Results show that wool pretreatment improved dye exhaustion from 48 to 88 %, shifted saturation point toward lower dye concentration from 3000 to 1000 mg/L, and improved color depth from 13.68 for pristine wool and 15.17 for metal mordanted wool to 23.89 for the new process.     

Biotransformation of phenolics with laccase containing bacterial spores

Treatment of effluents containing phenols such as textile dyes with fungal laccases is usually limited to the acid to neutral pH range and moderate temperatures. Here we demonstrate for the first time that spore-bound laccases which are stable at high temperatures and pH values can be used for phenolic dye decolorisation. Laccase containing spores from Bacillus SF were immobilized on alumina pellets. Both immobilized and free spores were able to completely decolorize the common textile dyes Mordant Black 9, Mordant Brown 96/Mordant Brown 15, and Acid Blue 74 within 90 min of incubation time and decolorized solutions were successfully used in re-dyeing.     

Depollution of indigo dye by anodic oxidation and electro-Fenton using B-doped diamond anode

Hazardous wastes are generated in the synthesis of dyes and pigments applied in industries. Efficient methods are thus needed to clean wastewaters. Here, we use anodic oxidation and electro-Fenton with B-doped diamond anode to degrade the synthetic dye indigo in aqueous sodium dithionite. Results show the near-complete mineralization of the dye within 80 min at 500 mA. Mineralization was faster by electro-Fenton than anodic oxidation. The second-order rate constant (k) for the reaction of indigo with ^·OH was measured as 4.03 × 10⁹ M^?1 s^?1 at pH 3.0 and was compared with the rate constants of reactions between dyes and ^·OH. The results clearly demonstrate that both electro-Fenton and anodic oxidation can be used to depollute dyes in textile effluent with high efficiency and low cost. The main oxidant, ^·OH, being a non-selective reagent, the method could be applied to degrade other organic pollutants.     

A study on genotoxicity of textile dyeing industry effluents from Rajshahi,Bangladesh, by the Allium cepa test

Textile dye effluents are believed to be toxic as they might exert various harmful effects on living organisms including genotoxicity. These effluents are the main source of direct and continuous input of pollutants into the aquatic ecosystems. In this study, dye effluents from a local silk dyeing industry were analysed for their genotoxic potential by the Allium cepa genotoxicity test. The A. cepa test is characterised as a genotoxicity test where the roots of A. cepa are grown in different concentrations of the test material. The macroscopic results clearly showed that the toxicity of the dye effluents prompted A. cepa root growth inhibition, and this effect increased with higher concentrations of the effluents. At the cellular level, no dividing cells were found at higher concentrations such as 60%, 80% and 100% of the effluents. However, at a lower concentration of 20%, dividing cells were identified, although the mitotic index was much lower than that of the control. Microscopic analysis showed that the dye effluents induced chromosomal aberrations at significant levels. Taken together, these results revealed that the textile dyeing industry effluents are toxic to eukaryotic cells and these dyes have genotoxic properties that can potentially lead to cancer development and adverse health conditions.     

Removal of textile dyes from water by the electro-Fenton process

An environmentally friendly electrochemical treatment, electro-Fenton process, was applied to the depollution of a synthetic dismissal composed of three dyes, yellow drimaren, congo red and methylene blue, frequently used in textile and dyehouses. Here, we show that those dyes and their mixture are quickly degraded under current controlled electrolysis conditions, leading to an almost complete mineralization. The results show the efficiency of electro-Fenton process to quickly degrade aqueous effluents polluted by synthetic organic dyes.     

Decolorization and degradation of acid dyes mediated by salt fractionated turnip ( Brassica rapa ) peroxidases

Peroxidases from turnip roots (524?U?g^?1 of vegetable) were highly effective in decolorizing acid dyes having wide spectrum chemical groups. Dye solutions, containing 40–170?mg?dye?L^?1, were treated by turnip peroxidases (TP) (specific activity of 122.0?U?mg^?1 proteins). These enzymes were able to decolorize most of the acid dyes in the presence of 2.0?mM 1-hydroxybenzotriazole (HOBT). Increasing concentration of enzyme and time in the absence of HOBT did not influence dye decolorization. The rate of decolorization was significantly enhanced when HOBT was added to the decolorizing solutions. The decolorization of all the used dyes was maximum at pH 5.0 and 40°C. Complex mixtures of dyes were significantly decolorized when treated with enzyme in the presence of HOBT (2.0?mM). Phytotoxicity test based on Allium cepa root growth inhibition has shown that majority of the TP-treated dye product were not more toxic than their parent dye. Kinetic parameters of the TP with various dyes showed that this enzyme has highest affinity for Acid Yellow 42. This study demonstrates that the peroxidase/mediator system was an effective biocatalyst for the treatment of industrial effluents from textile, dye manufacturing, dyeing and printing industries or complex mixtures of dyes.     

High adsorption of dyes by water hyacinth fixed on alginate

Pollution from synthetic dyes has emerged to be a significant environmental issue over the past few decades. This has mainly been triggered by the increasing global dye production, possible toxic effects, undesirable colour and high persistence in the environment. Biosorption, which involves dye removal from aqueous solution by passive linkage in live and dead biomass, has shown great potential in removing dyes from aquatic environments. Among aquatic macrophytes, water hyacinth, Eichhornia crassipes, has shown great potential as a biosorbent. In this work, we investigated the removal of two basic dyes, methylene blue and crystal violet, using E. crassipes immobilized on alginate. Results showed that the Langmuir model better described the equilibrium sorption data when compared to the Freundlich model. Optimum amounts of methylene blue and crystal violet dyes were adsorbed in the alkaline pH range (8–10), 8 % biomass dose, and the amount of dye removed increased with increasing initial dye concentration. The equilibrium monocomponent adsorption capacities for the dyes were 111.1 and 43.5 mg/g, while the binary adsorption capacities were 26.1 and 11.6 mg/g for methylene blue and crystal violet, respectively. To conclude, we show for the first time that E. crassipes fixed on alginate beads can uptake and adsorb methylene blue and crystal violet dyes very effectively in batch systems and show great potential for dye removal from aquatic environments.     

Biological Decolorization of C.I. Basic Green 4 Solution by Chlorella sp.： Effect of Operational Parameters

In recent years, the ability of microorganisms to decolorize textile wastewater has received great attention due to the environmental persistence and toxicity of these pollutants. In this paper biological decolorization of triphenylmethane dye, C.I. Basic Green 4 (BG 4), by Chlorella species was investigated. The effect of operational parameters (temperature, pH, initial dye concentration and algal concentration) on decolorization efficiency was examined. Results indicated that the desired initial pH was 9. The stability and efficiency of the algae in long-term repetitive operations were also examined. Michaelis-Menten kinetics was employed to describe the apparent correlation between the decolorization rate and dye concentration. The optimal kinetic parameters, Vmax (specific decolorization rate) and Km (maximum specific decolorization rate) were 4.6 mg dye g cell-1 h-1and 151.0 mg L-1, respectively. Fig 10, Tab 2, Ref24     

Treatment of textile dye wastewater using ozone combined with photocatalyst

Ozonolysis combined with photocatalysis was used as a new approach for the treatment of textile dye wastewater containing azo dyes. The color reduction was very fast when only ozone was used for the treatment, but a 90% Total Organic Carbon (TOC) reduction was obtained only during a combined treatment. Reactive Black 5 dye containing two different percentages of NaCl was used for the experiment. The color reduction was fast in the neutral and basic pH. However for a fast TOC reduction acidic pH was found to be more effective. On‐line UV‐Vis spectrophotometry was used to measure the color reduction.     

Removal of dyes from water using crosslinked aminomethane sulfonic acid based resin

A new polymeric resin with amino sulfonic acid pendant functions has been prepared for the extraction of acidic and basic dyes from water. Beaded polymer supports were prepared by suspension polymerization of vinyl benzyl chloride (0.9 mol) and ethylene glycol dimethacrylate (0.1 mol). The resulting copolymer beads were modified with amino methane sulfonic acid. The dye adsorption capacity of the resin was found as 0.16 g dye/g resin for ramazol black and 0.15 g dye/g resin for crystal violet. The pH depending measurements and dye sorption kinetics of the resin were also investigated.     

Photo detoxification of solubilized vat dye effluent using different pH ranges

The removal of solubilized vat dye effluent using photo detoxification method was studied at various pH ranges. Experiments were carried out with synthetic effluent using total dye concentrations of 50, 100, 200, 300, and 350 mg/L. In sunlight photo oxidation, the original soluble vat dye is precipitated and can be filtered and reused by the textile industries. The effect of the different concentrations (1,000, 2,000, 3,000 mg/L) of total dissolved solids on the removal of vat dye was also carried out in the photo detoxification process. The efficiency of the dye removal was found to be 99 %.     

Anaerobic decolorization of an azo dye by a mixed culture

Wool dyeing wastewater contains xenobiotic compounds that can be removed by biotechnological processes. Studies on various dyes showed that anaerobic processes are suitable to alter azo dyes as a first step of the biodegradation process. These compounds are reduced by anaerobic consortia to aromatic amines and its ultimate degradation can be achieved by a further aerobic treatment.

Studies on degradation rate of an wool acid dye were performed in batch systems inoculated with anaerobic biomass. A commercial diazo dye, Acid Red 73, was added to the synthetic medium in which glucose was used as sole carbon source.

Results indicated that the Acid Red 73 was partially degraded by a mixed culture of anaerobic bacteria and a decolorization of 90% was obtained. Kinetics studies on removal of the colour showed that the decolorization rate was several times faster than the degradation rate of glucose for a range of dye concentrations between 60 mg/L and 400 mg/L. A first order kinetic model was used for dye concentrations up to 200 mg/L. For higher concentrations a model similar to the Michaelis‐Menten equation was better fitted to the experimental data.     

NKY功能化树脂静态吸附混合染料的研究

探讨了NKY功能化树脂对混合染料(活性艳蓝：KN-R和活性艳橙K-GN)的静态吸附行为．结果表明：NKY树脂吸附单组分染料的能力大于其对混合染料的吸附，而且对混合体系中的染料有一定的选择性，吸附KN-R的速率较大．从动力学研究来看，NKY对混合染料的吸附速率其决定步骤是液膜扩散．等温曲线的结果显示，NKY对混合染料中每种组分的吸附行为同吸附单组分体系的类似，同时，随温度的升高，吸附速率常数增大，标准自由能变的绝对值增大。